As the title says, anybody have any luck using QPST with Windows Phones? I managed to get my Trophy into bootloader mode and recognized as "HTC USB Sync" but unfortunately wasn't able to configure it for connection via USB serial.
This QPST working for all Devce Qualcomm.
but not for all....
have you try to dial ##MFG# ? then enable diag mode..lucky you, Verizon MSL is 000000 .. I'm on Sprint, which is not using standard MSL
Yes, you must run phone in Diagnostic Mode etc.
I could get my focus into usb serial mode, but unfortunately Samsung Driver pack didn't even have the driver for it. Also the phone recognized as "PROTOTYPE something ... " in device manager.
minori_aoi said:
I could get my focus into usb serial mode, but unfortunately Samsung Driver pack didn't even have the driver for it. Also the phone recognized as "PROTOTYPE something ... " in device manager.
Click to expand...
Click to collapse
You not must install new driver etc.
All Phone Quallcom, have a Factory Test Mode, then in this moede you connect yours device in QPST. This not a bootloader mode, this program reconnect device from FTM -> to BL etc..
You must have a. hex file, for your device.
for me this is a NPRG8650.hex - of course, is needed only when, you want reupload partition etc.
USB Drivers are let your PC communicate with your device.
If you are executing some ADB Commands, you will need USB Drivers installed which will let the ADB server on your PC communicate with the ADB client on your device. If there are no USB Drivers installed on your PC, you will not be able to perform activities on your device via the PC.
First of All I would recommend you to install Universal ADB Driver Installer.The Universal ADB Driver installer detects your phone and installs the ADB drivers for it.This tool developed by drsmart is your solution to the “device not found” error you might get on executing ADB commands.
Universal ADB Driver Installer Download Link - http://adbdriver.com/downloads/
USB DRIVERS
1.SAMSUNG:
--- http://www.samsung.com/us/support/downloads
2.LG
---http://www.lg.com/us/support/mobile-support
3.HTC
---https://support.htc.com/en
4.SONY
---http://developer.sonymobile.com/downloads/drivers/
5.ASUS
---http://support.asus.com/download/options.aspx?SLanguage=en&type=1
6.MOTOROLA
---http://www.motorola.com/sites/motodev/us-en/motodev_lp.html
MORE DEVICES WILL BE UPDATED
Thanks for the info. I tried the univ adb driver installer but it showed I already had the right driver installed. Windows explorer can see my phone but other apps like HTC Sync or myphoneexplorer can't. This only happened after I rooted & installed a new rom. Maybe the rom is faulty...
I want Google nexus driver
any one can help me ?
mt6572 driver
Please add driver for mt6572 device
thx. very usefull!
thanks for the updated links.
Gole Maryam said:
I want Google nexus driver
any one can help me ?
Click to expand...
Click to collapse
an universal driver for all Nexus Devices (Phones and Tablets) can be found here:
http://forum.xda-developers.com/showthread.php?t=2513339
No access to USB debug
I give up and need some professional help...Ya both kinds.
Here we go, I have the Galaxy 3 d2att I747
Rooted
I was running CM 10.2 with latest nightly, I think 20131208 and decided to update to CM11 via my Cyanogenmod updater but before I did I had read somewhere I should change from CWM recovery to TWRP so I downloaded Goomanager and updated to the TWRP version for my phone then went for the KitKat update and thats when the trouble began.
I am now stuck in a boot loop even if I try to boot into TWRP all I get is the TWRP boot logo then straight into boot loop again. I am almost positive I did a factory wipe as well as cache/dalvik.
Not being able to use TWRP to get into recovery I thought I would just use Odin but I can't get any of my laptops to recognize the phones USB, I just get the windows usb driver error and have tried to install the drivers manually via device manager using my samsung 7 chronos with windows 8.1 and my acer with windows 7. I updated drivers using Samsung Kies and from the website, no luck.
I also ventured into an area that I have no expertise in but I guess thats how we learn so I downloaded the Android SDK thinking I could use it to download and install the google USB drivers that way, but I can't get out of boot loop to make sure USB debugging is checked. The only thing I can access is the stock download mode which would be great if I could use the USB connection.
What am I missing? Any suggestions?
USB Not Recognized Error
I noticed that my phone suddenly stopped being recognized on both my Windows 7 and Win8 laptops. I have been trying to fix it with the drivers but to no avail. However, I plugged my phone in with a different USB cord and voila it was recognized and working. Maybe this could possibly be a simple fix.
My computer stopped recognizing my Skyrocket
Hi Everyone,
I also am having trouble with my win 7 computer recognizing my Skyrocket suddenly. I have been using several KitKat roms and they have been working just fine, except for some reported bugs that the CM devs are working on. I even was able to connect to the computer and explore both my internal and external drives. Then suddenly that stopped and the computer gave me a need to get drivers warning. I've tried to download drivers from Samsung and the computer says they are already installed. I also tried the universal driver download and got the same message. Any help would be appreciated. Like the others on this forum, I wouldn't be able to odin if I got in trouble.
Thanks for your concideration,
drewfs7270
I switched to a different rom and now it's working again !
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Thanks.. :good: usefull
Also, any mobile manufacturer website has guides or direct downloads for drivers. Otherwise uni drivers suffice.....
