Database Info

[Q] How to get new language!

Hi guys!
Recently i buy this Photon Q 4G LTE Sprint to my wife's birthday.
It's a wonderfull device with a nice hardware, but the best is the external keyboard (She likes it, because his old device was Motorola dextr, and she was used to), but we're from brazil and my first difficulty was to find a rom that support drivers without bugs.
So here i was: My first try was MIUI. I unlocked my bootloader, rooted and installed TRWP. Didi Backup, formated and installed MIUI, :good:
First i tryed with Kernell the UFO developed for it, and the device don't boot. After i tryed just the rom, but it has no modem or wifi. So i flashed up the stock rom modem img and worked fine.
But apks like "retrica" doesn't work with it, bringing black photos and others apks made for instragram. I love this rom and i have installed in my Xperia Play. It works perfect, but in this device have a lot of bugs, so i give up.
I know how to use it with bugs, but not my wife. Then i had to try another one.
I downloaded Cyanogenmod CM10.1, CM10.2, CM11 nightly, snapshot. Then after try all "Xt897" roms, i tryed all "moto_msm8960".
I can't get in any of this roms make my wifi or 3G work. I believe that modem is not compatible. Even if i tryed to flashed stock modem after, i still had no signal at all. No IMEI, no MAC Address, nothing. :crying:
This device have few alternative roms, so i decided try to translate the rom with less bugs at all. I picked up the stock rom JellyBeans 4.1.2, but this was my second failure. A language patch is something that you don't find in market, and to disassembly entire rom and work in a translate is something beyond my knowledges.
So i have an answer to someone that know how to do a fix patch to wifi in cyanogenmod(Specific "cm-11-20140518-NIGHTLY-moto_msm8960.zip" ), or someone good in translate rom, or input a language in stocked rom, like The Solutor did in " [Full ICS ROM] Multilanguage/Toggle2g /STK/Tethering" (but the rom he used was 4.0.4 and it have bugs).
I will be grateful for any help. :fingers-crossed:

Hmm, what's the language you want (CM11 already have lots of them - not in the list?), and what WiFi/3G problem are you having? And you also failed to RSD the phone back to stock?
My recommendation is you first sort the RSD thing out and get the phone back to stock 4.1.2, and flash everything from that onwards. Assuming that you don't do anything wrong in the process, you should have no quirks with WiFi/3G.
Sent from Google Nexus 4 @ CM11

Try MoreLocale2 for the stock ROM language issues.
As for the CM issues... I agree with Andy, if it works in stock form, it "should" work on CM - at least that has been my experience.
You are clean wiping / factory resetting before or after flashing CM yes? I see you have done this step for MIUI, so I am thinking that you have already done this step...
If you have, can you provide logs from CM if the wiping/RSD'ing doesn't work?

Thx for help guys...
AndyYan - The language i need is Portuguese(Brasil) and it has on CM 11 and MIUI.
I did it as you said. I downloaded stock from here:
http://sbf.droid-developers.org/phone.php?device=3
Rom version: Android 4.1.2 - Blur_Version.98.10.5.XT897.Sprint.en.US)
And flashed by RSD.
Everything ok till here. No errors, nothing wrong. Wifi working as well, and the network.
My MIUI was taken from here: http://forum.xda-developers.com/showthread.php?t=2444449 (GSM one).
Cool rom, it has wifi and network, but camera bugs with some apks. For me ok, but not for my wife. So this rom was discarded.
CM i dwonloaded from here: http://download.cyanogenmod.org/?device=moto_msm8960
The last one was: cm-11-20140521-NIGHTLY-moto_msm8960.zip (i tryed all of then "XT897" and "moto_msm8960", but none of them could get my network working. No wifi, no IMEI, no MAC, no wifi).
CM was my hope, because it has my language, but in all tries i did the wipe in cache, dalvik, system, factory, even internal memory, before installing, and cache or dalvik after flash. I tried this in all (tried not wiping too) and still has no modem.
After this, just for try, i flashed stock modem "NON-HLOS.bin". Still got no modem in any CM roms.
arrrghhh - i did try "MoreLocale2" for the stock rom, and "Set Locale and Language" (and more). This softwares did a nice job for keyboards and apks, but system stays intact in english. It need to be a real translation for my wife.
My guess is that this issue can be easily solved.
If all JB roms have the same system(at least for "moto_msm8960" processor kind ).
This ROM is generic for Motorola Atrix HD, Electrify M, Photon Q, RAZR HD, and RAZR M right?
Razr HD is a type of phone that came to my country.
Is it possible compile a system from Brasil career stock, for this phone with modem and anything else from my stock rom? Does it will crash my phone?

