Related
Since I can not post here:
[rom] Unofficial CyanogenMod 10 for many AllWinner A10 tablets
because no matter I'm in IT over 15 years I have no 10 posts here, which is quite uncool from XDA, I have to ask here:
I have an Elf, started to hack from with the latest factory firmware (updated with LiveSuit).
Then I decided to have Christian Troy's JellyBean.
I had trouble to get ClockWorkMod running, for example Novotools_v1.0.apk said not enough Internal storage. Finally I managed with
Terminal Emulator_1.0.41.apk and a10_recovery.zip 3 files with these two commands:
su install-recovery.sh
su reboot-recovery.sh
After rebooting to CWM I made a full wipe, than installed these in order:
cm10_a10_20120913.zip
gapps-jb-20120726-signed.zip
elf_compatibility_1.2.0.zip
After rebooting I see the animated CyanogenMod 10 logo, than I should choose language onscreen.
Though hardware keys work (power, volume), touch screen is not responding!
Actuall I dropped it as well after the last reboot, so now I'm not sure if this touch problem is related to CM10 or the drop.
Do you have any ideas what to do?
Flash back to stock to verify if your touchscreen is working. If yes, make sure you don't need to flash a different kernel for your device.
Also, try flashing like you did before, but without gapps. Possibly, your /system partition gets full, so the elf_compatibility thing fails.
-- Sent from my TouchPad using Communities
post-mortem said:
Flash back to stock to verify if your touchscreen is working. If yes, make sure you don't need to flash a different kernel for your device.
Also, try flashing like you did before, but without gapps. Possibly, your /system partition gets full, so the elf_compatibility thing fails.
-- Sent from my TouchPad using Communities
Click to expand...
Click to collapse
I am in the no touch screen boat too. I'm running an elf, but thought I'd try the aurora compatibility files too. Unfortunately, no dice. Flashing back to 4.0.4 stock firmware brings the touchscreen back. More installs of the cm10 for a10 don't help...
Anyone that successfully flashed Christian troy's cm10 build into Ainol Elf 1 care to say which rom they upgraded from? That would be awesome...
Same problem here with Aurora 1 with nightly CM10: no touch
Success!
jan99 said:
Same problem here with Aurora 1 with nightly CM10: no touch
Click to expand...
Click to collapse
OK, managed to trouble-crash my way through to a solution - hopefully it'll help you get to where you were going too...
The first thing I did was try to find the Feiyu ICS *LIVESUIT* image dated 0429. I also downloaded the compatibility patch for the elf - Aurora users won't need this, obviously.
I'm pretty sure this gives you a big enough /system partition, even though using the latest Ainol 4.0.4 firmware allegedly gave me enough.
Anyway, boot into CWM and do a Factory reset *twice*. I then did a cache format, dalvik wipe, battery stats wipe just for good luck. Fix permissions too - who knows why, I just do these things.
I installed the earliest preview release of the ChristianTroy cm10 for a10, installed the compatibility file for the elf (1.2...) , did a cache format, dalvik wipe, reboot... and... touch screen worked! I then installed the *final* cm10 from the ChristianTroy thread.
seems pretty nice, although trebuchet keeps crashing along with lots of my apps. Might use a different launcher.
perhaps cm9 is better? I'll give it a go...
TL;DR - install the livesuit image of the Feiyu ICS rom 0429. Then flash the other things you need. Worked for me, but, as ever, YMMV
post-mortem said:
Flash back to stock to verify if your touchscreen is working. If yes, make sure you don't need to flash a different kernel for your device.
Also, try flashing like you did before, but without gapps. Possibly, your /system partition gets full, so the elf_compatibility thing fails.
-- Sent from my TouchPad using Communities
Click to expand...
Click to collapse
Seems like HW problem, went back to Elvish 0.4, still no touchscreen...
DoubleDroz said:
OK, managed to trouble-crash my way through to a solution - hopefully it'll help you get to where you were going too...
The first thing I did was try to find the Feiyu ICS *LIVESUIT* image dated 0429. I also downloaded the compatibility patch for the elf - Aurora users won't need this, obviously.
I'm pretty sure this gives you a big enough /system partition, even though using the latest Ainol 4.0.4 firmware allegedly gave me enough.
Anyway, boot into CWM and do a Factory reset *twice*. I then did a cache format, dalvik wipe, battery stats wipe just for good luck. Fix permissions too - who knows why, I just do these things.
I installed the earliest preview release of the ChristianTroy cm10 for a10, installed the compatibility file for the elf (1.2...) , did a cache format, dalvik wipe, reboot... and... touch screen worked! I then installed the *final* cm10 from the ChristianTroy thread.
seems pretty nice, although trebuchet keeps crashing along with lots of my apps. Might use a different launcher.
perhaps cm9 is better? I'll give it a go...
TL;DR - install the livesuit image of the Feiyu ICS rom 0429. Then flash the other things you need. Worked for me, but, as ever, YMMV
Click to expand...
Click to collapse
I am facing same problem with Elf1, touch not working after installing CM10. Mouse works just fine. ^^Was this on ELF1 or Aurora?
DoubleDroz said:
OK, managed to trouble-crash my way through to a solution - hopefully it'll help you get to where you were going too...
The first thing I did was try to find the Feiyu ICS *LIVESUIT* image dated 0429. I also downloaded the compatibility patch for the elf - Aurora users won't need this, obviously.
I'm pretty sure this gives you a big enough /system partition, even though using the latest Ainol 4.0.4 firmware allegedly gave me enough.
Anyway, boot into CWM and do a Factory reset *twice*. I then did a cache format, dalvik wipe, battery stats wipe just for good luck. Fix permissions too - who knows why, I just do these things.
I installed the earliest preview release of the ChristianTroy cm10 for a10, installed the compatibility file for the elf (1.2...) , did a cache format, dalvik wipe, reboot... and... touch screen worked! I then installed the *final* cm10 from the ChristianTroy thread.
seems pretty nice, although trebuchet keeps crashing along with lots of my apps. Might use a different launcher.
perhaps cm9 is better? I'll give it a go...
