[Q&A] [ROM][Exynos][SM-P901][KitKat-4.4.2][XXUANI1][Aroma]CraftWorks v1.0[2014/11/27
Q&A for [ROM][Exynos][SM-P901][KitKat-4.4.2][XXUANI1][Aroma]CraftWorks v1.0[2014/11/27]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Exynos][SM-P901][KitKat-4.4.2][XXUANI1][Aroma]CraftWorks v1.0[2014/11/27]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Where developers rightful
Unfortunately there is a new The rom Official much better
We wish to support this device Online version lollipop or 4.4.4 or 5.0 Where
alhgan2014 said:
Unfortunately there is a new The rom Official much better
We wish to support this device Online version lollipop or 4.4.4 or 5.0 Where
Click to expand...
Click to collapse
Uh...could you rephrase your question?
4.4.4/5.0 is not out yet. When it is available I will provide a custom ROM.
Thanks for your nice rom!!!!! Excellent
but the wi-fi does not work as there is no root, which is a pity !!!
Quadds said:
Thanks for your nice rom!!!!! Excellent
but the wi-fi does not work as there is no root, which is a pity !!!
Click to expand...
Click to collapse
Please explain...the ROM is rooted. I am using it on my 901.
The wifi works also.
gcrutchr said:
Please explain...the ROM is rooted. I am using it on my 901.
The wifi works also.
Click to expand...
Click to collapse
Waiting next version....
thank u for making this rom for SM-P901
i already download and install this rom
the issue is same, the wifi, mine is a bit funny
after install, wifi works and all, but after a restart, it forgot the wifi password
so i have to type again the wifi password (same wifi as before)
i try wipe and install several times, its still the same problem
and also the aroma installer, it didnt install after the browser selection
i pick chrome, it didnt install
and everything after that selection, like ad free, adobe, etc also didnt install
but that part i can install myself, no problem
only the wifi which i find it annoying to always type the same password after restart
thank u so much for making this rom
16person said:
thank u for making this rom for SM-P901
i already download and install this rom
the issue is same, the wifi, mine is a bit funny
after install, wifi works and all, but after a restart, it forgot the wifi password
so i have to type again the wifi password (same wifi as before)
i try wipe and install several times, its still the same problem
and also the aroma installer, it didnt install after the browser selection
i pick chrome, it didnt install
and everything after that selection, like ad free, adobe, etc also didnt install
but that part i can install myself, no problem
only the wifi which i find it annoying to always type the same password after restart
thank u so much for making this rom
Click to expand...
Click to collapse
Thanks for the feedback. Will look into the issues.
Update: Did you wait for the all the apps to install? I mentioned this is 2 places: 1) On the XDA web page 2) at the end of the user-selectable install (in the Aroma installer). You have to wait for the system to auto reboot before you manually reboot. Apps are being installed during and after the initial ROM setup. It can take up to 5 minutes for the apps to install depending on how many you selected. The apps are really installed using Android Package Manager (pm) - this is to get a good clean install of the selected apps.
Update 2: Check this link out - may help with wifi passwords => Lost Wifi password after reboot
Hope it helps.
Did you do a data wipe before installing ROM? If not, I would suggest you do a wipe then install the ROM to see if it saves Wifi passwords after reboot. All my testing has been done this way.
I had the same thing , but first just did not work wi-fi , and then began to turn off when you set up Google account.
camera issue
Dear my friend
I was installed this rom but camera doesn't work..!
Do you have any solution this problem?
or what do you advise me?
Thanks
---------- Post added at 10:24 AM ---------- Previous post was at 10:10 AM ----------
Dear Onur
i have same problem,because in Turkey registered device SM P902. Actuality we are change it activated phone specification
I think that on the recovery installed sm P901 rom ,like a me)
yes phone is active .But camera doesn't work.
We are waiting solution. ..
camera issue
Dear my frend
My problem ; in Turkey registered device SM P902. (sm p-902 lock gsm version by software) Actuality i was installed change it activated phone specification and i did it on the recovery installing your rom, well done. no problem. yes phone is active .But camera doesn't work.
Do you have any solution this problem?
or what do you advise me?
We are waiting solution. ..
thanks for helpfull.
camera-wifi-gsm line
Koray anarlar said:
Dear my frend
My problem ; in Turkey registered device SM P902. (sm p-902 lock gsm version by software) Actuality i was installed change it activated phone specification and i did it on the recovery installing your rom, well done. no problem. yes phone is active .But camera doesn't work.
