Related
I have had my Fuze for about 2 weeks. Never dropped it or anything, in fact I baby my phones to the point that the wife makes fun of me for doing so . Anyway, right below the slide-out keyboard, I noticed two small chips about an inch apart from each other. One below the wifi key and one below the internet key. It also looks like the inner lip of that part is also starting to show wear. This is under light to medium use, mind you. I am thinking about exchanging it, however if this is a common problem, I would rather just get a different phone.
Add in the fact it took me a few days to get the phone exactly how I want it. Anyone else having this issue?
I don't think they would admit it if they were.
...just kidding.
As a matter of fact, I found those two chips!
I will have my phone 3 weeks come friday...
You mean you have chips in the exact same spot?
Unless you are withing 30 days, cosmetic damages are not considered valid exchange reasons. Hope you have insurance.
I only had the phone 2 weeks. the guy at the ATT store said to come back tomorrow when a manager was there to do an exchange. Even if I had problems, I paid with American Express. My problem is if it is a design flaw, a replacement would only be a temp. solution.
After reading this thread I looked at mine, which I've had for around two weeks and I also see a small chip right under the 'internet' key.
It's matte black so it does stand out, but I had to look for it.
WTF??
Chip under PTT button
Oh wow, I just noticed a chip right under the internet button. It seems is positioned right under the left side of the PTT when the slider is closed. I baby my phone like nobody's business. Had the Fuze since launch.
Well, if it is a design flaw (which it seems to be) it seems like it is something HTC needs to handle. Exchanging one from ATT will only result in the same thing happening.
yeah i have it too but its soooo small to notice right now and i have had my fuze for about 2 weeks too.
If anybody else is having this issue let us know. This is something that needs to be brought to HTC's attention, especially for a $400 phone.
Mine is also chipping under the OK, CV, spacebar, and Wifi
I am thinking about returning it to AT&T, but hate to have to add everything all over again, especially if the new one will do the same thing. I contacted HTC and suggested I just exchange it...anyone else going to do that as well?
hchavarria said:
Mine is also chipping under the OK, CV, spacebar, and Wifi
Click to expand...
Click to collapse
I got my Fuze from Amazon less than 2 weeks ago, and am noticing the exact same thing on mine, though the one under the WiFi is the only one you can really see, and even it's hardly noticeable (I never even noticed this until I saw this thread, that should give you an idea of how TINY they area). I'll keep an eye on it, but don't plan to exchange it unless this spreads or the chips get worse.
Edit-I baby mine like crazy too, as do most of you on here it seems. That fact, and the fact it's happening in the SAME spots on everybody's Fuze says to me it's a manufacturing defect, and hopefully this is the extent of it. Thankfully so far it's basically unoticeable, though on a phone at this price level there shouldn't be any such defects, no matter how tiny they may be.
I too hope this is the extent of the defect. If it does get worse, I will just contact HTC and explain the situation.
I second this:
under the internet key, calendar key, very tiny spot under wifi.
As i have babied mine, seems like an design issue as well.
Looking from the side profile, you can see that the surface underneath the volume key are touching the side, so it may be the cause that scratches the surface. Can someone starts off a petition?
I already contacted HTC about this issue, however for now the only option would be to exchange it where you bought it. As I mentioned before, if it is (and I would assume it is) a design flaw, it will just happen again with a new one. The only thing I can think of is waiting to see how extensive the damage becomes and if it gets real bad, to return it to HTC.
I gave HTC a link to this thread as well to show them others are having the same issue.
Same problem here on my Fuze, under the Wifi button. I've also had my phone for a little over two weeks and take extremely good care of it. For the WiFi button area of the phone, the only thing I can see is that this is right where the top line of the lower controls (like the line that separates the screen from the home button) hits. And the phone appears to have enough give that when you push down on the home key it constantly hits there. Thats what I am guessing is doing it.
Just a thought...
Hey guys I am super anal when it comes to my phones so I believe I qualify to make an educated guess about this. lol. First of all I noticed the same exact "chips" very soon after I recieved my phone.
At first I too believed them to be wear marks but after further examination I came to the conclusion that they must be production flaws, such as break off points of the plastic mold or something.
