Database Info

[6/08/13] CM9 for HTC Merge [Kernel: 2.6.35 EV]

CM9 for HTC Merge. I'll keep this short and simple since there are very few people using the HTC Merge.
Sources​
Device tree: https://github.com/jianC/android_device_htc_lexikon/tree/ics
msm7x30-common tree: https://github.com/jianC/android_device_htc_msm7x30-common/tree/ics
Kernel: https://github.com/jianC/android_kernel_htc_msm7x30/tree/cm9
Vendor: https://github.com/jianC/android_vendor_htc/tree/cm9
Patches needed for compile:
http://review.cyanogenmod.org/#/c/13285/
http://review.cyanogenmod.org/#/c/13317/
http://review.cyanogenmod.org/#/c/13564/
Click to expand...
Click to collapse
Code:
[B]Working[/B]
GSM/CDMA
Wi-Fi
Audio
Phone Calls
GPS
Bluetooth*
Hardware Acceleration
SDCard
USB Mount
*Not fully tested/partially working
Code:
[B]Not Working[/B]
Camera/Camcorder ([URL=http://pastebin.com/Ky7Ea6sa]logcat[/URL])
Downloads​​cm-9-20130806-UNOFFICIAL-lexikon.zip - 128.56 MB
Gapps may be attained from goo.im/gapps
Click to expand...
Click to collapse
Screenshots​
​
Click to expand...
Click to collapse
Credits: Cyanogenmod, Neopeek Team, United Dev Team, Evervolv Team, TwistedUmbrella, Preludedrew, Elginsk8r, Faille13 and everyone who contributed!
Questions and feedback are appreciated! Thanks for looking.

Great job and progress! I will flash and try to work on what is causing the camera / camcorder issue. I'd say there is some firmware that is missing that may be needed for it to work. Appreciate the hard work and the great job you are doing! Keep it up!!
**Edit: Just checked those patches needed for the compile and seen they all related to the camera functionality on the device. I haven't checked the device tree yet to see what changes are needed to get a fully functional rom but I will be trying to help work on straightening the problems out with you

I hope this project turns out well. My brother just got the phone because he missed physical keyboards. I'll definitely try it when the Camera is working.

Thanks a lot for continue to support our phone. Very used to a physical keyboard and do not want to change the phone.
I hope will soon be able to use CM 10.1
Great job!

linuxsociety said:
Great job and progress! I will flash and try to work on what is causing the camera / camcorder issue. I'd say there is some firmware that is missing that may be needed for it to work. Appreciate the hard work and the great job you are doing! Keep it up!!
**Edit: Just checked those patches needed for the compile and seen they all related to the camera functionality on the device. I haven't checked the device tree yet to see what changes are needed to get a fully functional rom but I will be trying to help work on straightening the problems out with you
Click to expand...
Click to collapse
has the Camera issue been fixed????

[ROM][5.1.1][Experimental] CyanogenMod 12.1 | Linaro 4.9 | Code Review

Overview:
Code:
[B]Experimental CyanogenMod 12.1 compiled with [URL="http://releases.linaro.org/14.10/components/android/toolchain/4.9"]Linaro 4.9 (14.10) Toolchain[/URL].[/B]
This is CyanogenMod 12.1 built straight from source with Code Review
cherry-picks and my own custom device trees and kernel.
CDMA carrier setup:
The following only needs to be done once to allow init to properly setup your carrier specific system properties.
This will set ro.boot.carrier to your specific carrier identifier and will persist through future flashes of this ROM.
Code:
From the bootloader issue the following commands depending on your carrier:
'fastboot oem config carrier verizon' (Verizon)
'fastboot oem config carrier pageplus' (Page Plus)
'fastboot oem config carrier reliance' (Reliance Mobile)
'fastboot oem config carrier sprint' (Boost Mobile)
Builds:
CM-12.1 06-08-2015 (MD5: (2414f09586228eb94bcda47c1f149ed0)
MMS Flashable Zip Fix Thanks @starkly_raving @Alberto97
TK Gapps Mini Modular 5.1 (05-30-2015)
Build Archives
Source Code:
codyf86/android_device_motorola_falcon
codyf86/android_device_motorola_msm8226-common
codyf86/android_kernel_motorola_msm8226 (Stock CM kernel Not even stock anymore kernel xD)
Code Review Cherry-Picks: (Latest build)
healthd: Use android blue for charge percentage
PowerManagerService: Fix updating of mUserActivitySummary
Add option to set default custom function to button recents (1/2)
Add option to set default custom function to button recents (2/2)
cmsdk: do not crash system if CustomTileListenerService isn't present
Note: When Items drop off the above list 9/10 they have been merged.
Changelog:
Code:
I don't believe in change logs; I believe in Github.
Please look above at the Code Review and also through
the source code commits to see what's changed.
The proof is in the [STRIKE]pudding[/STRIKE] Github.