TL;DR - install the livesuit image of the Feiyu ICS rom 0429. Then flash the other things you need. Worked for me, but, as ever, YMMV
Click to expand...
Click to collapse
Would appreciate if you could share those image files that you used...
nevermind
vipulpradhan said:
I am facing same problem with Elf1, touch not working after installing CM10. Mouse works just fine. ^^Was this on ELF1 or Aurora?
Click to expand...
Click to collapse
It was the Elf 1
---------- Post added at 02:47 AM ---------- Previous post was at 02:08 AM ----------
vipulpradhan said:
Would appreciate if you could share those image files that you used...
Click to expand...
Click to collapse
The files can be found at *double u, double u, double u dot* ainol-forum.de *slash* ainol-novo-7-aurora-1-i-2-ii *slash* roms-novo-7-aurora-1-i *slash* 302-rom-aurora-v1-feiyu-mod-0429 *slash*
Don't download from the 115 links - they're all locked up. The mirrors work, however.
If you have an Elf, get the Aurora v1 rom. Get the Livesuit Version, and install using... Livesuit.
If you have an Elf, you must also download the Elf Patch, which you install using CWM once you've installed 0429 through LiveSuit.
Give it a shot.
Sorry for the delay - been doing other things!
PS I can't directly put in a link because XDA won't let me - I don't have enough posts - but I've changed it so you can pretty obviously work out the url. Okie dokes?
Same problem? anyone found solution
hi,
i am also lost touch screen.
Has anyone found solution??
DoubleDroz said:
OK, managed to trouble-crash my way through to a solution - hopefully it'll help you get to where you were going too...
The first thing I did was try to find the Feiyu ICS *LIVESUIT* image dated 0429. I also downloaded the compatibility patch for the elf - Aurora users won't need this, obviously.
I'm pretty sure this gives you a big enough /system partition, even though using the latest Ainol 4.0.4 firmware allegedly gave me enough.
Anyway, boot into CWM and do a Factory reset *twice*. I then did a cache format, dalvik wipe, battery stats wipe just for good luck. Fix permissions too - who knows why, I just do these things.
I installed the earliest preview release of the ChristianTroy cm10 for a10, installed the compatibility file for the elf (1.2...) , did a cache format, dalvik wipe, reboot... and... touch screen worked! I then installed the *final* cm10 from the ChristianTroy thread.
seems pretty nice, although trebuchet keeps crashing along with lots of my apps. Might use a different launcher.
perhaps cm9 is better? I'll give it a go...
TL;DR - install the livesuit image of the Feiyu ICS rom 0429. Then flash the other things you need. Worked for me, but, as ever, YMMV
Click to expand...
Click to collapse
Please can you explain how you managed to boot it recovery? i am not able to reboot in recovery. it starts the new rom & stuck as no touch screen.
[Q&A] [ROM][Exynos][SM-P901][KitKat-4.4.2][XXUANI1][Aroma]CraftWorks v1.0[2014/11/27
Q&A for [ROM][Exynos][SM-P901][KitKat-4.4.2][XXUANI1][Aroma]CraftWorks v1.0[2014/11/27]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Exynos][SM-P901][KitKat-4.4.2][XXUANI1][Aroma]CraftWorks v1.0[2014/11/27]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Where developers rightful
Unfortunately there is a new The rom Official much better
We wish to support this device Online version lollipop or 4.4.4 or 5.0 Where
alhgan2014 said:
Unfortunately there is a new The rom Official much better
We wish to support this device Online version lollipop or 4.4.4 or 5.0 Where
Click to expand...
Click to collapse
Uh...could you rephrase your question?
4.4.4/5.0 is not out yet. When it is available I will provide a custom ROM.
Thanks for your nice rom!!!!! Excellent
but the wi-fi does not work as there is no root, which is a pity !!!
Quadds said:
Thanks for your nice rom!!!!! Excellent
but the wi-fi does not work as there is no root, which is a pity !!!
Click to expand...
Click to collapse
Please explain...the ROM is rooted. I am using it on my 901.
The wifi works also.
gcrutchr said:
Please explain...the ROM is rooted. I am using it on my 901.
The wifi works also.
Click to expand...
Click to collapse
Waiting next version....
thank u for making this rom for SM-P901
i already download and install this rom
the issue is same, the wifi, mine is a bit funny
after install, wifi works and all, but after a restart, it forgot the wifi password
so i have to type again the wifi password (same wifi as before)
i try wipe and install several times, its still the same problem
and also the aroma installer, it didnt install after the browser selection
i pick chrome, it didnt install
and everything after that selection, like ad free, adobe, etc also didnt install
but that part i can install myself, no problem
only the wifi which i find it annoying to always type the same password after restart
thank u so much for making this rom
16person said:
thank u for making this rom for SM-P901
i already download and install this rom
the issue is same, the wifi, mine is a bit funny
after install, wifi works and all, but after a restart, it forgot the wifi password
so i have to type again the wifi password (same wifi as before)
i try wipe and install several times, its still the same problem
and also the aroma installer, it didnt install after the browser selection
i pick chrome, it didnt install
and everything after that selection, like ad free, adobe, etc also didnt install
but that part i can install myself, no problem
only the wifi which i find it annoying to always type the same password after restart
thank u so much for making this rom
Click to expand...
Click to collapse
Thanks for the feedback. Will look into the issues.
Update: Did you wait for the all the apps to install? I mentioned this is 2 places: 1) On the XDA web page 2) at the end of the user-selectable install (in the Aroma installer). You have to wait for the system to auto reboot before you manually reboot. Apps are being installed during and after the initial ROM setup. It can take up to 5 minutes for the apps to install depending on how many you selected. The apps are really installed using Android Package Manager (pm) - this is to get a good clean install of the selected apps.
Update 2: Check this link out - may help with wifi passwords => Lost Wifi password after reboot
Hope it helps.
