Database Info

xda 11 screens

i have 2 spare xda 11 one is blocked and the other the screen is bugged up.
i want to change the screens so at least i have one phone working how do i fix or undo screen parts thanku someone please help dont want to buy another screen when i have 2 the same

Yo dude, the best thing to do would be to take the screen from the phone thats blocked n(coz no matter what, you'll never be able to use that phone anyway!!) and fix it into the one with the broken screen. If you do a search here, there are guides to taking apart an XDA II, and as long as you haven't got 10 thumbs, it should be fairly easy to do!!!
I've done this myself so I know it works, but the only thing you need to be wary of is there are two models of screen, just hope that both phones have the same model installed otherwise It could get a little more complicated!!
RR

Replacing the screen
I am in a similar situation, I have an XDA2 with a broken screen and another one with a damaged bottom connector. I pulled them both apart to put the good screen into the one with a good mother board but to me the screen connector (the one that plug into the mother board) they look different. Just wondering if anybody has come across this. Cheers, Guito

[Q] Busted LCD got blue screen?

Okay strait to the point! I've got a Galaxy S2 with Android 4.0.3 bought it 4 months ago.
I accidently dropped my phone and cracked my screen on the bottom right corner. The crack went from bottom and a diagonal line up til the right side. I took a picture below.
imageshack(.)us/photo/my-images/685/20120326152703.jpg
This happened about 2 months ago. No problem since. I dropped the phone a few times afterward but it didnt seem to affect it lucky me.
Yesterday i tried watch some series over my WIFI and the phone got really hot around the camera area. The phone wasn't acting well either and then battery dropped from 75% til about 10% in 10 minutes without any video still showing up. (Never had that problem before). I stopped using it and instead put it on recharge for the next day. And today on the morning it was still okay. Went to school and back with the mobile still working. Put it on my table and checked my PC.
About 2 hours later while cheking up on my galaxy i discovered this.
imageshack(.)us/photo/my-images/198/20120326153629.jpg
I think that the LCD finally busted but i need to be sure if it has something to do with the previous crack and also if you could provide any info about what to do with it? Does my warrenty cover this? Or do i need extra insuranse?

I really need help right now LCD blackned spots
The screen has started to turn black from the core of the LCD leak. I now really think this is a broken LCD screen and not a software problem. If someone knows what i could do to fix this i really could need the help right now.

Someone correct me if I'm wrong,
But it sounds to me like you've busted the digitizer portion of your device. As to it being caused by the small crack on your screen.. i don't really know(can't really see if it's a crack in the glass or digi). At any rate, judging from the second picture you provided us it most definitely looks like you damaged the digitizer.
Most companies don't really cover damaged screens caused by users. However, being that your S2 is only 4 months old you could possibly pass it as "it did it by itself, I don't know what happen". Worth a shot I guess...
If all fails you could bring it to a electronics repair shop or you can repair it yourself via a digitizer part bought on ebay(probably pretty expensive being that its part of the screen)

If all else fails check ebay for a new screen.

cbr69er said:
If all else fails check ebay for a new screen.
Click to expand...
Click to collapse
http://www.ebay.com/itm/Full-LCD-Di...ltDomain_0&hash=item27c3101beb#ht_1618wt_1185
If your thinking about taking the DIY road I found a screen for you.Quick note about buying something overseas on eBay: it usually takes awhile for the part to ship and even when you get it, the part may not be functional. But don't fret, eBay is usually pretty good about stuff like this so a working part will be guaranteed or your money back!
If you do decide to repair it yourself I would first research A LOT about your phone. Especially, the disassembly guide! Try to use only credible guides such as iFixit, repair universe etc.
This only applies to flex ribbon cables:
when replacing screens sometimes you have to plug it in a few times before you actually get it to respond(could be cause by oxidation of the pins) if thats the case, you could try to take a #2 pencil eraser and gently rub against the pins and remove the oxidation...
Good Luck!
Please let me know how it goes!

rhodium9 said:
As to it being caused by the small crack on your screen.. i don't really know(can't really see if it's a crack in the glass or digi).
Click to expand...
Click to collapse
Yes it is really a crack and a very annoying one. It doesn't cause any problems with the touch-function, so I've been using it normally but for the screen, it has gone completely black but for the top right part still a little darkblue. I think I'm going with your first answer and try to check it in on warranty have had a bit luck with it past couple of times but im not sure about changing it myself. If having no luck with warranty then maybe ill try doing it myself.

at any rate weather you get warranty to change it or you fix it yourself maybe youll learn to be more careful and get a case maybe???

