Hi friends...here is XLOUD+SRS+DOLBY+BEATS+ CLEAR AUDIO+ +CRISPY BASS sound enhancement in a single rom!!! :fingers-crossedcopyrights to:rwoksome and viper)
You will get awsome audio experiance!
NOTE:
1) This mod is for android ICS(4.0.X) and JB(4.1.X)!
2) This mod is for non-xperia devices! This mod is not for devices which comes with inbuilt beats,xloud and etc.,
3) I WILL NOT RESPONSIBLE FOR ANY KIND OF BRICK,DAMAGE! DO IT ON YOUR OWN RISK.....!
4) Please, remove/uninstall/delete library files of your any custom audio mod otherwise there is chances of getting bootloop!
5) BEFORE DOING ANYTHING YOU MUST HAVE A BACKUP OF YOUR SYSTEM!
6) This mode is not similar to acid or any other audio mods!
Q. WII THIS WORK WITH DSP MANAGER?
Ans. Yes, this will work with dsp manager but you will not needed dsp beacuse viper will provide you full control!!
Q. WILL THIS WORK WITH MY ******** ROM?
Ans. Yes, this works with all roms! if you still got any problem PM me!!!
Requirement:
1) Rooted device!
2)CWM
3)Root explorer!!
Procedure:
1) Download the RWOKSOME ENGINE 2 from here-
http://www.mediafire.com/?4bo9aovh99727yo
2) Flash this zip through CWM.
3) Now download VIPER from here,
link:http://www.mediafire.com/?pkbdfsii7ikn26l
4) Extract the correct folder according to your Android version. (Android 4.X)
5)Copy all the files inside that folder to your SD Card.
6) Use any Explorer with root access,copy libv4a_xhifi_ics.so(4.X is ics) to /system/lib/soundfx/ ,set permission to rw-r-r.
7)Go to /system/etc/ ,rename extension of audio_effects.conf(For Rom makers,delete this file,no need rename), example rename to .conf.bak.
Then copy the audio_effects.conf from your sdcard to here(/system/etc/),set permission to rw-r-r.
8) Go to /system/vendor/etc (if exists), rename extension of audio_effects.conf(For Rom makers,delete this file,no need rename), example rename to .conf.bak.
Then copy the audio_effects.conf from your sdcard to here(/system/vendor/etc/),set permission to rw-r-r.
9) Now install ViPER4Android_XHiFi.apk
10) Reboot! Enable viper.apk and set your own parameter! Enjoy!!!!!
>>>>>>>>>>> UPDATE<<<<<<<<<<<<<<
*Update for Xperia and all devices*
(All Copyrights to official viper4android team)......!!!!
Installation:
1. Download, extract and copy ViPER4Android_FX/XHiFi.apk to your device.
Download FX: http://www.mediafire.com/download/cz6l67mk81zsyq4
Download XHIFI: http://www.mediafire.com/download/x7as12gmsk70spo
2. Install the apk as USER app or SYSTEM app is up to you. (v2.3.1.0 onwards)
3. Run FX/XHiFi app from app drawer, allow root access if asked.
4. When driver installation prompted, choose Yes.
5. V4A auto detects your CPU and show available driver modes below : No modes: For processors with or without VFP . Battery Saving: Available for all processors with NEON. High Quality Mode: Available for processors with NEON. Super Audio Quality: Available for processors with NEON.
6. Choose your desired selection.
7. After installation done, Reboot device. 8. Done..!! Enjoy....!!!!
Uninstallation:
1. Open up V4A FX (and xhifi), go to menu and choose “Uninstall driver”.
2. After that, uninstall V4A FX (and xhifi) app itself.
3. Reboot. Done.
>>>>>> DONT FORGET TO HIT THE THANKS BUTTON, IT IS FREE OF COST
REDSTRIKER said:
Hi friends...here is XLOUD+SRS+DOLBY+BEATS+ CLEAR AUDIO+ +CRISPY BASS sound enhancement in a single rom!!! :fingers-crossedcopyrights to:rwoksome and viper)
You will get awsome audio experiance!
NOTE:
1) This mod is for android ICS(4.0.X) and JB(4.1.X)!
2) This mod is for non-xperia devices! This mod is not for devices which comes with inbuilt beats,xloud and etc.,
3) I WILL NOT RESPONSIBLE FOR ANY KIND OF BRICK,DAMAGE! DO IT ON YOUR OWN RISK.....!
4) Please, remove/uninstall/delete library files of your any custom audio mod otherwise there is chances of getting bootloop!
5) BEFORE DOING ANYTHING YOU MUST HAVE A BACKUP OF YOUR SYSTEM!
6) This mode is not similar to acid or any other audio mods!
Q. WII THIS WORK WITH DSP MANAGER?
Ans. Yes, this will work with dsp manager but you will not needed dsp beacuse viper will provide you full control!!