Do you have any solution this problem?
or what do you advise me?
We are waiting solution. ..
thanks for helpfull.
Click to expand...
Click to collapse
Hi Dear Koray
Also my device SM-P902 too and i already downloaded craftworks rom from this site but after download i got the problem camera-wifi-3g line.My mean camera doesnt work wifi is not stabilise also dont remembering wifi passwords because of this i have to write all the connection time,finally my device is behaving like a dont have sim place because of this dont asking sim pin code.
If you have a possibilit please send your boot and recovery img files for make download to my device.
Thanks regards
no sim card
gcrutchr said:
Thanks for the feedback. Will look into the issues.
Update: Did you wait for the all the apps to install? I mentioned this is 2 places: 1) On the XDA web page 2) at the end of the user-selectable install (in the Aroma installer). You have to wait for the system to auto reboot before you manually reboot. Apps are being installed during and after the initial ROM setup. It can take up to 5 minutes for the apps to install depending on how many you selected. The apps are really installed using Android Package Manager (pm) - this is to get a good clean install of the selected apps.
Hope it helps.
Did you do a data wipe before installing ROM? If not, I would suggest you do a wipe then install the ROM to see if it saves Wifi passwords after reboot. All my testing has been done this way.
Click to expand...
Click to collapse
Hello gcrutchr
Thank you for the p901 rom.
It works great. I don't have any Wifi password problem or camera problem till I installed.
But as I hardreset my sm-p901 wifi & 3G (actually it's sm-p902 model in Turkey) I lost the original p901 kernel. So I installed p900 kernel and craftwork rom for p901. Because of that I can see the mobile data icon but when I push the mobile data button it says no sim(a working data sim is inserted by the way). This is because the kernel for p900 that I have to install . There are no stock or custom kernels for p901 on the internet. So is there any chance that you can develop a p901 stock kernel OR is there any way that I can enable the 3g Mobile data in the kernel for p900.
Best
thesin2 said:
Hello gcrutchr
Thank you for the p901 rom.
It works great. I don't have any Wifi password problem or camera problem till I installed.
But as I hardreset my sm-p901 wifi & 3G (actually it's sm-p902 model in Turkey) I lost the original p901 kernel. So I installed p900 kernel and craftwork rom for p901. Because of that I can see the mobile data icon but when I push the mobile data button it says no sim(a working data sim is inserted by the way). This is because the kernel for p900 that I have to install . There are no stock or custom kernels for p901 on the internet. So is there any chance that you can develop a p901 stock kernel OR is there any way that I can enable the 3g Mobile data in the kernel for p900.
Best
Click to expand...
Click to collapse
Unfortunately, I am not a kernel developer. The only thing I can do is provide a stock kernel fo XXUANK2. All I have done to the kernel is add a few lines to the ramdisk for superuser functionality. If you want to try a stock kernel (no mods), let me know and I will package an installable stock P901 kernel.
901 kernel
If you can provide stock kernel for p901 that would be great.
If you can make recovery flashable kernel that's enough for me. I only need to work 3g. other parts of your rom works great
thesin2 said:
If you can provide stock kernel for p901 that would be great.
If you can make recovery flashable kernel that's enough for me. I only need to work 3g. other parts of your rom works great
Click to expand...
Click to collapse
Will post a recovery installable stock P901 kernel when I get home later today.
901 kernel
Thank you so much. I'm waiting
thesin2 said:
Thank you so much. I'm waiting
Click to expand...
Click to collapse
Attached is a stock P901 kernel which you can install through recovery.
Note: you will lose root with this kernel - but - you can use Chainfire's SuperSu v2.40 to get root back.
Mega: XXUANK2_kernel_stock.zip
Gcrutchr
Thank you my friend. I installed the kernel and it worked perfect.
The camera the wifi and 3G is working at the moment.
It didn't change the root but in any case I installed the chainfire supersu again.
Thank you again for your support
Best
thesin2 said:
Gcrutchr
Thank you my friend. I installed the kernel and it worked perfect.
The camera the wifi and 3G is working at the moment.
It didn't change the root but in any case I installed the chainfire supersu again.
Thank you again for your support
Best
Click to expand...