Please provide logs from the latest build of CM after booting and attempting to engage/connect to wifi.

Logs??
Sotty about my doubt, but i don't know what kind of logs do you want(i'm not used to).
Logs from TWRP in instalation?
This is easy. Installation was made with no errors and succesfully.
Does CM made logs itself??
If does, i dont know how to get them. Please send me a link.

Skymidt said:
Sotty about my doubt, but i don't know what kind of logs do you want(i'm not used to).
Logs from TWRP in instalation?
This is easy. Installation was made with no errors and succesfully.
Does CM made logs itself??
If does, i dont know how to get them. Please send me a link.
Click to expand...
Click to collapse
CM does create logs. If you're not familiar with them, the easiest way is to use an app from the Play Store... which I'm not sure how you will manage without wifi or mobile data, and I assume you are not familiar with adb.
I can go thru the detail, but it's a bit involved. Perhaps this thread will help you?
Once you know how adb works, there's actually an easier method than using adb logcat to output to a file - there are logs stored in '/data/logger'. So:
Code:
adb root
So you can have the permissions to pull the files, then pull them:
Code:
adb pull /data/logger
Will pull all of the log files to wherever your command prompt is. If you 'cd' (change directory) to your desktop, doing the adb pull will send all the log files to your desktop.
Let me know if you have any questions, good luck.

Logs from Adb
Yeap! I'm familiar with ADB!!
(i'm not expert in it, but i already did something with that...)
I don't know exactly what are you lookin for, so i did two logs.
First a complete boot:
Code:
adb reboot system
adb logcat -v long > boot_log.txt
And one for especific modem log from boot
Code:
adb reboot system
adb logcat WifiStateMachine:E *:S -v long > just_wifi_error.txt
(I believe this this won't help u a lot?!)
The first one is the most complete solution for this and have all the boot infos, errors and other things.
If am i wrong please say the correct command to use.

I forgot something...
In filemanager i can't access internal storage.
It shows /storage/emulated/0, and points to nothing.
If i'm right, this was a well know bug on CM 10.2, which supposedly been fixed in CM 11 right?!
I think that information can help to solve this bug...

Please try the adb pull command I sent... Those logs are not very helpful, and quite difficult to read.
However, I have a feeling if you use RSD Lite to flash everything back stock, confirm it works, then start with the latest CM, I'd be curious if it works.
Also, someone mentioned they needed to install the CM10.2 snapshot before going to CM11 - or else BT and wifi did not work.

Eureca...
That is something that i didn't tried! I'd never flashed CM 10 in first!!!
I'm downloading "cm-10.2-20131102-SNAPSHOT-M1-xt897.zip ".
Fisrt i'll flash stock "Blur_Version.98.10.5.XT897.Sprint.en.US" with RSD.
Then fastboot "logo.bin" (to avoid warning unlocked), and TRWP(my stock have a original recovery that can't install CM. I can edit XML, but to cleanse my conscience i'll let this way).
After i'll install "cm-10.2-20131102-SNAPSHOT-M1-xt897.zip" with TRWP and boot with this one.
Then i'll flash "cm-11-20140526-NIGHTLY-moto_msm8960.zip ".
But i'll have to do this at night(it's 12pm here), because i'm working today.
If that don't work i'll pull the log that you said here, but I come back to thank.

