I'm in trouble trying to restoring original imei, My imei is 0000 now and i can't manage to fix.
I have tried a bunch of things, Got stuck trying to connect the phone in diag mode, so i can use qfil to rewrite.
Any help or easier method?
Thanks
Is your phone a US phone? or GSM? sm-S908 | U | F | B?
Where and from whom did you buy your phone? My thoughts are that someone pulled a fast one and that you might have been scammed..
Sm-s908e
lost imei after flashing rom
Did not made Qcn backup
Alright, check this post out...
also check out this video of a dude rebooting into EDL mode, which I believe is the mode of function that you're looking for.
This is the Youtube video.
Dial:
*#9900#
Choose Upload mode. I think it's different if your model is american. I'm about to try it out..
You will need the qualcomm 9008 drivers.
Yeah i saw that, but is not the same
"Diag Port [Qualcomm HS-USB Android Diag 901D ] and Qualcomm HS-USB QDLoader 9008 – both are separate things. Android Diag 901D is a diag port while the HS-USB QDLoader 9008 is an emergency download mode [known as EDL mode]."
How to Enable Or Disable Diag Mode on Qualcomm device using ADB [Works on Vivo, Xiaomi, Oppo and more]
Here is the guide on How to Enable Or Disable Diag Mode on Qualcomm device using ADB [Works on Vivo, Xiaomi, Oppo and more]. Read full detail
www.getdroidtips.com
But i think i gotta get a cable to try in Edl as i tryed all i have found
i'm trying to flash other rom's to search for any change
Appreciate your help.
Related
Hi all, I'm new here and i have a malfunctioned phone so thought I'd give this a shot and learn some stuff from you guys..
I have a bricked galaxy s3 which cant get into download mode. Computer detects it as Qualcomm HS-USB QDloader 9008 in device manager and QPST software sees it in download mode via the same COM port.
Now I want to know... is there any luck is this phone completely dead? and what if i send it back for repair (i took it for JTAG and i was told the chip that boots the phone is burnt out when flashing a corrupted rom)
If you have any info or experience regarding this your help is much needed and appreciated.
4tunecookie said:
Hi all, I'm new here and i have a malfunctioned phone so thought I'd give this a shot and learn some stuff from you guys..
I have a bricked galaxy s3 which cant get into download mode. Computer detects it as Qualcomm HS-USB QDloader 9008 in device manager and QPST software sees it in download mode via the same COM port.
Now I want to know... is there any luck is this phone completely dead? and what if i send it back for repair (i took it for JTAG and i was told the chip that boots the phone is burnt out when flashing a corrupted rom)
If you have any info or experience regarding this your help is much needed and appreciated.
Click to expand...
Click to collapse
It is hard bricked my friend a lot of us have suffered this also, JTAG or maybe warranty is your only option.
Hi, I have bricked my phone. Now it is recognized by computer as Qualcomm HS-USB QDLoader. I have read that it possible to make blankflash to gain ability to boot into fastboot, but it necessary to have some specific files... Is it possible now to return it back to life?
maybe service provider can help?
I'm wondering if anyone has a Nexus 5 D821 motherboard in working condition that they would like to get rid of. Or if anyone knows of a way to get into Qualcomm 9008 mode from LGE Android Platform USB Serial Port. The phone seems dead, doesnt react to button presses, Vol Up+Vol Down+ Power doesnt change anything, the phone restarts back into LGE Android Platform USB Serial Port mode. No download mode. From what I know my EMMC wasn't dead (passed all the Board Diag Tests). Phone died after I flashed SBL1 with boarddiag (Even though I was told not to...)
There is a guide in general forums.
wangdaning said:
There is a guide in general forums.
Click to expand...
Click to collapse
Any links? From what i know i have tried all of them (LG flash tool, Board diag) I just cant get the phone to show up as anything other than the LGE Android Platform USB Serial Port
Excudent said:
Any links? From what i know i have tried all of them (LG flash tool, Board diag) I just cant get the phone to show up as anything other than the LGE Android Platform USB Serial Port
Click to expand...
Click to collapse
I hard bricked my phone yesterday and was stressing out quite a bit! Luckily I found this guide: http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Note: I assume that you know what you are doing. Since you know about Qualcomm HS-USB QDLoader 9008 mode, you probably do, but you can do some serious harm with this mode.
Essentially, the gist of the guide comes down to installing the qualcomm drivers so that the phone becomes detected as a Qualcomm HS-USB QDLoader 9008. After this, you can use Boarddiag as you are used to to reflash the partitions. Note that for me, the phone was not in sahara dload mode and Boarddiag would not work. What I had to do was the following (these steps are done after the drivers are properly installed)
Unplug the Nexus 5 from your computer
Open the back cover and remove the 6 top screws holding the other protective cover
Disconnect the battery cable for 5 seconds. Reconnect it after
While holding the volume up and down button, plug it into your computer. It should now be in Sahara download mode and Boarddiag should work.
Let me know how everything goes!
hello Everyone,
I by mistake flashed a wrong .kdz file in my LG LS996 Qualcomm Snapdragon 810 MSM8994, and now there is no sign when i switch on or when i plug it.
there is no recovery mode
there is no fastboot mode
the only thing is that, it shows as qualcomm hs-usb qdloader 9008 when i plug. i have ready many things on internet and yet nothing works, the smart diagtool does not have the MSM8994, please i really need your assistance on how i can fix this issue.
Thanks a lot!
Hi Everyone,
I tried to flash a custom rom on my ysl but it wasn't its rom (didn't know) so it's brick
nothing work in the phone but when i connect it into my pc it appear in device manger in port section under name (i can't remember it) but after updating it with qualcom drivers it changed to Qualcomm HS-USB Diangnostics 900E
i tried to flash offical fastboot rom with mi flash but give me missmatching device and image and failed too in Qualcomm image flash tool then i update phone driver manually to Qualcomm HS-USB QDLoader 9008 and tried again in mi flash but it give me error massage immediately and in QIFT give me sahara error.
i searched a lot about it i found something like EDL MODE and EDL CABLE but i don't know anything about those stuff and found something about change emmc image and don't know something about it else, so is there anything i can do to unbrick my phone or it dead without another chance ?
Ahmed-PP said:
Hi Everyone,
I tried to flash a custom rom on my ysl but it wasn't its rom (didn't know) so it's brick
nothing work in the phone but when i connect it into my pc it appear in device manger in port section under name (i can't remember it) but after updating it with qualcom drivers it changed to Qualcomm HS-USB Diangnostics 900E
i tried to flash offical fastboot rom with mi flash but give me missmatching device and image and failed too in Qualcomm image flash tool then i update phone driver manually to Qualcomm HS-USB QDLoader 9008 and tried again in mi flash but it give me error massage immediately and in QIFT give me sahara error.
i searched a lot about it i found something like EDL MODE and EDL CABLE but i don't know anything about those stuff and found something about change emmc image and don't know something about it else, so is there anything i can do to unbrick my phone or it dead without another chance ?
Click to expand...
Click to collapse
If you got detected the device under Qualcomm HS-USB 9008, then your device entered to EDL mode. Check well, what the error was, pay attention to the connection, that device get attached permanently during the flashing session.