Click to collapse
I am happy yo hear things worked out for you.
Related
Hi to everybody, I'm going to update my TFT 101G from the rom stock to the custom one (I've not decided yet which) and after read many topics I started to root the device (done) and install the TWRP through the Goo Manager, I download the latest TWRP (zip file) from this topics
http://forum.xda-developers.com/showthread.php?t=2434422
give the root permits at GooManager but it doesn't recognized the zip file downloaded; what is wrong ? I tried also to change the path were the file is stored (GooManager/setting) but nothing change, I also tried to read the .BLOB file but the message of GooManager is always the same
No recoveries were found for this device
I saw many recovery on GooManager database; may I use one different ?
Thanks to everybody want to help me.
Newibe confused
Edit: I used Terminal emulator instead of Goo Manager and I resolved it; now I start to find a good kernel+ rom to install...
Glad you got it resolved.
I would recommend ShevT's KatKiss 4.3 builds for the TF101G. Look for the link in his forum signature any if his posts.
TimDuru's builds don't have native 3G support, but ShevT has figured it out and does the builds for the 3G built in.
frederuco said:
Glad you got it resolved.
I would recommend ShevT's KatKiss 4.3 builds for the TF101G. Look for the link in his forum signature any if his posts.
TimDuru's builds don't have native 3G support, but ShevT has figured it out and does the builds for the 3G built in.
Click to expand...
Click to collapse
...I just discovered that the rom installed (KatKiss-4.3.1_029) don't have support on 3G !!!
To update it, is enough to flash e new rom or I need to re-flash gapp and kernel ?
gianni_1963 said:
...I just discovered that the rom installed (KatKiss-4.3.1_029) don't have support on 3G !!!
To update it, is enough to flash e new rom or I need to re-flash gapp and kernel ?
Click to expand...
Click to collapse
Look for ShevT's posts in KatKiss to find his version with 3G support.
Then wipe the caches and system partitions.
Flash ShevT's build then the GAPPS and you should be good.
It may be necessary to wipe data too, I've never tried it as I don't have the 3G version. If you experience Random Reboots or Sleep of a Death, wipe data (uninstalls all user apps) and set it up again to see if that helps.
frederuco said:
Look for ShevT's posts in KatKiss to find his version with 3G support.
Then wipe the caches and system partitions.
Flash ShevT's build then the GAPPS and you should be good.
It may be necessary to wipe data too, I've never tried it as I don't have the 3G version. If you experience Random Reboots or Sleep of a Death, wipe data (uninstalls all user apps) and set it up again to see if that helps.
Click to expand...
Click to collapse
Thanks a lot Federuco, I'll try and I let you know.
Regards
gianni_1963 said:
Thanks a lot Federuco, I'll try and I let you know.
Regards
Click to expand...
Click to collapse
...after some days of testing, this are my comment :
very good ROM
stable, if you don't increase spped of processor
many intersting feture
GPS doesn't work (or needs hours to fix)
3G works (sim and system find it) but is not possible to navigate with the browser (KatKiss made by ShevT)
Someone can help me to find a solution at my problems ?
Thanks a lot in advance
am tryi g to take part in the development of this rom but because i am new to the forum, i am not allowed to post replies. Just to explain to Darkman that the new rom does not install on aroma using TWRP but does install on Philz. Having installed I discovered that the wifi is detected but cannot connect. I had to revert to 4.1.2. Did someone experience the same problem on gt n8000? Will there be a new version of this rom with a working WFI
fgking said:
am tryi g to take part in the development of this rom but because i am new to the forum, i am not allowed to post replies. Just to explain to Darkman that the new rom does not install on aroma using TWRP but does install on Philz. Having installed I discovered that the wifi is detected but cannot connect. I had to revert to 4.1.2. Did someone experience the same problem on gt n8000? Will there be a new version of this rom with a working WFI
Click to expand...
Click to collapse
I have just installed stock 4.4.2 on a GT-N8000, but, I cannot enable WiFi as the WiFi toggle button always stays "OFF"
I tried wiping cache, factory reset etc. I just don't want to revert to 4.1.2. If I find a way to get it to work I will post it here. If somebody else knows the solution, please share with us.
Thanks.
nailgg said:
I have just installed stock 4.4.2 on a GT-N8000, but, I cannot enable WiFi as the WiFi toggle button always stays "OFF"
I tried wiping cache, factory reset etc. I just don't want to revert to 4.1.2. If I find a way to get it to work I will post it here. If somebody else knows the solution, please share with us.
