Related
Hello Geeks
I have rooted my htc sensation last night and Flash CWM Recovery HBoot 1.27.0000.
I managed to root and installed superuser. After i installed a new font installer apk, the problem started.
I reboot my htc after installed it and it stuck at HTC (Quitly Briliiant) screen.
and I tried several times removed battery and put it back. it can't solve the problem.
I can access to Hboot, and i see Fastboot, Recovery, Factory reset, SImlock, IMaGe CRC,
i tried to recovery, it hangs, samething to Factory reset, (didn't try simlock) and Image crc work fine.
And another problem is after i unplug the phone from usb or wall charger, the red light is still on.
i have no idea what to do.
HOPE can someone here help me with something?
thanks in advance.
(will post more detail if someone needs it)
Perhaps you would like to try and re-flash the CWM Recovery again? If you can't access recovery, most likely your CWM Recovery is corrupted.
wlteh said:
Perhaps you would like to try and re-flash the CWM Recovery again? If you can't access recovery, most likely your CWM Recovery is corrupted.
Click to expand...
Click to collapse
what if the phone can't be detected by pc? i can't connect to pc via usb last ngiht.
can you boot into bootloader?
yes. i can go into bootloader
from bootloader you can flash the recovery
jus connect the phone from bootloader to pc (phone reads fastboot usb after this)
get the recovery.img and copy it to your adb/fastboot folder
then open command window there
and type this command
fastboot flash recovery recovery.img
that should give you the recovery ....then go to recovery and reflash the rom
let me try and get back to u, sorry for late reply, just back from work
btw, how do i get recovery.img file ? sorry for noob q
i m kind of newbie to rooting and those stuffs
i managed to recovery. what's the next step? install custom ROM? and how to please?
ydoubleun said:
i managed to recovery. what's the next step? install custom ROM? and how to please?
Click to expand...
Click to collapse
if you are S-ON then follow this thread to install a rom
http://forum.xda-developers.com/showthread.php?t=1631861
don't forget to superwipe first before install a rom and also enable smartflash if you have 4ext recovery installed
if not then i suggest to install that recovery
rzr86 said:
if you are S-ON then follow this thread to install a rom
http://forum.xda-developers.com/showthread.php?t=1631861
don't forget to superwipe first before install a rom and also enable smartflash if you have 4ext recovery installed
if not then i suggest to install that recovery
Click to expand...
Click to collapse
Thanks mate,
can it be battery problem as it hangs after installed custom ROM from sd card?
i saw installing form zip file under recovery options.
please help me answer too.
thanks again
ydoubleun said:
Thanks mate,
can it be battery problem as it hangs after installed custom ROM from sd card?
i saw installing form zip file under recovery options.
please help me answer too.
thanks again
Click to expand...
Click to collapse
i don't think it is a battery issue.maybe a corrupted file(or it is an old link)
follow the steps from the guide and report results
best wishes
i managed to install 4EXT and i installed custom ROM (MIUI-PyroMod-Pyramid-V1.1.zip).
Now i saw my phone is rebooting again and again, is it normal?
i assume you are S-ON
if yes then do extra 1 from the same guide(flash boot.img)
rzr86 said:
i assume you are S-ON
if yes then do extra 1 from the same guide(flash boot.img)
Click to expand...
Click to collapse
Yes. i m S-ON. ok, i m gonna do it now.
done with flash boot.img, it is rebooting again and again...
ydoubleun said:
done with flash boot.img, it is rebooting again and again...
Click to expand...
Click to collapse
ok then start again:
1)superwipe
2)enable smartflash from recovery
3)flash the rom again
wait ..no superwipe for AOSP/CM9/CM10/AOKP based ROMS ..its not compatible
use inbuilt wipe feature in 4EXT
4EXT -> wipe | format -> format all partitions except sdcard
i have an error msg, installation aborted!
sd card/ folder name/ Android_Revolution_HD-One_X_EB-2.zip..
ganeshp said:
wait ..no superwipe for AOSP/CM9/CM10/AOKP based ROMS ..its not compatible
use inbuilt wipe feature in 4EXT
4EXT -> wipe | format -> format all partitions except sdcard
Click to expand...
