Related
Can anybody direct my to a good thread on how to use jrummy's boot animation app? Or a good thread on changing boot animations period? Thanks everyone.
Changing boot animations is easy
1) Get a root explorer app (es file explorer is free and you can enable root under settings)
2) download boot animation
3) paste it in /system/media using the root explorer
4) make sure the name matches the previous one
5) make sure the permissions are rw, r, r
6) reboot and enjoy
Sent from my Holiday using Tapatalk 2
Thanks much. So there isn't an app that will do this?
Be Real or Don't Be
mg2195 said:
Changing boot animations is easy
1) Get a root explorer app (es file explorer is free and you can enable root under settings)
2) download boot animation
3) paste it in /system/media using the root explorer
4) make sure the name matches the previous one
5) make sure the permissions are rw, r, r
6) reboot and enjoy
Sent from my Holiday using Tapatalk 2
Click to expand...
Click to collapse
So in step 4 do I make sure it has the exact same name as the previous or just the same suffix? And how do I change permissions on it?
Be Real or Don't Be
treyserits said:
So in step 4 do I make sure it has the exact same name as the previous or just the same suffix? And how do I change permissions on it?
Be Real or Don't Be
Click to expand...
Click to collapse
Exact same name
Sent from my SGH-I997 using xda premium
---------- Post added at 07:36 AM ---------- Previous post was at 07:35 AM ----------
treyserits said:
So in step 4 do I make sure it has the exact same name as the previous or just the same suffix? And how do I change permissions on it?
Be Real or Don't Be
Click to expand...
Click to collapse
Generally by pressing and holding on the file and selecting permissions but it depends on what app your using
Sent from my SGH-I997 using xda premium
Any special permissions needed?
Be Real or Don't Be
treyserits said:
Any special permissions needed?
Be Real or Don't Be
Click to expand...
Click to collapse
trey...you have to read the advice given.
read mg's instruction again.
review this:
http://forum.xda-developers.com/showthread.php?t=1437548
there is a lot of info there...may need to read it several times
I've read and applied all the steps as written but still am just getting the Samsung then nothing where the at&t bootanim used to be..
Be Real or Don't Be
Permissions are typically RW,R,R aka Read Write, Read, Read
most ROMs have the animation named as bootanimation.zip, but some are sanim.zip
Also...many people have difficulty changing animations on rooted stock...I suspect it has something to do with the kernel
Lastly...idk about any apps that can change the boot animation for you...but they probably do exist...
Sent from my SGH-I997 using Tapatalk 2
Mg.. You are correct. The stock kernel does not run the service that plays these boot animations.
Sent from my SAMSUNG-SGH-I997 using xda premium
http://forum.xda-developers.com/showthread.php?t=1702026
this guy loves his boot animations.
check out his tool kit
you can prolly overwrite one of his boot ani with your and just flash yours.
You guys are once again life savers. Appreciate all the help.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
Disclaimer: I typically modify to meet my own needs, on my own time, for my own device. This means that it might not be a mod meant for everyone, nor has it been thoroughly tested by anyone but myself. Use at your own risk.
Description: Modifies framework-res.apk in /system/framework to disable the loading of CarrierIQ on start-up as well as shrink the margins on the navigation bar for a little more screen real estate. This has only been tested and used on Stock AT&T LG G2 4.4 KitKat.
Link: https://db.tt/IoEgdIsr
Instructions: Back-up your current framework-res.apk in /system/framework then replace it with this one.
Notes:
CarrierIQ no longer shows 7 running processes via System Tuner on boot. To me, this indicates it is no longer being loaded. Otherwise, if you want, you can use System Tuner -> System -> Android System [Details] -> uncheck each of 7 CarrierIQ processes to do it manually.
This is a simple dimens.xml modification. Nothing major.
After replacing file with root explorer I went into a boot loop... Now I am afraid that I am going to have to completely restore my phone.
I know this is pretty straight forward but your file didn't work.
need to know if anyone was successful with this mod yet. do not want to go into a bootloop or force closes.
Also waiting for others to confirm this working first.
If only Xposed were working.
gonna flag this because it just crashes phones..... i just did it and i really dont think its funny.