Q. WILL THIS WORK WITH MY ******** ROM?
Ans. Yes, this works with all roms! if you still got any problem PM me!!!
Requirement:
1) Rooted device!
2)CWM
3)Root explorer!!
Procedure:
1) Download the RWOKSOME ENGINE 2 from here-
http://www.mediafire.com/?4bo9aovh99727yo
2) Flash this zip through CWM.
3) Now download VIPER from here,
link:http://www.mediafire.com/?pkbdfsii7ikn26l
4) Extract the correct folder according to your Android version. (Android 4.X)
5)Copy all the files inside that folder to your SD Card.
6) Use any Explorer with root access,copy libv4a_xhifi_ics.so(4.X is ics) to /system/lib/soundfx/ ,set permission to rw-r-r.
7)Go to /system/etc/ ,rename extension of audio_effects.conf(For Rom makers,delete this file,no need rename), example rename to .conf.bak.
Then copy the audio_effects.conf from your sdcard to here(/system/etc/),set permission to rw-r-r.
8) Go to /system/vendor/etc (if exists), rename extension of audio_effects.conf(For Rom makers,delete this file,no need rename), example rename to .conf.bak.
Then copy the audio_effects.conf from your sdcard to here(/system/vendor/etc/),set permission to rw-r-r.
9) Now install ViPER4Android_XHiFi.apk
10) Reboot! Enable viper.apk and set your own parameter! Enjoy!!!!!
>>>>>> DONT FORGET TO HIT THE THANKS BUTTON, IT IS FREE OF COST <<<<<<
Click to expand...
Click to collapse
Xperia? :'(
ahmad990 said:
Xperia? :'(
Click to expand...
Click to collapse
Hi...! Thread updated for Xperia devices....!!! Enjoy....!!!
Only for S IV Active stock rom odex / deodex.
EQ system fully control the sound system (music , video , internet , bluetooth..) .
For CWM
Installation:
1) Download the DSPManager_for_I9295 S IV Active.zip
2) Put the zip file on your SDcard
3) Reboot in Recovery mod
4) Select flash zip files
5) Select the zip files
6) Reboot
Remove:
1) Download the Remove_DSPManager_for_I9295 S IV Active.zip
2) Put the zip file on your SDcard
3) Reboot in Recovery mod
4) Select flash zip files
5) Select the zip files
6) Reboot
(Archive remove DSPManager with all its tails)
For users of Power Aimp:
To Power Aimp worked with DSPManager to go in the player :
Preferences / Sound / Advanced Settings / Disable direct control volume.
well done:good:
screens
works great Thanks! :good:
For stock rom odex / deodex.
EQ system fully control the sound system (music , video , internet , bluetooth..).
Backup before installing.
Installation:
1) Download the DSP+Beats_for_UMI_X2.zip
2) Put the zip file on your SDcard
3) Reboot in Recovery mod
4) Select flash zip files
5) Select the zip files
6) Reboot
P.S.
For users of PowerAMP :
To PowerAMP worked with DSPManager to go in the player :
Preferences / Sound / Advanced Settings / Disable direct control volume.
DSP Manager is the sound processing app. You can customize the equalizer manually or select preset options.
Requirement:
Custom recovery
Installation :
Download file
Install zip file from phone storage
Enter recovery
İf you want Make a backup
Select DSP MANAGER from storage
Install zip
Reboot
if you want high sound resampler add this line build prop
af.resampler.quality=4
Enjoy!
Download
Mega
Drive
Whats the difference between flashing that zip and installing the apk that is all over XDA?
Eminemiero said:
Whats the difference between flashing that zip and installing the apk that is all over XDA?
Click to expand...
Click to collapse
Added lib files. And easy install
For Android 7 visit my older thread.
Hi everybody,
I want to show you how to install Viper4android on your phone running developer preview 3 (and hopefully later with Android O.
IM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE!!
First download the zip from Androidfilehost.
Zip
https://www.androidfilehost.com/?fid=673368273298967857
Busybox (if needed)
https://www.androidfilehost.com/?fid=961840155545578665
Extract it to any folder, you will have two files now, a Viper4android App and a flashable Viper4android zip.
Reboot into recovery and install the zip, I also recommend a custom kernel like the Jolla Kernel which already has Android O support for loudness control (for my Nexus 5X).
Boot normally install BusyBox and launch Viper4android.
Select install drivers, grant root permission and wait until it is installed.
If a IO Error occurrs don't worry it'll work anyway.
Reboot and open any file manager.
Delete the Viper4android folder in "/system/priv-app".
Delete "/system/vendor/etc/audio_effects".
Install Viper4android app you downloaded before.
Reboot once again and open Viper4android - driver are working now.
Tested on my Nexus 5X with Android 8 developer preview 3.
Leave a like if it helped.
Reserved