Same problem
I confess I was hopeful in that case you said to flash first the CM 10.2.
But again failed. I tried two ways:
In both I tried to install the Snapshot CM 10.2, then the CM 11.
There is no way that cell boot with "CM 10.2" in any case. That saty on boot animation for several time(i waited 30 minutos each).
In the first I downgraded to version 4.0.4 stock to see if the modem worked.
After that i flashed CM 10.2 that stood in boot animation, then CM 11 booted without modem signal (no wi-fi, no signal).
I taked the log for that version (attachment named log_4.0.4.7z)
On the second attempt, I used the default stock 4.1.2.
After CM 10.2 which was stucked on boot animation again, then CM 11 again booted without modem signal (no wi-fi, no signal).
I taked the log for that version (attachment named log_4.1.2.7z)
Strange thing happened on both CM 11 boot. When the system's load, it shows a message "The clock stopped". This is strange thing for me.

Can you wait for CM10.2 to boot...? There is a fsck process which sometimes takes quite a long time to boot.
Also, for your FC issue - you are clean flashing the ROM everytime? You are doing a factory reset everytime you flash a new ROM?
Edit - looking at your logs, I don't think the fsck is the issue... something is causing the CM10.2 boot to die over and over. Please try clean flashing...

I clean everything before.
Yeap. What do you call a clean flashing?
Everytime i flash some ROM, i do factory reset, clean cache and dalvik.
The ROM is flashed on a clean state of the stock one. Is this the clean you are talking about?
CM was taken about 30 minutes to boot, and yet don't load system.
This is why i stop that and flash CM 11 over it.
Is this time bigger than that? How long your cell take to boot this CM 10.2?

Skymidt said:
Yeap. What do you call a clean flashing?
Everytime i flash some ROM, i do factory reset, clean cache and dalvik.
The ROM is flashed on a clean state of the stock one. Is this the clean you are talking about?
CM was taken about 30 minutes to boot, and yet don't load system.
This is why i stop that and flash CM 11 over it.
Is this time bigger than that? How long your cell take to boot this CM 10.2?
Click to expand...
Click to collapse
Yes, factory reset == clean flash.
As for the long boot, I'm not sure the fsck is your issue - basically there is a process which runs a disk check, and sometimes this will make the boot take quite longer than usual. I can't say how long, I've never personally experienced the issue.
However, the fact that CM10.2 isn't booting is a little disturbing. I've heard some people report 45-60 mins... can you do me a favor, charge up the phone, and try to let it boot for at least 90 minutes?
If at the 90min mark it still hasn't booted, pull logs and post them.
Thanks.

The logs contain references to apps that are present only in stock firmware.
That means the CM boot is actually not happening in a clean environment (the data wipe/factory reset in TWRP hasn't worked as it should?).
Please try to use OpenRecovery 2.09 instead of TWRP (as OR is the recovery I personally use and watch for possible bugs) to wipe the device and to install CM11 - http://forum.xda-developers.com/showthread.php?t=2211579&page=10
When installing CM in recovery, you will probably also want to install the gapps package - http://wiki.cyanogenmod.org/w/Google_Apps
Btw., CM11 expects the baseband (modem) and other partitions the be at the 4.1.2 stock level. Experiments with 4.0.4 are useless.
Please post the logs from CM11 boot.
You will need to enable the logger under CM11 by
Code:
su
setprop persist.log.aplogd.enable 1
in Terminal app or ADB shell, it's not enabled on CM11 by default.

Links are broken
Hi... My TRWP version is "openrecovery-twrp-2.7.0.1-asanti_c.img".
Something is not ok with this one. Sometimes this one format the cache, sometimes not.
I have to do it a lot of times and when i try to format data partition, this just reload the TWRP.
I want to install this one that you said, but those links in the post you sent are broken.
Can you please send me another one?

