Hello Friends,
With MaZel using much of the services from Aroma Installer, here you go with one more great work from the developer of Aroma - amarullz.
I have provided the link for Aroma File Manager developed by amarullz. This is a file manager that can be used in recovery boot menu. While being in recovery if you want to modify some files, or move some files, no need to boot the phone again. You can do all the operations with the help of Aroma File manager while being in the recovery menu itself.
Along with the file manager, i have attached a configuration file which has the touch calibration done for our device. So you can directly start using it insead of calibrating it again.
How to Use :
Download the attached Aroma File manager and Configuration file to your sdcard.
Put the both the files in the same folder.
Reboot to CWM
Select the Aroma file manager zip via "Install zip from sdcard"
Bingo....You got your file manager opened. You can change the themes and fonts in settings.
Currently the configuration file has calibration done for SGR and themes set to ICS with Roboto font.
Download link for Aroma File manager - Link
Original Source - Aroma File Manager
P.S : I have zipped the config file and uploaded it as .cfg extension is not a valid one for uploading. So please unzip the config file and put it in the same folder where you copy the Aroma File manager zip file.
Great effort and tool buddy...
the day is not far when selva would be called as a RECOGNIZED CONTRIBUTOR
yup buddy. I agree with you. Now we have list of buddies like MJ, ADAM & SELVA..these three are RC & RD as well..
thanks buddy
Hi friends...here is XLOUD+SRS+DOLBY+BEATS+ CLEAR AUDIO+ +CRISPY BASS sound enhancement in a single rom!!! :fingers-crossedcopyrights to:rwoksome and viper)
You will get awsome audio experiance!
NOTE:
1) This mod is for android ICS(4.0.X) and JB(4.1.X)!
2) This mod is for non-xperia devices! This mod is not for devices which comes with inbuilt beats,xloud and etc.,
3) I WILL NOT RESPONSIBLE FOR ANY KIND OF BRICK,DAMAGE! DO IT ON YOUR OWN RISK.....!
4) Please, remove/uninstall/delete library files of your any custom audio mod otherwise there is chances of getting bootloop!
5) BEFORE DOING ANYTHING YOU MUST HAVE A BACKUP OF YOUR SYSTEM!
6) This mode is not similar to acid or any other audio mods!
Q. WII THIS WORK WITH DSP MANAGER?
Ans. Yes, this will work with dsp manager but you will not needed dsp beacuse viper will provide you full control!!
Q. WILL THIS WORK WITH MY ******** ROM?
Ans. Yes, this works with all roms! if you still got any problem PM me!!!
Requirement:
1) Rooted device!
2)CWM
3)Root explorer!!
Procedure:
1) Download the RWOKSOME ENGINE 2 from here-
http://www.mediafire.com/?4bo9aovh99727yo
2) Flash this zip through CWM.
3) Now download VIPER from here,
link:http://www.mediafire.com/?pkbdfsii7ikn26l
4) Extract the correct folder according to your Android version. (Android 4.X)
5)Copy all the files inside that folder to your SD Card.
6) Use any Explorer with root access,copy libv4a_xhifi_ics.so(4.X is ics) to /system/lib/soundfx/ ,set permission to rw-r-r.
7)Go to /system/etc/ ,rename extension of audio_effects.conf(For Rom makers,delete this file,no need rename), example rename to .conf.bak.
Then copy the audio_effects.conf from your sdcard to here(/system/etc/),set permission to rw-r-r.
8) Go to /system/vendor/etc (if exists), rename extension of audio_effects.conf(For Rom makers,delete this file,no need rename), example rename to .conf.bak.
Then copy the audio_effects.conf from your sdcard to here(/system/vendor/etc/),set permission to rw-r-r.
9) Now install ViPER4Android_XHiFi.apk
10) Reboot! Enable viper.apk and set your own parameter! Enjoy!!!!!
>>>>>>>>>>> UPDATE<<<<<<<<<<<<<<
*Update for Xperia and all devices*
(All Copyrights to official viper4android team)......!!!!
Installation:
1. Download, extract and copy ViPER4Android_FX/XHiFi.apk to your device.
Download FX: http://www.mediafire.com/download/cz6l67mk81zsyq4
Download XHIFI: http://www.mediafire.com/download/x7as12gmsk70spo
2. Install the apk as USER app or SYSTEM app is up to you. (v2.3.1.0 onwards)
3. Run FX/XHiFi app from app drawer, allow root access if asked.
4. When driver installation prompted, choose Yes.
5. V4A auto detects your CPU and show available driver modes below : No modes: For processors with or without VFP . Battery Saving: Available for all processors with NEON. High Quality Mode: Available for processors with NEON. Super Audio Quality: Available for processors with NEON.
6. Choose your desired selection.
7. After installation done, Reboot device. 8. Done..!! Enjoy....!!!!
Uninstallation:
1. Open up V4A FX (and xhifi), go to menu and choose “Uninstall driver”.
2. After that, uninstall V4A FX (and xhifi) app itself.
3. Reboot. Done.
>>>>>> DONT FORGET TO HIT THE THANKS BUTTON, IT IS FREE OF COST
REDSTRIKER said:
Hi friends...here is XLOUD+SRS+DOLBY+BEATS+ CLEAR AUDIO+ +CRISPY BASS sound enhancement in a single rom!!! :fingers-crossedcopyrights to:rwoksome and viper)
You will get awsome audio experiance!