I believe this because I simply havent used the phone enough to cause the marks not to mention the mark under the space bar doesnt ever touch the back of the screen. Seeing as everyone has the marks almost exactly in the same place gives more credence to it being a production flaw.
Now moving on to the more frustrating and serious flaw. If you guys look real close I bet you find dust pieces under the glass and against the lcd. I can live with the chips, but I can't stand the dust.
I'm on my 3rd Fuze for warranty reasons, and the 2nd one I got was returned because of this problem. Does anyone have a good camera to post a macro photo for illustration? I would do it but my current handset does not have this issue (and i hope it never does!)
This hardware fix was posted in the Vibrant, General forum. Can it be implemented on the Captivate?
http://forum.xda-developers.com/showthread.php?t=878970
I actually think this was done and posted in the dev section. I'm gonna check real quick and post the link, but our GPS contact is just under the battery cover, no need to disassemble the phone.
http://forum.xda-developers.com/showthread.php?t=876179
It was in the general section.
So it's a hardware and software issue.
Clearly Samsung is never going to fix this, the design is bad. This is crazy to use this type of contact on an antenna. Let alone on a removable back cover. Especially at these frequencies.
I can't believe Google let them get away with it using pretty much the same design for the Nexus S.
This will definitely be my last Samsung. Well, after I have AT&T replace it to fix the turn off problem...
haydonxda said:
So it's a hardware and software issue.
Clearly Samsung is never going to fix this, the design is bad. This is crazy to use this type of contact on an antenna. Let alone on a removable back cover. Especially at these frequencies.
I can't believe Google let them get away with it using pretty much the same design for the Nexus S.
This will definitely be my last Samsung. Well, after I have AT&T replace it to fix the turn off problem...
Click to expand...
Click to collapse
Wrong! My phone works as it is...!!! Samsung fixed it!
I returned my phone since it was having sleep death issues. They issued me a refurbished phone of 10.07 batch since it was within warranty. I had a GPS lock within 10 seconds even on the supplied stock 2.1 JH7.
Check for later batches of phone, or keep exchanging till u get the working one. The initially released batches were flawed.
You don't need to disassemble the Captivate to do this fix, because the antenna contact (or antenna ground contact) is exposed under the battery cover. There's a thread covering this in general.
diablo009 said:
Wrong! My phone works as it is...!!! Samsung fixed it!
Click to expand...
Click to collapse
Ugh. Whatever. This is a design defect similar to the iPhone 4's stupid antenna placement. Samsung at least had the sense not to use this lousy contact mechanism for their cell antenna. If they did they'd have sold about 10 of them before word got out that it drops calls constantly.
This type of contact for this range of RF can not work reliably - period. (I realize I may have a different sense of reliably than you. Reliable is far more than 90% of the time ...)
I bought this tablet off Amazon's Warehouse Deals. It came to me dinged and scratched up, but operable. I noticed the touch screen was a little off and would report false touches occasionally, but I didn't think it was anything to worry about. Like a kid in a candy store, I raced to get a new ROM so I could optimize this thing. In the process I unlocked the bootloader, rooted and installed PACman ROM. Ghost touches disappeared--gone for like 3 whole days. I'm ecstatic, and falling madly in love with this tablet. Then I notice the ghost touches coming back after the 5th day I have had it. Now its showing about 3 ghost touches almost constantly in one vertical line (in landscape) on the right side of the screen. Pretty much totally inoperable. I have scoured all ends of google, and most of the time it spits me out here, searching thread after thread of nothing but "RMA it". My questions are:
Is there any fix to this besides shelling out money for a new digitizer? Is that the general consensus that the digitizer is the root of the problem? I know I'm able to return the product, but does anyone know if Amazon is going to give me grief over an unlocked product that was a scratch-and-dent deal anyway? Any way I can re-lock the device? I've seen multiple threads with replies saying "lol didn't you read the blah blah? no way bro", but these were posted a couple months ago. Maybe something new has come up. I guess I just feel sorta rooked because I bought a defective piece of hardware, and now I can't get a refund just because I modified the software.
