Im having trouble trying to get my S4 sprint to connect to cdma workshop...When i put the phone in diag mode and click pda it works and connects to cdma and cdma reads it but the password for cdma is different....and when i put it in cdma- modem in diag mode it shows up on the port but wont read the s4....ive flashed before and this is the first timer.....please help me
Related
i have a droid 2 global i put into diag mode by holding "t" while powering on flashed to metropcs using dfs cdma tool (bad idea) when done hooked up a second droid 2 global used dfs cdma tool to flash to metropcs when done realized neither phone had working internet then realized i dont have to hold "t" to put diag mode they are both still in diag mode i have restored with sbf but still stuck in diag mode phone works for talk and txt but data wont work with it in diag mode can someone help me to get them out of diag mode thanks
no need to hold "t" to enter diag mode, just change the usb mode to "pc mode" at the notification bar
because the motorola "network" will always on
un1ocked said:
no need to hold "t" to enter diag mode, just change the usb mode to "pc mode" at the notification bar
because the motorola "network" will always on
Click to expand...
Click to collapse
are you sure because i have flashed alot of these globals to metropcs and i always had to hold t to put in diag mode and i have three rite now all with pc mode selected only the two i used dfs on stay in diag mode and after i flash internet doesnt work i have flashed both of them to metropcs before and everything worked now it stays in diag mode and data dont work the the one i didnt use dfs on when i power on holding t i get ip 192.168.16.1 and can make port with HW Virtual Serial Port and use qpst after reboot without holding t no ip cant make port even with pc mode the other two always get ip i dont get it
nevermind quess i was tripping, your right no need for t. i dont know why i cant get data working
Hi everybody, please someone could help me. I'm following the instructions
to recover my GS3 Imei, but in the driver install I stops because I can't connect the
phone like a serial port only gets connected like a usb modem.
I tried several drives with no results. Besides I can´t obtain the secret
menu with *#7284#, only get two options
UART
- modem
-PDA
-LTE
USB
-modem
-PDA
To obtain the secret menu I've installed the Geek tool
Please help me to make my computer reconize like a usb serial port, I've tried several PCs with the same results
My system is Win7 ultimate x86
When you select (both modems) that should give you a serial port.
Is it a Verizon or Sprint GS 3?
Sent from my EVO using xda premium
Chynadutch said:
When you select (both modems) that should give you a serial port.
Is it a Verizon or Sprint GS 3?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
With both options selected in modem only apear like usb modem, not like a USB serial port. I bought the phone in UK, don't know if it's a verizon or sprint.
Greetings
absurd problem not let me go
Hi, I have the same problem, I can't connect the phone like a serial port only gets connected like a usb modem.
AP: XXXXXX.I9300XXBLFB
CSC: I9300PHEBLG1
Company: Yoigo (SPAIN)
With stock firmware from SamMobile.
I think one solution could be to install Verizon or Sprint XXXXXX.I9300XXBLFB firmware, but this not exist, and if we install other Verizon or Sprint firmaware with different AP the phone can die.
I read all the topics on the forum about this problem and none reaches a correct concluision. I have installed the correct drivers for Samsung USB. Someone can help with this issue please?
Hello, I have a problem with the mobile phone, the phone does not work and is not included at all the only thing that lets you know that he is alive at all, is that my computer picks it up but nothing but the error does not occur drivers (I found the driver under MTS 962 and AiO from Roddie (phone picks them up, but the recovery mode, and so do not grab the phone)
up
up:crying:
Hello,
I am trying to flash a Kyocera hydron icon (c6730) with android 4.4.2, from Sprint, to another carrier outside of the US. I am using DFS tool v 15.12.301. The problem I am having is that DFS will not connect to the phone. Drivers are installed, pc recognizes the phone, even DFS will show the name of the phone and the COM where the phone is connected to but when I click the connect buttom in DFS it will not connect. What could be wrong or is there another way to load the PRL file to the phone? I really appreciate any help.
Thanks is advance.
why cant read ls755 with cdma dfs for diag and mack 3g
the port cant appear id for mobile and name mobile in dfs
can any help me
It is mtk based not qualcomm based thats why u cant connect to dfs
fan360 said:
It is mtk based not qualcomm based thats why u cant connect to dfs
Click to expand...
Click to collapse
thin how we can set apn for cdma?
any one can help with LS755,
how do I configure mtk to connect to dfs?
leodar222 said:
any one can help with LS755,
how do I configure mtk to connect to dfs?
Click to expand...
Click to collapse
Not possible connect mtk phone to dfs ( dfs only working with qualcomm). This phone excellent work with ruim card !