Skymidt said:
Hi... My TRWP version is "openrecovery-twrp-2.7.0.1-asanti_c.img".
Something is not ok with this one. Sometimes this one format the cache, sometimes not.
I have to do it a lot of times and when i try to format data partition, this just reload the TWRP.
I want to install this one that you said, but those links in the post you sent are broken.
Can you please send me another one?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=48551561&postcount=75
I'm on an older version of TWRP, and it has never failed me... that's a shame really. I'll try to update and see what's what. In the meantime, flash OpenRecovery I linked above ^^.

Skymidt said:
I have to do it a lot of times and when i try to format data partition, this just reload the TWRP.
Click to expand...
Click to collapse
TWRP 2.6.3.x should also work properly.
@arrrghhh, so you see it's not just me having the "wiping /data reboots the recovery" problem... I've already sold my PQ (might buy a new one in the future), but please do help let this problem be known to whoever's developing TWRP for us
Sent from Google Nexus 4 @ CM11

I can't believe it works
Unbelievable! :laugh:
This very simple solution worked for me.
My TRWP did not work right.
He said he had done successfully in cleaning the cache and manufactures, but did not.
I downloaded the link you guys sent me and it worked on the first try.
Not needed before installing CM 10.2. Already installed in the first CM 11, has worked with modem and everything. Now I can configure the GSM network my country and language of the country for my wife (PR-BR).
I want to thank the efforts of user @ AndyYan to respond, the attention given by the user @ Arrrghhh teaching me with patience, and the solution given by the user @ kabaldan. :victory:
You are awesome for this forum. Thanks for everything.
If you still want the log I get, but I think with everything working, you guys should already know the outcome.

[Q&A] [ROM] **crDroid Lollipop 5.0.0** [20141130]

Q&A for [ROM] **crDroid Lollipop 5.0.0** [20141130]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] **crDroid Lollipop 5.0.0** [20141130]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

thanks,great job,but no % battery in the notif barre ?

Just downloaded crDroid Lollipop 5.01.
Great Job

Built in root
It says the ROM comes pre rooted but after several flashes of the ROM it still wouldn't work.
How do I fix this?
Thanks in advance

Yep.. I have been using this as a daily driver now for more than a week. Super Stable.
Love this ROM ..........
---------- Post added at 01:10 AM ---------- Previous post was at 01:02 AM ----------
Karel VH said:
It says the ROM comes pre rooted but after several flashes of the ROM it still wouldn't work.
How do I fix this?
Thanks in advance
Click to expand...
Click to collapse
Try flashing the latest SuperSu in this thread.....

You rock man.

Just downloaded this release. Wow Quick......

Great Job...Already Installed without any issues..... Thanks

Why don't restore app using titanium?
Thanks

just installed crDroid - Bacon 5.0.1
Hey guys, just installed crDroid on my OPO, love it so far! Was using LiquidSmooth before but didn't like how everything was dark!

Thanks for the ROM! However the bluetooth connection seems buggy. It keeps disconnecting and reconnecting my bluetooth headset (2 of them) consistently.

email
Great ROM!!
Flashed this rom yesterday and had no problems
I just can't get any of my email-accounts to sync (except gmail of course). Anyone else with this issue?

i recently instaled cRdroid in my chinesse OPO and i have 2 problems.
First when my phone is locked with the screen off sometimes i touch the power button and the screen doesnt turn on, double tap doesnt work either, the solution is hold the power button till the phone goes off or to plug the usb cable to my pc.
2nd problem is that sometimes ramdomly when i leave a wifi network the data traffic doenst come back and i see a exclamation mark (!) in the signal level.
btw sorry for my english.

Every time downloading a 250mb+ ROM and flashing it would be a prob due to poor internet facilities in India...
It would very helpful if OTA is added so that only changes can be flashed via recovery

It seems that no option for ejecting External SD Card or OTG USB Storage in Settings. How can I fix it?
Thanks in advance.

