Hello,
I am trying to flash a Kyocera hydron icon (c6730) with android 4.4.2, from Sprint, to another carrier outside of the US. I am using DFS tool v 15.12.301. The problem I am having is that DFS will not connect to the phone. Drivers are installed, pc recognizes the phone, even DFS will show the name of the phone and the COM where the phone is connected to but when I click the connect buttom in DFS it will not connect. What could be wrong or is there another way to load the PRL file to the phone? I really appreciate any help.
Thanks is advance.
Related
As the title says, anybody have any luck using QPST with Windows Phones? I managed to get my Trophy into bootloader mode and recognized as "HTC USB Sync" but unfortunately wasn't able to configure it for connection via USB serial.
This QPST working for all Devce Qualcomm.
but not for all....
have you try to dial ##MFG# ? then enable diag mode..lucky you, Verizon MSL is 000000 .. I'm on Sprint, which is not using standard MSL
Yes, you must run phone in Diagnostic Mode etc.
I could get my focus into usb serial mode, but unfortunately Samsung Driver pack didn't even have the driver for it. Also the phone recognized as "PROTOTYPE something ... " in device manager.
minori_aoi said:
I could get my focus into usb serial mode, but unfortunately Samsung Driver pack didn't even have the driver for it. Also the phone recognized as "PROTOTYPE something ... " in device manager.
Click to expand...
Click to collapse
You not must install new driver etc.
All Phone Quallcom, have a Factory Test Mode, then in this moede you connect yours device in QPST. This not a bootloader mode, this program reconnect device from FTM -> to BL etc..
You must have a. hex file, for your device.
for me this is a NPRG8650.hex - of course, is needed only when, you want reupload partition etc.
Hi everybody, please someone could help me. I'm following the instructions
to recover my GS3 Imei, but in the driver install I stops because I can't connect the
phone like a serial port only gets connected like a usb modem.
I tried several drives with no results. Besides I can´t obtain the secret
menu with *#7284#, only get two options
UART
- modem
-PDA
-LTE
USB
-modem
-PDA
To obtain the secret menu I've installed the Geek tool
Please help me to make my computer reconize like a usb serial port, I've tried several PCs with the same results
My system is Win7 ultimate x86
When you select (both modems) that should give you a serial port.
Is it a Verizon or Sprint GS 3?
Sent from my EVO using xda premium
Chynadutch said:
When you select (both modems) that should give you a serial port.
Is it a Verizon or Sprint GS 3?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
With both options selected in modem only apear like usb modem, not like a USB serial port. I bought the phone in UK, don't know if it's a verizon or sprint.
Greetings
absurd problem not let me go
Hi, I have the same problem, I can't connect the phone like a serial port only gets connected like a usb modem.
AP: XXXXXX.I9300XXBLFB
CSC: I9300PHEBLG1
Company: Yoigo (SPAIN)
With stock firmware from SamMobile.
I think one solution could be to install Verizon or Sprint XXXXXX.I9300XXBLFB firmware, but this not exist, and if we install other Verizon or Sprint firmaware with different AP the phone can die.
I read all the topics on the forum about this problem and none reaches a correct concluision. I have installed the correct drivers for Samsung USB. Someone can help with this issue please?
KYOCERA JAX How do I get into FTM or DM mode? My phone USB is enable .I download and instal drivers from KYOCERA website( ks02us).I see in devise menage Kyocera modem drivers but DFS ,CDMA WORKSHOP 2.7 ,KYOSERA WIRELESS PST doesn't see my phone.How i connect phone to software to get AAA code.I make clone from kyocera s1360 to HTS EVO 3D.Clone is working I can call and send mesege,but DATA doesn't work I get error 67 message.So i thing i need AAA CODE to finish my clone.
Hello, I put my electrify m in bp tools mode and tried to connect it to get DFS to recognize it, but it won't. I installed motorola modem drivers, but my computer still wants more drivers. Any advice is appreciated.
why cant read ls755 with cdma dfs for diag and mack 3g
the port cant appear id for mobile and name mobile in dfs
can any help me
It is mtk based not qualcomm based thats why u cant connect to dfs
fan360 said:
It is mtk based not qualcomm based thats why u cant connect to dfs
Click to expand...
Click to collapse
thin how we can set apn for cdma?
any one can help with LS755,
how do I configure mtk to connect to dfs?
leodar222 said:
any one can help with LS755,
how do I configure mtk to connect to dfs?
Click to expand...
Click to collapse
Not possible connect mtk phone to dfs ( dfs only working with qualcomm). This phone excellent work with ruim card !