Click to collapse
ok. didn't see u replied before me. ok doing it now.
thanks for replying me..
i still have this error message
E:error in / sdcard/Rom application/Android Revolution HD.xxxx.zip
(status 0)
Installation aborted
hi to all.i rooted my mobile running 2.3.3 after that i installed clockworkmod recovery latest version from playstore..i came to know that clockworkmod stopped giving support for our device.
now anyone pls telme how can i install custom recovery
Find and install ROM Manager Premium v5.0.0.3.
xander21 said:
Find and install ROM Manager Premium v5.0.0.3.
Click to expand...
Click to collapse
ROM Manager, any version, is the wrong way to go about installing a recovery for any Optimus One device. My tool, Android Flash Recovery ( link is in my signature ), and LGMDP are the safest ways to install a recovery for these devices.
You can download CWM 5.0.2.7 for P500 here.
Android Flash Recovery and LGMDP both require LG's official drivers to be installed. Both are Windows only applications.
shinobisoft said:
ROM Manager, any version, is the wrong way to go about installing a recovery for any Optimus One device. My tool, Android Flash Recovery ( link is in my signature ), and LGMDP are the safest ways to install a recovery for these devices.
You can download CWM 5.0.2.7 for P500 here.
Android Flash Recovery and LGMDP both require LG's official drivers to be installed. Both are Windows only applications.
Click to expand...
Click to collapse
bro what is the next step after installing recovery..i did it with cwm recovery before ..is it the same process?
shinobisoft said:
ROM Manager, any version, is the wrong way to go about installing a recovery for any Optimus One device. My tool, Android Flash Recovery ( link is in my signature ), and LGMDP are the safest ways to install a recovery for these devices.
You can download CWM 5.0.2.7 for P500 here.
Android Flash Recovery and LGMDP both require LG's official drivers to be installed. Both are Windows only applications.
Click to expand...
Click to collapse
... or use flash image GUI app if access to PC is somewhat limited
Sent from my GT-I9082 using Tapatalk
s.venkatesh34 said:
bro what is the next step after installing recovery..i did it with cwm recovery before ..is it the same process?
Click to expand...
Click to collapse
Yes. Once CWM recovery is installed you the use the recovery to flash ROMs and patches. You can use CWM or any other recovery to flash another recovery too. Just remember to make 100% sure that it's for your device.
Sent from my LG-P769 using Tapatalk
ROM Manager is OK but only places old versions of CWM. Newer ones need to be flashed from current recovery (zip files) or flash_image command or flash image app if img files.
LGDMP? Watch out.
Hello, I have a xt925 with KK stock, and before I do s##it my recovery with CWM 6.0.4.4 worked normally
But as I am idiot I tryed to install philz advanced recovery... Ok installed sucessfull... After I tryed to back to my CWM 6.0.4.4 and now I can't open recovery and install any recovery because on promt show me (Variable not supported)...
Can anyone help me ? How will I get my recovery back ?
I have root, I have bootloader unlocked I have everything or almost everything .... please help me
Have you installed the correct version accordingly to your device/BL?
Sent from my Razr HD, Unlocked KKBL, latest CyanogenMod CM11 KK 4.4.4 ROM, ART runtime.
RMarques said:
Have you installed the correct version accordingly to your device/BL?
Sent from my Razr HD, Unlocked KKBL, latest CyanogenMod CM11 KK 4.4.4 ROM, ART runtime.
Click to expand...
Click to collapse
Yes... I know how to do it, the same CWM I installed before I install the philz didn't work
@edit : I did the download of the last version of minimal adb and fastboot, but it didn't work... and my boot loader is already unlocked when I run "fastboot oem unlock" blablabla....
I dont know why I'm not getting to install cwm if I already had it installed
I tryed with mfastboot and erase recovery and flash recovery...
