DSP+Beats for UMI X2 and other 4.2 MT6589T / 6589 - Android General

For stock rom odex / deodex.
EQ system fully control the sound system (music , video , internet , bluetooth..).
Backup before installing.
Installation:
1) Download the DSP+Beats_for_UMI_X2.zip
2) Put the zip file on your SDcard
3) Reboot in Recovery mod
4) Select flash zip files
5) Select the zip files
6) Reboot
P.S.
For users of PowerAMP :
To PowerAMP worked with DSPManager to go in the player :
Preferences / Sound / Advanced Settings / Disable direct control volume.

Related

[MOD][ics/jb] audio enhancement

Hi friends...here is XLOUD+SRS+DOLBY+BEATS+ CLEAR AUDIO+ +CRISPY BASS sound enhancement in a single rom!!! :fingers-crossedcopyrights to:rwoksome and viper)
You will get awsome audio experiance!
NOTE:
1) This mod is for android ICS(4.0.X) and JB(4.1.X)!
2) This mod is for non-xperia devices! This mod is not for devices which comes with inbuilt beats,xloud and etc.,
3) I WILL NOT RESPONSIBLE FOR ANY KIND OF BRICK,DAMAGE! DO IT ON YOUR OWN RISK.....!
4) Please, remove/uninstall/delete library files of your any custom audio mod otherwise there is chances of getting bootloop!
5) BEFORE DOING ANYTHING YOU MUST HAVE A BACKUP OF YOUR SYSTEM!
6) This mode is not similar to acid or any other audio mods!
Q. WII THIS WORK WITH DSP MANAGER?
Ans. Yes, this will work with dsp manager but you will not needed dsp beacuse viper will provide you full control!!
Q. WILL THIS WORK WITH MY ******** ROM?
Ans. Yes, this works with all roms! if you still got any problem PM me!!!
Requirement:
1) Rooted device!
2)CWM
3)Root explorer!!
Procedure:
1) Download the RWOKSOME ENGINE 2 from here-
http://www.mediafire.com/?4bo9aovh99727yo
2) Flash this zip through CWM.
3) Now download VIPER from here,
link:http://www.mediafire.com/?pkbdfsii7ikn26l
4) Extract the correct folder according to your Android version. (Android 4.X)
5)Copy all the files inside that folder to your SD Card.
6) Use any Explorer with root access,copy libv4a_xhifi_ics.so(4.X is ics) to /system/lib/soundfx/ ,set permission to rw-r-r.
7)Go to /system/etc/ ,rename extension of audio_effects.conf(For Rom makers,delete this file,no need rename), example rename to .conf.bak.
Then copy the audio_effects.conf from your sdcard to here(/system/etc/),set permission to rw-r-r.
8) Go to /system/vendor/etc (if exists), rename extension of audio_effects.conf(For Rom makers,delete this file,no need rename), example rename to .conf.bak.
Then copy the audio_effects.conf from your sdcard to here(/system/vendor/etc/),set permission to rw-r-r.
9) Now install ViPER4Android_XHiFi.apk
10) Reboot! Enable viper.apk and set your own parameter! Enjoy!!!!!
>>>>>>>>>>> UPDATE<<<<<<<<<<<<<<
*Update for Xperia and all devices*
(All Copyrights to official viper4android team)......!!!!
Installation:
1. Download, extract and copy ViPER4Android_FX/XHiFi.apk to your device.
Download FX: http://www.mediafire.com/download/cz6l67mk81zsyq4
Download XHIFI: http://www.mediafire.com/download/x7as12gmsk70spo
2. Install the apk as USER app or SYSTEM app is up to you. (v2.3.1.0 onwards)