Hello all!
I wanted to download crDroid, and AK Kernel. I'm rooted, unlocked, custom TWRP recovery, everything you can ask for... I've already flashed a new ROM (I have Blisspop right now) and I wanted to try out crDroid w/ AK Kernel. I could do it by myself, but I don't want to mess up/go into bootloop. To be honest, I'm still a noob and have no idea what a Kernel is... so is anyone willing to help me step by step to install all of these on my OPO? Obviously I know how to install new ROMS (backup (if you want), clean wipe, cache, flash rom, gapps, all that good stuff)), but I'm worried on how to do it with a new kernel (I'm also trying to save battery and I heard this is a good combo. my battery life is TERRIBLE.)
Thanks a ton!
- Joe

...
---------- Post added at 04:27 PM ---------- Previous post was at 04:21 PM ----------
"Unfortunely, phone has stopped" ?!?

error executing updater
Trying to install the crdroid-5.0.2-20150208-bacon file with TWRP 2.8.4.1 get 'e:error executing updater binary in zip.' did a complete system wipe to nothing, same error.

SensualPuma said:
Hello all!
I wanted to download crDroid, and AK Kernel. I'm rooted, unlocked, custom TWRP recovery, everything you can ask for... I've already flashed a new ROM (I have Blisspop right now) and I wanted to try out crDroid w/ AK Kernel. I could do it by myself, but I don't want to mess up/go into bootloop. To be honest, I'm still a noob and have no idea what a Kernel is... so is anyone willing to help me step by step to install all of these on my OPO? Obviously I know how to install new ROMS (backup (if you want), clean wipe, cache, flash rom, gapps, all that good stuff)), but I'm worried on how to do it with a new kernel (I'm also trying to save battery and I heard this is a good combo. my battery life is TERRIBLE.)
Thanks a ton!
- Joe
Click to expand...
Click to collapse
You just need to let the room boot fully once, then you can reboot into recovery and flash both the latest AK kernel available and the UKM script if you want to use synapse (kernel control app)
In terms of what to tweak, poking around the AK thread would probably be worthwhile, I'm sure a ton of people have posted their setups.
If you dirty flash Rom updates, the stock kernel will overwrite the custom one. I usually try the stock kernel for a bit (at least a few battery cycles) to see what it's like before flash G something though.

embmiphone said:
Trying to install the crdroid-5.0.2-20150208-bacon file with TWRP 2.8.4.1 get 'e:error executing updater binary in zip.' did a complete system wipe to nothing, same error.
Click to expand...
Click to collapse
I am also having the same issue please someone help

[Q&A] [COLLECTION] Somcom3x's Experimental Corner

Q&A for [COLLECTION] Somcom3x's Experimental Corner
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [COLLECTION] Somcom3x's Experimental Corner. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Multirom TWRP
Somcom3X said:
Hello there!
Welcome to my custom build thread. Here you'll find most of the things I am currently working on.
This is where all of the unofficials/experimentals will go! Enjoy!
Recovery downloads:
TWRP-v2.8.3.0 (Loads much faster/with full selinux support)
TWRP-v2.8.2.0
TWRP-v2.8.0.0 (No throttling commits within)
TWRP-v2.8.0.0
CyanogenMod Unofficial Downloads (Newest to Oldest):
cm-12-20150107-UNOFFICIAL-peregrine
cm-12-20150105-UNOFFICIAL-peregrine
cm-12-20150103-UNOFFICIAL-peregrine
Older CM Builds:
cm-12-20150103-UNOFFICIAL-peregrine
cm-12-20141229-UNOFFICIAL-peregrine
cm-12-20141227-UNOFFICIAL-peregrine
cm-12-20141226-UNOFFICIAL-peregrine
cm-12-20141223-UNOFFICIAL-peregrine
cm-12-20141217-UNOFFICIAL-peregrine
cm-12-20141214-UNOFFICIAL-peregrine
cm-12-20141213-UNOFFICIAL-peregrine
cm-12-20141211-UNOFFICIAL-peregrine
cm-12-20141207-UNOFFICIAL-peregrine
cm-12-20141130-UNOFFICIAL-peregrine
cm-12-20141126-UNOFFICIAL-peregrine
cm-12-20141123-UNOFFICIAL-peregrine
Enjoy!
Click to expand...
Click to collapse
Hi Somcom3X, do you have any plans to build a Multirom capable TWRP recovery? I know this would also need an appropriate kernel with kexec to work. I have seen one for falcon, but not peregrine.