NOTE:
1) This mod is for android ICS(4.0.X) and JB(4.1.X)!
2) This mod is for non-xperia devices! This mod is not for devices which comes with inbuilt beats,xloud and etc.,
3) I WILL NOT RESPONSIBLE FOR ANY KIND OF BRICK,DAMAGE! DO IT ON YOUR OWN RISK.....!
4) Please, remove/uninstall/delete library files of your any custom audio mod otherwise there is chances of getting bootloop!
5) BEFORE DOING ANYTHING YOU MUST HAVE A BACKUP OF YOUR SYSTEM!
6) This mode is not similar to acid or any other audio mods!
Q. WII THIS WORK WITH DSP MANAGER?
Ans. Yes, this will work with dsp manager but you will not needed dsp beacuse viper will provide you full control!!
Q. WILL THIS WORK WITH MY ******** ROM?
Ans. Yes, this works with all roms! if you still got any problem PM me!!!
Requirement:
1) Rooted device!
2)CWM
3)Root explorer!!
Procedure:
1) Download the RWOKSOME ENGINE 2 from here-
http://www.mediafire.com/?4bo9aovh99727yo
2) Flash this zip through CWM.
3) Now download VIPER from here,
link:http://www.mediafire.com/?pkbdfsii7ikn26l
4) Extract the correct folder according to your Android version. (Android 4.X)
5)Copy all the files inside that folder to your SD Card.
6) Use any Explorer with root access,copy libv4a_xhifi_ics.so(4.X is ics) to /system/lib/soundfx/ ,set permission to rw-r-r.
7)Go to /system/etc/ ,rename extension of audio_effects.conf(For Rom makers,delete this file,no need rename), example rename to .conf.bak.
Then copy the audio_effects.conf from your sdcard to here(/system/etc/),set permission to rw-r-r.
8) Go to /system/vendor/etc (if exists), rename extension of audio_effects.conf(For Rom makers,delete this file,no need rename), example rename to .conf.bak.
Then copy the audio_effects.conf from your sdcard to here(/system/vendor/etc/),set permission to rw-r-r.
9) Now install ViPER4Android_XHiFi.apk
10) Reboot! Enable viper.apk and set your own parameter! Enjoy!!!!!
>>>>>> DONT FORGET TO HIT THE THANKS BUTTON, IT IS FREE OF COST <<<<<<
Click to expand...
Click to collapse
Xperia? :'(
ahmad990 said:
Xperia? :'(
Click to expand...
Click to collapse
Hi...! Thread updated for Xperia devices....!!! Enjoy....!!!
Only for S IV Active stock rom odex / deodex.
EQ system fully control the sound system (music , video , internet , bluetooth..) .
For CWM
Installation:
1) Download the DSPManager_for_I9295 S IV Active.zip
2) Put the zip file on your SDcard
3) Reboot in Recovery mod
4) Select flash zip files
5) Select the zip files
6) Reboot
Remove:
1) Download the Remove_DSPManager_for_I9295 S IV Active.zip
2) Put the zip file on your SDcard
3) Reboot in Recovery mod
4) Select flash zip files
5) Select the zip files
6) Reboot
(Archive remove DSPManager with all its tails)
For users of Power Aimp:
To Power Aimp worked with DSPManager to go in the player :
Preferences / Sound / Advanced Settings / Disable direct control volume.
well done:good:
screens
works great Thanks! :good:
For stock rom odex / deodex.
EQ system fully control the sound system (music , video , internet , bluetooth..).
Backup before installing.
Installation:
1) Download the DSP+Beats_for_UMI_X2.zip
2) Put the zip file on your SDcard
3) Reboot in Recovery mod
4) Select flash zip files
5) Select the zip files
6) Reboot
P.S.
For users of PowerAMP :
To PowerAMP worked with DSPManager to go in the player :
Preferences / Sound / Advanced Settings / Disable direct control volume.
We are going to use 'Dirac' sound module extracted from OPPO smartphones by ARISE team to increase sound of any device.
We will install Dirac using 'ARISE sound system zip'
REQUIREMENTS-
*ROOT ACCESS
*Custom Recovery (TWRP RECOMMENDED)
INSTRUCTIONS-
1. Download ARISE SOUND SYSTEM ZIP and arise_customize.prop from links given below.
2. Now move "arise_customize.prop" to your internal storage.
* - optional steps - If you just want "loud sound", skip these
*If you want additional sound mods like viper4android Dolby etc, you need to open "arise_customize.prop" and write true in front of whatever MOD you want.
*I advice "mediatek" users "not to use ice mods" as it sometimes stops other modules like Viper4android and Dolby
3. Now boot your device into recovery mode (TWRP RECOMMENDED)
You don't need to wipe "anything"
Just "dirty flash" it
4. Flash the ARISE Zip
If you want to uninstall any module just scroll down and set "uninstall_module" value to "true" and flash the zip again
DOWNLOADS-
ARISE ZIP
arise_customize.prop
VIDEO TUTORIAL-
https://www.youtube.com/watch?v=iTwXjXXv6vA&t=51s