DO NOT try to replace the screen by yourself

I dropped my three-week old HTC one X on driveway by accident. The screen was shattered like a spiderweb. So I ordered a HTC One X screen/digitizer replacement from Amazon.
Today I tried to follow each step described in youtube ( http://www.youtube.com/watch?v=ceHw6mezG60). In the last step when tried to separate glass screen from LCD, the LCD was ruined.
The glass and LCD were glued very tight. In my opinion, it is almost impossible to separate them safely. There are some differences in cables and connectors between the US version and the one showed in youtube (i assume it is the international version). There is one cable in the AT&T version that is very hard to disconnect.
Just to be clear, I consider myself very handy in electronics. I hope you can learn from my lesson. Tomorrow, I am going to send the phone to HTC repair center. Since I voided the warranty by disassembling it. I have no idea how much they will charge me.

i learned my lesson on this with a friends Inspire 4G...I have changed many many iphone screens, but the Inspire was a whole different ball game, and i would expect the One X to be even worse.
You are right, pay someone to do it.

jjss4433 said:
I dropped my three-week old HTC one X on driveway by accident. The screen was shattered like a spiderweb. So I ordered a HTC One X screen/digitizer replacement from Amazon.
Today I tried to follow each step described in youtube ( http://www.youtube.com/watch?v=ceHw6mezG60). In the last step when tried to separate glass screen from LCD, the LCD was ruined.
The glass and LCD were glued very tight. In my opinion, it is almost impossible to separate them safely. There are some differences in cables and connectors between the US version and the one showed in youtube (i assume it is the international version). There is one cable in the AT&T version that is very hard to disconnect.
Just to be clear, I consider myself very handy in electronics. I hope you can learn from my lesson. Tomorrow, I am going to send the phone to HTC repair center. Since I voided the warranty by disassembling it. I have no idea how much they will charge me.
Click to expand...
Click to collapse
Why don't you just order the whole LCD/digitizer/glass module? And of course the things gunna be hard to separate, you need to heat it up A LOT to loosen the glue
Sent from my Evo3d using Tapatalk 2

stumpyz9 said:
Why don't you just order the whole LCD/digitizer/glass module? And of course the things gunna be hard to separate, you need to heat it up A LOT to loosen the glue
Sent from my Evo3d using Tapatalk 2
Click to expand...
Click to collapse
Agreed
I learned my lesson with iphone/ipad digatizers. Of course its less than half the price for just the digi but the lcd/digi combo is definitely the way to go. If you do get it separated you have a lot of cleaning to do to get all the old glue/glass off and they are much harder to get back together than you would think. Also invest in a good set of tools. The tools are garbage that they send with the parts.

jjss4433 said:
I dropped my three-week old HTC one X on driveway by accident. The screen was shattered like a spiderweb. So I ordered a HTC One X screen/digitizer replacement from Amazon.
Today I tried to follow each step described in youtube ( http://www.youtube.com/watch?v=ceHw6mezG60). In the last step when tried to separate glass screen from LCD, the LCD was ruined.
The glass and LCD were glued very tight. In my opinion, it is almost impossible to separate them safely. There are some differences in cables and connectors between the US version and the one showed in youtube (i assume it is the international version). There is one cable in the AT&T version that is very hard to disconnect.
Just to be clear, I consider myself very handy in electronics. I hope you can learn from my lesson. Tomorrow, I am going to send the phone to HTC repair center. Since I voided the warranty by disassembling it. I have no idea how much they will charge me.
Click to expand...
Click to collapse
The price you pay for having those perfect 180 degree viewing angles and outdoor visibility...

stumpyz9 said:
Why don't you just order the whole LCD/digitizer/glass module? And of course the things gunna be hard to separate, you need to heat it up A LOT to loosen the glue
Sent from my Evo3d using Tapatalk 2
Click to expand...
Click to collapse
A screen is about $50, and a screen/LCD combo is at least $180. If I knew it was so hard to separate, I would probably order the combo. Another concern is, I am not really sure that the LCD/glass combo from ebay is as good as that from HTC.

