I'm wondering if anyone has a Nexus 5 D821 motherboard in working condition that they would like to get rid of. Or if anyone knows of a way to get into Qualcomm 9008 mode from LGE Android Platform USB Serial Port. The phone seems dead, doesnt react to button presses, Vol Up+Vol Down+ Power doesnt change anything, the phone restarts back into LGE Android Platform USB Serial Port mode. No download mode. From what I know my EMMC wasn't dead (passed all the Board Diag Tests). Phone died after I flashed SBL1 with boarddiag (Even though I was told not to...)
There is a guide in general forums.
wangdaning said:
There is a guide in general forums.
Click to expand...
Click to collapse
Any links? From what i know i have tried all of them (LG flash tool, Board diag) I just cant get the phone to show up as anything other than the LGE Android Platform USB Serial Port
Excudent said:
Any links? From what i know i have tried all of them (LG flash tool, Board diag) I just cant get the phone to show up as anything other than the LGE Android Platform USB Serial Port
Click to expand...
Click to collapse
I hard bricked my phone yesterday and was stressing out quite a bit! Luckily I found this guide: http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Note: I assume that you know what you are doing. Since you know about Qualcomm HS-USB QDLoader 9008 mode, you probably do, but you can do some serious harm with this mode.
Essentially, the gist of the guide comes down to installing the qualcomm drivers so that the phone becomes detected as a Qualcomm HS-USB QDLoader 9008. After this, you can use Boarddiag as you are used to to reflash the partitions. Note that for me, the phone was not in sahara dload mode and Boarddiag would not work. What I had to do was the following (these steps are done after the drivers are properly installed)
Unplug the Nexus 5 from your computer
Open the back cover and remove the 6 top screws holding the other protective cover
Disconnect the battery cable for 5 seconds. Reconnect it after
While holding the volume up and down button, plug it into your computer. It should now be in Sahara download mode and Boarddiag should work.
Let me know how everything goes!
Related
Hello guys,
My Nexus 5 (D820 32gb) wont turn on, after flash a false (I believe) file in TWRP, when i press more than 10 sec or less nothing appear on the screen (he was off) he was recognize by my PC sush as QHSUSB Bulk (I have a driver for Find 7 but I believe that is not 100% compatible, when I install the driver "QHSUSB Bulk" is converted into "Qualcomm HS-USB QDLoader 9008 (COM16)") when I press on power+up+down, when I press on nothing my pc recognize my phone sush as "LGE AndroidNet USB Serial Port (COM15)".
On LGNPST a UNKNOWN model was recognize when my phone is on "LGE AndroidNet USB Serial Port" but I don't have any dll and bin file for "emergency" the phone (D820 32gb), I think LGNPST is the only software to recover my phone.
Please help me.
Thanks
TheQuentincc said:
"Qualcomm HS-USB QDLoader 9008 (COM16)"
Click to expand...
Click to collapse
Once this state is achieved on a Nexus 5, there is nothing we can do about it yet, only LG or other professionals can repair it. Even so, in most cases LG does not bother to repair it and simply does a motherboard swap.
Sorry, but you'll have to send it in for repair/replacement.
Lethargy said:
Once this state is achieved on a Nexus 5, there is nothing we can do about it yet, only LG or other professionals can repair it. Even so, in most cases LG does not bother to repair it and simply does a motherboard swap.
Sorry, but you'll have to send it in for repair/replacement.
Click to expand...
Click to collapse
F***, it is no longer recognized by the pc (fail when flash with LGNPST), so for next guys who read the topic I think this program can restore a hard brick from nexus 5 : http://forum.xda-developers.com/attachment.php?attachmentid=3007071&d=1415553921
TheQuentincc said:
F***, it is no longer recognized by the pc (fail when flash with LGNPST), so for next guys who read the topic I think this program can restore a hard brick from nexus 5 : http://forum.xda-developers.com/attachment.php?attachmentid=3007071&d=1415553921
Click to expand...
Click to collapse
Nobody here has ever successfully unbricked a Nexus 5 after it has been to 9008. Attempts have only resulted in being completely dead or a unrecognized device.
I tried to replace the battery on my Nexus 5.
powered it down and opened it up. actual swap was done without incident​Now the phone does not recognize neithe of my batteries (old and replacement). I can boot it into bootloader just fine by plugging it in a charger, but the screen will show a battery with a ? in it when trying to boot the phone.
When I plug the phone in my PC, it will only get recognized as Forge HS-USB QDLoader 9008 (COM3) under PORTS in Device Manager. I've tried the diag tool here: and all tests look fine.
Rooted, bootloader unlocked, ElementalX kernel, 5.1.1
Thanks for any help!
Hi,
My oneplus 8 is notshowing the Qualcomm HS-USB QDLoader 9008 in device manager,therefore i can't usethe unbrick tool,any help or advice please
Install the latest Qualcomm drivers
GraveDigger176 said:
Install the latest Qualcomm drivers
Click to expand...
Click to collapse
Where from please
stavros67 said:
Where from please
Click to expand...
