Database Info

[Q] stuck in diag mode

i have a droid 2 global i put into diag mode by holding "t" while powering on flashed to metropcs using dfs cdma tool (bad idea) when done hooked up a second droid 2 global used dfs cdma tool to flash to metropcs when done realized neither phone had working internet then realized i dont have to hold "t" to put diag mode they are both still in diag mode i have restored with sbf but still stuck in diag mode phone works for talk and txt but data wont work with it in diag mode can someone help me to get them out of diag mode thanks

no need to hold "t" to enter diag mode, just change the usb mode to "pc mode" at the notification bar
because the motorola "network" will always on

un1ocked said:
no need to hold "t" to enter diag mode, just change the usb mode to "pc mode" at the notification bar
because the motorola "network" will always on
Click to expand...
Click to collapse
are you sure because i have flashed alot of these globals to metropcs and i always had to hold t to put in diag mode and i have three rite now all with pc mode selected only the two i used dfs on stay in diag mode and after i flash internet doesnt work i have flashed both of them to metropcs before and everything worked now it stays in diag mode and data dont work the the one i didnt use dfs on when i power on holding t i get ip 192.168.16.1 and can make port with HW Virtual Serial Port and use qpst after reboot without holding t no ip cant make port even with pc mode the other two always get ip i dont get it
nevermind quess i was tripping, your right no need for t. i dont know why i cant get data working

My phone can't connect to QPST !

I enabled diag and installed htc diag drivers as mentioned in other thread,my port is 110 but qpst can't see it ,I tryed to enter port 110 manually but qpst says:
what should I do to connect it ? thank you

anyone help me please

LG LS755 How to reset MSL Code

i have unlocked LS755 and i get the SPC code by Octopus
i need to reset SPC to 000000 and i know it can by done by DFS or cdma work shope.
i enable the diag mode after get the spc by octopus,at DFS seasson in com port it show LG serial port but when i select com port
the DFS cannot recognize it and the log menu it show
device offline
please can you tell me a trick that i can reset SPC/MSL code to 000000 without DFS or CDMA WORK SHope
NOTE:my LS755 CPU it LG MTK,its not a Qualcom .

Did you figure this out ? Im trying to write msl/spc to 000000 also but as it being an MTK device it wont connect to Cdma workshop or dfs as they are Qualcomm tools i believe.

Does anybody know the New Method of enale diag mode Qualcomm devices

Dear All
the old days of enabling diag port is gone now. nowdays oppo, realme, vivo and Mi using new patches to strick diag mode enable.
i want to know the new possiblities to enable diag port. as till last update oppo A3s ad Realme use *928# for diag mode enable which is stick with wifi test mode (FTMActivity) butnow that is also patched.
any new information about these handsets. its most important to repair BB and restore Qcn etc.:fingers-crossed:
Note: do not advice full flash etc. as it is not possible in oppo and realme now, they need Tool with authorised User ID and Password.

anyone knows the diag port code ?

Oppo engineering mode, Oppo Diag Port is enabled via *#649010# (Password - 6776)

Question Imei 000.. Repair

I'm in trouble trying to restoring original imei, My imei is 0000 now and i can't manage to fix.
I have tried a bunch of things, Got stuck trying to connect the phone in diag mode, so i can use qfil to rewrite.
Any help or easier method?
Thanks

Is your phone a US phone? or GSM? sm-S908 | U | F | B?

Where and from whom did you buy your phone? My thoughts are that someone pulled a fast one and that you might have been scammed..

Sm-s908e
lost imei after flashing rom
Did not made Qcn backup

Alright, check this post out...
also check out this video of a dude rebooting into EDL mode, which I believe is the mode of function that you're looking for.
This is the Youtube video.
Dial:
*#9900#
Choose Upload mode. I think it's different if your model is american. I'm about to try it out..
You will need the qualcomm 9008 drivers.

Yeah i saw that, but is not the same
"Diag Port [Qualcomm HS-USB Android Diag 901D ] and Qualcomm HS-USB QDLoader 9008 – both are separate things. Android Diag 901D is a diag port while the HS-USB QDLoader 9008 is an emergency download mode [known as EDL mode]."
How to Enable Or Disable Diag Mode on Qualcomm device using ADB [Works on Vivo, Xiaomi, Oppo and more]
Here is the guide on How to Enable Or Disable Diag Mode on Qualcomm device using ADB [Works on Vivo, Xiaomi, Oppo and more]. Read full detail
www.getdroidtips.com
But i think i gotta get a cable to try in Edl as i tryed all i have found
i'm trying to flash other rom's to search for any change
Appreciate your help.