i have a droid 2 global i put into diag mode by holding "t" while powering on flashed to metropcs using dfs cdma tool (bad idea) when done hooked up a second droid 2 global used dfs cdma tool to flash to metropcs when done realized neither phone had working internet then realized i dont have to hold "t" to put diag mode they are both still in diag mode i have restored with sbf but still stuck in diag mode phone works for talk and txt but data wont work with it in diag mode can someone help me to get them out of diag mode thanks
no need to hold "t" to enter diag mode, just change the usb mode to "pc mode" at the notification bar
because the motorola "network" will always on
un1ocked said:
no need to hold "t" to enter diag mode, just change the usb mode to "pc mode" at the notification bar
because the motorola "network" will always on
Click to expand...
Click to collapse
are you sure because i have flashed alot of these globals to metropcs and i always had to hold t to put in diag mode and i have three rite now all with pc mode selected only the two i used dfs on stay in diag mode and after i flash internet doesnt work i have flashed both of them to metropcs before and everything worked now it stays in diag mode and data dont work the the one i didnt use dfs on when i power on holding t i get ip 192.168.16.1 and can make port with HW Virtual Serial Port and use qpst after reboot without holding t no ip cant make port even with pc mode the other two always get ip i dont get it
nevermind quess i was tripping, your right no need for t. i dont know why i cant get data working
Related
I tried to switch my rooted and rom'ed phone to the att froyo and my phone hung. I can get into download mode, but odin doesnt recognize my phone. I can only get odin to find my phone when it is the reboot screen. I have tried I have tried to use one click from AIO but when I am in download it tells me usb debugging is off and at this point I cant get to any ui to switch it on. Anyone have any idea how to switch it on?
dl mode does not require usb debugging.
Couple things
Have you used odin before?
Have you tried multiple ports?
Can you get into recovery?
Do you have a rom zip on your sd?
As the title says, anybody have any luck using QPST with Windows Phones? I managed to get my Trophy into bootloader mode and recognized as "HTC USB Sync" but unfortunately wasn't able to configure it for connection via USB serial.
This QPST working for all Devce Qualcomm.
but not for all....
have you try to dial ##MFG# ? then enable diag mode..lucky you, Verizon MSL is 000000 .. I'm on Sprint, which is not using standard MSL
Yes, you must run phone in Diagnostic Mode etc.
I could get my focus into usb serial mode, but unfortunately Samsung Driver pack didn't even have the driver for it. Also the phone recognized as "PROTOTYPE something ... " in device manager.
minori_aoi said:
I could get my focus into usb serial mode, but unfortunately Samsung Driver pack didn't even have the driver for it. Also the phone recognized as "PROTOTYPE something ... " in device manager.
Click to expand...
Click to collapse
You not must install new driver etc.
All Phone Quallcom, have a Factory Test Mode, then in this moede you connect yours device in QPST. This not a bootloader mode, this program reconnect device from FTM -> to BL etc..
You must have a. hex file, for your device.
for me this is a NPRG8650.hex - of course, is needed only when, you want reupload partition etc.
Im having trouble trying to get my S4 sprint to connect to cdma workshop...When i put the phone in diag mode and click pda it works and connects to cdma and cdma reads it but the password for cdma is different....and when i put it in cdma- modem in diag mode it shows up on the port but wont read the s4....ive flashed before and this is the first timer.....please help me
Hi guys, long story short.
Installed Android 12 Beta, wanted to go back, tried to go back the the oxygen updater = phone fully bricked.
I can start the mobile with the first android start-up screen coming to live then it dies, I can access fastboot with vol up+down+power pressed but I can't do anything more.
I tried EVERYTHING to get MSMDownload tool to recognize my mobile but it does not, I don't think EDL mode is working for me.
Any ideas? I've read all the threads here I think and nothing works.
Couldn't connect to msm op9 global. /Now connecting. !
Ive uploaded signed Qualcomm driver's I found that install on windows and don't turn on test mode. These work. Then afterwards toggle USB options with device plugged in PC ,change from charging to PTP and let it automatically install drivers...
forum.xda-developers.com
mattie_49 said:
Couldn't connect to msm op9 global. /Now connecting. !
Ive uploaded signed Qualcomm driver's I found that install on windows and don't turn on test mode. These work. Then afterwards toggle USB options with device plugged in PC ,change from charging to PTP and let it automatically install drivers...
forum.xda-developers.com
Click to expand...
Click to collapse
I've actually tied that, does not work. I cannot get the Qualcomm to show in my device manager at all, the only thing I get is when I go to fastboot I get the Android Bootloader Interferance to show.
please read title and help
restore it with msm tool
how to connect the phone screen is black
If the screen is black it may already be in EDL mode. Plug it into a computer and check device manager for something like "Qualcomm HS-USB QDLoader." If that's there, you just need to get the MSM Tool for your model and make sure you have the right drivers.
If you can't get it into EDL mode, you will have to file a warranty claim with OnePlus, no other choice. Mess around with the buttons and see if you can get it to reboot or try the EDL key combo (hold volume up and down and while holding plug in the USB cable that's plugged into the computer). You don't have a chance of repairing it yourself if you can't get into EDL, end of story.
pc recognizing this Qualcomm HS-USB QDLoader in device manager but in msm tool it is showing n/a.and also in device manager it is showing triangle error on device.i am using official driver provided by msm tool poster.
Need some help unbricking (solved)
I bricked my OP9 doing some stuff today. It will not turn on, access bootloader, or anything. When I plug it into my computer, it makes a connecting sound, waits 10 seconds, then disconnect sound, then repeats the process. I tried using MSM...
forum.xda-developers.com
It's can help you
Well you're not the only one I guess. That happened to me as well. So perhaps, Alhamdulillah I can help you out
The screen still remains black that means your phone is in the EDL and you'll need to get it out of it and then get back to EDL again to use msm.
Anyway, hold the power + volume up + down all simultaneously for a while. It'll take you to the Fastboot mode. Don't worry, it definitely will take you to the Fastboot mode.
Then you can do the rest of the flashing as you wish