Ican't erase with sucesfull, but I got to flash a new CWM but... When I tryed to acess her my boot logo stay freezed
RaR System said:
I tryed with mfastboot and erase recovery and flash recovery...
Ican't erase with sucesfull, but I got to flash a new CWM but... When I tryed to acess her my boot logo stay freezed
Click to expand...
Click to collapse
Go to this link
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-32/
...and download this fastboot version "SNAPDRAGON FXZ SUPPORT". It has solved all my fastboot problems!
RMarques said:
Go to this link
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-32/
...and download this fastboot version "SNAPDRAGON FXZ SUPPORT". It has solved all my fastboot problems!
Click to expand...
Click to collapse
I need to register in this forum, but this work ? I wont reset my phone right? and work with xt925?
RaR System said:
I need to register in this forum, but this work ? I wont reset my phone right? and work with xt925?
Click to expand...
Click to collapse
Yes, you will.
No, it cant do nothing by itself, its just the correct ADB module for a XT925 device...and it pretty much answer your next question.
RMarques said:
Yes, you will.
No, it cant do nothing by itself, its just the correct ADB module for a XT925 device...and it pretty much answer your next question.
Click to expand...
Click to collapse
"yes, you will" it is the answer if I need reset my phone ?
Before everything was working perfectly and now...
RaR System said:
"yes, you will" it is the answer if I need reset my phone ?
Before everything was working perfectly and now...
Click to expand...
Click to collapse
Just use this fastboot to install any custom recovery you prefer. Dont let your cell phone reboot into the OS or the custom recovery you installed will be replaced by the stock one!
RMarques said:
Just use this fastboot to install any custom recovery you prefer. Dont let your cell phone reboot into the OS or the custom recovery you installed will be replaced by the stock one!
Click to expand...
Click to collapse
Alright. I tryed this now, but my battery is low and ocurred an error because this... I have much luck...
Did you said about don't let my cell phone reboot, but ... How will I use him then?
I can do it ? fastboot erase recovery .... fastboot flash recovery cwm......img
Finally I got and installed TWRP. Thank you so much !
Fomaççy
RaR System said:
Alright. I tryed this now, but my battery is low and ocurred an error because this... I have much luck...
Did you said about don't let my cell phone reboot, but ... How will I use him then?
I can do it ? fastboot erase recovery .... fastboot flash recovery cwm......img
Finally I got and installed TWRP. Thank you so much !
Fomaççy
Click to expand...
Click to collapse
Gr8 stuff man...itd be nice if you click that "Thanks" button at the bottom right corner though!
HI I NEED YOUR HELP PLEASE : I HAVE ASUS PADFONE 2 suddenly WHEN I WAS SEARCHING ON GOOGLE ITS SHOW ME ( unfortunately google app has stopped ) AND STOCK THERE SO I DID RESET AFTER THAT THE PHONE ITS STOCK ON BOOTING UP ASUS LOGO AND AFTER 15 MINT ITS PASS THE BOOT LOGO AND ITS SHOW ME ON THE TOP ( ENCRYPTION UNSUCCESSFUL ) AND ON THE BOTTOM ( RESET PHONE ) BUT WHEN I HIT ON RESET PHONE IT DOES NOT DOING ANYTHING THE PHONE ITS ( UNROOTED ) AND IT WAS RUNNING ANDROID JELLY JEAN ( 4.1) AND I CAN GET INTO STOCK RECOVERY AND I DID WIPE DATA/ FACTORY RESET AND WIPE CACHE PARTITION BUT STILL STOCK ON BOOT LOGO AND NOT BOOTING NORMALLY AFTER I USED ( ADB BOOT LOADER ) AND TRIED TO FLASH A NEW FIRMWARE BY USING ( CWM RECOVERY ) I DIDNT FLASH THE CWM RECOVERY JUST USED THE IMG RECOVERY TO FLASH THE FIRMWARE ( INSTALL ZIP FROM SIDELOAD ) AND I SENT THE FIRMWARE TO MY PHONE BUT THE CWM RECOVERY COULDN'T FLASH IT ( UNSUCCESSFUL ) BECAUSE CWM RECOVERY ITS GAVE ME EVERY TIME ( E: CANT MOUNT ) ANYTHING I DID WITH CWM RECOVERY IT DOES NOT WORK SO I NEED YOUR HELP GUYS PLEASE ANYBODY CAN HELP ME WITH THAT I WILL BE APPRECIATED AND THANK YOU PLEASE HELP NOTE : I DONT KNOW WHAT IS THE BUILD NUMBER ON MY PHONE BUT I BOUGHT IT FROM TAIWAN .... HEY GUYS CHECK THE PICS PLEASE WHICH I POSTED AND THANKS
What for a ROM and CWM Version have you using?
