These are the instructions on how to flash stock firmware on Lava Iris X5
Requirements : Your Android device should have atleast 20-30 percent of battery to perform the Flashing Process.
Step 1 : Download This link. https://docs.google.com/uc?id=0B3qYFBKKL2hic0F1SEtZdDhuV3M and extract Broadcom MultiDownloader Tool and Drivers. After Extracting you will be able to see
the following files:
Step 2 : Install the USB Drivers.
Step 3 : Power Off your Android Device.
Step 4 : Download the Stock Rom of your Android Device and extract it on your Computer.
Step 5 : Now, Open Broadcom MultiDownloader.exe (you have extracted this in Step#1 ) on Your Computer.
Step 6 : Once Broadcom MultiDownloader Tool is launched,
Click on Settings and select the Configuration .
Step 7 : Now, Under Configuration you have to define the firmware path. To locate the firmware folder (that you have downloaded in Step#4) Click on [...] Button and select the firmware folder.
Step 8 : Now you have added the firmware folder in Broadcom MultiDownloader tool successfully. Now click on Apply button to continue.
Step 9 : Now, Connect your Android Device to the Computer
(make sure it is power off and Press the Volume UP and Down together, connect the phone to the computer at the same time).
Step 10 : Once you have successfully added the Android Device to the computer then Broadcom MultiDownloader
Tool will detect it and show it.
Step 11 : Now, Click on the Start All Button to begin the Flashing Process.
Step 12 : Now, Broadcom MultiDownloader Tool will flash the Stock rom on your Android Device.
Step 13 : Once Flashing is completed, you will be able to see Green OK Status.
Step 14 : Now, close Broadcom MultiDownloader Tool and disconnect your Android Device from the computer.
Congratulations, Now your Lava Iris X5 is successfully
running the Stock Rom you have Downloaded.
image path not found
select manually
Sent from my Redmi 3S using XDA Free mobile app
Related
Below is the direct link to download the Gionee F103 Stock Firmware (flash file) from GoogleDrive. Firmware contains Flash Tool, Driver and instructions.
Gionee_F103_0203_T5293.zip
" https://docs.google.com/uc?id=0Bxbxl3u2_t15U2dTbnhYODRaNlk "
Gionee_F103_0203_T5346.zip
" https://docs.google.com/uc?id=0Bxbxl3u2_t15dE9sbXU3NV8zRU0 "
Gionee_F103_0203_T5616.zip
" https://docs.google.com/uc?id=0B3MWIAQ-re4KQ1hLZHFOUWRqd0k "
How to Flash
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:
[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
Hi,
Information like this for Android devices with no dedicated section would go here,
http://forum.xda-developers.com/android/general
XDA Assist is here to help members navigate the site , not for guides.
Thanks! I'll close this thread.
How To Flash Samsung Galaxy Star Pro Duos Stock ROM using odin
Please follow the instruction carefully, it may brick your phone.
Step 1 : Download & install Odin (latest version) on your computer.
Step 2 : Download and install Samsung USB driver on your computer.
Step 3 : Download Stock ROM from below link.
Step 4 : Open Odin
Step 5 : Tick Auto Reboot & F. Reset boxes.
Step 6: Click the PDA and browse the *.tar or *.tar.md5 files this is a ROM file which you downloaded.
Step 7 : Switch off your phone.
Step 8 : Press & hold ( Volume down + Home + Power ) key to go to download mode.
Step 9: Insert USB cable to your phone.
.
Step 10 : Click the START botton and wait for a few minutes to complete flashing.
Step 11 : After flashing complete, you will see a green (PASS) bar on the top like below image.
Download link:- http://odindownloadxda.com/
Download stock rom from :- sammobile.com
Requirements For Root Symphony i50:
1. Windows PC
2. Mobile
3. installment of usb/vcom drivers
4. SuperSU
Disclaimer:
I am not responsible for bricked devices.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Download Require Files - Here>>
And Extract
Step 1 : First install the vcom & usb drivers
Step 2: Copy "SuperSU.zip" in your phone memory.
Step 2 : Now open sp flash tools & select scatter file "MT6580_Android_scatter.txt" with recovery.img.
Step 3 : Remove battery From Phone, Click "Download" on sp flash tool & Connect USB With Cable with PC,
Wait till Successfull.
Step 4 : Now connect battery & press on Vollum Up key and power key at same time.
Step 5 : Press on install button and Select "SuperSU.zip"
Step 6: Now Swipe on install Button.
Step 7 : After successfully instaling supersu, reboot the system.
A Video example (its for i10) - https://www.youtube.com/watch?v=A-hbCWRHaYw&feature=youtu.be
Hit Thanks if you success.
It worked now my i50 is rooted now but i need a cm14 custom rom for it can you help? Please
I need a Symphony i18 twrp or root
Place help us
Need CWM recovery zip file for Symphony Z15
My device name is Symphony Z15 I need CWM recovery zip file,plz help.
How To Flash Idea Alcatel One Touch 5036D done by Smart Phone Help
flash tool https://spflashtools.com/windows/sp-flash-tool-v5-1812
Firmware 1: http://infopade.com/4sSA
Password: touch
if the above firmware doesn't work for you, try this
Firmware 2: http://infopade.com/4sWN
Password - Gsmtel.in
like video: https://youtu.be/lwN-BLvenEo
Thanks for watching, & please remember to Like this video, if it helped you. I will answer all comments below,
Be sure to share with your friends. !!
Please Reply Me For More Future Videos !!
Once Again, Thanks For Watching Subscribe for more future videos
Steps:
- Step 1: Download and Install the android USB drivers on your computer. In case you have already installed them, you can skip this step.
Step 2: Switch off you Android Phone .
Step 3: Now download the stock ROM or the custom ROM which you want to install on your phone. After downloading, extract the zip file on you system.
Step 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
Step 5: Form the files listed run the Flash_tool.exe file.
Step 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side.
Step 7: Now locate the scatter file in your custom or stock ROM. It is generally located in the bin/directory.
Step 8: Now click the Download button to start the downloading process.
Step 9: After completed all the above steps, connect your smart phone to your system using the USB cable and press any button other than power button so that your system will detect your device. You can use volume buttons.
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your device and switch it ON.
Requirements:- Your phone must have atleast 40-50% of battery and USB Drivers
how to unbrick zte blide v7 lite with original Firmware and twrp and fix nvram and root
The Stock Firmware is a better option for MTK users who love security and warranty while the Custom ROM is a perfect fit for users who prefer customization and control. Stock ROMs come with premium features that aren't found in pure Android operating systems.
Instructions to Install Stock Firmware:
1. Download Firmware zip file is given above and extract it in your computer.
2. Download MTK USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.
3. Next, switch off your smartphone and take away the battery (it’s removable).
4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.
5. As soon as SP Flash tool is launched, click on on “Download” tab.
6. Now, click on on “Scatter-loading” button within the download tab.
7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.
8. Now click on on the “Download” button to start out the flashing process.
9. Next, join your Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.
10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.
11. Now, shut SP Flash tool in your computer and unplug your smartphone.
That’s it. Now you’ve successfully flashed Stock ROM on your MTK device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.
visit tutorial here : https://hygodroid.blogspot.com/2019/10/how-to-unbrick-zte-blide-v7-lite-and.html