Nice man ... Will be giving this a shot. Do you have a bug tracker set up or do you want logs and reports posted here?

Yummy. Also trying this out for sure.
Edit: Sub'd, Muuahahaha!....Oh.

starkly_raving said:
Nice man ... Will be giving this a shot. Do you have a bug tracker set up or do you want logs and reports posted here?
Click to expand...
Click to collapse
Feel free to post logs / bugs here. Mainly have time to build after work on weekdays. On the weekends is when I can actually work on fixing things.
For device specific things just post the bugs / logs here. For CM specific bugs I would use JIRA and post a link to the bug here. (More helpful/useful to the CM team to make an actual JIRA bug report.)

3 WORDS: STABLE AS ****!
thanks for the rom, this will forsure be my daily driver. only little problem is the no service icon (xt1031) but data is working. soft reboot fixes it though!

Can anyone please comment on the speed of this ROM since it is Linaro based? The other 5.1 ROMs on my phone are pretty responsive, but if even more speed can be gained with our limited hardware, that will be great.

@CodyF86,
Having a problem with the download link. Rom starts downloading but does not download the whole 251mb. Only partial download. Tried about ten times but still same result. Tried with a different browser but same result.
Edit: Nevermind. Downloaded the rom from my phone and copied it from download folder on phone to internal storage.

Hello there @CodyF86 ! Thanks for you work! One little request. Do you think you will be able to add a mirror or upload your work to another claudbased storage? Like MEGA or Mediafire or AndroidFileHost or whichever you want. This one you are using is insanely unstable for me. It gets interrupted every 5 minutes. I'll be really glad if you could change it or add other(s).
Cheers.

I'll upload to Google drive starting tonight also. Driving home from work, will do another one.

CodyF86 said:
I'll upload to Google drive starting tonight also. Driving home from work, will do another one.
Click to expand...
Click to collapse
Thank you very much! And sorry for bothering you with this. I really want to test your ROM since al Linaro builds seem gone from this forum. Thanks again. Drive safe
Cheers.

New build posted. Main link is to Google drive now.
Some more ARM assembly fun if you look under the kernel source commits.
Will fix the signal indicator so you don't have to do a soft reboot for it to work this weekend. Need to go through the soak test build.prop and compare a few other things...just need time this weekend.

CodyF86 said:
New build posted. Main link is to Google drive now.
Some more ARM assembly fun if you look under the kernel source commits.
Will fix the signal indicator so you don't have to do a soft reboot for it to work this weekend. Need to go through the soak test build.prop and compare a few other things...just need time this weekend.
Click to expand...
Click to collapse
thanks for both: new link and new build Can I dirty flash it over the build before? Just installed the first release lol
Cheers.

I've been dirty flashing; should be good to go.

Update: yes, this ROM is very fast indeed! Thanks for sharing.