Did you do a data wipe before installing ROM? If not, I would suggest you do a wipe then install the ROM to see if it saves Wifi passwords after reboot. All my testing has been done this way.
I had the same thing , but first just did not work wi-fi , and then began to turn off when you set up Google account.
camera issue
Dear my friend
I was installed this rom but camera doesn't work..!
Do you have any solution this problem?
or what do you advise me?
Thanks
---------- Post added at 10:24 AM ---------- Previous post was at 10:10 AM ----------
Dear Onur
i have same problem,because in Turkey registered device SM P902. Actuality we are change it activated phone specification
I think that on the recovery installed sm P901 rom ,like a me)
yes phone is active .But camera doesn't work.
We are waiting solution. ..
camera issue
Dear my frend
My problem ; in Turkey registered device SM P902. (sm p-902 lock gsm version by software) Actuality i was installed change it activated phone specification and i did it on the recovery installing your rom, well done. no problem. yes phone is active .But camera doesn't work.
Do you have any solution this problem?
or what do you advise me?
We are waiting solution. ..
thanks for helpfull.
camera-wifi-gsm line
Koray anarlar said:
Dear my frend
My problem ; in Turkey registered device SM P902. (sm p-902 lock gsm version by software) Actuality i was installed change it activated phone specification and i did it on the recovery installing your rom, well done. no problem. yes phone is active .But camera doesn't work.
Do you have any solution this problem?
or what do you advise me?
We are waiting solution. ..
thanks for helpfull.
Click to expand...
Click to collapse
Hi Dear Koray
Also my device SM-P902 too and i already downloaded craftworks rom from this site but after download i got the problem camera-wifi-3g line.My mean camera doesnt work wifi is not stabilise also dont remembering wifi passwords because of this i have to write all the connection time,finally my device is behaving like a dont have sim place because of this dont asking sim pin code.
If you have a possibilit please send your boot and recovery img files for make download to my device.
Thanks regards
no sim card
gcrutchr said:
Thanks for the feedback. Will look into the issues.
Update: Did you wait for the all the apps to install? I mentioned this is 2 places: 1) On the XDA web page 2) at the end of the user-selectable install (in the Aroma installer). You have to wait for the system to auto reboot before you manually reboot. Apps are being installed during and after the initial ROM setup. It can take up to 5 minutes for the apps to install depending on how many you selected. The apps are really installed using Android Package Manager (pm) - this is to get a good clean install of the selected apps.
Hope it helps.
Did you do a data wipe before installing ROM? If not, I would suggest you do a wipe then install the ROM to see if it saves Wifi passwords after reboot. All my testing has been done this way.
Click to expand...
Click to collapse
Hello gcrutchr
Thank you for the p901 rom.
It works great. I don't have any Wifi password problem or camera problem till I installed.
But as I hardreset my sm-p901 wifi & 3G (actually it's sm-p902 model in Turkey) I lost the original p901 kernel. So I installed p900 kernel and craftwork rom for p901. Because of that I can see the mobile data icon but when I push the mobile data button it says no sim(a working data sim is inserted by the way). This is because the kernel for p900 that I have to install . There are no stock or custom kernels for p901 on the internet. So is there any chance that you can develop a p901 stock kernel OR is there any way that I can enable the 3g Mobile data in the kernel for p900.
Best
thesin2 said:
Hello gcrutchr
Thank you for the p901 rom.
It works great. I don't have any Wifi password problem or camera problem till I installed.
But as I hardreset my sm-p901 wifi & 3G (actually it's sm-p902 model in Turkey) I lost the original p901 kernel. So I installed p900 kernel and craftwork rom for p901. Because of that I can see the mobile data icon but when I push the mobile data button it says no sim(a working data sim is inserted by the way). This is because the kernel for p900 that I have to install . There are no stock or custom kernels for p901 on the internet. So is there any chance that you can develop a p901 stock kernel OR is there any way that I can enable the 3g Mobile data in the kernel for p900.
Best
Click to expand...
Click to collapse
Unfortunately, I am not a kernel developer. The only thing I can do is provide a stock kernel fo XXUANK2. All I have done to the kernel is add a few lines to the ramdisk for superuser functionality. If you want to try a stock kernel (no mods), let me know and I will package an installable stock P901 kernel.
901 kernel
If you can provide stock kernel for p901 that would be great.
If you can make recovery flashable kernel that's enough for me. I only need to work 3g. other parts of your rom works great
thesin2 said:
If you can provide stock kernel for p901 that would be great.
If you can make recovery flashable kernel that's enough for me. I only need to work 3g. other parts of your rom works great
Click to expand...
Click to collapse
Will post a recovery installable stock P901 kernel when I get home later today.
901 kernel
Thank you so much. I'm waiting
thesin2 said:
Thank you so much. I'm waiting
Click to expand...
Click to collapse
Attached is a stock P901 kernel which you can install through recovery.
Note: you will lose root with this kernel - but - you can use Chainfire's SuperSu v2.40 to get root back.
Mega: XXUANK2_kernel_stock.zip
Gcrutchr
Thank you my friend. I installed the kernel and it worked perfect.
The camera the wifi and 3G is working at the moment.
It didn't change the root but in any case I installed the chainfire supersu again.
Thank you again for your support
Best
thesin2 said:
Gcrutchr
Thank you my friend. I installed the kernel and it worked perfect.
The camera the wifi and 3G is working at the moment.
It didn't change the root but in any case I installed the chainfire supersu again.
Thank you again for your support
Best
Click to expand...
Click to collapse
I am happy yo hear things worked out for you.
I realize there are some dedicated threads to this device. Quite a few actually. Probably too many which is leading to information overload.
Also this device isn't the newest kid on the block. NOOK TABLET (BNTV250A)
Just wondering if someone on this forum would share some working rom/gapps combinations with me.
Yes I know about the cyanogen download site. But I am finding that getting a rom working with a gapps is kind of hit and miss.