3. Run FX/XHiFi app from app drawer, allow root access if asked.
4. When driver installation prompted, choose Yes.
5. V4A auto detects your CPU and show available driver modes below : No modes: For processors with or without VFP . Battery Saving: Available for all processors with NEON. High Quality Mode: Available for processors with NEON. Super Audio Quality: Available for processors with NEON.
6. Choose your desired selection.
7. After installation done, Reboot device. 8. Done..!! Enjoy....!!!!
Uninstallation:
1. Open up V4A FX (and xhifi), go to menu and choose “Uninstall driver”.
2. After that, uninstall V4A FX (and xhifi) app itself.
3. Reboot. Done.
>>>>>> DONT FORGET TO HIT THE THANKS BUTTON, IT IS FREE OF COST
REDSTRIKER said:
Hi friends...here is XLOUD+SRS+DOLBY+BEATS+ CLEAR AUDIO+ +CRISPY BASS sound enhancement in a single rom!!! :fingers-crossedcopyrights to:rwoksome and viper)
You will get awsome audio experiance!
NOTE:
1) This mod is for android ICS(4.0.X) and JB(4.1.X)!
2) This mod is for non-xperia devices! This mod is not for devices which comes with inbuilt beats,xloud and etc.,
3) I WILL NOT RESPONSIBLE FOR ANY KIND OF BRICK,DAMAGE! DO IT ON YOUR OWN RISK.....!
4) Please, remove/uninstall/delete library files of your any custom audio mod otherwise there is chances of getting bootloop!
5) BEFORE DOING ANYTHING YOU MUST HAVE A BACKUP OF YOUR SYSTEM!
6) This mode is not similar to acid or any other audio mods!
Q. WII THIS WORK WITH DSP MANAGER?
Ans. Yes, this will work with dsp manager but you will not needed dsp beacuse viper will provide you full control!!
Q. WILL THIS WORK WITH MY ******** ROM?
Ans. Yes, this works with all roms! if you still got any problem PM me!!!
Requirement:
1) Rooted device!
2)CWM
3)Root explorer!!
Procedure:
1) Download the RWOKSOME ENGINE 2 from here-
http://www.mediafire.com/?4bo9aovh99727yo
2) Flash this zip through CWM.
3) Now download VIPER from here,
link:http://www.mediafire.com/?pkbdfsii7ikn26l
4) Extract the correct folder according to your Android version. (Android 4.X)
5)Copy all the files inside that folder to your SD Card.
6) Use any Explorer with root access,copy libv4a_xhifi_ics.so(4.X is ics) to /system/lib/soundfx/ ,set permission to rw-r-r.
7)Go to /system/etc/ ,rename extension of audio_effects.conf(For Rom makers,delete this file,no need rename), example rename to .conf.bak.
Then copy the audio_effects.conf from your sdcard to here(/system/etc/),set permission to rw-r-r.
8) Go to /system/vendor/etc (if exists), rename extension of audio_effects.conf(For Rom makers,delete this file,no need rename), example rename to .conf.bak.
Then copy the audio_effects.conf from your sdcard to here(/system/vendor/etc/),set permission to rw-r-r.
9) Now install ViPER4Android_XHiFi.apk
10) Reboot! Enable viper.apk and set your own parameter! Enjoy!!!!!
>>>>>> DONT FORGET TO HIT THE THANKS BUTTON, IT IS FREE OF COST <<<<<<
Click to expand...
Click to collapse
Xperia? :'(
ahmad990 said:
Xperia? :'(
Click to expand...
Click to collapse
Hi...! Thread updated for Xperia devices....!!! Enjoy....!!!