Thanks.
Click to expand...
Click to collapse
I have the same problem
Q&A for [ROM][5.1.1] Candy 5 - Skyrocket
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1.1] Candy 5 - Skyrocket. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hello
I changed my i727 to 5 candy lollipop , everything works except that appeals nobody hears me and I hear nothing
Here are the notes from phone
baseband i727ucmc1
Version 3.0.101 CyanogenMod - g0c7bddd
uMTS network
state service
current service
Homelessness: Homelessness without
state of the mobile network : offline
thank you for your answer
i have installed rom from sd card after wipe data and partitions
___________________________________________________________
new:
that's it, after two reboot it works; but I'm waiting still the problem will return, I install once "kitkat bluelighting 4.4.4" and "Slim-skyrocket - 4.4.4.build.6 - OFFICIAL-5252" "
everything worked very well
Thank you
Anaya Boom said:
hello
I changed my i727 to 5 candy lollipop , everything works except that appeals nobody hears me and I hear nothing
Here are the notes from phone
baseband i727ucmc1
Version 3.0.101 CyanogenMod - g0c7bddd
uMTS network
state service
current service
Homelessness: Homelessness without
state of the mobile network : offline
thank you for your answer
i have installed rom from sd card after wipe data and partitions
___________________________________________________________
new:
that's it, after two reboot it works; but I'm waiting still the problem will return, I install once "kitkat bluelighting 4.4.4" and "Slim-skyrocket - 4.4.4.build.6 - OFFICIAL-5252" "
everything worked very well
Thank you
Click to expand...
Click to collapse
This is a problem with most 5.1 roms. Mostly after using another audio app like hangouts phone,whatsapp phone,music players and video players. Driver is not released back too phone.Reboot is needed . On a good note, Paranoid Android 5.1.1 has just come out with an update and an audio patch that fixed mine. Hope this helps.
I don't get any signal
My phone after updating it to candy 5(5.1 Lollipop) I can't get any signal?
Please Help!
New to this
This is the best rom I have installed ever since fixing my bricked Skyrocket a couple weeks ago.
Latest Version 5/15:
After installing the latest update the data drops far less frequently... however it is still a good five times every twenty minutes or when I send two or more text messages. I tried rebooting, messing with wifi/airplane mode, removing excess APN's, and using Signal Boosters which are junk. Folders seem to be a bit different and overall rom is a bit more laggy compared to previous version. My recents menu did not work, holding the home button with no response, fixed by turning on OmniSwitch.
Installing SlipLP fixed the data, so I am confident you will figure it out for Candy! If only I digged the look of SlimLP.
Will report back next update, still learning how to Logcat... I will post if I figure it out tonight.
I am not getting any charging or heat issues like the poster above. I did not change to noop prior to writing this.
Found a PERMANENT signal fix!
Apparently this has something to do with the radio being flashed and 5.x.
Here is how you fix it, I have not had one drop in signal since my previous post!
(For AT&T, T-Mobile, possibly others)
1. Download the [UCMC1] I717 AT&T Radio
http://d-h.st/PKI
- official thread: http://forum.xda-developers.com/showthread.php?t=2228292
2. Either Clean flash or Recover from a backup of Candy 5.x
3. Install the AT&T Radio
Signal drop is fixed, select your APN and enjoy!
I suggest this for those who are using AT&T Servers, T-Mobile, or etc. If not visit here and find your carrier radio... http://forum.xda-developers.com/showthread.php?t=1785999
I hope this helps everybody! :good::fingers-crossed:
I am not a professional, I have been flashing custom for a couple years here and there! This is working on my device, I now have ZERO signal drops and perfect signal, please allow OP to further test.
requiredhq said:
Apparently this has something to do with the radio being flashed and 5.x.
Here is how you fix it, I have not had one drop in signal since my previous post!
(For AT&T, T-Mobile, possibly others)
1. Download the [UCMC1] I717 AT&T Radio
http://d-h.st/PKI
- official thread: http://forum.xda-developers.com/showthread.php?t=2228292
2. Either Clean flash or Recover from a backup of Candy 5.x
3. Install the AT&T Radio
Signal drop is fixed, select your APN and enjoy!