---------- Post added at 12:07 AM ---------- Previous post was at 12:04 AM ----------
Do not do it a full restore i needed after applying this so called mod>
---------- Post added at 12:12 AM ---------- Previous post was at 12:07 AM ----------
i am actually kind of mad that this messed up my phone and took multiple tries to get into download mode. now i have to redo everything.
This work perfect for me, here how i did it
First backup my framework apk
second i copied the mod framework apk to system folder
then i set 644 permission for it
finally i move and replace it to framework folder
restart rightaway and it work
thanks OP for the mod file
btw maybe you should shrink the navbar a little less, it way too thin in my opion
podagee said:
gonna flag this because it just crashes phones..... i just did it and i really dont think its funny.
---------- Post added at 12:07 AM ---------- Previous post was at 12:04 AM ----------
Do not do it a full restore i needed after applying this so called mod>
---------- Post added at 12:12 AM ---------- Previous post was at 12:07 AM ----------
i am actually kind of mad that this messed up my phone and took multiple tries to get into download mode. now i have to redo everything.
Click to expand...
Click to collapse
This works great. Use root explorer and set permissions. Don't forget to make a nandroid backup if you can.
Download the apk from OP, then:
1. I copied over the framework after renaming it. (I just added a 2 at the end)
2. Then I set permissions (I just checked all the boxes... why not). At this point it would be a good idea to backup your original framework apk in case you want to restore.
3. Then I named it properly and over wrote the original (removed the 2)
4. I rebooted.
I somewhat disagree with the post above, I wouldn't mind it being a little smaller.
I am running this on the D800 running the androiduser's power user D802 base ROM.
@burningembers can you make one that will get rid of the volume and brightness sliders? Thanks!
Sent from my LG-D800 using XDA Premium 4 mobile app
joshuadjohnson22 said:
This works great. Use root explorer and set permissions. Don't forget to make a nandroid backup if you can.
Download the apk from OP, then:
1. I copied over the framework after renaming it. (I just added a 2 at the end)
2. Then I set permissions (I just checked all the boxes... why not). At this point it would be a good idea to backup your original framework apk in case you want to restore.
3. Then I named it properly and over wrote the original (removed the 2)
4. I rebooted.
I somewhat disagree with the post above, I wouldn't mind it being a little smaller.
I am running this on the D800 running the androiduser's power user D802 base ROM.
@burningembers can you make one that will get rid of the volume and brightness sliders? Thanks!
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
the Navbar is fine in portrait but if you put the phone in landscape and you'll see the icon on it doesnt fix, it still ok but look amateur
Thanks heatshiver the nav bar smaller is nice. I'm still detecting Carrier IQ though .. Doing it manually with android tuner I would disable all of the items under android system? Thanks again bud
Edit: you probably already have this info but just in case or anyone else wanting to take a crack at totally disabling it (if possible)
Binaries:
/system/lib/libiq_client.so
/system/lib/libiq_service.so
*** Suspicious classes ***
com.carrieriq.iqagent.service.receivers.BootCompletedReceiver
*** Running processes ***
system 1531 269 537876 40732 ffffffff 00000000 S diagandroid.iqd
Sent from my LG-D800 using Tapatalk
thanks for this mod. I'll try this tonight after I flash the rom. I wouldn't mind a smaller nav bar too if you ever think of making another one.
This is a great mod, but remember that you cannot FULLY remove Carrier IQ from the ATT ROM. You can disable the services and prevent them from running which is what this does, and maybe it stops it all and maybe it doesnt IDK. But there is carrier IQ embedded into the UI code, the keyboard code, the messaging app code, etc. The only way to truly not have any Carrier IQ on your phone is to not run an ATT base ROM.
Thats weird cause i moved the framework mod into system/framework and set the permissions to rw--r--r and my screen started force closing and when i rebooted it stayed on the lg logo. Will try again later tonight
If you use adb you could push then reboot or if you're on a rom that has recovery you could create a zip.
Do you need to be rooted for this?
Sent from my LG-D800 using XDA Premium 4 mobile app
jab74101 said:
Do you need to be rooted for this?
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes.
Sent from my LG-V500 using XDA Premium 4 mobile app
Okay i dont think this can be applied to the d80020c because the people here are on different roms. Poweruser.tmo rom, and i seen another mention flashing a rom then doing this. Has anyone tried it on stock rooted kitkat and been successful cause im not
craashed my gotdamn phone again.