Tunameltsalad said:
I bought this tablet off Amazon's Warehouse Deals. It came to me dinged and scratched up, but operable. I noticed the touch screen was a little off and would report false touches occasionally, but I didn't think it was anything to worry about. Like a kid in a candy store, I raced to get a new ROM so I could optimize this thing. In the process I unlocked the bootloader, rooted and installed PACman ROM. Ghost touches disappeared--gone for like 3 whole days. I'm ecstatic, and falling madly in love with this tablet. Then I notice the ghost touches coming back after the 5th day I have had it. Now its showing about 3 ghost touches almost constantly in one vertical line (in landscape) on the right side of the screen. Pretty much totally inoperable. I have scoured all ends of google, and most of the time it spits me out here, searching thread after thread of nothing but "RMA it". My questions are:
Is there any fix to this besides shelling out money for a new digitizer? Is that the general consensus that the digitizer is the root of the problem? I know I'm able to return the product, but does anyone know if Amazon is going to give me grief over an unlocked product that was a scratch-and-dent deal anyway? Any way I can re-lock the device? I've seen multiple threads with replies saying "lol didn't you read the blah blah? no way bro", but these were posted a couple months ago. Maybe something new has come up. I guess I just feel sorta rooked because I bought a defective piece of hardware, and now I can't get a refund just because I modified the software.
Click to expand...
Click to collapse
Same thing happened to my brother's tf300t. He returned it as defective, but I guess you could replace the digitizer. As far as I saw, it was a hardware problem, so it requires a hardware fix. Sorry
cmendonc2 said:
Same thing happened to my brother's tf300t. He returned it as defective
Click to expand...
Click to collapse
Was it through amazon? Do you know if he unlocked it?
Tunameltsalad said:
Was it through amazon? Do you know if he unlocked it?
Click to expand...
Click to collapse
Yes it was through amazon. He had unlocked it and installed TWRP and CROM or CM i dont remember.
Tunameltsalad said:
I bought this tablet off Amazon's Warehouse Deals. It came to me dinged and scratched up, but operable. I noticed the touch screen was a little off and would report false touches occasionally, but I didn't think it was anything to worry about. Like a kid in a candy store, I raced to get a new ROM so I could optimize this thing. In the process I unlocked the bootloader, rooted and installed PACman ROM. Ghost touches disappeared--gone for like 3 whole days. I'm ecstatic, and falling madly in love with this tablet. Then I notice the ghost touches coming back after the 5th day I have had it. Now its showing about 3 ghost touches almost constantly in one vertical line (in landscape) on the right side of the screen. Pretty much totally inoperable. I have scoured all ends of google, and most of the time it spits me out here, searching thread after thread of nothing but "RMA it". My questions are:
Is there any fix to this besides shelling out money for a new digitizer? Is that the general consensus that the digitizer is the root of the problem? I know I'm able to return the product, but does anyone know if Amazon is going to give me grief over an unlocked product that was a scratch-and-dent deal anyway? Any way I can re-lock the device? I've seen multiple threads with replies saying "lol didn't you read the blah blah? no way bro", but these were posted a couple months ago. Maybe something new has come up. I guess I just feel sorta rooked because I bought a defective piece of hardware, and now I can't get a refund just because I modified the software.
Click to expand...
Click to collapse
I got a similar situation in the last two weeks. The problem I have is that my TF300T is keeping rebooting by itself. I've googled it and people say most likely it's a hardware issue. I am trying to find a way to see if the device can be reset to factory condition so that I can return it for repair. Looks like we are on a same boat. Hopefully I can find a way to do so.
Just an update on my issue, in case anyone else stumbles across this particular problem. So far I have gone almost a week with no ghost touches. I popped off the back of the device (three guitar picks did the trick), and disconnected the digitizer ribbon cables and reseated them. Problem vanished. My best guess is that the keyboard dock puts odd pressure on the device. That mixed with rough handling is bound to cause some problems.
The problem I have is that my TF300T is keeping rebooting by itself. I've googled it and people say most likely it's a hardware issue
Click to expand...