I do have an old version of jelly bean working on the device now just by chance. I went through many versions of jb gapps before I got it right.
Now I know jb is a good OS but there are some bug that I don't like. black screens and goo.im not working to mention a few.
So I would like to get kit kat or lolli pop working. For kit kat I have found nothing that won't stop boot looping.
And for lolli pop it's so sluggish that it's pretty much unusable. Anyway I won't babble on any more.
This is what I have working right now. ( cm-10.1-20130117-19-acclaim-HD.zip ) internal cm10.1 and ( gapps-jb-20130812-signed.zip )
And no other combination have worked.
Thanks
nandroid123
nandroid123 said:
I realize there are some dedicated threads to this device. Quite a few actually. Probably too many which is leading to information overload.
Also this device isn't the newest kid on the block. NOOK TABLET (BNTV250A)
Just wondering if someone on this forum would share some working rom/gapps combinations with me.
Yes I know about the cyanogen download site. But I am finding that getting a rom working with a gapps is kind of hit and miss.
I do have an old version of jelly bean working on the device now just by chance. I went through many versions of jb gapps before I got it right.
Now I know jb is a good OS but there are some bug that I don't like. black screens and goo.im not working to mention a few.
So I would like to get kit kat or lolli pop working. For kit kat I have found nothing that won't stop boot looping.
And for lolli pop it's so sluggish that it's pretty much unusable. Anyway I won't babble on any more.
This is what I have working right now. ( cm-10.1-20130117-19-acclaim-HD.zip ) internal cm10.1 and ( gapps-jb-20130812-signed.zip )
And no other combination have worked.
Thanks
nandroid123
Click to expand...
Click to collapse
You're device is officially supported by Cyanogenmod.
Just use the latest CM11 / CM12 from HERE
GApps working with ALL CM11/12 roms can be found HERE
Also your device has its own section HERE
Thanks lubeck for your reply.
If you check those cm11 downloads, most of them say 404 not found. Some of the cm12 are the same. CM10 are mostly there.
Thanks for the gapps page I will check that out thoroughly.
Yes I'm aware of the specific thread. No replies to my queries yet.
thanks
nandroid123 said:
Thanks lubeck for your reply.
If you check those cm11 downloads, most of them say 404 not found. Some of the cm12 are the same. CM10 are mostly there.
Thanks for the gapps page I will check that out thoroughly.
Yes I'm aware of the specific thread. No replies to my queries yet.
thanks
Click to expand...
Click to collapse
Its LS.xD, Lübeck is my home town
THIS CM11 should totally do it
Already got latest TWRP ?
Sorry LS.xD stupid me. I will try the cm11. thanks
Is there a specific gapps that you would recommend with this rom ?
Yes I have the newest twrp but still having problems with twrp seeing newly inserted sd cards. I have to run twrp internally and make sure the sd card is already inserted or twrp won't find it. CWM does not have this problem. Any ideas on that.
Will the latest CWM install this cm11 rom correctly ??
thanks
nandroid123 said:
Sorry LS.xD stupid me. I will try the cm11. thanks
Is there a specific gapps that you would recommend with this rom ?
Yes I have the newest twrp but still having problems with twrp seeing newly inserted sd cards. I have to run twrp internally and make sure the sd card is already inserted or twrp won't find it. CWM does not have this problem. Any ideas on that.
Will the latest CWM install this cm11 rom correctly ??
thanks
Click to expand...
Click to collapse
CWM 6.0.4.9 or newer will also flash it. I prefer TWRP due to the awesome and easy to handle touch interface. SD card should always beeing inserted before you run your custom recovery. The linked CM11 is the latest Snapshot (Most features should work on this) and should run fine with the gapps I mentioned.
LS.xD
That cm11 you told me to try is the same one that always boot loops for me.
Just exactly how do you install yours ? What recovery do you use. And can you tell me what gapps you used.
thanks
nandroid123 said:
LS.xD
That cm11 you told me to try is the same one that always boot loops for me.
Just exactly how do you install yours ? What recovery do you use. And can you tell me what gapps you used.
thanks
Click to expand...
Click to collapse
Just follow step-by-step
CM11
CM12
Wow got it to work !!
I had to use the exact recovery that was listed. Guess that will teach me to read instructions carefully !!
Thank you for your help LS.xD
nandroid123 said:
Wow got it to work !!
I had to use the exact recovery that was listed. Guess that will teach me to read instructions carefully !!
Thank you for your help LS.xD
Click to expand...
Click to collapse
Its all about learning
And if i HELPED you, press "thanks" at the bottom of my posts
LS.xD are you currently running any cm12 on the acclaim ?
I read the instructions pretty thoroughly this time but I still have cm12 running very slowly. Haven't actually made it through the google registration without the keyboard or something else failing.
I used the listed recovery and it ran no problems.
Any hints here ?
thanks
nandroid123
nandroid123 said:
LS.xD are you currently running any cm12 on the acclaim ?
I read the instructions pretty thoroughly this time but I still have cm12 running very slowly. Haven't actually made it through the google registration without the keyboard or something else failing.
I used the listed recovery and it ran no problems.
Any hints here ?
thanks
nandroid123
Click to expand...
Click to collapse
CM12 is still under development and you probably get a better performance and more reliable user experience with CM11. Did you you use the PA GAPPS I mentioned before? Did you perform a full wipe before installing a new rom?
BTW
I do not own the device myself, so I have no way to test the specific CyanogenMod versions...
Oh yes I always wipe user data, cache and dalvik before a rom install.
This is the gapps I tried last pa_gapps-modular-pico-5.0.1-20150221-signed.zip
I have tried several others.
cm11 installed so nicely once I used the correct recovery. I thought maybe cm12 would, but not so lucky.
Anyone else have any luck with CM12 ? Maybe you could share the details ?
thanks
I now have CM12 running on my 16gb nook tablet (BNTV250). Never did get CM12 working on the 8gb nook tablet. I'm thinking maybe a memory issue ?