CWM6.0.2.9 goes not for the most ROMs! You must need CWM6.0.4.4 or higher, or TWRP-Recovery for Padfone 2!
Perhabs your Device can reactivatet by a new Firmware-Flash with CWM6.0.4.4 or TWRP!
Thank you so much for your replies
roselanguste said:
What for a ROM and CWM Version have you using?
CWM6.0.2.9 goes not for the most ROMs! You must need CWM6.0.4.4 or higher, or TWRP-Recovery for Padfone 2!
Perhabs your Device can reactivatet by a new Firmware-Flash with CWM6.0.4.4 or TWRP!
Click to expand...
Click to collapse
YES I WAS USED CWM:6.0.2.9 I TRIED OVER 20 TIMES WITHOUT ANY SUCCEED (UNSUCCESSFUL) AS SHOWN IN THE PICTURES WHICH I POSTED ALREADY I TRIED ALL THESE ROMS : TW_A68-11.8.4.12-0-ota-user.zip ,TW_A68-11.8.4.6-0-ota-user.zip,WW_A68-11.8.4.23-0-ota-user.zip,CHT_A68-11.8.3.3-0-ota-user.zip,CN_A68-10.4.17.7-0-ota-user.zip,HK_A68-10.4.17.7-0-ota-user.zip,TW_A68-11.8.4.23-0-ota-user.zip ,,, I TRIED ALL THESE ROMS BECAUSE I DONT KNOW WHAT IT WAS MY ( BUILD NUMBER ) I CANT REMEMBER I JUST KNOW IT WAS JELLY BEAN 4.1 AND MY PADFONE 2 MODEL A68 IT WAS NOT ROOTED IT HAS STUCK FIRMWARE AND HAS ( LOCKED BOOTLOADER ) AND I TRIED TOO : adb push firmware.zip /data/media for example :adb push TW_A68-11.8.4.23-0-ota-user.zip /data/media and i pushed already to my external storage because there is no memory card on this phone (sdcard) using the stock recovery and when i tried to install the update from the /data/media it shows : install update and after 15 mint it gave me installation aborted and i wanna tell you something else the CWM RECOVERY WHEN I USED IT I DIDNT FLASH IT I JUST BOOT LIKE TESTED :fastboot boot recover.img because i dont know if i can flash it or not because my phone its ( not rooted ) please i need your help and thank you so much and if you need more information just let me know because maybe i forgot something just let me know and thanks
false national rom!
I think you have Flash the fals national Rom! TW = Taiwan-ROM, CHT = China-ROM, WW = Worldwide-English, and so on! Thats named SKU Version of the ROM! When your padfone from Europa or USA than you need a WW or WWE ROM! It gives a thread on XDA for flashing other,false,back SKU on Padfones! Search that thread, there a tuturials for Changing or Flash back SKUs! Your device need a Flash back to his original SKU-Version of your ROM!
And for CWM your padfone must be unlocked! But thats simple! On Asus Homepage search your device, and than you can Download a Unlock-APK! Download and install thies apk on your padfone, and start it, than your bootloader is unlocked! And after that, you can install CWM or TWRP on several ways!
roselanguste said:
I think you have Flash the fals national Rom! TW = Taiwan-ROM, CHT = China-ROM, WW = Worldwide-English, and so on! Thats named SKU Version of the ROM! When your padfone from Europa or USA than you need a WW or WWE ROM! It gives a thread on XDA for flashing other,false,back SKU on Padfones! Search that thread, there a tuturials for Changing or Flash back SKUs! Your device need a Flash back to his original SKU-Version of your ROM!
