Hi i have got HTC diamond and i must've sat on it or something, but i have a few large cracks on the internal screen. Touch works fine i mean, everything is in working order, its jsut i have a massive cracks from one side to the other. I'm having trouble finding the right screen because there is the lcd panel with the htc logo and then theres another with just the screen. I want to replace it myself because can't be bothered going through the whole sending the phone off phase. If someone can redirect me to a plae i could get a screen for a reasonable price, that would be great.
Let it go... I'm actually having the same problem and there is one thing you need to know : you need to sold a connector from the LCD screen to the Touchscreen, it's not a connector that you can plug easily.. (((
I just bought a LCD screen and a touchscreen on eBay, but without this sold, it won't work as I would..
I have solder and the kit and if i can find a tutorial somehwere i'm sure it can't be that hard. You said you found it on ebay, do you have a name or maybe a link? how much did you pay? =-s
Hey, I have a 4 tablets with same problem, all with cracked touchscreen.
I bought 5 new touchscreen, which marked 69.10I21.G01, but all of them refused to work, but perfectly working with other TF300, which have native 69.10I21.G01 touch.
After great research I found that my four tablets have "Touch Panel Version" 3011-4822 and 3011-4817 - on a tablet which work with new touchscreens.
Anybody know how to change firmware of touch screen panel (PCB) ?
AxeL-V said:
Hey, I have a 4 tablets with same problem, all with cracked touchscreen.
I bought 5 new touchscreen, which marked 69.10I21.G01, but all of them refused to work, but perfectly working with other TF300, which have native 69.10I21.G01 touch.
After great research I found that my four tablets have "Touch Panel Version" 3011-4822 and 3011-4817 - on a tablet which work with new touchscreens.
Anybody know how to change firmware of touch screen panel (PCB) ?
Click to expand...
Click to collapse
Bump. Did you ever get it to work? I now am facing the exact same problem as you...
I have no idea if this will help, but if you go to settings - about tablet - and repeatedly tap the touch firmware line rapidly you get a firmware load screen for pad, dock, and camera. Now if touch is broken perhaps you can emulate with a mouse pointer click if you have one available. I've never used this update tool. I just know it exists.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
I have no idea if this will help, but if you go to settings - about tablet - and repeatedly tap the touch firmware line rapidly you get a firmware load screen for pad, dock, and camera. Now if touch is broken perhaps you can emulate with a mouse pointer click if you have one available. I've never used this update tool. I just know it exists.<br />
<br />
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
I know this menu but as you I can't find a way to use this. I do have a mouse.
OK, so as of this post, I was able to use a bluetooth keyboard with a mouse stick in the middle and access this area with the procedure I mentioned. Now I guess it would just be a matter of getting ahold of the firmware in zip form, putting it on your internal storage, and using this tool? Again, I've never done it, making guesses here.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
funnel71 said:
OK, so as of this post, I was able to use a bluetooth keyboard with a mouse stick in the middle and access this area with the procedure I mentioned. Now I guess it would just be a matter of getting ahold of the firmware in zip form, putting it on your internal storage, and using this tool? Again, I've never done it, making guesses here.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Yes. I also do not know what package to use.
AxeL-V said:
Hey, I have a 4 tablets with same problem, all with cracked touchscreen.
I bought 5 new touchscreen, which marked 69.10I21.G01, but all of them refused to work, but perfectly working with other TF300, which have native 69.10I21.G01 touch.
After great research I found that my four tablets have "Touch Panel Version" 3011-4822 and 3011-4817 - on a tablet which work with new touchscreens.
Anybody know how to change firmware of touch screen panel (PCB) ?
Click to expand...
Click to collapse
Are you sure your pad's touchscreen type is G01? NOT G03? Because there is another type is G03,and they're not same.
xushibo820213 said:
Are you sure your pad's touchscreen type is G01? NOT G03? Because there is another type is G03,and they're not same.
Click to expand...
Click to collapse
How do they differ from eachother?
I had a nonbranded one as my orig but now bought a go1 which does not work. I bet it is the ts board.
Stempanssi said:
How do they differ from eachother?
I had a nonbranded one as my orig but now bought a go1 which does not work. I bet it is the ts board.
Click to expand...
Click to collapse
Yes, I have defined this.
G01 work with "Touch Panel Version" 3011-4822
G03 work with "Touch Panel Version"3011-4817 and also named "5158N FPC"
And I never see tablets which have touch marked G03, only 5158N FPC-1
or G01
Tried both digitizers G01 and G03
Hello,
I'v tried both G01 and G03 version on tablet (with the flex number 5158N FPC-1), but they didn't worked.
The touch panel version is 3011-4822.
Anyone a solution? Or do i need the exact same digitizer number?
Thanks
Best regards,
Albert
Just kind of curious here as I did have some serious brush with the same issue elsewhere.
AxeL-V said:
After great research I found that my four tablets have "Touch Panel Version" 3011-4822 and 3011-4817 - on a tablet which work with new touchscreens
Click to expand...