Sent from my Nexus 5 using xda app-developers app
mtk preloader driver unable to install/unplugged appears
mt65xx unplugged when I try installing my device, I tried uninstalling all preloader vcom drivers in my laptop then restart and when I try to connect my device mtk mt65xx preloader just pops up in device manager then suddenly disappears and unknown device shows instead. I also tried manually update driver for unknown device then select the folder where my mtk driver is saved still unsuccessful? I've also searched and tried many other ways out there still no luck. Can anybody give me a solution? By the way i'm using windows 7 x64.
Delted
Edit: Deleted
soft brick
I face bad experienced, the tablet can not boot ( after install TWRP ) but enable to enter the fastboot mode and can be detected by the computer as android adb interface but adb can't communicated with the tablet. (list of devices atached)
I do have a backup file ( I make it before soft brick, I make backup using dd command, because I don't have cwm/twrp recovery ).... but how to flash it ? Tablet chipset is wonder media 8980 OS android 4.2.2
I can not flash it by adb/fastboot.
Maybe someone here can give me a little guide for how to....
I really appreciate for your kindness
Hey, I made an expirience, which might help other users as well.
I have a Sony device (Z1C) and use Windows 10, maybe this will help for other brands and for other Windows 10 users.
I installed drivers for my device and was able to use adb. When I put the phone into fastboot mode, it was not recognized anymore. I found out, Sony has a seperate (updated, maybe?) driver for fastboot mode. When I tried to install this, the driver was not signed and Windows refused to install it. However, you can enter the UEFI (successor of BIOS) and enable installation of unsigned drivers (at own risk). Then I was able to install the fastboot driver and controll my phone in fastboot mode as well as in adb mode.
In conclusion: You might think you installed drivers, because you did, but maybe you did not.
Even on LineageOS page, many people fail to mention that, you DON'T and SHOULDN'T install any generic or universal ADB driver if you have Samsung device. As you can just install Samsung USB Drivers officially from Samsung site. Samsung USB Drivers already contain ABD interface driver just fine so Universal ADB driver is redundant for Samsung phones.
Hi guys,
I have a problem with Samsung Mobile device driver on Windows 7 64 for I317M phone . To use QPST program or Samsung Tools software with Z3X box I need to put phone into Modem Mode.In PDA mode it works as supposed to ( I see it in windows explorer and another applications ,I see opened port for it in device manager) .But when I switch into Modem mode, I have “drivers not installed correctly for the device”. In device manager I see in ”Other devices” 2 Qualcomm CDMA Technologies MSM devices with yellow exclamation signs on them and no ports installed. I am using Windows 7 64bit OS. I tried to to connect it on two computers and got the same result.What settings have to be changed on the phone or in computer to get it working in Modem mode and get access to the phone ? What drivers have to be instaed for Qualcomm CDMA Technologies MSM ? My phone is unlocked I317M, not rooted.
Thanks
This is the i727 forum. You should ask in the i317 forum. And post it in q&a.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Hello everybody,
I send my new phone to repair, so i take my old LG Optimus 3D (P920) from drawer
When i power on the phone, i see a message about no space in internal memory.
I search this web, because i have some experiences with modding android from Wildfire S, and I found some news about using ICS on P920 device.
First tutorial which i tried is some tutorial for noobs in Android Development Section.
Drivers successfully installed and LG Flash Tool start flashing, but it stuck on EBL writing start.
I tried many times on different PCs, but same result
After that i wanna try rebrick with Omap4boot tool, but P920 cannot connect as OMAP4430 devices.
No devices appearing in devmgmt, while connect my phone to USB port with volume up pressed.
Only windows show: USB device not recognized message in tray zone.
This message shows periodically while phone is connected.
Now i cant connect phone to the PC in download mode.
Only thing it works is recovery, but i cant mount USB storage.
Is my phone totally dead now?
Thank you.
jakub.josef said:
Hello everybody,
I send my new phone to repair, so i take my old LG Optimus 3D (P920) from drawer
When i power on the phone, i see a message about no space in internal memory.
I search this web, because i have some experiences with modding android from Wildfire S, and I found some news about using ICS on P920 device.
First tutorial which i tried is some tutorial for noobs in Android Development Section.
Drivers successfully installed and LG Flash Tool start flashing, but it stuck on EBL writing start.
I tried many times on different PCs, but same result
After that i wanna try rebrick with Omap4boot tool, but P920 cannot connect as OMAP4430 devices.
No devices appearing in devmgmt, while connect my phone to USB port with volume up pressed.
Only windows show: USB device not recognized message in tray zone.
This message shows periodically while phone is connected.
Now i cant connect phone to the PC in download mode.
Only thing it works is recovery, but i cant mount USB storage.
Is my phone totally dead now?
Thank you.
Click to expand...
Click to collapse
Did you try different pcs (windows 7, windows xp, windows 8), different usb cables? Can your phone boot into fastboot mode? Did you try to install omap drivers in device manager after unplugging the device?
Check out this thread too http://forum.xda-developers.com/showthread.php?t=2246001
i have a problem. i have a htc evo 3d cdma rooted unlocked and my computer is windows 7 with the htc driver.... i want to be s off i finally got controlbear to work untill i get to the arrow screen then it says resetting connecting 1 2 open device manager and check adb and fastboot drivers. so i opened device manager and looked and windows sees it as a portable device and i tried to install the htc driver but i dont know where it is on the computer and it doesnt show up when i pick from a list of drivers. please help i cant find a solution