Fyi I had HTC replace my cracked screen. They also replaced the housing (new case, yay) for some reason. They had it for two days plus 3 days shipping time to get it back. Total cost was $220. I'm handy in electronics but seems this is the way to go for now based on costs for the full assembly. They really had great service through the process and you can track the repair online.
Sent from my HTC One X using XDA

Oh how I wish I saw this thread before..
So I sure did break my digitizer.. and when I tried to replace it, it sure was glued to the LCD, and it did come apart lol. On the brighter side, I got a new digitizer and tools, I ordered an LCD but they shipped the wrong one.. but I will say this, I don't think it's that hard to take apart and reassemble.. aside from everything being glued together, and from what I gather the international version is not this way. Everything seems to make sense. I am starting to get lonely without her working. Sometimes I ADB into her just to say hi, mount my storage and make sure I got everything out just in case I butterfingers it and short something out. So aside from my agreement, here are the lessons I have learned.
1) Have a hair dryer handy, that glue is like concrete.
2) Don't just tug that battery cable out, the wires will come out of a socket (took 2 hours to get em back in)
3) For those of you whose digitizers and LCD's are broke.. "adb shell /system/bin/sdutil ums enable" will mount your storage so you can backup some stuff.
4) That torx screw driver you think you might need, haven't seen a torx screw yet, just loads of glue.
5) Take pictures of stuff before you disconnect it, and how you disconnected it for reference in reassembly.
6) This is the correct part # for the LCD 60H00664-01P, except no substitutes.
7) There are little crystal gluey things on the back of the digitizer that go through the case and transfer light. Don't expect them to fully light up ever again without remembering to move them (if you can)
8) It's worth fixing, sure I pre-ordered an HTC-One, but my One X will remain my phone because I love her, she's my first HTC and by far my best android ever. My HTC-One will be for Dev purposes >
9) Resist the urge to take the heat shield off to see if you can upgrade your storage by some kind of hidden micro sd, even if there is one, I'm sure it's got 5lbs of that crappy glue AT&T insisted upon.
10) If you think you want to change your digitizer just to rid your self of the AT&T logo, It's not worth it, I'm in it for 18$ for the digitizer and $43.99 for the LCD. Sure it's worth the money, but my sanity is long gone, I will name my next dog sanity.
You guys are the best ever! Good luck! God Speed!

Hunt3r.j2 said:
The price you pay for having those perfect 180 degree viewing angles and outdoor visibility...
Click to expand...
Click to collapse
I can't even see my screen outside.. what am I doing wrong
Sent from my HTC One X using xda app-developers app

ceo4eva said:
I can't even see my screen outside.. what am I doing wrong
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Are you running viper Rom by chance?
Sent from my HTC6435LVW using Tapatalk 2

beaups said:
Fyi I had HTC replace my cracked screen. They also replaced the housing (new case, yay) for some reason. They had it for two days plus 3 days shipping time to get it back. Total cost was $220. I'm handy in electronics but seems this is the way to go for now based on costs for the full assembly. They really had great service through the process and you can track the repair online.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
I think I might do this if AT&T doesn't let me take my upgrade early to the One. So you would recommend HTC to do this? Just out of curiosity, was your phone rooted/romed when you sent it in? How long ago was this done for you?

jjss4433 said:
The glass and LCD were glued very tight. In my opinion, it is almost impossible to separate them safely. There are some differences in cables and connectors between the US version and the one showed in youtube (i assume it is the international version). There is one cable in the AT&T version that is very hard to disconnect.
Just to be clear, I consider myself very handy in electronics. I hope you can learn from my lesson. Tomorrow, I am going to send the phone to HTC repair center. Since I voided the warranty by disassembling it. I have no idea how much they will charge me.
Click to expand...
Click to collapse
So if you can't do it, no one can?
ceo4eva said:
I can't even see my screen outside.. what am I doing wrong
Click to expand...
Click to collapse
Are you not enabling auto brightness?