And for CWM your padfone must be unlocked! But thats simple! On Asus Homepage search your device, and than you can Download a Unlock-APK! Download and install thies apk on your padfone, and start it, than your bootloader is unlocked! And after that, you can install CWM or TWRP on several ways!
Click to expand...
Click to collapse
i dont know what is the fals natinoal rom ? and i bought my phone from taiwan ? and i dont know what is my build version i cant remember ? and how i can unlock the bootloader and my phone its not booting up normally ? can you tell me what i have to do please step by step and thank you so much
Build-Number is not important!
May be i can help you! Can you start the device in CWM-Mode? Can you go in CWM? In case that you can, load a TW-ROM (TW=Taiwan) via ADB-Sideload over CWM to your device! Than the device should install the original TW-ROM automaticaly!
In case that CWM not Functional, try to turn off the device, wait 30-seconds, than hold the ``+`` (Plus) button on the side of the device, and turn on the device where you hold the ``+`` (Plus) button permanently! Yet should come the ASUS-Logo and in the Top of the Display should stand ``Fastboot-Mode``! Can you please try that, and say me what the device do!?
roselanguste said:
Build-Number is not important!
May be i can help you! Can you start the device in CWM-Mode? Can you go in CWM? In case that you can, load a TW-ROM (TW=Taiwan) via ADB-Sideload over CWM to your device! Than the device should install the original TW-ROM automaticaly!
In case that CWM not Functional, try to turn off the device, wait 30-seconds, than hold the ``+`` (Plus) button on the side of the device, and turn on the device where you hold the ``+`` (Plus) button permanently! Yet should come the ASUS-Logo and in the Top of the Display should stand ``Fastboot-Mode``! Can you please try that, and say me what the device do!?
Click to expand...
Click to collapse
I TRIED ALL THE TW : ROMS WHICH I SENT IT TO YOU ALREADY ABOVE AND I DOWNLOAD THESE ROMS FROM ASUS WEBSITE FIRMWARES ,, AND I SENT THE ROMS USING THE SIDELOAD TO MY PHONE AND IM NOT FLASHING THE CWM ON MY PHONE BECUSE MY PHONE ITS NOT ROOTED AND THE BOOTLOADER ITS LOCKED I JUST LET CWM TO BOOT ON MY PHONE NOT FLASH IT AND WHEN I TRIED TO INSTALL THE UPDATE USING CWM ITS GAVE ME ( INSTALLATION ABORTED ) STATUS 7 ERROR ,,,, check the pics please and thanks
Ok! I think it is the old CWM6.0.2.9 problem, this version of CWM has problems with flashing ROMs! BUT, there is one ROM on XDA for Padfone2 that must flash with CWM6.0.2.9! It is Tari's Padfone2 Custom ROM+Kernel! It is easy to find on XDA, and this ROM will flashing over Sideload with CWM6.0.2.9! Search on XDA for Tari's Padfone2 ROM, there you can Download the files, and there is also a step by step tuturial, follow that, and try!
And have you tested that Fastboot goes?
roselanguste said:
Ok! I think it is the old CWM6.0.2.9 problem, this version of CWM has problems with flashing ROMs! BUT, there is one ROM on XDA for Padfone2 that must flash with CWM6.0.2.9! It is Tari's Padfone2 Custom ROM+Kernel! It is easy to find on XDA, and this ROM will flashing over Sideload with CWM6.0.2.9! Search on XDA for Tari's Padfone2 ROM, there you can Download the files, and there is also a step by step tuturial, follow that, and try!
And have you tested that Fastboot goes?
Click to expand...
Click to collapse
yes i used cwm 6.0.29 ,, ok but you said taris padfone 2 rom its custom rom how am gonna flash it and my phone its not rooted and the bootloader on my phone its locked
wasim74 said:
yes i used cwm 6.0.29 ,, ok but you said taris padfone 2 rom its custom rom how am gonna flash it and my phone its not rooted and the bootloader on my phone its locked
Click to expand...