Can any one confirm SD support with the latest twrp? Does it format cache properly?

CM auto-update not working
my cm12 can't update automatically,
stops in main menu ...
someone else remark the same problem?

Please compile!
2.8.5.0 is out...
and repair the problem witch cm12 ota-updater
... Waiting for someone who compile it for peregrine...

Thankyou for TWRP-v2.8.3.0. My Moto G LTA (xt1040) Loves it!! (now i can use the sd card and OTG)
(hope you keep with future updates of TWRP)
Xplorer4x4: Yes works the SDcard. Disabling the Mttp suport on mount options, fix the problem .

2.8.6.0 is possible... But nobody build it for peregrine...
2.8.3.0 works not automatically with cm12 at my peregrine...
send with tapatalk...

"Google Play services stopped" and "android.process.acore stopped", these messages appear to me , and I can not open all applications

Thank you for this rom
..
---------- Post added at 02:18 AM ---------- Previous post was at 02:14 AM ----------
Excellent rom, so far it has solved many problems. I tested it with a lot of videos which looked slow in CM12 so far I haven’t had any closing of apps, I compare it about speed with Google Play Edition 5.1 XT1032. Excellent job, but I still find this line in the file built.prop, use.voice.path.for.pcm.voip=true, which has to be deleted on each update of CM12 for calls via WhatsApp, Line, Viber, etc. Again, good job and thanks.

MarcoAurelioBrasil said:
"Google Play services stopped" and "android.process.acore stopped", these messages appear to me , and I can not open all applications
Click to expand...
Click to collapse
This is because of Google contacts being messed up.
Disable, erase data and enable back did it for me.

mcastagnaa said:
This is because of Google contacts being messed up.
Disable, erase data and enable back did it for me.
Click to expand...
Click to collapse
Tnx,this was because I did a dirty flash, after I made a wipe data, sistem, cash, dalvik cash and internal , everything worked fine !

I just updated my XT1040 with the recently leaked OTA for 5.1 and wanted to root it again, so I used the TWRP-v2.8.3.0 in this thread.
as I went into recovery I was scared because yet again that now traumatic weird horizontal transparent line happened. From trying to get CM12 to work multiple times and failing I thought it meant I had ****ed up. Fortunately the recovery seemed to work fine, SD card and OTG visible and all. What caused this?

TWRP and PA and on Peregrine XT1039
TWRP ver.2.8.3
Paranoid Android ver.5.1
Thank you to all the developers they work together very well and give full access to sd card (TWRP).
Somcom3X many thanks for your work ...

Working fine on xt1039

The latest recovery is working on my XT1039, but I can only install zips via flashify - trying to install directly from TWRP causes my phone to crash completely. I also cannot access recovery from the bootloader, yet I can access it with either "adb reboot recovery", or advanced rebooting into recovery.
This is fine, although flashify only offers 3 flashes per day - which was a pain, but the latest Sabermod version no longer has a Google play services glitch so this is alright. P. S. This is on 5.1, which you say you don't support.
Good job for having a working recovery, I hope you can fix those two glitches!

Hey I've been using twrp for almost a year now but 3 days ago it stopped succesfully updating cm12.
I don't know whether that is a twrp issue or cm12 so I flashed the latest twrp from this thread without encryption.
The same error still occurs though.
Code:
E: Error executing updater binary in zip '/sdcard/cmupdater/cm-12.1-20150724-NIGHTLY-peregrine.zip'

tsaber said:
Hey I've been using twrp for almost a year now but 3 days ago it stopped succesfully updating cm12.
Click to expand...
Click to collapse
On peregrine you need bootloader 41.1A since
https://github.com/CyanogenMod/andr...mmit/50bd8f55e8c14b8a22fdf646e186dc279ddb08e9

sevenrock said:
On peregrine you need bootloader 41.1A since (SNIP)
Click to expand...
Click to collapse
Where do you get and how do you install the new bootloader?
I found a thread with a Windows-only tool to automatically install an updated bootloader for falcon or peregrine devices but do not have a Windows computer to use it.