Click to collapse
It could be the power button is jammed? I know mine is really touchy (all I do is tap it with my stylus and screen turns on/off. Good luck!
Sent from my TF300T using xda app-developers app
Tunameltsalad said:
Just an update on my issue, in case anyone else stumbles across this particular problem. So far I have gone almost a week with no ghost touches. I popped off the back of the device (three guitar picks did the trick), and disconnected the digitizer ribbon cables and reseated them. Problem vanished. My best guess is that the keyboard dock puts odd pressure on the device. That mixed with rough handling is bound to cause some problems.
Click to expand...
Click to collapse
Thank you. I just got mine from Groupon as refurbed.. (they did a ****ty job, apparently) Ghost issue about 2 days after getting it out of the box. By then already unlocked and flashed CWM.. sigh.
I'll try your fix tonight. Any chance there is an image of the right connector/ribbon?
Hopefully the image quality isnt too bad. I took an exacto knife and gently pried up the black foam squares, set them aside and worked my magic. Hope this helps. Just be careful with the ribbon cable (duh). Hope this helps!
Sent from my TF300T using XDA Premium 4 mobile app
Tunameltsalad said:
Hopefully the image quality isnt too bad. I took an exacto knife and gently pried up the black foam squares, set them aside and worked my magic. Hope this helps. Just be careful with the ribbon cable (duh). Hope this helps!
Sent from my TF300T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you! I'll try this adventure later this week.
Did this today.. So far, 20 mins on it, and no issues. Typically took about 5-7 mins before. So, crossing my fingers this is gone.
THANK YOU! I can go back to enjoying my tablet
Im in the same boat with this Ghost Touches Issues, and its getting worse, sometimes im working at college and this Ghost appears and the tablet gets almost unusable, Only the Keyboard Dock saves me.
Please if you can give me more detailed instructions i think i would be brave enought to do this surgery to my tf300t, merry christmas!
elestudiante said:
Im in the same boat with this Ghost Touches Issues, and its getting worse, sometimes im working at college and this Ghost appears and the tablet gets almost unusable, Only the Keyboard Dock saves me.
Please if you can give me more detailed instructions i think i would be brave enought to do this surgery to my tf300t, merry christmas!
Click to expand...
Click to collapse
i just noticed that when having a ghost touches attack, if i put pressure con the tablet, lime trying to bend it, the touches vanish.
I also have the ghost touches but it seems to only happen when the screen is dirty. As soon as I clean it off, they go away. Would a good screen protector help with that? I may go ahead and try taking off the back and messing with it.
Sent from my AOKP Galaxy S4
I thought mine was fixed, but doesnt seem to be. I technically didnt remove the connectors.. I was nervous, they are WAY fragile. I simply unlocked and pressed firmly on them to attempt to reseat them..
Problem seemed to go away until I used Chrome. Chrome is what seems to trigger odd behaviors for me. I may try another browser and see if it still happens.
I've been dealing with this off and on for about 8 months; asus HAS to be aware of it as my tab has been back twice for this issue (out of warranty now) and I take advantage of their complaint form every month or so.
Here's what I've been working off of (based on personal experience/experimentation):
Re-seating the cables might help for a day or less, but isn't a permanent fix. I even went as far as strategic pieces of tape to hold the flex cables in place and tape across the connectors to encourage them to stay closed.
The first time I popped the back off the larger of the three flexes (with the silver wrap) had partially worked out of the connector on the driver board. Re-seated it and problem disappeared for about a day.
The large copper heat spreader was basically spot contacting the CPU and really wasn't touching the smaller ancillary chips (unit had been running warm for a few months, thought that might make things wonky). I pressed heat shield back down to ensure adhesion, and slightly molded the copper around each chip. Ghost touch gone for two days, unit way cooler running than before.
Here's the interesting one to me. Tonight I noticed that even just hovering my finger close to the screen I can get the 'touch dot' to show; this got me thinking about static. I held the tab in a way that at least one finger of one hand was touching the screen, like towards an edge (out of the active area) while using the other hand to touch the screen. Seemed like one hand was grounding the screen, like a charge couldn't dissipate from the surface.
Isn't this a "capacitive touch' screen? Could it be a matter of grounding?