This ROM is very fast! Especially for a CM ROM (which in my experience have gotten horribly slow over the last few versions) I haven't experienced nearly as many redraws, stutters, freezes or any other general unpleasantness. Good job @CodyF86

starkly_raving said:
This ROM is very fast! Especially for a CM ROM (which in my experience have gotten horribly slow over the last few versions) I haven't experienced nearly as many redraws, stutters, freezes or any other general unpleasantness. Good job @CodyF86
Click to expand...
Click to collapse
Same here. great work! Not as many customizable like other 5.1 based out there, but is enough fast and stable. Thanks.

just wondering what recovery you are using and do partitions need changed from stock?

What models are supported?

@CodyF86
thanks for your work!
I've a strange bug on last cm...every time i reboot time and data change and the year switch to 2025. I've read its time_daemon related bug...can you control? I've this issue with last cm12 builds

Shawnsch said:
just wondering what recovery you are using and do partitions need changed from stock?
Click to expand...
Click to collapse
CWM 6.0.5.1 I think 6.0.4.7 is the last one posted on CMs website, I'll post the latest one in the OP tonight, but they're basically the same. Nothing needs to be changed from stock.
Orjakone said:
What models are supported?
Click to expand...
Click to collapse
Theoretically they all should work, but I need someone to the GSM version to try it out.
The_Poison said:
@CodyF86
thanks for your work!
I've a strange bug on last cm...every time i reboot time and data change and the year switch to 2025. I've read its time_daemon related bug...can you control? I've this issue with last cm12 builds
Click to expand...
Click to collapse
Weird, I haven't noticed that, but tbh I haven't actually payed attention to what year my phone shows / I don't even have it set up to show me I'll have to look and see if mine does it also.
Will do another one tonight / it's the weekend can play around with it get some things done now.

[KERNEL][SOON] HakyKernel 3.1.2

Will be updated soon
Issues:
Settings app: closed automatically when activate Bluetooth.
Kernel information: still appear on 3.0.101, i guess modules of MoshKernel should be updated too.
Android rebooting each 10/15 minutes.
Wifi: not working.
Code:
[*]22/04/2015:
-initial build.
-I will make zImage and use as prebuilt kernel in my roms after add arch-capri drivers.

haky 86 said:
After done some google search about to find similar devices to our phone and some guys on Whatsapp group give me some useful information about Samsung Galaxy S Duos 2 that device share same broadcom chipshet but the kernel is more updated (3.4.5), so I decide to port this version to our phone Samsung Galaxy S2.
I start some tests witnout arch-capri drivers in kernel/samsung/3.4/arch/arm just to see if Android boot or not, the result was really fantastic so from today we can port 3.4 kernel without any problems.
Issues:
Settings app: closed automatically when activate Bluetooth.
Kernel information: still appear on 3.0.101, i guess modules of MoshKernel should be updated too.
Android rebooting each 10/15 minutes.
Wifi: not working.
Code:
[*]22/04/2015:
-initial build.
-I will make zImage and use as prebuilt kernel in my roms after add arch-capri drivers.
Click to expand...
Click to collapse
Okey. Is this for stock or asop based roms?

rs tony said:
Okey. Is this for stock or asop based roms?
Click to expand...
Click to collapse
for both roms :good::good:

thanks @haky 86
I think in future u make this phone work so much better than iphone6
your one of the best developer for this phone

SmzAmir said:
thanks @haky 86
I think in future u make this phone work so much better than iphone6
your one of the best developer for this phone
Click to expand...
Click to collapse
Sure once finish 5.1.1 i can recall other devs to share experience and make 3.4 work perfect:thumbup::thumbup:
Sent from my GT-I9105P using XDA Free mobile app

haky 86 said:
for both roms :good::good:
Click to expand...
Click to collapse
amazing work :good: only a question, i am a newbie on android so what will be the difference betwen them?

cracker12 said:
amazing work :good: only a question, i am a newbie on android so what will be the difference betwen them?
Click to expand...
Click to collapse
the differences are:
-roms will be more stable.
-kernel new and updated instead of old stock and slow 3.0.101.
-antutu test result about 13000 points with some fixes may get better result.
-fast booting.
-this version could be useful for android 6 when will out.

haky 86 said:
the differences are:
-roms will be more stable.
-kernel new and updated instead of old stock and slow 3.0.101.
-antutu test result about 13000 points with some fixes may get better result.
-fast booting.
-this version could be useful for android 6 when will out.
Click to expand...
Click to collapse
Thanks... Keep up

[*]23/04/2015:
-drivers are imported without problem.
-now i'm fix compilation errors to see if will done or not.