Click to collapse
This sounds confusing to me. At any rate, I'm just relating what happened in my case. Touchscreen smashed. Swapped it with new one. Dud. Got the Touchscreen PCB replaced. Upon booting, the first thing the device did after the splash screen was update the touchscreen firmware. And I was not even on stock ROM. Works fine thereafter. The custom rom then installed did not have the firmware update function, and I couldn't find a way to extract just the stock touchscreen firmware for comparison purposes.
So just to find out, I flashed the latest stock rom (extracted blob) from Asus site (10.4.2.20) through ADB . Went to Settings/About Tablet, ticked on Firmware Update. Returned with "all firmware up to date." What it tells me is that the newest stock rom contains all up-to-date firmwares, and if it doesn't, it would hunt for current ones via Firmware Update function. Seems both stock rom and the update function would collect hardware info and proceed to install the correct firmware version automatically.
So far as I know, the reported PCBs are all of the same hardware version (v1.3). If the PCB is working, firmware would be updated on its own. Don't need to do nothing. If it doesn't, then you'd have to look at the PCB itself. If you have a working PCB, you might want to put it on a tablet on which the new Touchscreen is NOT working. Just be extra careful in doing this as you might bust it in the process (see this Heading in General Section). Please report any progress if you could.
The right version?
Postman976 said:
I'v tried both G01 and G03 version on tablet (with the flex number 5158N FPC-1), but they didn't worked.
The touch panel version is 3011-4822.
Anyone a solution? Or do i need the exact same digitizer number?
Click to expand...
Click to collapse
Yes, you need to use the exact replacement for the one in your transformer!
I have found there are 4 distinctly different digitizer versions available:
1) No markings on the ribbon, with a white barcode
2) 69.10I21.G01 markings on the ribbon, with a white barcode
3) 69.10I21.G03 markings on the ribbon, with a white barcode
4) 5158N FPC-1 markings on the ribbon, with a blue barcode
I have been incorrectly sent the .G01 version twice now when the seller was actually showing pictures the 5158N FPC-1 version I need.
If anyone has a source for the 5158N FPC-1 version, I would appreciate you posting it
Etrade Supply very clearly shows the one I need on their site... but sent the G01 version. Now I am working on getting this back to China.... what a mess!
Before ordering, I would STONGLY suggest you check if they really are selling the digitizer shown. There is a lot of "bait and switch" going on.
Steven--
sak10x said:
Yes, you need to use the exact replacement for the one in your transformer!
I have found there are 4 distinctly different digitizer versions available:--
Click to expand...
Click to collapse
How did you find out there are 4 different versions and why are they not compatible with any given tab? Did you do the tests yourself? How do you come to the conclusion that one needs the exact replacement? My original touchscreen had no printing. I replaced it with a GO1 and it worked fine. I'm not questioning your integrity, but in order to help others, you need to chronologically document your findings so it would make sense instead of just winging it as if it's a revelation from above.
sak10x said:
Yes, you need to use the exact replacement for the one in your transformer!
I have found there are 4 distinctly different digitizer versions available:
1) No markings on the ribbon, with a white barcode
2) 69.10I21.G01 markings on the ribbon, with a white barcode
3) 69.10I21.G03 markings on the ribbon, with a white barcode
4) 5158N FPC-1 markings on the ribbon, with a blue barcode
I have been incorrectly sent the .G01 version twice now when the seller was actually showing pictures the 5158N FPC-1 version I need.
If anyone has a source for the 5158N FPC-1 version, I would appreciate you posting it
Etrade Supply very clearly shows the one I need on their site... but sent the G01 version. Now I am working on getting this back to China.... what a mess!
Before ordering, I would STONGLY suggest you check if they really are selling the digitizer shown. There is a lot of "bait and switch" going on.
Steven--
Click to expand...
Click to collapse
Try at this site ,
http://www.etradesupply.com/oem-asus-transformer-pad-tf300t-digitizer-touch-screen.html ,
on picture it's the 5158N FPC-1 .
Hi,
Just wondering if anyone has found a source for the "5158n fpc-1" version? Has anyone tried from the shop linked in the above post?
Or got a confirmation from them that it is "5158n fpc-1"
I got one off ebay that didnt work with my tablet. Not sure what version that was because I didnt know there were different versions at the time, I have sent it back to them.
Thanks
Reido
Postman976 said:
Hello,
I'v tried both G01 and G03 version on tablet (with the flex number 5158N FPC-1), but they didn't worked.
The touch panel version is 3011-4822.
Anyone a solution? Or do i need the exact same digitizer number?
Thanks
Best regards,
Albert
Click to expand...
Click to collapse
I have had this exact same experience.. Tried G01 and G03 and no go. Original digi is long gone, but purchased last May.
What I don't follow is why the "earlier" model digitizers ,5158N FPC-1, would require the "later" version firmware, 3011-4822 vs. 17.. That just doesn't make sense..