---------- Post added at 09:46 PM ---------- Previous post was at 08:50 PM ----------
joshuadjohnson22 said:
This works great. Use root explorer and set permissions. Don't forget to make a nandroid backup if you can.
Download the apk from OP, then:
1. I copied over the framework after renaming it. (I just added a 2 at the end)
2. Then I set permissions (I just checked all the boxes... why not). At this point it would be a good idea to backup your original framework apk in case you want to restore.
3. Then I named it properly and over wrote the original (removed the 2)
4. I rebooted.
I somewhat disagree with the post above, I wouldn't mind it being a little smaller.
I am running this on the D800 running the androiduser's power user D802 base ROM.
@burningembers can you make one that will get rid of the volume and brightness sliders? Thanks!
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
cant rename and overwrite if its in the same folder guy
---------- Post added at 09:51 PM ---------- Previous post was at 09:46 PM ----------
youbguys are full of it cause no matter what i do it crashes hard. the methods you guys are putting does not work......at all now stop it with this crap cause it DOES NOT WORK!!!!!
---------- Post added at 09:54 PM ---------- Previous post was at 09:51 PM ----------
and the guy who made this says in the OP that its for stock kitkat......DOES NOT WORK BUDDY!!! tried 4 times with different file managers and the same thing...HARD CRASHES...
podagee said:
craashed my gotdamn phone again.
---------- Post added at 09:46 PM ---------- Previous post was at 08:50 PM ----------
cant rename and overwrite if its in the same folder guy
---------- Post added at 09:51 PM ---------- Previous post was at 09:46 PM ----------
youbguys are full of it cause no matter what i do it crashes hard. the methods you guys are putting does not work......at all now stop it with this crap cause it DOES NOT WORK!!!!!
---------- Post added at 09:54 PM ---------- Previous post was at 09:51 PM ----------
and the guy who made this says in the OP that its for stock kitkat......DOES NOT WORK BUDDY!!! tried 4 times with different file managers and the same thing...HARD CRASHES...
Click to expand...
Click to collapse
It worked perfectly for me when I did it the way above. I also went back to the original framework using this method. I'm not sure what you are doing wrong but at this point just use xposed (the Chinese leak found in the general section) and the G2 xposed module. That's what I am doing and I have a small nav bar.
Don't be mad at us, we were just reporting something we did that worked. If a few of us got it working and you did the problem is somewhere on your end not ours. So don't blame us, we gain nothing from lying. It may just be the ROM you are using
EDIT: it appears they closed that Chinese xposed thread for some reason. You may want to check out why but here is the link to the apk http://pan.baidu.com/s/1mgFNFc8 I haven't had any issues but it may cause issues with the lg launcher. Use this at you own risk... Good luck
Sent from my LG-D800 using Tapatalk
joshuadjohnson22 said:
It worked perfectly for me when I did it the way above. I also went back to the original framework using this method. I'm not sure what you are doing wrong but at this point just use xposed (the Chinese leak found in the general section) and the G2 xposed module. That's what I am doing and I have a small nav bar.
Don't be mad at us, we were just reporting something we did that worked. If a few of us got it working and you did the problem is somewhere on your end not ours. So don't blame us, we gain nothing from lying. It may just be the ROM you are using
EDIT: it appears they closed that Chinese xposed thread for some reason. You may want to check out why but here is the link to the apk http://pan.baidu.com/s/1mgFNFc8 I haven't had any issues but it may cause issues with the lg launcher. Use this at you own risk... Good luck
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I'm using the d80020c. I tried over and over what u guys are saying to do and nothing works the op says stock Rom which is incorrect I take it u guys are on custom roms which make no sense cause they mostly have is remove
---------- Post added at 12:29 AM ---------- Previous post was at 12:11 AM ----------
joshuadjohnson22 said:
It worked perfectly for me when I did it the way above. I also went back to the original framework using this method. I'm not sure what you are doing wrong but at this point just use xposed (the Chinese leak found in the general section) and the G2 xposed module. That's what I am doing and I have a small nav bar.