Hey u make this
It awesome
---------- Post added at 03:40 AM ---------- Previous post was at 03:37 AM ----------
Hope you will fixed the issues in future
Do it have enhanced gpu

Man, you do a lot of great work.

thanks guys but may i wil discontinued this project since no devs are interested to port newer kernel like galaxy w where started from 2.6 and updated up to 3.4..

left it open haky..maybe they are busy for now..we need it bro

haky 86 said:
thanks guys but may i wil discontinued this project since no devs are interested to port newer kernel like galaxy w where started from 2.6 and updated up to 3.4..
Click to expand...
Click to collapse
sad news!
I was really looking forward if someone can port a new kernel, but as you said it's not an easy job and no devs are intrested

haky 86 said:
thanks guys but may i wil discontinued this project since no devs are interested to port newer kernel like galaxy w where started from 2.6 and updated up to 3.4..
Click to expand...
Click to collapse
So this one is really down? Hey, man, we need you, continue your work

why me? the best succeed I got is integrate part of capri's kernel archecture into 3.4 and entire code should be readpted to work on our phone. in case of even ported, I will not release the source coz I will not do the homeworks of others

3.1.2 Kernel
-update patch like 3.0.31 -> 3.0.32 is adapted as well.
-now im apply the patch to update the code see ya.

3.1.2 in progress
I have a question dear @CoolDevelopment I manage to update the kernel of this phone from 3.0.101 to 3.1.2 using the patch of kernel.org's website.
here my questions:
-if got failed patch, should skip them in case can't found it code?
-I saw there are a lot of detected commit that already patched, should be skipped too and apply only the new code?
-is enough just downloading 3.1.2.patch and use patch -p1 method or should download kernel source too.
https://www.kernel.org/pub/linux/kernel/v3.x/
now I'm compiling a zImage seems no errors for now, if boot I will continue the port :good:
thanks in advance

haky 86 said:
I have a question dear @CoolDevelopment I manage to update the kernel of this phone from 3.0.101 to 3.1.2 using the patch of kernel.org's website.
here my questions:
-if got failed patch, should skip them in case can't found it code?
-I saw there are a lot of detected commit that already patched, should be skipped too and apply only the new code?
-is enough just downloading 3.1.2.patch and use patch -p1 method or should download kernel source too.
https://www.kernel.org/pub/linux/kernel/v3.x/
now I'm compiling a zImage seems no errors for now, if boot I will continue the port :good:
thanks in advance
Click to expand...
Click to collapse
Upload your source man, else noone can help you
I hope you don't have just changed the version numbers...

no i didn't, here my new branch
https://github.com/hak86/android_kernel_samsung_galaxys2plus-common/tree/3.1.2-lp
Compilation is work fine, now i will try to compile with make -j4 bootimage to get the modules and use them on nebula's flashable.

[ROM] Dirty Unicorns v11.0 (Nougat) [unofficial] [no new builds ATM]