I suggest this for those who are using AT&T Servers, T-Mobile, or etc. If not visit here and find your carrier radio... http://forum.xda-developers.com/showthread.php?t=1785999
I hope this helps everybody! :good::fingers-crossed:
I am not a professional, I have been flashing custom for a couple years here and there! This is working on my device, I now have ZERO signal drops and perfect signal, please allow OP to further test.
Click to expand...
Click to collapse
Thanks, yes the UCMC1 radio or newer is needed for this. It is one of the last versions available for the Skyrocket. My Slim threads have this but I didn't see that mentioned here, so I have updated the OP.
Cheers!
Preinstalled App
Does this ROM has Apollo music player installed?
Hunter661 said:
Does this ROM has Apollo music player installed?
Click to expand...
Click to collapse
It has CM's Eleven music player. You can install whatever you want, Google Music, XenoAmp, etc.
GAPPS
Everything is working on my Skyrocket SGH-I727R but when I want to install gapps from my recovery it says it successful but I can't find google play when I installed the zip. Do I need to use a different GAPPS file?
Candy 5 v2.5.3 onto skyrocket I727 as well as I727R)
tried to update from v2.5.1 .Got Google play bug .
Then did a full wipe and installed on both units with slim Gapps .No more chance .same error .When back to prvious version from restore .
Should we be able to update from the previous 5.1.1 buid v2.5.1 ?
Thanks
Twisterboy669 said:
Everything is working on my Skyrocket SGH-I727R but when I want to install gapps from my recovery it says it successful but I can't find google play when I installed the zip. Do I need to use a different GAPPS file?
Click to expand...
Click to collapse
Michel177 said:
tried to update from v2.5.1 .Got Google play bug .
Then did a full wipe and installed on both units with slim Gapps .No more chance .same error .When back to prvious version from restore .
Should we be able to update from the previous 5.1.1 buid v2.5.1 ?
Thanks
Click to expand...
Click to collapse
Make sure you are using an up-to-date version of GApps. Recommended is Slim's Zero GApps (~60MB), a link to which you can find in the OP.
Google Cards
The google now widget I can't find under the widgets tab is their anyway to retrieve it?
Minor Question
How would you update the 2.53 version to this one?
Twisterboy669 said:
The google now widget I can't find under the widgets tab is their anyway to retrieve it?
Click to expand...
Click to collapse
When you flash the ROM, either the GApps package you flash needs Google Now (might be Google Search, not sure), or you need to install it from the Play Store separately. Voice input on the AOSP/Google keyboards may be missing as well until you do.
I partitioned my Skyrocket to have a 6GB Data partition so the tiny GApps is fine and I can install pretty much all I want for apps. It's quite nice.
Twisterboy669 said:
How would you update the 2.53 version to this one?
Click to expand...
Click to collapse
Wipe Dalvik and Cache in recovery
Make a nandroid backup
Flash the ROM
Flash either Slim Zero GApps or a very small base GApps package
Reboot
Have fun!
Flashing Potential Issue
I am currently Flashing the ROM using TWRP and everything seems good it's just that its stock on "Patching system unconditionally" It's been on that step for about ten minutes. I did the Cache and Dalvick Cache wipes. So I Don't know what I did wrong.
Twisterboy669 said:
I am currently Flashing the ROM using TWRP and everything seems good it's just that its stock on "Patching system unconditionally" It's been on that step for about ten minutes. I did the Cache and Dalvick Cache wipes. So I Don't know what I did wrong.
Click to expand...
Click to collapse
Then it sounds like there were core changes which may require a full wipe (/data or a factory reset).
I normally clean flash to test, so unless I've made a change that I know requires a full wipe, or coming from another version (5.0 vs. 5.1, etc.) I would suggest to try dirty first and see. If you get stuck, as you have, then I'd go clean.
Sorry for any inconvenience...
NoSpamDan said:
Then it sounds like there were core changes which may require a full wipe (/data or a factory reset).
I normally clean flash to test, so unless I've made a change that I know requires a full wipe, or coming from another version (5.0 vs. 5.1, etc.) I would suggest to try dirty first and see. If you get stuck, as you have, then I'd go clean.
Sorry for any inconvenience...
Click to expand...
Click to collapse
When I down graded bak to 2.5.3 It flashed perfectly. So do I just wait for the next update or is their a solution because none of the methods you mentioned to me are working. I backed up my data and did a full factory reset.