Don't be mad at us, we were just reporting something we did that worked. If a few of us got it working and you did the problem is somewhere on your end not ours. So don't blame us, we gain nothing from lying. It may just be the ROM you are using
EDIT: it appears they closed that Chinese xposed thread for some reason. You may want to check out why but here is the link to the apk http://pan.baidu.com/s/1mgFNFc8 I haven't had any issues but it may cause issues with the lg launcher. Use this at you own risk... Good luck
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
thanks for the link xposed installed. thank you.
joshuadjohnson22 said:
It worked perfectly for me when I did it the way above. I also went back to the original framework using this method. I'm not sure what you are doing wrong but at this point just use xposed (the Chinese leak found in the general section) and the G2 xposed module. That's what I am doing and I have a small nav bar.
Don't be mad at us, we were just reporting something we did that worked. If a few of us got it working and you did the problem is somewhere on your end not ours. So don't blame us, we gain nothing from lying. It may just be the ROM you are using
EDIT: it appears they closed that Chinese xposed thread for some reason. You may want to check out why but here is the link to the apk http://pan.baidu.com/s/1mgFNFc8 I haven't had any issues but it may cause issues with the lg launcher. Use this at you own risk... Good luck
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
The reason it was closed was because they were distributing work which was not there's without asking the creator
Sent from my LG-D800 using XDA Premium 4 mobile app
Hi
I am creating a system log using Tasker. Through the 'Event' context , i can detect when a package is installed/uninstalled or updated. However, i cannt see any variable that can retrieve the name of the package so modified. is there any way to retrieve the information?
i am having Rooted Nexus 5 runnning stock 4.4.2.
You need to create the task and variable to assign to the profile.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Using which variable? I don't think there is a tasker variable that retrieves recently changed package information. there is an Event Context that detects change. But I want to get the name of the package
[deleted]
---------- Post added at 01:32 PM ---------- Previous post was at 01:29 PM ----------
[/COLOR]I hate when emojis get imbedded in stuff. I shall export this as a link instead…
https://taskernet.com/shares/?user=...e9wezclBmPWQUSw==&id=Profile:Get+New+App+Name
Must be rooted. Edit build.prop persist.splitwindow .support_all
open system folder
-scroll to build.prop (past folders)
-copy/make backup
-open as text in text editor
-scroll to persist.splitwindow.support_all
-change value to true
- save and reboot
Depending on your app/tool you may need to copy build.prop somewhere, edit and replace old one in system with edited version.
Enjoy.
Sent from my LG-D850 using XDA Premium 4 mobile app
mjgspr95 said:
Must be rooted. Edit build.prop persist.splitview.support_all, change value to true and reboot. If someone already discovered this I couldn't find it...
Enjoy.
Sent from my LG-D850 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Mine says splitwindow but it works!
Thanks!
That's correct... My memory is in a tequila bottle.
Sent from my LG-D850 using XDA Premium 4 mobile app
rooted but can't find build.prop
I'm rooted but having trouble finding build.prop to edit so I can have all apps on split screen. I just came over from HTC my and that was a difficult phone to root so I feel I can do it on this OS but I'm just asking if you can give me a step by step walk through. Any help would be greatly appreciated and thanked.
mjgspr95 said:
Must be rooted. Edit build.prop persist.splitwindow .support_all, change value to true and reboot. If someone already discovered this I couldn't find it...
Enjoy.
Sent from my LG-D850 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You need a good file manager with system access or an app or an app to edit build.prop. I use rom toolbox pro. Root Explorer is a good option I've used before too.
Sent from my LG-D850 using XDA Premium 4 mobile app
I tried root Explorer, but the editor says that the file is too big and week not save changes...
Sent from my Note3 Rocking DynamicKat or my G3
thanks but still having problems
I downloaded the app you suggested but I am still having trouble finding the build prop. I'm not sure where I am too look. Thanks for the help thus far.
QUOTE=mjgspr95;54316205]You need a good file manager with system access or an app or an app to edit build.prop. I use rom toolbox pro. Root Explorer is a good option I've used before too.
Sent from my LG-D850 using XDA Premium 4 mobile app[/QUOTE]
-open system folder
-scroll to build.prop (past folders)
-copy/make backup
-open as text in text editor
-scroll to persist.splitwindow.support_all
-change value to true
- save and reboot
Depending on your app/tool you may need to copy build.prop somewhere, edit and replace old one in system with edited version.