I too purchased this tablet and dock from Groupon about 4 weeks ago or so as a manufacture refurb. My tablet does the same thing. After about an hour or so use most of the time it starts randomly acting like the screen is being touched. And it appears to only be in the upper right corner area (kinda where the lock screen pattern show up when you unlock it) in landscape mode. Sometimes it may take a little longer of use before it happens. It happens regardless if the dock is plugged in or not. I have figured that if I lock the screen and wait a few seconds and then unlock it. The ghost touches are gone for a while. I first began thinking it may have been a OS issue and hough about rooting and putting a custom rom on it. But from what I have seen on the web it doesnt seem to matter whether its rooted or not. So should I RMA it back or has any one had permenant luck with reseating the cable?
Thanks
ItsDuckie said:
I too purchased this tablet and dock from Groupon about 4 weeks ago or so as a manufacture refurb. My tablet does the same thing. After about an hour or so use most of the time it starts randomly acting like the screen is being touched. And it appears to only be in the upper right corner area (kinda where the lock screen pattern show up when you unlock it) in landscape mode. Sometimes it may take a little longer of use before it happens. It happens regardless if the dock is plugged in or not. I have figured that if I lock the screen and wait a few seconds and then unlock it. The ghost touches are gone for a while. I first began thinking it may have been a OS issue and hough about rooting and putting a custom rom on it. But from what I have seen on the web it doesnt seem to matter whether its rooted or not. So should I RMA it back or has any one had permenant luck with reseating the cable?
Thanks
Click to expand...
Click to collapse
I'd try reseating the ribbons. I kind of doubt it would solve the problem since it's a refurbished with a latent defect. Bad ribbons would strike at random but do not wait for a while before acting up. Look at the glass surface under a magnifying glass and bright light. Hairline cracks cause this after the tab heats up, but you can't always detect them. RMA would be the safe option unless you're really pressed for time.
Ghost touches are back. Noticed I had alot of them when my storage was full. Used a previous recovery (same ROM, just earlier date with less junk installed) and it cut down the frequency of them happening. This is so weird.
I had those ghost touches when 4.2 roms started (CM and AOKP and all of the rest of them. Then someone, I don't remember who had compiled rom with decreased touchscreen sensitivity and ghosting was gone. I think they started with PAC or AOKP, I really don't remember.
Then I went to 4.3 and 4.4 roms and I didn't have one single ghost touch since then. I do noticed sometimes when I hover finger over screen it is registered as touch, but ghosting by itself didn't occur on those roms.
one cent fix
I have an ugly, but effective solution working on my pad right now. It has been in place for about three or four months.
Holding in landscape mode, pulled the bottom left corner back slightly and inserted a penny between the back and the lcd. This put enough torque on the screen to kill all of the ghost touches and it still fits into the keyboard dock. There is an ugly gap where the penny is, but it is now fully functional.
Hope this helps some of you
It started out simple. At first, the screen would cut off when I closed the keyboard sometimes...and then all the time. Next, the touch screen stopped working. Afterwards, the screen would freeze occasionally. Now, I can't see the screen at all.
I'm not ready to give up on this phone yet. I'm just not sure if it's a digitizer and sensor, or the flex cable issue. Does anybody have a clue?
90% need a new flex, be sure to get one with the speaker soldered on to make life easier and take your time reading before disassembly, lots o sticky stuff there
Sent from my Nexus 4 using XDA Premium 4 mobile app
If both the LCD and digitizer are having problems (with no signs of external or water damage), I'd suspect the flex cable as well.
Thanks!
I thought so, but I was in denial. I've only ever replaced digitizers, so I was hoping I just had to do something like that again.
By the way demkantor, what's the other 10%?
9% digitizer going bad and then soon after LCD, 1% software/firmware issue 90% get a new flex. So if it were me id buy the flex, or at least open it up and have a peek around
Sent from my Nexus 4 using XDA Premium 4 mobile app
Changed my flex two times by now, first time lcd showed color noise, second time touch died.
First time there were rips on the flex, second time - nothing particular.
demkantor said:
90% need a new flex, be sure to get one with the speaker soldered on to make life easier and take your time reading before disassembly, lots o sticky stuff there
Click to expand...