I don't know but I would like to hear from anyone that has CM12 working properly on a 8gb model and how they did it.
Q&A for [ROM][5.1.1] Candy 5 - Skyrocket
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1.1] Candy 5 - Skyrocket. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hello
I changed my i727 to 5 candy lollipop , everything works except that appeals nobody hears me and I hear nothing
Here are the notes from phone
baseband i727ucmc1
Version 3.0.101 CyanogenMod - g0c7bddd
uMTS network
state service
current service
Homelessness: Homelessness without
state of the mobile network : offline
thank you for your answer
i have installed rom from sd card after wipe data and partitions
___________________________________________________________
new:
that's it, after two reboot it works; but I'm waiting still the problem will return, I install once "kitkat bluelighting 4.4.4" and "Slim-skyrocket - 4.4.4.build.6 - OFFICIAL-5252" "
everything worked very well
Thank you
Anaya Boom said:
hello
I changed my i727 to 5 candy lollipop , everything works except that appeals nobody hears me and I hear nothing
Here are the notes from phone
baseband i727ucmc1
Version 3.0.101 CyanogenMod - g0c7bddd
uMTS network
state service
current service
Homelessness: Homelessness without
state of the mobile network : offline
thank you for your answer
i have installed rom from sd card after wipe data and partitions
___________________________________________________________
new:
that's it, after two reboot it works; but I'm waiting still the problem will return, I install once "kitkat bluelighting 4.4.4" and "Slim-skyrocket - 4.4.4.build.6 - OFFICIAL-5252" "
everything worked very well
Thank you
Click to expand...
Click to collapse
This is a problem with most 5.1 roms. Mostly after using another audio app like hangouts phone,whatsapp phone,music players and video players. Driver is not released back too phone.Reboot is needed . On a good note, Paranoid Android 5.1.1 has just come out with an update and an audio patch that fixed mine. Hope this helps.
I don't get any signal
My phone after updating it to candy 5(5.1 Lollipop) I can't get any signal?
Please Help!
New to this
This is the best rom I have installed ever since fixing my bricked Skyrocket a couple weeks ago.
Latest Version 5/15:
After installing the latest update the data drops far less frequently... however it is still a good five times every twenty minutes or when I send two or more text messages. I tried rebooting, messing with wifi/airplane mode, removing excess APN's, and using Signal Boosters which are junk. Folders seem to be a bit different and overall rom is a bit more laggy compared to previous version. My recents menu did not work, holding the home button with no response, fixed by turning on OmniSwitch.
Installing SlipLP fixed the data, so I am confident you will figure it out for Candy! If only I digged the look of SlimLP.
Will report back next update, still learning how to Logcat... I will post if I figure it out tonight.
I am not getting any charging or heat issues like the poster above. I did not change to noop prior to writing this.
Found a PERMANENT signal fix!
Apparently this has something to do with the radio being flashed and 5.x.
Here is how you fix it, I have not had one drop in signal since my previous post!
(For AT&T, T-Mobile, possibly others)
1. Download the [UCMC1] I717 AT&T Radio
http://d-h.st/PKI
- official thread: http://forum.xda-developers.com/showthread.php?t=2228292
2. Either Clean flash or Recover from a backup of Candy 5.x
3. Install the AT&T Radio
Signal drop is fixed, select your APN and enjoy!
I suggest this for those who are using AT&T Servers, T-Mobile, or etc. If not visit here and find your carrier radio... http://forum.xda-developers.com/showthread.php?t=1785999
I hope this helps everybody! :good::fingers-crossed:
I am not a professional, I have been flashing custom for a couple years here and there! This is working on my device, I now have ZERO signal drops and perfect signal, please allow OP to further test.
requiredhq said:
Apparently this has something to do with the radio being flashed and 5.x.
Here is how you fix it, I have not had one drop in signal since my previous post!
(For AT&T, T-Mobile, possibly others)
1. Download the [UCMC1] I717 AT&T Radio
http://d-h.st/PKI
- official thread: http://forum.xda-developers.com/showthread.php?t=2228292
2. Either Clean flash or Recover from a backup of Candy 5.x
3. Install the AT&T Radio
Signal drop is fixed, select your APN and enjoy!
I suggest this for those who are using AT&T Servers, T-Mobile, or etc. If not visit here and find your carrier radio... http://forum.xda-developers.com/showthread.php?t=1785999
I hope this helps everybody! :good::fingers-crossed:
I am not a professional, I have been flashing custom for a couple years here and there! This is working on my device, I now have ZERO signal drops and perfect signal, please allow OP to further test.
Click to expand...
Click to collapse
Thanks, yes the UCMC1 radio or newer is needed for this. It is one of the last versions available for the Skyrocket. My Slim threads have this but I didn't see that mentioned here, so I have updated the OP.
Cheers!
Preinstalled App
Does this ROM has Apollo music player installed?
Hunter661 said:
Does this ROM has Apollo music player installed?
Click to expand...
Click to collapse
It has CM's Eleven music player. You can install whatever you want, Google Music, XenoAmp, etc.
GAPPS
Everything is working on my Skyrocket SGH-I727R but when I want to install gapps from my recovery it says it successful but I can't find google play when I installed the zip. Do I need to use a different GAPPS file?
Candy 5 v2.5.3 onto skyrocket I727 as well as I727R)
tried to update from v2.5.1 .Got Google play bug .
Then did a full wipe and installed on both units with slim Gapps .No more chance .same error .When back to prvious version from restore .
Should we be able to update from the previous 5.1.1 buid v2.5.1 ?
Thanks
Twisterboy669 said:
Everything is working on my Skyrocket SGH-I727R but when I want to install gapps from my recovery it says it successful but I can't find google play when I installed the zip. Do I need to use a different GAPPS file?
Click to expand...
Click to collapse
Michel177 said:
tried to update from v2.5.1 .Got Google play bug .
Then did a full wipe and installed on both units with slim Gapps .No more chance .same error .When back to prvious version from restore .