Sent from my LG-D850 using XDA Premium 4 mobile app
Working great, thanks! What kind of order are the apps in? Mine seems pretty random.
Random also
Sent from my LG-D850 using XDA Premium 4 mobile app
I didn't make this, but it works. Props to XabdullahX for making this.
http://forum.xda-developers.com/lg-g3/themes-apps/app-multiwindow-mod-t2819978
I dont have persist.splitwindow in my build prop.. What should i do
Sent from my LG-D850 using XDA Free mobile app
mjgspr95 said:
-open system folder
-scroll to build.prop (past folders)
-copy/make backup
-open as text in text editor
-scroll to persist.splitwindow.support_all
-change value to true
- save and reboot
Depending on your app/tool you may need to copy build.prop somewhere, edit and replace old one in system with edited version.
Sent from my LG-D850 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
mjgspr95 great info - Might want to edit the OP to show the procedure and possibly change the title to [GUIDE] How to enable all apps in SplitView just to make it easier to find for people and keep the forums organized - also I am pretty sure this should be in General. But thank you for the info - it worked great for me.
and for those who are looking for a file browser - might want to check out ROOT Explorer
blkghost22 said:
I dont have persist.splitwindow in my build prop.. What should i do
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
I bet you are trying to use Root Explorer to edit the file. Unfortunately the file size is too big and Root Explorer A) won't even show the entire file's contents and B) won't let you save the file even if the right commands were editable......
You have to find another alternative. Personally I pushed the file out of the phone, edited it on my computer, and pushed it back to the phone. It worked fine.
---------- Post added at 08:50 PM ---------- Previous post was at 08:48 PM ----------
neverends said:
and for those who are looking for a file browser - might want to check out ROOT Explorer
Click to expand...
Click to collapse
As much as I like (and also recommend) Root Explorer, it won't work with the build.prop file as it is too big for the Root Explorer text editor.
neverends said:
mjgspr95 great info - Might want to edit the OP to show the procedure and possibly change the title to [GUIDE] How to enable all apps in SplitView just to make it easier to find for people and keep the forums organized - also I am pretty sure this should be in General. But thank you for the info - it worked great for me.
and for those who are looking for a file browser - might want to check out ROOT Explorer
Click to expand...
Click to collapse
I use root explorer as well. I didn't realize that the text editor cant handle that large of a file... Anyway this is the way that I got around it on my Mac:
On Mac:
adb pull /system/build.prop .
vi build.prop
<Make changes>
adb push ./build.prop /mnt/sdcard/
On phone:
Remount /system RW in Root explorer
Rename /system/build.prop to /system/build.prop.bak
Move /sdcard/build.prop to /system/build.prop
Reboot
You could always just download build prop editor from the play store and it works and is easy.
Sent from my LG-D850 using Tapatalk
Edited the build.prop file. Ended up soft bricking my phone. Was able to reset but not fun.
This is an app that doesn't require mucking with build prop. Works well for me.
http://forum.xda-developers.com/showthread.php?t=2707310&page=6
Are this from my thread?? Credit??
spiderio said:
Are this from my thread?? Credit??
Click to expand...
Click to collapse
This thread is older than yours. (At least older than the one that I found.)
[Q&A] [ROM][KERNEL][XJ][AROMA] Seraphic Season 7 with Intuisy Kernel [4.1.2][Releas
Q&A for [ROM][KERNEL][XJ][AROMA] Seraphic Season 7 with Intuisy Kernel [4.1.2][Released]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][KERNEL][XJ][AROMA] Seraphic Season 7 with Intuisy Kernel [4.1.2][Released]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello. I have problem i add qemu.hw.mainkeys=1 to the build.prop and the button is still i cant delte it Can i use any applicattion to turn off that buttons?
how to remove Tab Bars?
sabuk2 said:
Hello. I have problem i add qemu.hw.mainkeys=1 to the build.prop and the button is still i cant delte it Can i use any applicattion to turn off that buttons?
Click to expand...
Click to collapse
After add line to end build.prop must save and delete build.prop.bak and reboot
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
Mujeeb64 said:
how to remove Tab Bars?
Click to expand...