Disclaimer: Flash this ROM at your own risk. I am not responsible for what you do on your device.
I've paused this project, since the DU team has not published a official Nougat release (v11.0) yet.
Please be patient and wait for a release.
Thanks!​
Dirty Unicorns v11.0 (Nougat) (unofficial)
for Nexus 7 (2013)​
About Dirty Unicorns:
Dirty Unicorns is a project that started out with no name. It was a project that was first based off AOKP back in the early days of Jelly Bean. In the early days it was just a one man show on one device, the EVO 3D. Since then, many others have joined the project and it has grown exponentially.
We have seen a lot of talent contribute to this project of ours. Big or small, the focus was always on contributing to the community. That is ultimately why we do what we do. After Jelly Bean, we decided to move to a new base, OmniROM. While AOKP was fun, OmniROM proved to be even more exciting base because it challenged us to see what we could do with a project that had different goals in mind. We learned a lot and again, gain contributors. With Lollipop, we moved to an AOSP base with a lot of patches from CAF to make our older devices function as they should. We grew even more and learned a whole lot more.
It has been an awesome learning experience and is still not over! We are still learning every day and continue to move forward. Lastly, we DO NOT accept, nor ask, for donations. We don't believe in that. Everything that is necessary to keep this project going is out of our own pocket. Gerrit, Jenkins, Websites, Devices, etc. We will never ask for a dime. All we do ask, is that you have patience, search, read and try to enjoy the process with us!!​
Downloads:
No Downloads ATM since there is no official Nougat release by the DU team.
What works:
Audio
Brightness
GPU Acclereration
Bluetooth
Wifi
GPS
NFC
Location services
Camera and video recording
Video playback
MTP
Sensors
Bugs:
- very poor 1080p video recording quality
(- same ones as AOSP 7.0)
ROM Source - https://github.com/DirtyUnicorns
Device and Kernel Source - https://github.com/aosp-msm8960 (thanks )
XDA:DevDB Information
Dirty Unicorns, ROM for the Nexus 7 (2013)
Contributors
ans_ss, DevSwift1, zaclimon
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Beta
Created 2016-09-21
Last Updated 2016-09-30

Thanks, will give this a runout later (as soon as I can get it...afh is playing up a bit ATM)...
Cheers.

Been running these builds since they first appeared on AFH. Running the 9/19 build and I must say they are the smoothest nougat builds thus far. Awesome work! Thanks.

Afh is under maintenance for a while . Gonna try again later, can't wait to try it out. Thank you for sharing this ROM with us !
Edit: I can't see any files on afh . has it been removed?

Seems to be so. I am going to re upload the file when i am at home.
Edit: The ROM is now available for download. Happy flashing

Flashed this , seems to be working really well. Titanium works fine, got all my apps moved over, etc. It's super speedy especially once the thing settles down, battery life, I'm not sure about yet, but so far, so good!
*Updated*
Can't seem to get Landscape to work, it's set to auto, the only options are auto/portrait, landscape isn't even an option at this point in the settings... hmmm

Just finished flashing. Works great but the sensors do not work , please fix them. And it's the first 7.0 ROM that has inbuilt advanced reboot options ! All it needs is the circle battery icon, bit that will come with time Thank you once again !
Edit: I've attached a screenshot from a Sensor App.

do you know if this will work on Deb (with no mobile data)
and what GApps are folks using? Open Mini?

Micro gapps flashed fine.
Auto rotate and brightness slider are busted here too.
Brightness slider works if you disable adaptive brightness.

Does it work also with the LTE version ?

Gozor421 said:
Does it work also with the LTE version ?
Click to expand...
Click to collapse
Only for the wifi-only version for now

Gozor421 said:
Does it work also with the LTE version ?
Click to expand...
Click to collapse
No, however you can try the one on afh for deb. That works well too until op decides to make one for Deb too.

New build is up!
The sensors should now work.

ans_ss said:
New build is up!
The sensors should now work.
Click to expand...
Click to collapse
Thanks mate...?

ans_ss said:
New build is up!
The sensors should now work.
Click to expand...
Click to collapse
Hi ! Would you consider a deb build too?

Short summary until now:
Works great, but the following flaws are still unfixed (and yes, I know that it is still in beta):
-> Alarm clock can only be set to ring tones
-> Tweaks nearly completely empty
-> Battery Icon can not be exchanged
Else great work!

