windows reads htc evo 3d as protable device on controlbear arrow screen - General Questions and Answers

i have a problem. i have a htc evo 3d cdma rooted unlocked and my computer is windows 7 with the htc driver.... i want to be s off i finally got controlbear to work untill i get to the arrow screen then it says resetting connecting 1 2 open device manager and check adb and fastboot drivers. so i opened device manager and looked and windows sees it as a portable device and i tried to install the htc driver but i dont know where it is on the computer and it doesnt show up when i pick from a list of drivers. please help i cant find a solution

Related

Rooting my HTC Desire

I have tryed rooting my Desire with Unrevoked.
Unrevoked just sits at waiting for device, I have installed the drivers and HTC Sync is uninstalled, the problem I get is when the phone is plugged in and switched on normal not in the bootloader I get an error in device manager with something called ADB, I am using windows 7 32Bit, any help would be great.

[Q] Unable to connect to PC to try and root/unlock bootloader

right... dunno what's going on...
just got a new Chacha on the cheap....
running windows 7 64bit
tried the htc sync it says on the site... latest version... won't install htc driver install 4.0.001....doesn't recognise it
tried the sync manager (horrible bit of software) it recognised it for a bit but now doesn't
found a thread which is just the drivers... the htc driver 4.0.001 and it does the same...
don't have nay other pc's running windows and I'd really like to get the best out of this phone...
any help?

[Q] Fastboot AC windows Vista drivers?

I've got a rooted but not s=off HTC One XL which I'm trying to do s=off and get back on the latest version of CM. The problem I have is that I can't get fastboot to work anymore. From a command prompt I can do adb devices and get a response back that shows my phone. I issue the adb reboot bootloader and my phone reboots into the bootloader. The problem is it says fastboot ac and fastboot devices shows nothing. There are several odd things which partially leads me to suspect that my phone has something wrong with it. The only device that will show my phone through adb is my wife's ancient laptop, and I get a message about the USB port slowing things down. My work laptop, personal laptop, and PC all refuse to see the phone despite downloading HTC Sync, installing it for the drivers and removing Sync. Only the old laptop gets as far as the adb devices to work.
When I boot into bootloader, Windows Vista gives a message about unknown device and the device manager updates from showing the phone under Android and MyHTC to going under Universal Serial Bus controllers and showing as an unknown device. I try to update the drivers and point at HTC driver and windows lies to me and says that the best driver is already installed.
I'm at a total loss and can't find anything else to try. I have also used two different cables with the same results, one is a generic USB cable and the other is an HTC cable. I can mount the phone as a USB drive and copy/paste files. It is only in the bootloader that the phone becomes unknown.
Try using a linux bootable usb stick or a windows vm. It's more likely that something is interfering with the driver.
Sent from my HTC One X using xda app-developers app

[Q] [Help] fix soft brick sensation s-off

So I was given another HTC sensation recently but this time it's bricked and I don't know how to fix it.
I have a working HTC sensation phone to test that the driver work on win 8.1
The problem
When turning on the phone it goes to a black screen with HTC logo in the middle and 4 small triangles with exclamation point in each corner, from here I have to take out the battery to turn off the phone.
Holding Power+volume down brings up this screen as well so I can't get into bootloader/hboot using pwr+volume down, same thing with plugging in phone to usb
What I've been told
phone is s-off (I assume this means it has a some sort of custom recovery)
bricked when pulling out cable during RUU while trying to return to stock
What I've done/know
windows 8.1
plugged to USB 2.0 port
USB device not recognised when plugging in phone, in device manager in Android HTC device properties
This device cannot start. (Code 10)
A request for the USB BOS descriptor failed.
Click to expand...
Click to collapse
disabled driver signing security
install Android Universal Naked Driver in Win8 test mode
install Minimal ADB and fastboot utility
adb devices doesn't list any device
other adb command give "error: device not found"
fastboot command produces "waiting for device"
same with fastboot getvar cid
Thank you for any assistance you can give
stillsober said:
So I was given another HTC sensation recently but this time it's bricked and I don't know how to fix it.
I have a working HTC sensation phone to test that the driver work on win 8.1
The problem
When turning on the phone it goes to a black screen with HTC logo in the middle and 4 small triangles with exclamation point in each corner, from here I have to take out the battery to turn off the phone.
Holding Power+volume down brings up this screen as well so I can't get into bootloader/hboot using pwr+volume down, same thing with plugging in phone to usb
What I've been told
phone is s-off (I assume this means it has a some sort of custom recovery)
bricked when pulling out cable during RUU while trying to return to stock
What I've done/know
windows 8.1
plugged to USB 2.0 port
USB device not recognised when plugging in phone, in device manager in Android HTC device properties
disabled driver signing security
install Android Universal Naked Driver in Win8 test mode
install Minimal ADB and fastboot utility
adb devices doesn't list any device
other adb command give "error: device not found"
fastboot command produces "waiting for device"
same with fastboot getvar cid
Thank you for any assistance you can give
Click to expand...
Click to collapse
you have to make the device being recognized from win 8.1
there a lot of guides here in xda on how to set up adb/fastboot on windows 8
then use again the ruu
I have 2 HTC sensations, one working one bricked.
the working one is recognised on the pc, fastboot etc working
the bricked one isn't
USB device not recognised when plugging in phone, in device manager in Android HTC device properties
Quote:
This device cannot start. (Code 10)
A request for the USB BOS descriptor failed.
Click to expand...
Click to collapse

Device not Recognized.

I am trying to unlock bootloader on a new htc one x(at&t) that i recently got. I have windows 10. When i connect my device to the computer it recognizes it easily. However, when i boot into fastmode, it doesnt recognize the device at all. i tried updating driver but nothing changed. What should i do???? please help me!
lPlease ignore. wrong forum
you probably need a PC running WinXP / Win7 to do it
the phone cant be recognized in Win8 or later even the HTC driver installed properly

Categories

Resources