Partition SD Card button is missing
Hi,
I flashed TWRP 2.7.8.0 on my XT1039. Everything seems to work except that there is no "Partition SD Card" button in the Advanced screen (there is a void where the button is supposed to be). TWRP sees the SD just fine and I had no problems making a backup on the SD card. Why is the button missing/hidden?
Regards,
-Roger

[ROM] Mokee 5.1.1 STABLE (Daily Driver)

First Thing First : I'm not the developer of this ROM. Just Sharing "MY" experience
It's been a long time Mokee builds are available for Mi 4i. I've been using it since 2nd last build (more than 10 days) and currently on latest built i.e. 25th Jan 2016. And I can say that it's Stable.
What's Working :
Everything, except volume rocker keys on earphone.
Highlights:
DT2W
D2TS
Ambient Display
Not even a single FCs or Reboot since installation (more than 10 days now)
CoC is working fine
FB is working fine
More than 24 hours backup (With normal use, NO intensive gaming and ~4 hours SOT)
Installation Instruction (Which I followed, You can go with normal way):
1. Flash MIUI ROM 5.6.11 (I tried to install on 7.1.1, it keep on rebooting. Tried everything, but no luck)
2. Flash TWRP as permanent Recovery
3. Root using SuperSU
4. Wipe everything (but ROM & Gapps Folders)
5. Flash ROM
6. Reboot to System (No need to set-up anything, just do next next)
7. Go to Recovery, Flash Gapps
8. Reboot to system (Again no need to set-up anything, just do next next)
9. Factory Reset (From settings, NOT from recovery)
10. Set-up now
11. Enjoy and All the Best
I know it's painful the way I set-up ROM, but yes I'm not facing any problem at all (Fingers-crossed ). We three colleagues are using it. So it's tested now (you can say)
I've only one phone and I'm using it as a daily driver.
Downloads:
ROM
Gapps : pico version

Enjoy the New ROM guys

this rom is still stuck in LP. was hoping for MM already

ajaxcbcb said:
this rom is still stuck in LP. was hoping for MM already
Click to expand...
Click to collapse
You are very much correct my friend, but again it's a very good alternative for :
1. Those who don't wanna be on MIUI.
2. Struggling to find a CM daily driver.
//TM

good to know. I couldn't take the constant reboot from Remix ROM. Just installed Mokee yesterday. So far so good. Keep my fingers crossed.

getting very high wakelock on *alarms* on any mokee rom

Yeah this is the most stable custom rom for mi4i ...
- official
- update OTA almost every week ..

Can anyone verify if fast dormancy is present in the rom? either through wakelocks or logcat(it should say fast dormancy service or otherwise)

Is ambient display working on this rom?

Hey I am not able to do it. I tried it several times, but every time it says that ERROR IN UPDATER BINARY ZIP.......I am not able to flash it. Help me.

Rajat Naik said:
Is ambient display working on this rom?
Click to expand...
Click to collapse
Yes, Check OP.

xposed support?

lineoxkun said:
xposed support?
Click to expand...
Click to collapse
works, no problem!

imagine92 said:
works, no problem!
Click to expand...
Click to collapse
Nice! Definitely will try this ROM tonight! Thanks OP for sharing [emoji1]
Sent from my MI 4i using Tapatalk

What's your SOT on MIUI 7 with similar type of use?

not happening please help. i tried flashing mokee 5.1 on my mi4i but there are some errors occuring everytime i try to do it. help on this.

sik619 said:
not happening please help. i tried flashing mokee 5.1 on my mi4i but there are some errors occuring everytime i try to do it. help on this.
Click to expand...
Click to collapse
Use twrp 2.8.7
http://forum.xda-developers.com/showthread.php?t=3204594