I've also uploaded a build for deb now. Happy flashing!
rofl022 said:
Short summary until now:
Works great, but the following flaws are still unfixed (and yes, I know that it is still in beta):
-> Alarm clock can only be set to ring tones
-> Tweaks nearly completely empty
-> Battery Icon can not be exchanged
Else great work!
Click to expand...
Click to collapse
That's because not all features got ported from Marshmallow to Nougat yet. The DU Developers just need some time.

@Mazda did you approve this release? Beacause du nougat isn't released yet. @reyscott Can you close this thread as this release has no permission.

simplyme2908 said:
@Mazda did you approve this release? Beacause du nougat isn't released yet. @reyscott Can you close this thread as this release has no permission.
Click to expand...
Click to collapse
This is unofficial build... it shouldn't be problem I think as long as users do not report bugs to DU team
Nitin

nitin.chobhe said:
This is unofficial build... it shouldn't be problem I think as long as users do not report bugs to DU team
Nitin
Click to expand...
Click to collapse
Doesn't work that way, Alex has stated that he wants no one to build publicly yet multiple times on his g+ account.
No idea why people can't wait for officials, then unofficals are no problem.

Lineage OS with SultanXDA tweaks and OMS

Hi World,
I've been building a ROM nightly, pulling from LineageOS, LineageOMS, and SultanXDA.
It's been fine for me, so I thought I'd share it for others to use too.
This is my first go at posting this kind of thing, so please go easy on me.
Sources:
https://github.com/LineageOS
https://github.com/LineageOMS
https://github.com/sultanxda
Credits
LineageOS team
Substratum team
@Sultanxda
Before Flashing...
You MUST be on the correct Firmware for this image to flash. Download them here:
OnePlus 3T
OnePlus 3
Downloads:
XDA
Android File Host
Flash the firmware image in TWRP. From there in, it's the usual instructions. Flash in TWRP, optionally use GAPPS and Magisk/SuperSU/Lineage-Addon.
Usual risks apply.
If there is any other information I should be including here, please let me know.
XDA:DevDB Information
Lineage OS with SultanXDA tweaks and OMS, ROM for the OnePlus 3
Contributors
prmcmanus
ROM OS Version: 7.x Nougat
ROM Firmware Required: OB8
Based On: LineageOS
Version Information
Status: Nightly
Created 2017-06-18
Last Updated 2017-06-18

Changelog
In the attachments.
This is the how I'm capturing Change Logs until I set up my own repo. Advice is welcomed if there are better methods.
Code:
repo forall -pc ' git log --since=$(cat /home/mcmanus/android/changelog/lastbuild_OP3.txt) --date-order ' > /home/mcmanus/android/changelog/OP3-changelog-$(date +%Y-%m-%d).txt
date +%d.%m.%Y > /home/mcmanus/android/changelog/lastbuild_OP3.txt

Reserved

Good start bro!! ?

@prmcmanus
Welcome brother..[emoji120]
There is already a sultanxda based + oms supported build, so please will you tell us about changlog...
Anyway We appreciate your work and contribution for 3(T)...[emoji4]

mukesh22584 said:
@prmcmanus
Welcome brother..[emoji120]
There is already a sultanxda based + oms supported build, so please will you tell us about changlog...
Anyway We appreciate your work and contribution for 3(T)...[emoji4]
Click to expand...
Click to collapse
Thanks I didn't realise there was already a similar ROM, which is why I built this one.
It looks like the other is adding other features, whereas I'm sticking to the sources for now, so that's be the difference between the two.
I'll get the change log in the reserved post

Hi! Thank you for your work!
Please consider taking features from this unofficial Sultan's build by @matssa as, according to him, he will stop building for OP3 as OP5 comes out.
Would be awesome if your rom kinda 'inherited' his work into the future