Click to collapse
yes i tried fastboot and sideload i have no problem with that i can send the roms to my phone but the problem my phone cant flash it ?
OK! But i think your Bootloader is Open, than otherwise, you cant go in Fastbootmode or CWM!? Fastbootmode and CWM (Recovery), that is the Bootloader!
You can go in CWM, then you can make the flash-prozedure of all ROMs! (Stock and Custom)!
Try Taris ROM! Go in CWM, make Wipe Data/Factory Reset, make Wipe Cache, and Sideload Taris ROM!
Did that not work, try CWM6.0.4.4 or TWRP-Recovery to Flash Original ASUS-TW-Firmware!
And when you can start CWM with - fastboot boot recovery.img - , than normaly you can also Flash it permanently with - fastboot flash recovery recovery.img - !
roselanguste said:
OK! But i think your Bootloader is Open, than otherwise, you cant go in Fastbootmode or CWM!? Fastbootmode and CWM (Recovery), that is the Bootloader!
You can go in CWM, then you can make the flash-prozedure of all ROMs! (Stock and Custom)!
Try Taris ROM! Go in CWM, make Wipe Data/Factory Reset, make Wipe Cache, and Sideload Taris ROM!
Did that not work, try CWM6.0.4.4 or TWRP-Recovery to Flash Original ASUS-TW-Firmware!
And when you can start CWM with - fastboot boot recovery.img - , than normaly you can also Flash it permanently with - fastboot flash recovery recovery.img - !
Click to expand...
Click to collapse
but i didnt unlock the bootloader on my phone how come its unlock i dont know ? so you mean i have to flash the cwm on my phone after that send one of the TW-ROMS to my phone and flash it too ,,, ok i will try that but from where i can get the cwm6.0.4.4 for padfone2 let me know please and thank you so much because you are help me with that ?
wasim74 said:
but i didnt unlock the bootloader on my phone how come its unlock i dont know ? so you mean i have to flash the cwm on my phone after that send one of the TW-ROMS to my phone and flash it too ,,, ok i will try that but from where i can get the cwm6.0.4.4 for padfone2 let me know please and thank you so much because you are help me with that ?
Click to expand...
Click to collapse
oh ,, just to let you know when i used the cwm 6.0.2.9 i cant do wipe -factory reset or wipe cashe its gave me e: cnt mount but on stock recovery i can do wipe cashe and factory reset but it take too long to do that
There is a other custom ROM for Padfone2 from Sissidroid! Search on XDA for - Guerilla ROM - it is easy to find, and in the thread to this ROM there is a link for Download CWM6.0.4.4. Because CWM6.0.4.4 is needed to Flash Guerilla-ROM from Sissidroid!
In Google search - TWRP for Padfone2 - then you find a TWRP-Site, from there you can Download TWRP-Recoverys for Padfone2. Take the Version 2.6.3.0 of TWRP, not other. The other Versions dont go! TWRP is a Recovery like CWM, but TWRP has a Touch-Interface, and the funtionality is often better than CWM!
roselanguste said:
There is a other custom ROM for Padfone2 from Sissidroid! Search on XDA for - Guerilla ROM - it is easy to find, and in the thread to this ROM there is a link for Download CWM6.0.4.4. Because CWM6.0.4.4 is needed to Flash Guerilla-ROM from Sissidroid!
In Google search - TWRP for Padfone2 - then you find a TWRP-Site, from there you can Download TWRP-Recoverys for Padfone2. Take the Version 2.6.3.0 of TWRP, not other. The other Versions dont go! TWRP is a Recovery like CWM, but TWRP has a Touch-Interface, and the funtionality is often better than CWM!
Click to expand...