Is it smooth as any other moto g mobile lolipop version...becoz i always get a feel that miui is laggy..i never install a custom rom before

hey i flashed mokee and the gapps as well...but now its rebooting repeatedly. there comes this screen with welcome and the language but cant click next option..i dont know why. help me

sik619 said:
hey i flashed mokee and the gapps as well...but now its rebooting repeatedly. there comes this screen with welcome and the language but cant click next option..i dont know why. help me
Click to expand...
Click to collapse
I suggest you to use miui 6.6.10.0 glob stable before flash mokee rom

[Completed] Bootloop problem on Samsung Galaxy Tab 2 10.1 (P5100)

Hello!
I have the following problem and after countless searches over many forums I ended up finding no answer:
About 4-5 months ago my P5100 started to restart itself after 1 or 2 minutes of functioning properly (restarts even faster if i try to connect over Wi-Fi or install an app). I thought that if I leave it for a while everything will be ok, it wasn't the case so I started trying to fix it. Before I go on I mention that my P5100 was rooted , running CWM version 5.5 and CM10(10.1.3), i haven't messed with the rom, recovery, firmware etc. for more that one year and a half so it started all of a sudden. I tried everything starting from simply updating the CM version to ADB commands and finally flashing back to the stock firmware with Odin. The wipe data/factory reset didn't work neither in recovery nor commands, I even tried to delete everything via Internal Storage in my pc through USB. Every time it reverts itself to the point it was left before although everything seemed to work just fine no errors or so. It doesen't remember after reboot any setting I made or any app that i installed(if I manage to install one) it is like i didn't do anything at all to it. :crying:
Many thanks for taking your time to read my thread and maybe help me:laugh:

warriorsers said:
Hello!
I have the following problem and after countless searches over many forums I ended up finding no answer:
About 4-5 months ago my P5100 started to restart itself after 1 or 2 minutes of functioning properly (restarts even faster if i try to connect over Wi-Fi or install an app). I thought that if I leave it for a while everything will be ok, it wasn't the case so I started trying to fix it. Before I go on I mention that my P5100 was rooted , running CWM version 5.5 and CM10(10.1.3), i haven't messed with the rom, recovery, firmware etc. for more that one year and a half so it started all of a sudden. I tried everything starting from simply updating the CM version to ADB commands and finally flashing back to the stock firmware with Odin. The wipe data/factory reset didn't work neither in recovery nor commands, I even tried to delete everything via Internal Storage in my pc through USB. Every time it reverts itself to the point it was left before although everything seemed to work just fine no errors or so. It doesen't remember after reboot any setting I made or any app that i installed(if I manage to install one) it is like i didn't do anything at all to it. :crying:
Many thanks for taking your time to read my thread and maybe help me:laugh:
Click to expand...
Click to collapse
Hello and welcome to xda-assist,
your device has a quite good supported device specific forum
https://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified
with even twrp 3.0.3 and pretty decent marshmallow builds, even official LineageOs nightly support started this week..
https://download.lineageos.org/espresso3g
Twrp 3.0.3
https://www.androidfilehost.com/?w=files&flid=48848&sort_by=date&sort_dir=DESC
If want to sort out your present issue with your slightly outdated software instead you'll have to visit your device specific help thread
https://forum.xda-developers.com/galaxy-tab-2/help
or general help section
http://forum.xda-developers.com/android/help
Good luck

Sam Nakamura said:
Hello and welcome to xda-assist,
your device has a quite good supported device specific forum
https://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified
with even twrp 3.0.3 and pretty decent marshmallow builds, even official LineageOs nightly support started this week..
https://download.lineageos.org/espresso3g
Twrp 3.0.3
https://www.androidfilehost.com/?w=files&flid=48848&sort_by=date&sort_dir=DESC
If want to sort out your present issue with your slightly outdated software instead you'll have to visit your device specific help thread
https://forum.xda-developers.com/galaxy-tab-2/help
or general help section
http://forum.xda-developers.com/android/help
Good luck
Click to expand...
Click to collapse
Thank you very much i will proceed to those forums and seek further asistance :victory: