[Q&A] [ROM] [stock 4.1.2] Droid Nexesque v3.6 XT925/XT926 "Fast, Stable & Relia - RAZR HD Q&A, Help & Troubleshooting

[Q&A] [ROM] [stock 4.1.2] Droid Nexesque v3.6 XT925/XT926 "Fast, Stable & Relia
Q&A for [ROM] [stock 4.1.2] Droid Nexesque v3.6 XT925/XT926 "Fast, Stable & Reliable"
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [stock 4.1.2] Droid Nexesque v3.6 XT925/XT926 "Fast, Stable & Reliable". If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

HELP!!
Looking at your Rom seems very promising. I would very much like to try it out however I keep running into multiple problems.
I almost bricked my phone so I had to flash a whole new stock 4.4.2 Rom on my Razr HD. I have bootloader unlocked and my problem with this rom seems to occur when I use my recovery. I used TWRP and CWM and both havent worked well when trying to flash this ROM. sometimes it says it installed no problem, but when I reboot it loads into a bootloop and then i have to constatly flash a new recovery all over again. I also flashed the xt925 .img and still nothing any ideas?

LordHrseMeat said:
Looking at your Rom seems very promising. I would very much like to try it out however I keep running into multiple problems.
I almost bricked my phone so I had to flash a whole new stock 4.4.2 Rom on my Razr HD. I have bootloader unlocked and my problem with this rom seems to occur when I use my recovery. I used TWRP and CWM and both havent worked well when trying to flash this ROM. sometimes it says it installed no problem, but when I reboot it loads into a bootloop and then i have to constatly flash a new recovery all over again. I also flashed the xt925 .img and still nothing any ideas?
Click to expand...
Click to collapse
Downgrade to JBBL since this is a JBBL ROM
Sent from my ATRIX HD using XDA Free mobile app

Droid Nexesque v3.6 XT925/XT926 ROM problem
Hello everyone!
I`ve flashed this rom on my XT926, and it works nicely, but I have a problem. The Wi-Fi doesn`t work at all. It says the connection is poor, yet I`m standing next to the wireless router. I`ve tried v3.5 and v3.6 with the same result. How can I fix this issue? I use Wi-Fi all the time, because my data plan sucks.
Thanks

krollie78 said:
Hello everyone!
I`ve flashed this rom on my XT926, and it works nicely, but I have a problem. The Wi-Fi doesn`t work at all. It says the connection is poor, yet I`m standing next to the wireless router. I`ve tried v3.5 and v3.6 with the same result. How can I fix this issue? I use Wi-Fi all the time, because my data plan sucks.
Thanks
Click to expand...
Click to collapse
What rom did you come from before flashing this?
Sent from my ATRIX HD using XDA Free mobile app

palmbeach05 said:
What rom did you come from before flashing this?
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
I`ve had cyanogen mod, but I don`t know which version.

krollie78 said:
I`ve had cyanogen mod, but I don`t know which version.
Click to expand...
Click to collapse
:extremely confused: cyanogenmod is not something someone doesn't know what version they're on. Everyone knows what version they're on. What did the boot animation look like?
Sent from my ATRIX HD using XDA Free mobile app

palmbeach05 said:
:extremely confused: cyanogenmod is not something someone doesn't know what version they're on. Everyone knows what version they're on. What did the boot animation look like?
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
I don`t know because I didn`t put in on the phone, I`ve bought the phone already flashed.
It was that light blue face, with blue arrow going around it, on a black background.

krollie78 said:
I don`t know because I didn`t put in on the phone, I`ve bought the phone already flashed.
It was that light blue face, with blue arrow going around it, on a black background.
Click to expand...
Click to collapse
That is cm11. You need to read the first post and read what it says about coming from an android version after 4.1.2, flash what it tells you to flash, then reflash this rom
Sent from my ATRIX HD using XDA Free mobile app

palmbeach05 said:
That is cm11. You need to read the first post and read what it says about coming from an android version after 4.1.2, flash what it tells you to flash, then reflash this rom
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
That was the first thing I did. I`ve flashed that smaller file first, and than the ROM.
Now I`ve tried it again, wiped everything, flashed the 5 MB or so file, than the ROM, but no luck. What else can I do? I really need this phone to work.

krollie78 said:
That was the first thing I did. I`ve flashed that smaller file first, and than the ROM.
Now I`ve tried it again, wiped everything, flashed the 5 MB or so file, than the ROM, but no luck. What else can I do? I really need this phone to work.
Click to expand...
Click to collapse
Sorry for the late reply. I hope you were able to get it installed or flashed another Rom.
No one else is having that issue. Could of been a bad download. Please re download the Rom and supporting file and try again.
Please note that you have to mount the system within your recovery before flashing the files.

Help I can't get signals baseband unknown imei unknown
I tried installing this rom but was unsuccessful now I can't get signals on my previous rim and others have tried. My baseband is showing unknown and imei unknown. Pls solution needed.

Hope everyone is still enjoying this Rom. I've actually donated my Razr HD to a needy family in Mexico.
.: Sent from an optimized 'ANDROID til I die' device :.

Related

[Q] Stuck in cyanogen mod! no recovery! No wifi! HELP!

Hey guys, i have a motorolla droid 3. xt862. I am running cyanogen mod 7 and it is rooted. i flashed the Blur_Version.5.6.890.XT862.Verizon.en.US file using stock recovery and now the droid 3 bootstrap is gone and wifi wont work. im stuck with cm7 which doesnt work. I would just like to go back to the way it was when i got it stock rom and everything. I have no interest in custom roms because absolutely nothing works and it is all very buggy. Please i need help urgently! i hope im not stuck
is there anyway to go back to gingerbread 2.3.4? i can't seem to get rid of cyanogen mod 7 because i have no bootstrap and i can't install it again.
It sounds like you did an RUU? ? ?
That should have gotten you back to stock. Basically you need to get a working RUU version, of the latest OTA and run that. Or get a rooted stock rom.
Sent from my PC36100 using xda premium
imheroldman said:
It sounds like you did an RUU? ? ?
That should have gotten you back to stock. Basically you need to get a working RUU version, of the latest OTA and run that. Or get a rooted stock rom.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Based on what a friend is saying this seem to be the solution. Please reply and tell us if this solution help you @watermummy7.
Yes I've got it working again. I used an sbf file and installed it. Re-rooted and now im good. I just can't see myself ever using a custom rom again. There's not 1 out there that's not buggy.. what are some good hacks/mods for the droid 3? I've heard of ubuntu for android from there website but its still in development
Sent from my DROID3 using XDA App
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A

reset problem!!!

hi .. I'm s-off of the original rum a custom rom did all that stuff, but even though I tried all of them opens a special rums resetleniyor locked all the time. When I do not have a hardship original rom. custom rom, but the crashes constantly. telefnı not available.
explanation
hello there. I have a very big problem. Dana was trying to install this before, but out of curiosity, because the original rom rom installed on the phone. and now I can not run this rom. clockworkmod installed. I've tried them all, but a special rums. Once opened, or opening animation continuously during the phone resets. If the screen is turned off, no problem. but I wanted to make the process open and locked lock resetleniyor phone. please help me. I have to use the original rom in this way.
You need to supply more details such as what ROM you are trying to put on, CWM version you are using hboot version and any other relevant information specific to your phone. No one can help you if you don't supply any specific information
Sent from my Sensation using xda premium
problem
h4ck3rc1 said:
You need to supply more details such as what ROM you are trying to put on, CWM version you are using hboot version and any other relevant information specific to your phone. No one can help you if you don't supply any specific information
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
added a video. cmw 6.0, and MIUI 8.2.31 custom rom installed. I would like to. phone is locked, and the freezing happens a problem at all. After 1 or 2 seconds after the lock is locked reset. I've had the same problem in cm-10 custom rom. When I install the original rom, but do not have a problem at all. When I install the original rom ics sense trouble using 3.0 and 3.6.
you tube.com/watch?v=p83DnlqrM84
Have you tried updating your firmware version? Have you made sure you are using the correct version of the ROM?
Sent from my Sensation using xda premium
h4ck3rc1 said:
Have you tried updating your firmware version? Have you made sure you are using the correct version of the ROM?
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
I tried her too negative, but the result
problem is solved. established in different firmwire
Glad I could help
Sent from my Sensation using xda premium

I need help!

Hey everyone I've been flashing different ROMs trying to fox this problem but nothing seems to help. My phone gets the black screen and random reboots probably every 20 mins or so. Its pissing me off bad! Wiped everything possible 3x before I flash any ROM jb/ics and even dark side wipe 3x too and nothing helps. It still does it. I'm almost to the point of throwing this thing against the wall and using some pos go phone lol. Can someone please help me! Thanks
Sent from my SGH-I727 using xda app-developers app
oneslow5oh said:
Hey everyone I've been flashing different ROMs trying to fox this problem but nothing seems to help. My phone gets the black screen and random reboots probably every 20 mins or so. Its pissing me off bad! Wiped everything possible 3x before I flash any ROM jb/ics and even dark side wipe 3x too and nothing helps. It still does it. I'm almost to the point of throwing this thing against the wall and using some pos go phone lol. Can someone please help me! Thanks
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Without knowing what ROM you're using no one can help you. Random reboots still happen in Jellybean but they aren't every 20 minutes. Download the stable CM9 for your phone and try installing that. If you still get random reboots you have either a defective phone (not likely) or you're doing something wrong.
I'm on orthus one and it happens to me one literally every ROM I try including the stable cm9. Idk what I'd be doing wrong. I'm on sk8s latest recovery if that helps. Should I just odin back to stock and go from there?
Sent from my SGH-I727 using xda app-developers app
oneslow5oh said:
I'm on orthus one and it happens to me one literally every ROM I try including the stable cm9. Idk what I'd be doing wrong. I'm on sk8s latest recovery if that helps. Should I just odin back to stock and go from there?
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
What was your original ROM? Are you coming straight from stock ICS to the customized ROMs or are you coming from an older android version?
UZ7 said:
What was your original ROM? Are you coming straight from stock ICS to the customized ROMs or are you coming from an older android version?
Click to expand...
Click to collapse
i bought the phone from craigslist a few months ago and it was stock ics ota im assuming. so it was stock ics unrooted to rooted then custom roms. flashing the stock att md5 through odin right now. hopefully thatll work
oneslow5oh said:
i bought the phone from craigslist a few months ago and it was stock ics ota im assuming. so it was stock ics unrooted to rooted then custom roms. flashing the stock att md5 through odin right now. hopefully thatll work
Click to expand...
Click to collapse
That's what I was going to suggest, make sure it's stock from the files on here.
This needs moved to q&a
Sent from my SGH-I727 using Tapatalk 2
whosgotlag said:
That's what I was going to suggest, make sure it's stock from the files on here.
Click to expand...
Click to collapse
thanks. i did all that rooted it and got cwm on it gonna flash embryo and stop flashing roms like 5 times a day lol. so far so good though. thanks again
oneslow5oh said:
thanks. i did all that rooted it and got cwm on it gonna flash embryo and stop flashing roms like 5 times a day lol. so far so good though. thanks again
Click to expand...
Click to collapse
Make sure you're on a higher version of CWM or get on TWRP, the recovery may have had a lot to do with it
Cheers, hope it works.
Wrong Section. Moved
whosgotlag said:
Make sure you're on a higher version of CWM or get on TWRP, the recovery may have had a lot to do with it
Cheers, hope it works.
Click to expand...
Click to collapse
Flashed liquid rc1 v2 last night and its running great! No reboots or anything(knock on wood) odining to stock definitely did the trick. Thanks again
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Originally Posted by oneslow5oh
Flashed liquid rc1 v2 last night and its running great! No reboots or anything(knock on wood) odining to stock definitely did the trick. Thanks again
Click to expand...
Click to collapse
I'm running Liquid rc1 v2 myself - it's buttah smooth! Check out TWRP recovery - it's a must for flashaholics. You can download the goo manager from playstore and install the recovery or flashable version available in dev section. Try it and you'll be hooked.

