Dear All
the old days of enabling diag port is gone now. nowdays oppo, realme, vivo and Mi using new patches to strick diag mode enable.
i want to know the new possiblities to enable diag port. as till last update oppo A3s ad Realme use *928# for diag mode enable which is stick with wifi test mode (FTMActivity) butnow that is also patched.
any new information about these handsets. its most important to repair BB and restore Qcn etc.:fingers-crossed:
Note: do not advice full flash etc. as it is not possible in oppo and realme now, they need Tool with authorised User ID and Password.
anyone knows the diag port code ?
Oppo engineering mode, Oppo Diag Port is enabled via *#649010# (Password - 6776)
Related
As the title says, anybody have any luck using QPST with Windows Phones? I managed to get my Trophy into bootloader mode and recognized as "HTC USB Sync" but unfortunately wasn't able to configure it for connection via USB serial.
This QPST working for all Devce Qualcomm.
but not for all....
have you try to dial ##MFG# ? then enable diag mode..lucky you, Verizon MSL is 000000 .. I'm on Sprint, which is not using standard MSL
Yes, you must run phone in Diagnostic Mode etc.
I could get my focus into usb serial mode, but unfortunately Samsung Driver pack didn't even have the driver for it. Also the phone recognized as "PROTOTYPE something ... " in device manager.
minori_aoi said:
I could get my focus into usb serial mode, but unfortunately Samsung Driver pack didn't even have the driver for it. Also the phone recognized as "PROTOTYPE something ... " in device manager.
Click to expand...
Click to collapse
You not must install new driver etc.
All Phone Quallcom, have a Factory Test Mode, then in this moede you connect yours device in QPST. This not a bootloader mode, this program reconnect device from FTM -> to BL etc..
You must have a. hex file, for your device.
for me this is a NPRG8650.hex - of course, is needed only when, you want reupload partition etc.
Dear Forum members
I am new to the world of andriod , i have recently got Xiaomi Mi4i , which i understand is a qualcomm chipset device.
I would like to use the QPST tool to see the settings on the phone. I am using win64 8.1, The issue i have is that when i enable the usb debugging mode, i see in device manager a non-recognised USB, they are no drivers for the device.
Is there any qualcomm drivers for the device which i can connect.
request seniors to comment
akt73 said:
Dear Forum members
I am new to the world of andriod , i have recently got Xiaomi Mi4i , which i understand is a qualcomm chipset device.
I would like to use the QPST tool to see the settings on the phone. I am using win64 8.1, The issue i have is that when i enable the usb debugging mode, i see in device manager a non-recognised USB, they are no drivers for the device.
Is there any qualcomm drivers for the device which i can connect.
request seniors to comment
Click to expand...
Click to collapse
This is what i see in device manager
Use pdanet
Yap ur drivers prolly messing as mentioned above Pda net will be helpful or the drivers from the pc suite of mi phones
dear
i have installed latest updates of marshemelow 6.0.1 , but i want to enable gsm and 4g bands so i need to qpst compatble but diag mode does not work
anybody have an idea?
thanks
ive never seen diagnostic mode work for MM
Hey guys, i´m trying to access my phone via EDL mode.
I am able to enable the EDL Mode by shorting the board pins, the COM Port is correct (Qualcomm HS-USB QDLoader 9800), but the phone wont turn on when in EDL mode, i dont know if this is correct or not. It boots ok in normal mode.
I cant find a programmer either, i could find "prog_emmc_firehose_Sdm660" but i think the Note 6 Pro is "Sdm 636", not sure.
Any help?
Thanks
I'm in trouble trying to restoring original imei, My imei is 0000 now and i can't manage to fix.
I have tried a bunch of things, Got stuck trying to connect the phone in diag mode, so i can use qfil to rewrite.
Any help or easier method?
Thanks
Is your phone a US phone? or GSM? sm-S908 | U | F | B?
Where and from whom did you buy your phone? My thoughts are that someone pulled a fast one and that you might have been scammed..
Sm-s908e
lost imei after flashing rom
Did not made Qcn backup
Alright, check this post out...
also check out this video of a dude rebooting into EDL mode, which I believe is the mode of function that you're looking for.
This is the Youtube video.
Dial:
*#9900#
Choose Upload mode. I think it's different if your model is american. I'm about to try it out..
You will need the qualcomm 9008 drivers.
Yeah i saw that, but is not the same
"Diag Port [Qualcomm HS-USB Android Diag 901D ] and Qualcomm HS-USB QDLoader 9008 – both are separate things. Android Diag 901D is a diag port while the HS-USB QDLoader 9008 is an emergency download mode [known as EDL mode]."
How to Enable Or Disable Diag Mode on Qualcomm device using ADB [Works on Vivo, Xiaomi, Oppo and more]
Here is the guide on How to Enable Or Disable Diag Mode on Qualcomm device using ADB [Works on Vivo, Xiaomi, Oppo and more]. Read full detail
www.getdroidtips.com
But i think i gotta get a cable to try in Edl as i tryed all i have found
i'm trying to flash other rom's to search for any change
Appreciate your help.