Install / Remove DSPManager for I9295 S IV Active stock rom odex / deodex.

Only for S IV Active stock rom odex / deodex.
EQ system fully control the sound system (music , video , internet , bluetooth..) .
For CWM
Installation:
1) Download the DSPManager_for_I9295 S IV Active.zip
2) Put the zip file on your SDcard
3) Reboot in Recovery mod
4) Select flash zip files
5) Select the zip files
6) Reboot
Remove:
1) Download the Remove_DSPManager_for_I9295 S IV Active.zip
2) Put the zip file on your SDcard
3) Reboot in Recovery mod
4) Select flash zip files
5) Select the zip files
6) Reboot
(Archive remove DSPManager with all its tails)
For users of Power Aimp:
To Power Aimp worked with DSPManager to go in the player :
Preferences / Sound / Advanced Settings / Disable direct control volume.
well done:good:
screens
works great Thanks! :good:

[MOD][SOUND] Dsp Sound Manager

DSP Manager is the sound processing app. You can customize the equalizer manually or select preset options.
Requirement:
Custom recovery
Installation :
Download file
Install zip file from phone storage
Enter recovery
İf you want Make a backup
Select DSP MANAGER from storage
Install zip
Reboot
if you want high sound resampler add this line build prop
af.resampler.quality=4
Enjoy!
Download
Mega
Drive
Whats the difference between flashing that zip and installing the apk that is all over XDA?
Eminemiero said:
Whats the difference between flashing that zip and installing the apk that is all over XDA?
Click to expand...
Click to collapse
Added lib files. And easy install

[GUIDE] How to maximize volume of any android using DIRAC

We are going to use 'Dirac' sound module extracted from OPPO smartphones by ARISE team to increase sound of any device.
We will install Dirac using 'ARISE sound system zip'
REQUIREMENTS-
*ROOT ACCESS
*Custom Recovery (TWRP RECOMMENDED)
INSTRUCTIONS-
1. Download ARISE SOUND SYSTEM ZIP and arise_customize.prop from links given below.
2. Now move "arise_customize.prop" to your internal storage.
* - optional steps - If you just want "loud sound", skip these
*If you want additional sound mods like viper4android Dolby etc, you need to open "arise_customize.prop" and write true in front of whatever MOD you want.
*I advice "mediatek" users "not to use ice mods" as it sometimes stops other modules like Viper4android and Dolby
3. Now boot your device into recovery mode (TWRP RECOMMENDED)
You don't need to wipe "anything"
Just "dirty flash" it
4. Flash the ARISE Zip
If you want to uninstall any module just scroll down and set "uninstall_module" value to "true" and flash the zip again
DOWNLOADS-
ARISE ZIP
arise_customize.prop
VIDEO TUTORIAL-
https://www.youtube.com/watch?v=iTwXjXXv6vA&t=51s​

HOW TO CHANGE BOOT ANIMATION IN SM-J8

HOW TO CHANGE BOOT ANIMATION IN SM-J8 ~vks
Any bootanimation.zip should work , just search on google or xda
IMPORTANT, NEEDS LINEAGE 17, or any other rom , other than stock
PREPARATION:
1.Dwnload bootanimation.zip file
2.Check the file using Boot animation changer
( https://play.google.com/store/apps/details?id=com.jrummy.apps.boot.animations )
a. Grant root permission
b. Install from local
c. If it opens, play it , and make sure it is in 720p
d. if it dosent, extract your file , and the try again from step a.
e. It is possible your file was corrupt so don't sweat it
f. installing from app dosent work
3. Root explorer method will not work
4. Proceed to procedure.
PROCEDURE
1.Samsung uses .qmg format so grab that Lineage17.gsi (tested) (or any other gsi/rom , tested on havoc too)
2.After you have successfully completed the lineage17 install
3.Grab your desired bootanimation.zip and save it somewhere accessible
4.Boot into recovery (TWRP recommended , TESTED)
5.Mount > system , back
6.Advanced>File manager
7.It would be a good idea to check the bootanimation folder first
8.System_root > system > media
9.Rename it to bootanimation.ziplineage (anything will do )
10.Back to root directory , then navigate to your bootanimation folder and copy your file to step(8.) folder ( while copying you will not be able to see the previous zip)
11.Back to root , navigate to step(8.) Folder , rename your copied file to bootanimation.zip (important)
12.Reboot to enjoy
Issues:
1.None , in the worst case you will not have an Bootanimation cuz you deleted it , fix it by placing a working one .
2.For the best experience use 720p files , 1080p , and 1440p files get zoomed in center .
3.No bootloop or crash encountered , so it's safe .
4. DONT DO THIS IN STOCK OS.
@vanshksingh
SAMSUNG J8/On8 OFFICIAL
Da Rules : 1. English and Hindi Only 2. Offtopic = a lil bit. 3. ETA = allowed 4. Respect All Admins 5. Reviewers always allowed.
t.me

Categories

Resources