Click to collapse
ok am gonna look for cwm6.0.44 and for twrp 2.6.3.0 and flash one of them on my phone not just like how i was did i mean just boot it and after that flash one of the roms which you told me about them already but just to remind you my phone its not rooted is that fine ... let me know and thank you so much my friend
The Root is here not so important. In most cases a ROM-Flash Unrooting the device! Every Time when i Flash a ROM, the device is after the Flash unrooted, and i must it Root again! Root is important for a Running System! And it gives a way to Root the Device over ADB/Fastboot, but i dont know how. But i have never Need a Root for ROM-Flash!
wasim74 said:
ok am gonna look for cwm6.0.44 and for twrp 2.6.3.0 and flash one of them on my phone not just like how i was did i mean just boot it and after that flash one of the roms which you told me about them already but just to remind you my phone its not rooted is that fine ... let me know and thank you so much my friend
Click to expand...
Click to collapse
sorry my friend : i mean my padfone 2 its not have root its ( unrooted ) so can i flash the custom recovery cwm or twrp on my phone and flash custom roms without having root on my padfone 2 ,,,,,, can i do that without root or i cant ? and thanks
Yes, you can do that without root! Important for that is only you can go in Fastbootmode and CWM/TWRP!
roselanguste said:
Yes, you can do that without root! Important for that is only you can go in Fastbootmode and CWM/TWRP!
Click to expand...
Click to collapse
hi my friend : i have problem with flashing the recovery { fastboot flash recovery recovery.img } i dont know why and i tried to just boot the recovery img for test : fastboot boot boot recovery.img i tried it with twrp and its show me just the picture TEAM WIN BUT ITS NOT FUNCTIONAL CHECK THE PICS PLEASE AND LET ME KNOW WHAT IS THE PROBLEM AND THANKS
On the pics i see, that recovery-flash was failure! In your CMD-pic, adb gives you a writing-failure! That can happen, when you try it ones! Try it again, and also with cwm! What for twrp version have you try? By right flashing, cmd gives you a sending recovery ok, and writing recovery ok! You have sending ok, but writing a failure!?
And what for adb/fastboot binarys use you?
P.s.: I have a important question, as you tryed to flash Asus Firmwares, have you unzip the Firmware before flashing? Or just Download and Flash how it is!
Hay guys this is the first TWRP for blackberry
It's only test on blackberry keyone none bootloader version
It's already can use keyboard touch and none bug
For some reason i cant open source my code,im sorry about it
How to flash it?
1.make your keyone into fastboot mode
2.use fastboot.exe to flash twrp
3.fastboot flash recovery twrp-3.2.1-0-keyone.img
maybe someone don't think this is real,so i provide a video
TWRP ON BLACKBERRY KEYONE
DOWNLOAD LINK
The Google Drive download link you posted doesn't work. I don't have permission to download the file.
There is no access to download TWRP from the specified link.
Good to see it! But you need to change google drive permission.
Dayongdo said:
Good to see it! But you need to change google drive permission.
Click to expand...
Click to collapse
try this link https://drive.google.com/file/d/164QUwX0UH8s-A8FyT8Mbc3in7QroO_Ss/view?usp=sharing
Dayongdo said:
Good to see it! But you need to change google drive permission.
Click to expand...
Click to collapse
RipenedCoconut said:
The Google Drive download link you posted doesn't work. I don't have permission to download the file.
Click to expand...
Click to collapse
komir112 said:
There is no access to download TWRP from the specified link.
Click to expand...
Click to collapse
komir112 said:
There is no access to download TWRP from the specified link.
Click to expand...
Click to collapse
try this link https://drive.google.com/file/d/164QUwX0UH8s-A8FyT8Mbc3in7QroO_Ss/view?usp=sharing
SKDushow said:
Hay guys this is the first TWRP for blackberry
It's only test on blackberry keyone none bootloader version
It's already can use keyboard touch and none bug
For some reason i cant open source my code,im sorry about it
How to flash it?
1.make your keyone into fastboot mode
2.use fastboot.exe to flash twrp
3.fastboot flash recovery twrp-3.2.1-0-keyone.img
maybe someone don't think this is real,so i provide a video
TWRP ON BLACKBERRY KEYONE
DOWNLOAD LINK
Click to expand...