Twisterboy669 said:
When I down graded bak to 2.5.3 It flashed perfectly. So do I just wait for the next update or is their a solution because none of the methods you mentioned to me are working. I backed up my data and did a full factory reset.
Click to expand...
Click to collapse
Have you wiped /system in the process?
Have you formatted your device with ODIN using a PIT file, or have you used any virtual partitioning?
Post your recovery log. You can export it from TWRP.
NoSpamDan said:
Have you wiped /system in the process?
Have you formatted your device with ODIN using a PIT file, or have you used any virtual partitioning?
Post your recovery log. You can export it from TWRP.
Click to expand...
Click to collapse
Nvm, Sorry I forgot about the dirty flashing and it worked. Thank you
Q&A for (Share) Resurrection-Remix-LP-v5.5.1-ferrari
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for (Share) Resurrection-Remix-LP-v5.5.1-ferrari. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
apna.suresh0305 said:
I think any custom ROM can't replace the MIUI camera, i tried CM 12.1 but camera is very upset in terms of picture clarity as well camera app is very laggy and some times gets hang and wont response. Not able to dare to try custom ROMs due to this reason.
It would be really very great if anyone can able to port MIUI camera to these custom ROMs.
Click to expand...
Click to collapse
Tottaly agrre with you, xiaomi phone camera is main reason for me, too bad none custom rom able to provide equal result from camera miui rom. If there any it would be fantastic
cannot get cwp installed
hey guys,
i cannot get the CWP installed or the TWRP .... i cannot find the link to download and get the phone into the recovery and install the new rom,
please provide me the links and i will try the rom.
ps: i have tried the TWRP TOOLKIT VERSION 3 , BUT BECAUSE I AM IN THE LATEST MIUI VERSION IT DOESN NOT INSTALL THE TWRP, I HAVE TRIED IT MANY TIMES. ALSO THE VIDEO ON YOUTUBE THAT SAYS THE TWRP TOOLKIT VERSION 4 is redirecting to spam websites,
also i am trying to log in in miui but i have forgot my details and there isnt a reset link ! i am getting despert!!!!
thanks
vrtsvas said:
ps: i have tried the TWRP TOOLKIT VERSION 3 , BUT BECAUSE I AM IN THE LATEST MIUI VERSION IT DOESN NOT INSTALL THE TWRP, I HAVE TRIED IT MANY TIMES. ALSO THE VIDEO ON YOUTUBE THAT SAYS THE TWRP TOOLKIT VERSION 4 is redirecting to spam websites,
also i am trying to log in in miui but i have forgot my details and there isnt a reset link ! i am getting despert!!!!
thanks
Click to expand...
Click to collapse
Try version 4 of the toolkit.
That worked for me.
Also, make sure you do exactly as the desctiption says, don't change the order of actions (as i did) because then it will not work.
First make sure that you pc has the right drivers (or use this: http://forum.xda-developers.com/showthread.php?t=2588979)
Then use v4 from this link and use the right order (http://en.miui.com/thread-117336-1-1.html)
So first TWRP then root (if you still need it).
Automatic turn off issue
How to fix automatic turn off issue
WiFi not working
Please provide WiFi driver
Mi4i going into bootloop after flashing CM based roms!
I have tried almost all of the custom roms(latest ones) available for Xiomi mi 4i but neither of them actually worked for me. Whenever i flash the roms, it gets installed correctly and when it asks for language selection, it shuts off. I have tried flashing with both twrp and cwm, cleared cache, dalvik cache but problem never solved. I think the CM has some serious problems with this devices.
aniketmule said:
I have tried almost all of the custom roms(latest ones) available for Xiomi mi 4i but neither of them actually worked for me. Whenever i flash the roms, it gets installed correctly and when it asks for language selection, it shuts off. I have tried flashing with both twrp and cwm, cleared cache, dalvik cache but problem never solved. I think the CM has some serious problems with this devices.
Click to expand...
Click to collapse
Mine is not directly going into boot loop.
Sometimes it works a few minutes (up to 20 or so), but it will shut down.
When connected to power it does NOT shut down, but still.
I tried yesterday the CM 12.1 version from Smoki3 from july 30th and that seems to work, but i did not have any time any more, so i had to restore my nadroid backup.