Well..
Not that if he can't do it no one can, but the threshold of glue being heated to separation vs. the heat destroying the lcd is so close.. and the parts are so cheap to get independantly of one another. In the words of the hunger games.. may the odds be forever in your favor.
thebobmannh said:
So if you can't do it, no one can?
Are you not enabling auto brightness?
Click to expand...
Click to collapse

Hmm..
LOL figures I would run into a problem like this, new screen stops the phone from booting, old screen fires up the phone, if i plug in the new one while its running, the new one works fine, if i restart, back to death.. i could reassemble with it still running and pray i never need to restart my phone, but that would be messed up.. any ideas?

I've never had problems with it. Even while drinking. Just apply heat, then pull. If it doesn't come that easily, then it isn't hot enough or hasn't heated evenly.

Btw the combo fpr screens and digitizer rins $50-75 on eBay
Sent from my HTC One X using xda premium

Hello
Alright, so I had my lcd digitizer combo replaced, since the glass was broken. At first the lcd didnt work because it was AOM or something like that and wasnt Sharp's model like originally, but i syncded it as follows:
1.Took out the battery
2.Connected the old screen
3.Put back your battery
4.Start your phone
5.Wait about 2min to be sure
6.Take the old screen and replace it by the new
7.Press power button
8. Should be running and working.
But now.. after assembly it does detect the sim card, but gets no signal, so i cant make calls go to internet etc.. But wlan however does work ?
is there something I broke in the progress or ..
Hoping for some help, thanks

Delacty said:
Hello
Alright, so I had my lcd digitizer combo replaced, since the glass was broken. At first the lcd didnt work because it was AOM or something like that and wasnt Sharp's model like originally, but i syncded it as follows:
1.Took out the battery
2.Connected the old screen
3.Put back your battery
4.Start your phone
5.Wait about 2min to be sure
6.Take the old screen and replace it by the new
7.Press power button
8. Should be running and working.
But now.. after assembly it does detect the sim card, but gets no signal, so i cant make calls go to internet etc.. But wlan however does work ?
is there something I broke in the progress or ..
Hoping for some help, thanks
Click to expand...
Click to collapse
Sure sounds like you didn't re-connect the cell antenna correctly. Those ribbon cables are a *****. Could also be the little EMI tabs that come off of the blue antenna PCB and connect to the case, I would think (just guessing, as I'm staring at my disassembled phone right now).

thebobmannh said:
Sure sounds like you didn't re-connect the cell antenna correctly. Those ribbon cables are a *****. Could also be the little EMI tabs that come off of the blue antenna PCB and connect to the case, I would think (just guessing, as I'm staring at my disassembled phone right now).
Click to expand...
Click to collapse
Is the cell antenna the black wire ? if thats the case, im pretty sure its well connected.

Delacty said:
Is the cell antenna the black wire ? if thats the case, im pretty sure its well connected.
Click to expand...
Click to collapse
I'm not positive which is the cell and which is the WiFi, to be honest....

[Q] mt4gs wont turn on vibrates once

hello all looked every where seen similar ? but know answers any where .....have mt4gs that wont turn on just vibrates once was having problems with screen stuff looked distorted rainbow colored or screen not responding would have play with phone like slide keyboard in and out to get working again .....couldnt get to work pulled out battery put back in wouldnt start up.......same thing happen to the one before that similar prob still have it does same thing vibrates once........from what i gather from other posts is it might be flex cable have it apart flex cable looks fine ...would i be able to see if flex cable is messed up......... could it just be something came loose.......these are both factory oem no mods ...

