Hello, I put my electrify m in bp tools mode and tried to connect it to get DFS to recognize it, but it won't. I installed motorola modem drivers, but my computer still wants more drivers. Any advice is appreciated.
Related
As the title says, anybody have any luck using QPST with Windows Phones? I managed to get my Trophy into bootloader mode and recognized as "HTC USB Sync" but unfortunately wasn't able to configure it for connection via USB serial.
This QPST working for all Devce Qualcomm.
but not for all....
have you try to dial ##MFG# ? then enable diag mode..lucky you, Verizon MSL is 000000 .. I'm on Sprint, which is not using standard MSL
Yes, you must run phone in Diagnostic Mode etc.
I could get my focus into usb serial mode, but unfortunately Samsung Driver pack didn't even have the driver for it. Also the phone recognized as "PROTOTYPE something ... " in device manager.
minori_aoi said:
I could get my focus into usb serial mode, but unfortunately Samsung Driver pack didn't even have the driver for it. Also the phone recognized as "PROTOTYPE something ... " in device manager.
Click to expand...
Click to collapse
You not must install new driver etc.
All Phone Quallcom, have a Factory Test Mode, then in this moede you connect yours device in QPST. This not a bootloader mode, this program reconnect device from FTM -> to BL etc..
You must have a. hex file, for your device.
for me this is a NPRG8650.hex - of course, is needed only when, you want reupload partition etc.
Hallo xda-developers users,
I have an Inspire 4G already rooted and ENG S-OFFed.
I'm trying to connect my device with the QPST tool because I'd like to view/modify NV parameters, but the device isn't recognized by the software.
My computer runs Windows 7 64 bit.
These are the steps I followed:
- install htc sync drivers and software;
- power on the device while holding volume+ key (this is what I think should put the device in diag mode);
- connect the device to USB port on the computer.
After doing that, I get a new device named "qualcomm cdma technologies msm", but Windows can't load its appropriate driver.
I found on another thread that I should install "windows mobile device center" and so I did, but nothing changed.
I've already searched various forums and installed several drivers, but couldn't come to a solution; can anyone point me to a tutorial explaining how to work with QPST with the Inspire 4G?
Thanks in advance for your help.
Cheers.
I can't get my phone to appear in (Win8.1) Device Manager as a Moto QC Diag/COM port. I'm using the (Moto) v5.9.0 drivers. I've tried installing the drivers, not installing the drivers, and updating the drivers manually. I never see a Moto QC Diag port option. If I install the drivers automatically, I see Mot Composite ADB Interface, Motorola USB Networking driver, DROID RAZR HD (under Portable Devices). I'm booted into BP Tools, USB debugging is on, my SIM is out. What am I missing please? Thank you in advance.
Motorola Droid Razr HD (XT926) Verizon running 4.1.1 ROM
Win8.1 64-bit, Admin acct.
retalger said:
I can't get my phone to appear in (Win8.1) Device Manager as a Moto QC Diag/COM port. I'm using the (Moto) v5.9.0 drivers. I've tried installing the drivers, not installing the drivers, and updating the drivers manually. I never see a Moto QC Diag port option. If I install the drivers automatically, I see Mot Composite ADB Interface, Motorola USB Networking driver, DROID RAZR HD (under Portable Devices). I'm booted into BP Tools, USB debugging is on, my SIM is out. What am I missing please? Thank you in advance.
Motorola Droid Razr HD (XT926) Verizon running 4.1.1 ROM
Win8.1 64-bit, Admin acct.
Click to expand...
Click to collapse
I think you can use the drivers from here: http://forum.xda-developers.com/showthread.php?t=1891582
coolloser said:
I think you can use the drivers from here: http://forum.xda-developers.com/showthread.php?t=1891582
Click to expand...
Click to collapse
Thanks. Ya, I tried the Motorola Device Manager 2.4.5 file. Swapping out to another driver package hasn't resolved the problem. I've also tried on a Win7 Pro machine directly hard wired to my modem. Same problem with it.
[SOLVED]
first, THANK YOU dragonhart6505 for your youtube vid how to install motorola qc diag driver for unlocking motorola droid razr m/hd (xt907/xt926). your words "hit vol up so phone boots properly" was what i was missing.
let me explain as i know i'm not the only poster with this problem, i just haven't seen a solution posted. till now. it has taken me weeks to find the answer.
i thought i was booting into bp tools mode. i did the three finger salute. i scrolled to bp tools. let phone boot and plugged it into usb port. no qc port (not even one that needed a driver). couldnt create a virtual serial/com port either using hw vsp. got a lan error. cdma workshop stated no answer from my phone. i could ping the ip though with no errors. all because i wasnt in bp tools mode as i thought! UGHHHHH!!!! after scrolling to bp tools, hit vol up (no dont scroll to factory reset). youll see when you do it. now i can manually install the qc driver.
the other thing i learned along the way was that with windows 7/8 (yes, and 8.1) the qc diag driver must be manually installed.
retalger said:
the other thing i learned along the way was that with windows 7/8 (yes, and 8.1) the qc diag driver must be manually installed.
Click to expand...
Click to collapse
The 2.4.5 driver has motport.inf dated 2013-03-19. So anything newer than this will require manual installation. If one knows the PID for the device (in Device Manager / device / Details), one can edit motport.inf to simplify installation.
This is the officail Motorola QC Diag port driver .
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Hello, does anybody have the drivers or know how to connect the samsung illusion to cdma tool? i have tried many things and different drivers; it just does not want to connect. help?
Hello,
I am trying to flash a Kyocera hydron icon (c6730) with android 4.4.2, from Sprint, to another carrier outside of the US. I am using DFS tool v 15.12.301. The problem I am having is that DFS will not connect to the phone. Drivers are installed, pc recognizes the phone, even DFS will show the name of the phone and the COM where the phone is connected to but when I click the connect buttom in DFS it will not connect. What could be wrong or is there another way to load the PRL file to the phone? I really appreciate any help.
Thanks is advance.