Click to collapse
My MT4GS has just gone blank after 3 years of continuous use. Screen went random colour pattern, then totally black, though phone is still working fine behind it.
I've done a search, but places like http://www.etradesupply.com/htc/android-models/htc-mytouch-4g-slide.html suggest there are two - a motherboard flex and a slide rail flex that look very similar but are two different prices. I'm a long way from USA, so spares take a long time to ship and are expensive.Can anyone recommend a supplier/specification so I get the right one? Help much appreciated. Thanks.
In the link you sent those are one in the same, can't say why the prices differ but one may have speaker and one not, I'm on mobile so its hard to zoom in and tell.
As for supplier I'm in the us and have just purchased from random eBay people before so I can't say what's best for you
Also note it is possible you're LCD is bad (but bless likely the cause) if you are to get one of these know which one you have first (there are a couple out there and aren't interchangeable)
demkantor said:
In the link you sent those are one in the same, can't say why the prices differ but one may have speaker and one not, I'm on mobile so its hard to zoom in and tell.
As for supplier I'm in the us and have just purchased from random eBay people before so I can't say what's best for you
Also note it is possible you're LCD is bad (but bless likely the cause) if you are to get one of these know which one you have first (there are a couple out there and aren't interchangeable)
Click to expand...
Click to collapse
Thanks - reading other posts on other threads (inlcuding one guy who posted a picture of exactly the last thing I saw on my screen before it went black (-http://forum.xda-developers.com/showthread.php?t=2092608)) seems to point to the flex. That post also has a link to an ebay sale, but the picture has been taken down so I've only got the name to go on. And of course that doesn't match what I can but other places so I'm just guessing at the moment..
Is it the main motherboard flex? Perhaps I'll have to strip the phone at the weekend and see if I can work it out... Oh well, another thing to add to the To-Do list. No wait, that's on my phone and I can't get at it!
This will be my second replacement through Amazon. My first unit wouldn't read any sim I placed in the device which I just put down to bad luck considering I couldn't find any other user with the same issue. The second (my current unit) has developed a sort of LCD distortion around the mid right of the screen. When touched it is visible enough to cause me to notice it when using apps with lighter backgrounds, it is even more prominent when using the stylus. I have never encountered this on any touch screen I have used before and was wondering if anyone else has had this? I saw a thread on the NVIDIA forums discussing it but not on here.
I will say this much for sure, on the two units so far the battery life has been terrible. I really want to love this device as overall it's been great for games and emulation... but with all the issues and battery life i'm thinking that if this unit is no better i'll give this tablet a miss and hope the next version is fixed.
SamualStrand said:
This will be my second replacement through Amazon. My first unit wouldn't read any sim I placed in the device which I just put down to bad luck considering I couldn't find any other user with the same issue. The second (my current unit) has developed a sort of LCD distortion around the mid right of the screen. When touched it is visible enough to cause me to notice it when using apps with lighter backgrounds, it is even more prominent when using the stylus. I have never encountered this on any touch screen I have used before and was wondering if anyone else has had this? I saw a thread on the NVIDIA forums discussing it but not on here.
I will say this much for sure, on the two units so far the battery life has been terrible. I really want to love this device as overall it's been great for games and emulation... but with all the issues and battery life i'm thinking that if this unit is no better i'll give this tablet a miss and hope the next version is fixed.
Click to expand...
Click to collapse
I have this issue with my tablet, and unfortunately lots of people on the geforce forums are as well. Supposedly the RMA units being sent out as replacements overwhelmingly have the same issue (See Jasons posts at https://forums.geforce.com/default/topic/793383/shield-tablet/nvidia-guilty-of-fraud/1/). I have an RMA being sent to me as we speak, and I really hope I don't have this problem again.
bill0405 said:
I have this issue with my tablet, and unfortunately lots of people on the geforce forums are as well. Supposedly the RMA units being sent out as replacements overwhelmingly have the same issue. I have an RMA being sent to me as we speak, and I really hope I don't have this problem again.
Click to expand...