Nezorflame said:
Hi! Thank you for your work!
Please consider taking features from this unofficial Sultan's build by @matssa as, according to him, he will stop building for OP3 as OP5 comes out.
Would be awesome if your rom kinda 'inherited' his work into the future
Click to expand...
Click to collapse
Hi @Nezorflame, I didn't realise this ROM existed until yesterday! Looks interesting, and definitely more involved than what I'm currently doing. I won't be implementing anything from that ROM until development ceases on it. If/when that happens, I'll definitely look into it

prmcmanus said:
Hi @Nezorflame, I didn't realise this ROM existed until yesterday! Looks interesting, and definitely more involved than what I'm currently doing. I won't be implementing anything from that ROM until development ceases on it. If/when that happens, I'll definitely look into it
Click to expand...
Click to collapse
He did mention that he is gonna keep his repos up for anybody who wants to continue updating and building his version.
Sent from my ONEPLUS A3000 using Tapatalk

prmcmanus said:
Hi @Nezorflame, I didn't realise this ROM existed until yesterday! Looks interesting, and definitely more involved than what I'm currently doing. I won't be implementing anything from that ROM until development ceases on it. If/when that happens, I'll definitely look into it
Click to expand...
Click to collapse
Looking forward to it! One thing would be nice though, even if we forget about the features - OTA update

Started using your builds as Matssa is about stop supporting his builds. Got no issues, runs stable and smooth. Looking forward to future updates. Update notes would definitely help this rom grow, ota as well

Switching to this ROM as well as matssa will do only one, final build. @prmcmanus please consider my previous request

Would be really cool if this Dev picks up right where Matsaa leaves off.

Nezorflame said:
Hi! Thank you for your work!
Please consider taking features from this unofficial Sultan's build by @matssa as, according to him, he will stop building for OP3 as OP5 comes out.
Would be awesome if your rom kinda 'inherited' his work into the future
Click to expand...
Click to collapse
Stupifier said:
Would be really cool if this Dev picks up right where Matsaa leaves off.
Click to expand...
Click to collapse
I think calling me a Dev might be overly-generous at this point, but I'll learn as I go and do what I can.
I work a 4-on 4-off shift pattern, so I'll look into Matssa's ROM more in a couple of days, and I aim to pick it up.

prmcmanus said:
I think calling me a Dev might be overly-generous at this point, but I'll learn as I go and do what I can.
I work a 4-on 4-off shift pattern, so I'll look into Matssa's ROM more in a couple of days, and I aim to pick it up.
Click to expand...
Click to collapse
That's good news! Matssa managed to get lock screen blur working like on official Lineage. Sultan's builds and your current builds don't have this feature so I'm looking forward to see you pick his ROM up.
Sent from my ONEPLUS A3000 using Tapatalk

Yes! Finally just a LineageOS ROM with sultan kernel and OMS without all the extra stuff
THANK YOU!
OTA updates would be one nice thing to add... For the rest it's perfect as is

@prmcmanus
I've just downloaded your build to flash..
Why are you not updating your thread, I've seen you're making build daily ( may be nightly)...[emoji106]

mukesh22584 said:
@prmcmanus
I've just downloaded your build to flash..
Why are you not updating your thread, I've seen you're making build daily ( may be nightly)...[emoji106]
Click to expand...
Click to collapse
'Cos it's the first ROM I've shared and I don't know what everyone wants to know
I've been a bit suspicious of the fact all the builds are coming out at a very similar size, so I've started from a clean slate on the last two builds and they still turn out similar.
Not had a chance to look at Matssa's build properly yet.
OTA will be the first thing I implement, given that it's what is being requested

prmcmanus said:
'Cos it's the first ROM I've shared and I don't know what everyone wants to know
I've been a bit suspicious of the fact all the builds are coming out at a very similar size, so I've started from a clean slate on the last two builds and they still turn out similar.
Not had a chance to look at Matssa's build properly yet.
OTA will be the first thing I implement, given that it's what is being requested
Click to expand...
Click to collapse
I've flashed your latest build and everything seems fine... Just unable to install V4A...
Will report you after a battery cycle....

@prmcmanus idle drain is so solid let's check active drain..and also installed V4A after many attempt...
Thanks for build...