If it's still under any kind of warranty I'd send it back with a note to quit returning the same phone to you. If you CAN send it, put a small indelible mark under the battery so you can check. If it's NOT covered you could theoretically fix it yourself if you're "electronics repair" inclined but it's not for the faint of heart....i.e., not easy.
If they try to SELL you another, you can get them on Ebay for half of what they'll try to sell you one for. For what they'll try to sell you one for, you can buy a Nexus 4 from google that's unlocked.....with enough change to take your GF out for a nice meal. A REALLY nice meal.

no warranty , not new to electronic repair or modding ....have two of these phone dont want to throw them out ..especially if it only needs and 18 dollar flex cable ...which would be cheaper than buying any used phone....... trying to find some info first so i dont waste money on flex cable for no reason ...ps phone is totally apart..........i think phone is turning on but nothing happens with screen and screen was buuging out when stopped working both times on both phones ..... any ideas thanx

Look at all the videos first.....
docflipside said:
no warranty , not new to electronic repair or modding ....have two of these phone dont want to throw them out ..especially if it only needs and 18 dollar flex cable ...which would be cheaper than buying any used phone....... trying to find some info first so i dont waste money on flex cable for no reason ...ps phone is totally apart..........i think phone is turning on but nothing happens with screen and screen was buuging out when stopped working both times on both phones ..... any ideas thanx
Click to expand...
Click to collapse
I just rebuilt my Slide (bought a new one that had a bad M/B on eBay for $65)--I tried to replace the digitizer & ended up breaking the LCD screen...The flex cable is between the LCD & the screen back mount....so it's not the easiest job.......Do yourself a favor & check out all the video on youtube first.

not a problem ..phones apart ...got skillz..... just looking for info ....i can take apart and put back together just about anything thats not the problem.ive done digi's ,broken screens,flex cables, power and volume buttons............ ive heard of this problem before just want to make sure i have the right solution ...so i dont buy the wrong part thank you
ps ...please no more posts about how hard it is.....

He does have a point, this phone is a pain in the ass compared to most, I too have disassembled many phones used to have a side business repair phones, and this was is possibly the biggest pain when it comes to how much sticky is used.
Anyway yeah it sounds like the main flex cable and that's where I would start.
Sent from my Nexus 7 using xda premium

So end result fixed first one....installed new main flex cable.....and tested it powered up and works fine just have to go back and screw her all together...was pain in the ass at the point where you need to separate lcd from slide housing but well worth will do another one tomorrow ....always first ones a ***** but not as hard as made to seem ......if any one needs help get at me will give pointers. will update again tomorrow
if any one has mt4gs and vibrates once and screen does not turn on its good bet its the main flex cable

same issue....
docflipside said:
So end result fixed first one....installed new main flex cable.....and tested it powered up and works fine just have to go back and screw her all together...was pain in the ass at the point where you need to separate lcd from slide housing but well worth will do another one tomorrow ....always first ones a ***** but not as hard as made to seem ......if any one needs help get at me will give pointers. will update again tomorrow
if any one has mt4gs and vibrates once and screen does not turn on its good bet its the main flex cable
Click to expand...
Click to collapse
i replaced the digitizer because it was cracked, in the process i broke the lcd, and tore the flex cable a little. i replaced both of those and now i cannot get the screen to turn on. if u or anyone else have any ideas that would be awsome! thanks in advance
p.s i have the htc mytouch 4g slide

There are multiple screen options for this phone, they all fit but aren't interchangeable, make sure your new one is made by the same company as old one
Sent from my Nexus 4 using xda premium

demkantor said:
There are multiple screen options for this phone, they all fit but aren't interchangeable, make sure your new one is made by the same company as old one
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
the phone was givin to me and i ordered the part on ebay it came from china. the package says. LH00042 LCD DISPLAY TOUCH SCREEN FOR MYTOUCH 4G. how would i know if it is the right part?

There are a few ways, usually the manufacturer is stickered on the back or product number. If you can't find this there is a line indented across the back of one and not the others
Also read this
http://forum.xda-developers.com/showthread.php?p=33221940
Sent from my Nexus 4 using xda premium

jayj4ysmith said:
the phone was givin to me and i ordered the part on ebay it came from china. the package says. LH00042 LCD DISPLAY TOUCH SCREEN FOR MYTOUCH 4G. how would i know if it is the right part?
Click to expand...
Click to collapse
This forum is dedicated to the MT4GS. Your description indicates the MT4G. Different devices.
Hastily spouted for your befuddlement

LG G2 questions

I picked up a used LG G2 from Ebay. The phone is in somewhat great shape and is functional except for the top portion of the digitizer. About an inch, give or take, at the top is unresponsive to touch. I just wanted some input on how common digitizer damage is on this phone. I know most phones these days are very delicate and the digitizers and LCD's can be damaged quite easily. There is a good knick at the top of the phone so I am guessing it had been dropped at one point.
I paid $150 for the phone and I can pick up the LCD, digitizer, and mid body assembly for $65 on Ebay. Just have to slap the internals in the new mid body, throw the back cover on, and done. Phone is good as new. But I don't want to make that investment IF by some chance the problem isn't the digitizer but rather something wonky with the main board. The more input the better. Thanks guys.

It's the digitizer, I sent mine in for the same thing.. Dunno how much it cost tho cause I had warranty. Hope it goes well replacing it
Sent from my LG-D800 using XDA Free mobile app

Thanks MaestriFC. While I was waiting on a response for this, I noticed the phone decide to go quirky on me. I looked it up and found on XDA this is a common problem? Phantom touches, etc.? I seen a couple people say it is still the LCD and digitizer causing these issues and replacing them fixed it.

Well I dropped my phone on tile with no case so I don't think it's a common issue (unless everyone is dropping them) but from what I read the digitizer was loose so you would have to open the phone and connect it, or get it serviced, I don't remember getting Phantom touches though..
Sent from my LG-D800 using XDA Free mobile app

Yeah. I read on another forum about it and found links to these problems here on XDA. Apparently, this phone going spaztic is a very common thing. Which still hasn't been traced down to any one specific thing. Most are having LG replace their phones just to get another one doing the very same things. I am going to order the new LCD and digitizer though. Hopefully it fixes the issues. Maybe LG got a batch of faulty digitizers or something....lol...here's to hoping.

Make sure you do your research on replacing haha wouldn't want anything else messed up... In my opinion you should just try to connect it properly and see if that works, that's if you're going to open it anyways of course, could save some money.. Good luck :thumbup:
Sent from my LG-D800 using XDA Free mobile app

I tried that. I opened it up, and from what I could tell the phone has never been opened. The screws were tight and came out with some black stuff on the threads. That's USUALLY a sign the phone has never been opened. I reseated the top and bottom connectors for the digitizer. The one on top and the one on bottom, I didn't reseat the other one at the bottom though. But I figured that one was for the bottom portion of the digitizer anyway. Which is working. When the phone starts up, every now and again, the "LG" screen will just flicker then boot up. But most times the "LG" screen shows as normal when booting up.
I did also find out from normal calling that the microphone for speaker phone isn't working properly. Normal headset works just fine. But when I switch it to speaker phone people can barely hear me. But that microphone costs like 8 bucks to change so no big deal. I have checked out many youtube vids on fixing this phone. It can be challenging to have to remove everything but I have found just buying the LCD and digitizer already mounted to a new mid body is the easiest way to go.

So the repeating the digitizer didn't work? I would buy the two together as it would be a lot easier than separating the two.. Might just be you had a faulty one after all
Sent from my LG-D800 using XDA Free mobile app

I haven't replaced it yet MaestriFC. I will report back in a couple weeks though when I do get the new screen in and get it all replaced. What didn't work was opening her up and re seating the cables. I thought maybe something could have been or come loose but that wasn't the case.

Just an update guys. I got the whole LCD and Digitizer replaced last night. It's only been a few hours but so far everything is great. No more glitching out. As a matter of fact, I had no choice but power the phone down last week. That's how bad the glitching out got. My phone was totally unusable. But now with the new screen, it's working great. If it stays working great then we can assume the problems with this phone are the cause of bad digitizers.