Will try it later again (maybe tomorrow) if that really does work, or if it was just to short time for it to shut down.
elot01 said:
Mine is not directly going into boot loop.
Sometimes it works a few minutes (up to 20 or so), but it will shut down.
When connected to power it does NOT shut down, but still.
I tried yesterday the CM 12.1 version from Smoki3 from july 30th and that seems to work, but i did not have any time any more, so i had to restore my nadroid backup.
Will try it later again (maybe tomorrow) if that really does work, or if it was just to short time for it to shut down.
Click to expand...
Click to collapse
I think I was using developer rom and flashed CM on it directly so the problem occured. I read somewhere on a forum that you should flash it on global rom. I tried it with ASOPA-L rom as it was having the same problem and it worked flawlessly. Now going to try it with latest CM rom.
One thing I noticed the camera quality is better in ASOPA-L but this rom lacks performance mode.
I'm experiencing bad speaker sound after installing this ROM. Is there any way to fix that.
Sent from my Mi 4i using Tapatalk
I'm absolutely loving this rom. I've no idea why xiaomi let's miui be so slow and laggy. This room feels great and everything runs/opens so much faster and it looks fantastic. Cmon Xiaomi, step up your game, miui is way too heavy.
Like other people have mentioned, the only downside to not having miui is the camera. I've tried a bunch of others and the quality is greatly reduced compared to the miui camera. Please someone, please port miui 6 camera!!! PLEASE!! I'll be your best friend.
Whenever i boot ..it turns off...pls hlp
Thanks in advance
vrtsvas said:
hey guys,
i cannot get the CWP installed or the TWRP .... i cannot find the link to download and get the phone into the recovery and install the new rom,
please provide me the links and i will try the rom.
ps: i have tried the TWRP TOOLKIT VERSION 3 , BUT BECAUSE I AM IN THE LATEST MIUI VERSION IT DOESN NOT INSTALL THE TWRP, I HAVE TRIED IT MANY TIMES. ALSO THE VIDEO ON YOUTUBE THAT SAYS THE TWRP TOOLKIT VERSION 4 is redirecting to spam websites,
also i am trying to log in in miui but i have forgot my details and there isnt a reset link ! i am getting despert!!!!
thanks
Click to expand...
Click to collapse
i also experienced the same problem when i was on miui 7 beta... i was able to flash twrp recovery but failed to flash custom ROMs... after that i reverted back to miui6 6.6.10.0 by using fastboot... and then again flashed twrp using mi toolkit v4 and succeeded in flashing custom ROM... this works 100%.Keep in mind that u can't flash a custom ROM..if u r on later version of 6.6.10.0
A while back i managed to root my Canadian s6 (g920w8) using ping pong root? An app I downloaded from google playstore.. I used root checker and it looks good.. I am rooted.
Do now I'd like to put custom firmware on to get rid of all the crap that comes with this phone.. it is so damn slow its driving me crazy!
Any help is greatly appreciated. Thanks.
1roddy said:
A while back i managed to root my Canadian s6 (g920w8) using ping pong root? An app I downloaded from google playstore.. I used root checker and it looks good.. I am rooted.
Do now I'd like to put custom firmware on to get rid of all the crap that comes with this phone.. it is so damn slow its driving me crazy!
Any help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
Anyone?
There is a few things u can do. Custom ROM and Kernel and recovery. Which I prefer to do. If you just want to remove the bloat download titanium backup
What are you looking for in a Rom? Better ?? Better ?? More memory and performance?
Sent from my SM-G920F using Tapatalk
Well its taken me awhile but ive got time to do some time finally.. i put alliance rom on the phone but when i tried to make a phone call the was no sound on either end of the conversation.. is this a kernal issue?
think this is the best rom arround here alexis rom best battery ad performans
https://forum.xda-developers.com/galaxy-s6/development/alexis-rom-1-0-feel-game-sound-01-04-t3349944
Just tried the Alexis Rom and same thing.. stuck on boot. I reinstalled Alliance hoping for diffrent results.. can text message but no audio during a calls.. ugh! Back to stock again lol..
Provider - Telus
S6 920w8
Stock Android version - 5.0.2
Stock Kernal 3.10.61-4808800
I am using TWRP v2.8.6.0 and am wondering if the version or kernal may have anything to do with getting stuck on boot with almost every ROM i've tried to install..