Click to collapse
I contacted Amazon to ask about the feedback they have received on units they've sold, the customer service advisor claimed nothing but positive feedback and no issues such as the ones on the Nvidia forums. All of that said, from what i've seen so far, this tablet is riddled with manufacturing flaws and i'm worried the lifespan will be much shorter than any smartphone or tablet I have bought before.
I feel sorry for the consumers who have had to RMA they're units multiple times, this will be my third Shield Tablet and it seems many others have gone through 3 or more to find one that is right, is this acceptable?
Then others score a perfect tablet like myself.
Same thing with phones, when N5 was released, never saw so many go through so many returns to achieve a level of some perfection.
Yet, the two I bought were perfect, I just don't get it myself neither.
Same happened with N7(13), N4 and N7(12).
I never had to return one because it was defective.
I read about this supposedly sub par in cell tech used on our display, that it distorts under pressure. I called bs on it first time I read it, tested myself, had to push so hard moisture in my skin wouldn't allow me to slide my finger on display.
Seem excessive?
Sure does, now if you're just touching it an it happens it is an issue, but if you can see blood pooling under your finger nail, the defect is above screen level IMO.
Harsh maybe, I'm sorry but that's my view on it here.
WR
WarRaven said:
Then others score a perfect tablet like myself.
Same thing with phones, when N5 was released, never saw so many go through so many returns to achieve a level of some perfection.
Yet, the two I bought were perfect, I just don't get it myself neither.
Same happened with N7(13), N4 and N7(12).
I never had to return one because it was defective.
I read about this supposedly sub par in cell tech used on our display, that it distorts under pressure. I called bs on it first time I read it, tested myself, had to push so hard moisture in my skin wouldn't allow me to slide my finger on display.
Seem excessive?
Sure does, now if you're just touching it an it happens it is an issue, but if you can see blood pooling under your finger nail, the defect is above screen level IMO.
Harsh maybe, I'm sorry but that's my view on it here.
WR
Click to expand...
Click to collapse
It's definitely a problem with this tablet, that and the cracked edges i've been seeing a lot of topics on. I've been using touch screen devices since around the time of the 1st generation iPod touch and i've never returned a single product back with any of the issues i've had/seen with this tablet which I am now on my third unit.
The screen itself needs little pressure for the screen to distort, which is now in two places on the screen. I'm far too careful with my devices and do not use excessive pressure on the screen.
SamualStrand said:
It's definitely a problem with this tablet, that and the cracked edges i've been seeing a lot of topics on. I've been using touch screen devices since around the time of the 1st generation iPod touch and i've never returned a single product back with any of the issues i've had/seen with this tablet which I am now on my third unit.
The screen itself needs little pressure for the screen to distort, which is now in two places on the screen. I'm far too careful with my devices and do not use excessive pressure on the screen.
Click to expand...
Click to collapse
Yes, I do believe there are some bad units made.
Nvidia is a gem for standing behind unit so well.
Hopefully you get a decent one soon.
WR
SamualStrand said:
I contacted Amazon to ask about the feedback they have received on units they've sold, the customer service advisor claimed nothing but positive feedback and no issues such as the ones on the Nvidia forums. All of that said, from what i've seen so far, this tablet is riddled with manufacturing flaws and i'm worried the lifespan will be much shorter than any smartphone or tablet I have bought before.
I feel sorry for the consumers who have had to RMA they're units multiple times, this will be my third Shield Tablet and it seems many others have gone through 3 or more to find one that is right, is this acceptable?
Click to expand...
Click to collapse
I'm happy to say the RMA'd unit I received is in great working order. No screen issues, no battery issues, wifi is good, and speakers/build quality are good.
Hi there yes mine to has a screen distortion around the sim card area . if I press harder with pressure but with the stylus its fine
I will Returning this to amazon where I had purchased from
bill0405 said:
I'm happy to say the RMA'd unit I received is in great working order. No screen issues, no battery issues, wifi is good, and speakers/build quality are good.
Click to expand...
Click to collapse
Since you have no battery issues, what is your screen on time like during a full cycle. I have been wondering since I get only about 3 1/2 hours.