Click to collapse
-search build.prop
-open with text editor
-add this line" qemu.hw.mainkeys=1 " to end build.prop
-after add save it
-delete build.prop.bak
-reboot
ENJOY
Hello! I add the line but i dont hve the bak file. Can you MAke an cmd command or in cwm flash to make it automattic?
I too got error with album when i slide from left to right i see on the task bar my images when i try to record it (screen recorder) that not is in the video.
kubiss017 said:
After add line to end build.prop must save and delete build.prop.bak and reboot
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
-search build.prop
-open with text editor
-add this line" qemu.hw.mainkeys=1 " to end build.prop
-after add save it
-delete build.prop.bak
-reboot
ENJOY
Click to expand...
Click to collapse
Fix this .
network data not work .
please help me .
i am newbie .
sabuk2 said:
Hello! I add the line but i dont hve the bak file. Can you MAke an cmd command or in cwm flash to make it automattic?
I too got error with album when i slide from left to right i see on the task bar my images when i try to record it (screen recorder) that not is in the video.
Click to expand...
Click to collapse
what specific file explorer are you using? make sure you saved the changes you made. in my case i used Root Explorer because im not successful in editing build.prop in ES file explorer despite granting it with root access. also make sure that the file has permission RW-R-R :good:
help me .
how to fix it ?
syazwi_xj said:
how to fix it ?
Click to expand...
Click to collapse
make sure you already created an access point specific to your network and choose it as default. i dont encounter such error. or you can try try reflash your rom to make sure
syazwi_xj said:
network data not work .
please help me .
i am newbie .
Click to expand...
Click to collapse
Yes, don't works you need create the 3G APN from your company
Sent from my ST26i using XDA Free mobile app
---------- Post added at 12:33 AM ---------- Previous post was at 12:32 AM ----------
How can i fix the continuous closes from walkman
Sent from my ST26i using XDA Free mobile app
why my font not change ?
in aroma installer , i choose stock font .
because i want use ifont ,
then , when i done set it in ifont ,
after reboot , anything not change . still stock font .
help me .
2000hardwell said:
Yes, don't works you need create the 3G APN from your company
Sent from my ST26i using XDA Free mobile app
---------- Post added at 12:33 AM ---------- Previous post was at 12:32 AM ----------
How can i fix the continuous closes from walkman
Sent from my ST26i using XDA Free mobile app
Click to expand...
Click to collapse
I also encountered FC in walkman at first install of this rom, i think that happened when i uninstalled some of the bloatwares, now i reinstall the rom and did not delete bloatwares now my walkman is working fine, i also would like to ask if you have radio after installing this rom, because i have no radio application installed and upon checking in systems/apps, radio.apk was there...
But is there a way to hide soft buttons?
They're useless on JLO so how to hide it?
PanPomarańczowy said:
They're useless on JLO so how to hide it?
Click to expand...
Click to collapse
kubiss017 said:
After add line to end build.prop must save and delete build.prop.bak and reboot
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
-search build.prop
-open with text editor
-add this line" qemu.hw.mainkeys=1 " to end build.prop
-after add save it
-delete build.prop.bak
-reboot
ENJOY
Click to expand...
Click to collapse
You Can Try This One
x7_ said:
You Can Try This One
Click to expand...
Click to collapse
It worked, thanks :good:
@SatrioDwiPrabowo Please fix your symbol on keyboard and timescape share background color, I can't see that symbol or text same with your backround colour.
Thanks before. Seraphic is best custom rom im used on xj.
Sent from my ST26i using XDA Free mobile app
Stuck Greenify Modul On Exposed
i add Greenify + donation package, And Alredy Install Framework On Exposed Installer and Actived modul Greenify.
But if i open Experiental Mode , Greenify always Need Actived Modul On Exposed.
Need Help Everyone
Hey guys SS6 download link is broken, can someone give me readytorun.apk? Thanks!
Acidde said:
Hey guys SS6 download link is broken, can someone give me readytorun.apk? Thanks!
Click to expand...
Click to collapse
I think SS6 discontinue, latest version is SS7 try search
Sent from my ST26i using XDA Premium 4 mobile app
x7_ said:
I think SS6 discontinue, latest version is SS7 try search
Sent from my ST26i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes BTW i already solved that problem. But now i need the not swapped vold.fstab cause the one in the OP doesnt work, it doesnt recognize any storage