My procedure when installing a custom ROM is to do a factory reset from TWRP (i dont do data or format because there is no sd card slot to store my rom or backup image), install ROM, clear cache/divik, reboot to system.
Any Ideas??
1roddy said:
Just tried the Alexis Rom and same thing.. stuck on boot. I reinstalled Alliance hoping for diffrent results.. can text message but no audio during a calls.. ugh! Back to stock again lol..
Provider - Telus
S6 920w8
Stock Android version - 5.0.2
Stock Kernal 3.10.61-4808800
I am using TWRP v2.8.6.0 and am wondering if the version or kernal may have anything to do with getting stuck on boot with almost every ROM i've tried to install..
My procedure when installing a custom ROM is to do a factory reset from TWRP (i dont do data or format because there is no sd card slot to store my rom or backup image), install ROM, clear cache/divik, reboot to system.
Any Ideas??
Click to expand...
Click to collapse
Reflash any ROM giving you sound issues and then flash either hacker kernel or arter kernel as they are the only two compatible as far as I know. Once you have flashed arter kernel and then rebooted your phone. Reboot your phone back into recovery once more and then flash this https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk it is the call audio fix for our devices (925T / 925W8)
(920T / 920W8)
Just make sure you DO NOT FLASH THIS BEFORE DEVICE REBOOT AFTER FLASHING CUSTOM KERNEL. Or you will get into a bootloop and say this doesn't work. (Your system needs to build with kernel settings first)
Here's a step by step I hope helps.
1. Flash custom ROM
2. Flash custom kernel
3. REBOOT
4. Set up ROM.
5. Reboot into recovery.
6. Flash call fix.
7. REBOOT
8. Profit.
Hope it helps you and welcome to making your phone truly yours.
---------- Post added at 01:46 PM ---------- Previous post was at 01:39 PM ----------
Another reason why you are not booting is because you are on 5.0.1
You will have to update the bootloader to MM 6.0 first in order to use 6.0 custom ROMs this can be achieved by flashing any of our latest Canadian firmwares. (Does not matter what company if you are changing FW after.)
ALSO you can use the advanced wipe settings on TWRP to wipe everything but 'internal storage' that is where the ROM is downloaded.
I had alot of issues installing custom ROM's.. so i decided to upgrade and install OEM marshmallow 6.0.1 then re-root my phone. It worked.. I'm running Griffin ROM atm but will play around with other roms now that i have a good idea of where i went wrong.
1roddy said:
I had alot of issues installing custom ROM's.. so i decided to upgrade and install OEM marshmallow 6.0.1 then re-root my phone. It worked.. I'm running Griffin ROM atm but will play around with other roms now that i have a good idea of where i went wrong.
Click to expand...
Click to collapse
Griffin is great, I'm also using the latest version.
christopherrrg said:
Griffin is great, I'm also using the latest version.
Click to expand...
Click to collapse
Do you have any trouble sending MMS? Mine seem to hang until they fail..
1roddy said:
Do you have any trouble sending MMS? Mine seem to hang until they fail..
Click to expand...
Click to collapse
I do not. However I always have mobile data running, maybe toggle yours and see if it sends. Some of the new ROMS have incorporated a tweak that auto toggles data to recieve pictures and send them. Griffin AFAIK does not have this tweak yet so when sending MMS you need to manually turn mobile data on and off.
christopherrrg said:
I do not. However I always have mobile data running, maybe toggle yours and see if it sends. Some of the new ROMS have incorporated a tweak that auto toggles data to recieve pictures and send them. Griffin AFAIK does not have this tweak yet so when sending MMS you need to manually turn mobile data on and off.
Click to expand...
Click to collapse
I did another wipe and clean install.. it took care of the problem.. looking for a new kernal now so i can get private mode working.
1roddy said:
I did another wipe and clean install.. it took care of the problem.. looking for a new kernal now so i can get private mode working.
Click to expand...
Click to collapse
Private mode?
Like in the browser? Or in the actual software?
I've never used it before so I've never hunted it down.
(Asking because I shall)
christopherrrg said:
Private mode?
Like in the browser? Or in the actual software?
I've never used it before so I've never hunted it down.
(Asking because I shall)
Click to expand...
Click to collapse
Private mode in setings---> privacy---> private mode. I read somewhere a kernal will fix it.. i'll play around with that later!