Should we be able to update from the previous 5.1.1 buid v2.5.1 ?
Thanks
Click to expand...
Click to collapse
Make sure you are using an up-to-date version of GApps. Recommended is Slim's Zero GApps (~60MB), a link to which you can find in the OP.
Google Cards
The google now widget I can't find under the widgets tab is their anyway to retrieve it?
Minor Question
How would you update the 2.53 version to this one?
Twisterboy669 said:
The google now widget I can't find under the widgets tab is their anyway to retrieve it?
Click to expand...
Click to collapse
When you flash the ROM, either the GApps package you flash needs Google Now (might be Google Search, not sure), or you need to install it from the Play Store separately. Voice input on the AOSP/Google keyboards may be missing as well until you do.
I partitioned my Skyrocket to have a 6GB Data partition so the tiny GApps is fine and I can install pretty much all I want for apps. It's quite nice.
Twisterboy669 said:
How would you update the 2.53 version to this one?
Click to expand...
Click to collapse
Wipe Dalvik and Cache in recovery
Make a nandroid backup
Flash the ROM
Flash either Slim Zero GApps or a very small base GApps package
Reboot
Have fun!
Flashing Potential Issue
I am currently Flashing the ROM using TWRP and everything seems good it's just that its stock on "Patching system unconditionally" It's been on that step for about ten minutes. I did the Cache and Dalvick Cache wipes. So I Don't know what I did wrong.
Twisterboy669 said:
I am currently Flashing the ROM using TWRP and everything seems good it's just that its stock on "Patching system unconditionally" It's been on that step for about ten minutes. I did the Cache and Dalvick Cache wipes. So I Don't know what I did wrong.
Click to expand...
Click to collapse
Then it sounds like there were core changes which may require a full wipe (/data or a factory reset).
I normally clean flash to test, so unless I've made a change that I know requires a full wipe, or coming from another version (5.0 vs. 5.1, etc.) I would suggest to try dirty first and see. If you get stuck, as you have, then I'd go clean.
Sorry for any inconvenience...
NoSpamDan said:
Then it sounds like there were core changes which may require a full wipe (/data or a factory reset).
I normally clean flash to test, so unless I've made a change that I know requires a full wipe, or coming from another version (5.0 vs. 5.1, etc.) I would suggest to try dirty first and see. If you get stuck, as you have, then I'd go clean.
Sorry for any inconvenience...
Click to expand...
Click to collapse
When I down graded bak to 2.5.3 It flashed perfectly. So do I just wait for the next update or is their a solution because none of the methods you mentioned to me are working. I backed up my data and did a full factory reset.
Twisterboy669 said:
When I down graded bak to 2.5.3 It flashed perfectly. So do I just wait for the next update or is their a solution because none of the methods you mentioned to me are working. I backed up my data and did a full factory reset.
Click to expand...
Click to collapse
Have you wiped /system in the process?
Have you formatted your device with ODIN using a PIT file, or have you used any virtual partitioning?
Post your recovery log. You can export it from TWRP.
NoSpamDan said:
Have you wiped /system in the process?
Have you formatted your device with ODIN using a PIT file, or have you used any virtual partitioning?
Post your recovery log. You can export it from TWRP.
Click to expand...
Click to collapse
Nvm, Sorry I forgot about the dirty flashing and it worked. Thank you
CyanogenMod and D2VZW: Marshmallow Love!
To Make this easy, I am going to copy a bit of the common sense information Master Cylinder put up for the release of Lollipop, same basics apply here!
Huge thanks to Invisiblek for making these builds for us!
Thanks to Master Cylinder for all the super useful information!
De-unified Marshmallow builds for the Galaxy S3 line. This is for the Verizon variant (SCH-I535) only
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 which is designed to increase performance and reliability over stock Android for your device.
Notes:
Please Use Firmware: VRBMF1
and
Modem/Baseband Version: NE1 (Also, see "Notes - Possible Bugs" section below)
(EDIT: The following statement might not be true. It happened to one user. Unsure about circumstances...)If you have recently downgraded firmware from 4.3 to 4.1.2, DO NOT flash the MF1 firmware. You'll brick your device!
If you know you never took the 4.3 OTA, then you can flash the firmware and modem to your hearts content.
CWM Recovery addicts: Please seriously consider giving up CWM and come on board with what works for sure with 5.1.x and up, TWRP. Problems have been coming up with CWM users so if you have one, that's were to start. Hopefully there's a 12-step program somewhere for y'all
Google apps addon:
Open GApps opengapps.org They have many options for you to choose from based on your needs. Updated daily.
>>>WARNING!!<<< The first time one installs Open GApps, you have to do it with a ROM update (or reinstall current ROM) AND manually wipe the system partition first. Then install the ROM and the GApps normally, then wipe Dalvik and Cache. After that, you can flash them anytime. (More info on Website.) ALSO, for now, don't install Webview as it might not work. There is an "Android System Webview" in the Play Store that will work.
I personally don't use GApps on my Daily Driver, I have a second S3 on Wi-Fi only that I put GApps on, and I use it to basically keep all my apk files up to date. When they get updated, I move the updated apk to my main phone!
I went to opengapps.org, went to Platform: ARM, then to Android: 6.0, and then to Variant: pico. Invisiblek made sure he warned me to do a clean install of the ROM, then Immediately flash the GApps package, then Wipe Dalvik and Cache, then boot. He said NOT to try to install ROM, then add GApps later otherwise bad things can happen! Obviously pick the flavor of GApps that suits your needs!
This page will be a work in progress, so please don't yell if something is missing. I just got the OK to share this with others and wanted to get it out there for you to enjoy. I have been playing with it for the last 24 hours and it is ROCK SOLID in my opinion. I haven't found any issues yet! Daily Driver for me for certain. If you have issues, please post them for discussion below!