Click to collapse
From this thread............https://forum.xda-developers.com/oneplus-8/how-to/op8-unbrick-tool-to-restore-device-to-t4085877
GraveDigger176 said:
From this thread............https://forum.xda-developers.com/oneplus-8/how-to/op8-unbrick-tool-to-restore-device-to-t4085877
Click to expand...
Click to collapse
Hi,
I press volume up & volume down together,insert cable to pc,the phone is not showing up on device manager,and sometimes the phone goes into fastboot mode?
USB debugging enabled on your phone ?
GraveDigger176 said:
USB debugging enabled on your phone ?
Click to expand...
Click to collapse
Yes,it will not show up Qualcomm HS-USB QDLoader 9008 in device manager,seems to make no difference what drivers i download,seem convinced there is something not right with the phone.
That's right what it shows QDLOADER 9800 what phone you tmo or international\india version
Use different pc or laptop
GraveDigger176 said:
That's right what it shows QDLOADER 9800 what phone you tmo or international\india version
Use different pc or laptop
Click to expand...
Click to collapse
I have the oneplus 8,i have tried a different pc,with the same results.Both pc's recognise the phone,and i can transfer files accross,it will just not show QDLOADER 9800 in device manager.
The phone must be completely shutdown before the cable is inserted.
1: power phone down
2: start your msm app and have it ready
3: hold both volume up and down at the same time and do not release
4: plug USB cable (that is already attached to the PC) into the phone
Your phone will not show any indication that it has powered but you should see it in the MSM tool as well as the device manager.
Juxto2010 said:
The phone must be completely shutdown before the cable is inserted.
1: power phone down
2: start your msm app and have it ready
3: hold both volume up and down at the same time and do not release
4: plug USB cable (that is already attached to the PC) into the phone
Your phone will not show any indication that it has powered but you should see it in the MSM tool as well as the device manager.
Click to expand...
Click to collapse
Have tried this countless times on two different pc's,it does not show up on msm or device manager.Also the when pressing and holding said buttons the phone will sometimes go into fastboot mode.
Try the following, power up your phone let it boot, if is finish with booting plug in your phone with the USB cable and look whether USB debugging is showing in status bar at the left bottom of the screen. If it shows USB debugging open CMD command window and type "adb reboot edl" and see what happens. Before you should start your msn tool that you can tap the enrum button maybe this works
Sorry,bottom of which screen
The phone shows in device manager when powered on and connect to the usb cable as " universal Serial Bus devices - IN2013,then when i try and go into edl mode the device manager does not see it's connected.
Hi everyone,
I have a second device as LG_G2 D802 and i gave it to a my friend. He said he rooted it and after a while bricked it.
Phone is not turning on normally, lights green and blue, LG logo appears and after a short while the phone is restarting. I can only enter download mode.
I've tried some options with using XDA topics but i couldn't solve it unfortunately. The last situation is: pc doesn't detect phone in download mode.
With short circuit, sometimes it seems as Qualcomm HS-USB Diagnostics 9006, sometimes Qualcomm HS-USB QDLoader 9008 in device manager.
I used SRK TOOL for 9006, it finished successfully but when i unplugged phone and plug battery and plug usb and enter in download mode, pc didn't detect phone, any devide, etc.
I used Boarddiag for 9008, AP TEST: Successful EMMC TEST: Successful SDRAM TEST: Successful, all process is successful. But again, in download mode, PC doesn't detect anything of the phone.
In the videos I watched, after successful SRK TOOL or Boarddiag processes, pc must detect phone in download mode but the same thing didn't happen to me
I used Win 8.1 64 bit and Win 7 X86, but same thing happened. Stuck in pc detecting problem in download mode. I installed drivers, too.
Is there anything that can be done about it?
Does anyone have an idea?
Thanks.
please read title and help
restore it with msm tool
how to connect the phone screen is black
If the screen is black it may already be in EDL mode. Plug it into a computer and check device manager for something like "Qualcomm HS-USB QDLoader." If that's there, you just need to get the MSM Tool for your model and make sure you have the right drivers.
If you can't get it into EDL mode, you will have to file a warranty claim with OnePlus, no other choice. Mess around with the buttons and see if you can get it to reboot or try the EDL key combo (hold volume up and down and while holding plug in the USB cable that's plugged into the computer). You don't have a chance of repairing it yourself if you can't get into EDL, end of story.
pc recognizing this Qualcomm HS-USB QDLoader in device manager but in msm tool it is showing n/a.and also in device manager it is showing triangle error on device.i am using official driver provided by msm tool poster.
Need some help unbricking (solved)
I bricked my OP9 doing some stuff today. It will not turn on, access bootloader, or anything. When I plug it into my computer, it makes a connecting sound, waits 10 seconds, then disconnect sound, then repeats the process. I tried using MSM...
forum.xda-developers.com
It's can help you
Well you're not the only one I guess. That happened to me as well. So perhaps, Alhamdulillah I can help you out
The screen still remains black that means your phone is in the EDL and you'll need to get it out of it and then get back to EDL again to use msm.
Anyway, hold the power + volume up + down all simultaneously for a while. It'll take you to the Fastboot mode. Don't worry, it definitely will take you to the Fastboot mode.
Then you can do the rest of the flashing as you wish