Click to collapse
Is it possible to install custom rom if you already install TWRP?
st4rt2th1nk said:
Is it possible to install custom rom if you already install TWRP?
Click to expand...
Click to collapse
I can install MIUI9 port rom by myself
SKDushow said:
I can install MIUI9 port rom by myself
Click to expand...
Click to collapse
Wow, that's good... is there any bugs?
SKDushow said:
I can install MIUI9 port rom by myself
Click to expand...
Click to collapse
Do you try to install magisk via TWRP?
komir112 said:
Do you try to install magisk via TWRP?
Click to expand...
Click to collapse
magisk is already works good
st4rt2th1nk said:
Wow, that's good... is there any bugs?
Click to expand...
Click to collapse
it's still in porting
Can you port for BBB100-7 Indonesia?
Rom like pixel experience or another stock android
If i install TWRP on my device, how to enter recovery mode? As i know Keyone has only fastboot mode, so if we reboot device (power button + volume up / volume down) we get fastboot, not recovery.
SKDushow said:
Hay guys this is the first TWRP for blackberry
Click to expand...
Click to collapse
hey dude! u are cool if u made this thing! but there are too many questions about this.
1) how i can boot this recovery?
2) does it persist after reboot?
3) are there any viruses, trojans or other destructive behavior in this recovery?
4) how is it possible to work? as far as i know it needs an unlocked bootloader to boot. Magisk should patch the kernel, but after the patch its signature will change (i think the kernel have sign too), will it really not affect the boot?
5) how does recovery bypass flash encryption? maybe recovery turns off encryption?
6) after installing the recovery, the system is not damaged? are all system and applications, their data, photos saved?
komir112 said:
If i install TWRP on my device, how to enter recovery mode? As i know Keyone has only fastboot mode, so if we reboot device (power button + volume up / volume down) we get fastboot, not recovery.
Click to expand...
Click to collapse
use adb
-=Raider=- said:
hey dude! u are cool if u made this thing! but there are too many questions about this.
1) how i can boot this recovery?
2) does it persist after reboot?
3) are there any viruses, trojans or other destructive behavior in this recovery?
4) how is it possible to work? as far as i know it needs an unlocked bootloader to boot. Magisk should patch the kernel, but after the patch its signature will change (i think the kernel have sign too), will it really not affect the boot?
5) how does recovery bypass flash encryption? maybe recovery turns off encryption?
6) after installing the recovery, the system is not damaged? are all system and applications, their data, photos saved?
Click to expand...
Click to collapse
u can use adb enter recovery after flash,I use development device system,that doesn't have boot sign check,after flash the system still works good,if you just want root,u can try supersu or addon su(by mokee)
This is epic! I always loved the device. I hope there is some kind of development soon!
st4rt2th1nk said:
Can you port for BBB100-7 Indonesia?
Rom like pixel experience or another stock android
Click to expand...
Click to collapse
Hope to see this too, since i'm BB Merah Putih user too
SKDushow said:
Hay guys this is the first TWRP for blackberry
It's only test on blackberry keyone none bootloader version
It's already can use keyboard touch and none bug
For some reason i cant open source my code,im sorry about it
How to flash it?
1.make your keyone into fastboot mode
2.use fastboot.exe to flash twrp
3.fastboot flash recovery twrp-3.2.1-0-keyone.img
maybe someone don't think this is real,so i provide a video
TWRP ON BLACKBERRY KEYONE
DOWNLOAD LINK
Click to expand...
Click to collapse
Hey man, 1st of all - thank you so much for all the hard work you've done
I tried doing as you've said
That's what I get:
fastboot devices
1164180706 fastboot
fastboot flash recovery twrp-3.2.1-0-keyone.img
Sending 'recovery' (25532 KB) FAILED (remote: 'authboot command permission denied')
fastboot: error: Command failed
Some kind of permission error
I really need to get root access on my BlackBerry keyone - I hope I can make it with Magisk after installing TWRP
any suggestions?