Firmware and Modem thanks to Invisiblek
Download - MF1 firmware with NE1 modem Combo: http://www.invisiblek.org/firmware/d2/d2vzw_MF1_firmware_NE1_modem.zip (md5sum: 7a49bb13c1160f4d4a89488127684b5b)
And without further delay, the link you all want! : http://www.invisiblek.org/roms/cm-13.0/d2vzw/
BUGS:
Need to possibly load a different File Explorer to access SD Card (DoctorImpossible)
Access to camera is not functioning correctly (DoctorImpossible) *EDIT 11-23 build camera works, camcorder fix coming next build!
Outgoing text messages show "not sent", but actually send fine. (Stealth111)
Incoming phone calls do not show caller information (Stealth111)
**When you get your ROM installed and up and running, please be kind and put a small post with information about your install so we can get as much info gathered as possible. (ROM build you installed, Recovery type/version, Clean install, or Dirty (and if dirty, over what version did you flash), what GApps package you installed(exact one please) as well as when you installed it (if on same initial install as ROM, or differently). And lastly maybe the firmware/modem combo you are running. Thanks!
***IMPORTANT INFORMATION*** If you are going to flash to cm-13.0-20151121-UNOFFICIAL-d2vzw or later build, there have been some database changes. InvisibleK has provided a flashable zip file to accommodate nuking your old telephony and settings databases. Nandroid or backup files as needed if you want, as I seem to remember doing this with CM before, and clearing the database wiped texts and call logs I believe. This only needs to be done 1 time, the first time you flash any build from 11-21 on. After you have done this once, you are good to go moving forward, you will be upgraded to the new databases. If you do not flash the "Nuke_It" zip file, you will get phone FC's and a "No SIM Card" error message. So whether upgrading, dirty flashing or whatever, reboot into recovery, flash the ROM, and BEFORE you boot, flash the following zip!
Nuke IT Database Wiper
Profit!
Enjoy!
Stealth111
For Future Use
First
For Future Use
Second
Stealth111 said:
Second
Click to expand...
Click to collapse
First!! To download from here ... I see you've got an OpenGApps link, but it says a patch has to be used. I think I saw it mentioned on a thread somewhere (when I was tracking you to see where you got the build, which didn't lead me anywhere, but then I remembered our old friend invisiblek!)
And thanks a million for starting this thread!!!:good::good::good:
Master Cylinder said:
First!! To download from here ... I see you've got an OpenGApps link, but it says a patch has to be used. I think I saw it mentioned on a thread somewhere (when I was tracking you to see where you got the build, which didn't lead me anywhere, but then I remembered our old friend invisiblek!)
And thanks a million for starting this thread!!!:good::good::good:
Click to expand...
Click to collapse
I personally don't use GApps on my Daily driver, I have a second S3 on Wi-Fi only that I put GApps on, and I use it to basically keep all my apk files up to date. When they get updated, I move the updated apk to my main phone!
I went to opengapps.org, went to Platform: ARM, then to Android: 6.0, and then to Variant: pico. Invisiblek made sure he warned me to do a clean install of the ROM, then Immediately flash the GApps package, then Wipe Caches, then boot. He said NOT to try to install ROM, then add GApps later otherwise bad things can happen! Obviously pick the flavor of GApps that suits your needs! I'll add this bit up-top as well! I don't know anything about a patch though..
Stealth111
Stealth111 said:
I personally don't use GApps on my Daily driver, I have a second S3 on Wi-Fi only that I put GApps on, and I use it to basically keep all my apk files up to date. When they get updated, I move the updated apk to my main phone!
I went to opengapps.org, went to Platform: ARM, then to Android: 6.0, and then to Variant: pico. Invisiblek made sure he warned me to do a clean install of the ROM, then Immediately flash the GApps package, then Wipe Caches, then boot. He said NOT to try to install ROM, then add GApps later otherwise bad things can happen! Obviously pick the flavor of GApps that suits your needs! I'll add this bit up-top as well! I don't know anything about a patch though..
Stealth111
Click to expand...
Click to collapse
Thanks. I also misread the notation at OpenGApps, which said that need a "ROM" with the patch to allow Google services permissions. Also, there are some posts I've found about fixing permissions after boot then reinstalling GApps, but I won't post that here in case it misleads. I'll be the guinea pig as I've dloaded and backed up and ready to jump out the window!
Stealth111 said:
CyanogenMod and D2VZW: Marshmallow Love!
Firmware and Modem thanks to Invisiblek
Download - MF1 firmware with NE1 modem Combo: http://www.invisiblek.org/firmware/d..._NE1_modem.zip (md5sum: 7a49bb13c1160f4d4a89488127684b5b)
And without further delay, the link you all want! : http://www.invisiblek.org/roms/cm-13.0/d2vzw/
Enjoy!
Stealth111
Click to expand...
Click to collapse
Hello and thank you for providing us, S3 users, with the chance to try the long awaited Marshmallow ROM.
I downloaded the ROM a minute ago, but unable to download the MF1 firmware and NE1 modem, via link. I keep getting:
Error 404: Server be all like
Am I doing something wrong? If not... What next?
I just finished booting it. It seems pretty nice, and I only noticed a few things. The boot time was around half an hour as usual with lollipop. I did notice that there wasn't any camera app preloaded and I couldn't access my sd card through the file explorer (I chose not to format my sd card as internal and I gave the file explorer root access).
Ghost Protocol said:
Hello and thank you for providing us, S3 users, with the chance to try the long awaited Marshmallow ROM.
I downloaded the ROM a minute ago, but unable to download the MF1 firmware and NE1 modem, via link. I keep getting:
Error 404: Server be all like
Am I doing something wrong? If not... What next?
Click to expand...
Click to collapse
Yes, @Stealth111 you've copied the text from the CM12 OP but that won't work for links EDIT: that are truncated in a post. You have to manually copy the link, ex: right click on the link (if you're using a computer,) copy link location of whatever, and insert it manually.