The only 5158n fpc-1 ones I can find are $280 USD
ReidoII said:
The only 5158n fpc-1 ones I can find are $280 USD
Click to expand...
Click to collapse
Yea, saw that seller on ebay.. g01, g03, white label all 70.00, but 5158n almost $300.00.. Pretty f'd up.. Guessing they're out of production.
Sent an email to the seller that provided my g01 and g03 digitizers about the apparent debacle - they say they don't have a 5158n and neither does anyone else. But they will give me a refund.
I also sent a message to the sales dept of the seller at the link provided by esgts to see if the digi in the photo is the actual digi that gets shipped. Will post what I find out..
mabretske said:
Yea, saw that seller on ebay.. g01, g03, white label all 70.00, but 5158n almost $300.00.. Pretty f'd up.. Guessing they're out of production.
Sent an email to the seller that provided my g01 and g03 digitizers about the apparent debacle - they say they don't have a 5158n and neither does anyone else. But they will give me a refund.
I also sent a message to the sales dept of the seller at the link provided by esgts to see if the digi in the photo is the actual digi that gets shipped. Will post what I find out..
Click to expand...
Click to collapse
Mine was bought in April '12. It would be safe to assume yours and mine belonged to the same production batch. If its firmware got updated, what prevented yours from doing the same? Did you try to flash it with the latest stock ROM (US 10_4_2_20)? (see my question in the "Back Removed" thread).
graphdarnell said:
Mine was bought in April '12. It would be safe to assume yours and mine belonged to the same production batch. If its firmware got updated, what prevented yours from doing the same? Did you try to flash it with the latest stock ROM (US 10_4_2_20)? (see my question in the "Back Removed" thread).
Click to expand...
Click to collapse
Did you replace your broken one with a G01 or a G03 version?
Running the standard android?
so about a week ago I purchased a tab 2 from a "friend". he said it had a cracked screen and he just replaced the digitizer. and it looked good and everything. so I paid him, then got home and noticed there are 2 zones on my screen that are completely unresponsive. he also replaced the back case of it, and its the wrong one. so I told him about the screen and he just said sorry, guess I didn't use it enough before I sold it to notice it...so I cant get my money back or anything, so im taking it upon myself to fix this.
I know the digitizers have different rev's. right now it has a rev 3 digitizer. my "friend" also threw away the original digitizer so I have no clue which one I need.
my questions is, is there any way to figure out which exact digitizer I need??? or is it possible that the rev 3 is the right one and this one is just gone bad/cheap?
I need help ASAP! I want this fixed and sold and off my hands. I also already searched around for a solution but found nothing....
thanks to anyone that can help!
killjoy1179 said:
so about a week ago I purchased a tab 2 from a "friend". he said it had a cracked screen and he just replaced the digitizer. and it looked good and everything. so I paid him, then got home and noticed there are 2 zones on my screen that are completely unresponsive. he also replaced the back case of it, and its the wrong one. so I told him about the screen and he just said sorry, guess I didn't use it enough before I sold it to notice it...so I cant get my money back or anything, so im taking it upon myself to fix this.
I know the digitizers have different rev's. right now it has a rev 3 digitizer. my "friend" also threw away the original digitizer so I have no clue which one I need.
my questions is, is there any way to figure out which exact digitizer I need??? or is it possible that the rev 3 is the right one and this one is just gone bad/cheap?
I need help ASAP! I want this fixed and sold and off my hands. I also already searched around for a solution but found nothing....
thanks to anyone that can help!
Click to expand...
Click to collapse
I know this is late but if it's a REV.03 you should get another REV.03. As long as it works it's the right version. Your screen is either defective, has dirty contacts (use eraser to clean), or inserted crooked.
Mine on the other hand has no REV# printed on the digitizer cable and I can't figure out which one works with it. I have a REV.01 and REV.03 right now and neither of them work. Only the mysterious original screen with a crack will work.
Different revisions on digitizers
I noticed there are several revisions on digitizers. Mine apparently is a REV 0.0 since there are no markings. I asked a supplier and they told me what revision I have. They also said they did not stock REV 0.0. My question is does anyone know a good supplier that carries all revisions of digitizers? Any help would be greatly appreciated.
This is for a GT-5113TS
I"m in the same boat!
Hi, I have exactly the same issue, I've tried a rev 3 and it doesn't work at all. My original works fine but is shattered and there are no markings at all on the flex cable. I was also told that mine is a rev 0.0 but can't find one anywhere. I noticed that if you look closely at the connectors on the flex cables the original has all of the contacts and the rev 0.3 is missing the #2 contact. Let me know if you find one that will work.
I just swapped out a broken digitizer with a REV02 and it doesn't work, on the broke one it doesn't say REV but it has MCF-101-0403-V3 ISU 1238. Does that mean its REV03?
same problem
I broke my tab screen a while back and have so far been sent two note screens' and 4 screens of what i imagine are either wrong version or defective. Dod you ever solve your problem