Here is the working link: http://www.invisiblek.org/firmware/d2/d2vzw_MF1_firmware_NE1_modem.zip
On another note: I couldn't get my install to function past the first couple of screen in setup. com.android.phone fc avalanche stops all progress. Wiped and installed 3 times with no success. Running NE1 modem (after flashing and booting with ML1 the first time.)
Doctorimpossible said:
It seems pretty nice, and I only noticed a few things. . I did notice that there wasn't any camera app preloaded and I couldn't access my sd card through the file explorer (I chose not to format my sd card as internal and I gave the file explorer root access).
Click to expand...
Click to collapse
I also can't access the camera even after installing a new camera app. A new file explorer took care of my sd card issues however.
@ Master Cylinder, thanks for the heads up on the link, I have fixed it in the OP. For ****s and giggles, trying wiping and installing just the ROM, and then wipe Dalvic and Cache and see how it goes. Maybe a GApps issue. Also, goes without saying, make sure the MD5 from the download matches to verify you got a good DL..
@Doctorimpossible, glad you were able to sort out the access issue. I install ES File Explorer right away, so I didn't notice the issue. Good catch. These are the types of thing we need to sort out as quickly as possible to get this thing rolling! I will say that my initial boot only took about 5 minutes, but again, I did not load ANY GApps.
Master Cylinder said:
Yes, @Stealth111 you've copied the text from the CM12 OP but that won't work for links EDIT: that are truncated in a post. You have to manually copy the link, ex: right click on the link (if you're using a computer,) copy link location of whatever, and insert it manually.
Here is the working link: http://www.invisiblek.org/firmware/d2/d2vzw_MF1_firmware_NE1_modem.zip
On another note: I couldn't get my install to function past the first couple of screen in setup. com.android.phone fc avalanche stops all progress. Wiped and installed 3 times with no success. Running NE1 modem (after flashing and booting with ML1 the first time.)
Click to expand...
Click to collapse
So is this a hit or miss when flashing or not?
Ghost Protocol said:
So is this a hit or miss when flashing or not?
Click to expand...
Click to collapse
I have installed it on 4 devices myself with no issues. They were all with TWRP 2.8.7.0, clean installs, data wiped, ROM only install, and wiped caches before first boot. DoctorImpossible also has installed it and is up and running. I don't know what GApps he is running (if any). I will add to the OP asking people to put what they did/used for successful installs.
Stealth111 said:
@ Master Cylinder, thanks for the heads up on the link, I have fixed it in the OP. For ****s and giggles, trying wiping and installing just the ROM, and then wipe Dalvic and Cache and see how it goes. Maybe a GApps issue. Also, goes without saying, make sure the MD5 from the download matches to verify you got a good DL..
@Doctorimpossible, glad you were able to sort out the access issue. I install ES File Explorer right away, so I didn't notice the issue. Good catch. These are the types of thing we need to sort out as quickly as possible to get this thing rolling! I will say that my initial boot only took about 5 minutes, but again, I did not load ANY GApps.
Click to expand...
Click to collapse
I tried that just now for the 4th crapout, and there's no MD5 that I can see, but I'm gonna dload the ROM again to my lap and push it over and try again.
Ghost Protocol said:
So is this a hit or miss when flashing or not?
Click to expand...
Click to collapse
Of course! It's the first unofficial build for us.
Stealth111 said:
I have installed it on 4 devices myself with no issues. They were all with TWRP 2.8.7.0, clean installs, data wiped, ROM only install, and wiped caches before first boot. DoctorImpossible also has installed it and is up and running. I don't know what GApps he is running (if any). I will add to the OP asking people to put what they did/used for successful installs.
Click to expand...
Click to collapse
I used the GApps linked in the description with the stock option and flashed using TWRP 2.8.7.0. I rebooted from 5.1.1, factory reset, manually wiped system, flashed the rom, then flashed GApps, wiped the cache, rebooted, rebooted again and flashed xposed (which works by the way!)
Master Cylinder said:
I tried that just now for the 4th crapout, and there's no MD5 that I can see, but I'm gonna dload the ROM again to my lap and push it over and try again.
Of course! It's the first unofficial build for us.
Click to expand...
Click to collapse
Here is the MD5 from my file if it helps!
192BD2F6A83BCA791E0AFE9570134058
Doctorimpossible said:
I used the GApps linked in the description with the stock option and flashed using TWRP 2.8.7.0. I rebooted from 5.1.1, factory reset, manually wiped system, flashed the rom, then flashed GApps, wiped the cache, rebooted, rebooted again and flashed xposed (which works by the way!)
Click to expand...
Click to collapse
Yuppers! Exposed for Android 6
Thanks for the report!
Fingers crossed for Master Cylinder!!
Stealth111 said:
If you have recently downgraded firmware from 4.3 to 4.1.2, DO NOT flash the MF1 firmware. You'll brick your device!
Click to expand...
Click to collapse
how do i know if i have the right one ? it was a while since i rooted and flashed my phone.
thanks.
Sent from my SCH-I535
Jaws4God said:
how do i know if i have the right one ? it was a while since i rooted and flashed my phone.
thanks.
Sent from my SCH-I535
Click to expand...
Click to collapse
There's no way to tell, but you're probably okay. How did you flash your ROM? This is to warn people that the recent post for a procedure to "Downgrade" from their locked bootloader 4.3 OTA that all of us avoided because we were already rooted, etc. This new method has only been around since this summer, so if you have been rooted in the years category, you're probably okay.
Besides, it may even not be a problem if one had done that new method.
Master Cylinder said:
There's no way to tell, but you're probably okay. How did you flash your ROM? This is to warn people that the recent post for a procedure to "Downgrade" from their locked bootloader 4.3 OTA that all of us avoided because we were already rooted, etc. This new method has only been around since this summer, so if you have been rooted in the years category, you're probably okay.
Besides, it may even not be a problem if one had done that new method.
Click to expand...
Click to collapse
all i rememeber was downgrading from h2 to h1 to get root access.. then flashed CM12.1 on top of that ..
Sent from my SCH-I535