Please help! Sph-d710bst need root support

I want to start by saying i am very new to rooting, kernels, roms etc. so if someone could help me with some detailed steps i would greatly appreciate it. I recently purchased my sph d710bst (i know is pretty old) and have it currently rooted with AGATS fi27 kernel v0.6.8. Everything works great but I'm getting a little tired of the ROM. I've tried flashing new kernels through odin (pc) so i can get CM, AOKP or really any new kernel and ROM lol. But i haven't been able to successfully flash anything. After the kernel flash and loading the ROM through recovery i always get (status 7). On top of all that, nothing seems to be compatible with my device as I've found after purchasing the pro versions of everything ( mobile Odin, ROM manager, etc). Again any help would be greatly appreciated! Thanks guys!
Sent from my SPH-D710BST using xda premium
Im having the same problem, ive looked everwhere and can not find any roms or kernel for the SPH-d710bst epic 4g gs2. I have read that all kernels for the SPH-d710 should work how ever ive tryed a bunch and it bricks it. I did get a nightly cyanomod to work but it took a big of work and i didnt use a gapp so i didnt have the google stuff nor did i have data. I am waiting for a stable one to come out and ill use that, the gapp and jp's modems and it will work. You can try that with the nightly cyanomod, but make sure u get the gapp and jp modems for data, also u must have bussybox and it says cmm but agat worked for the flash then after the flash do a factorywipe wipchetch and dev and then reflash cmod then gapp the modem then boom u should be good. Ps if phone gets bricked just use jp's stock one click "wit data".Psps: If anyone has any other known mods kernel or roms please list them for us.
Sent from my SPH-D710BST using xda app-developers app
Ok i read more on the mod and i guess your not sapost to use jb modems just use a ics modem if need be
Sent from my SPH-D710BST using xda app-developers app

[Q] Issue with samsung galaxy sgh t959v upgrade to JB

HI Gurus,
I own the samsung galaxy sgh t959v running on official tmobile stock gigerbread 2.3.6. Recently, I've tried to update it to run on JellyBean(4.1.1) trying to follow the below tutorial.
First you need the ODIN files(to go back to stock) : goo.gl/An7S (scroll down for where it says download and download the 4 files in there )
put this file in your sd card with the other one . if you dont have this file then you wont be able to use recovery mod :goo.gl/FuHFJ
Then you need to root your phone : goo.gl/oW4WO
USE THIS LINK (FOR ROOT)IF NOT FIRST ONE WORKING : dl.dropbox.com/u/13517705/SGH-
Then you gotta update your phone to CM-7 (gingerbread)(2.3.7) : goo.gl/rjFRj
then , you need chimera 2.2 ( ICS )(4.0.4) : d-h.st/uwi
and finally , you need to install panaroid android(JB)(4.1.1): goo.gl/Frl3z
gapps : goo.gl/jN55d
Click to expand...
Click to collapse
However, I've landed on a weird situation as shown in the attached image. Steps that pushed me into it are as below.
successfully rooted my phone using the steps from
galaxyforums.net/forum/off-topic-forum/5053-rooting-tutorial-here-posted-permission-t-mobile-galaxy-s-4g-gingerbread.html
Click to expand...
Click to collapse
tried update my phone to CM-7 (gingerbread)(2.3.7) : goo.gl/rjFRj only to land into this problem.
I am not able to boot up to download mode either so that I can re-flash the basic stock version.
tried installing chimera 2.2 ( ICS )(4.0.4) : d-h.st/uwi as well but no luck.
I've tried everything from trying to wipe out the data/factory reset.
Any help is greatly appreciated!
Thanks in advance,
Madhu
You flashed vibrant (SGH-T959) ROM and recovery and not SGS 4G (SGH-T959V).
These are 2 completely different devices.
I hope you haven't bricked your phone.
Try the one-click back to stock - specifically section 2...
and if it works, flash only ROMs appearing in this forum development section.
Good luck!
It works
itzik2sh said:
You flashed vibrant (SGH-T959) ROM and recovery and not SGS 4G (SGH-T959V).
These are 2 completely different devices.
I hope you haven't bricked your phone.
Try the one-click back to stock - specifically section 2...
and if it works, flash only ROMs appearing in this forum development section.
Good luck!
Click to expand...
Click to collapse
Thank you so much dear itzik2sh. that works! I am back to stock android now.
on the similar lines, can I pick up the any of the ROMs listed here
forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V/List_of_ROMs
Click to expand...
Click to collapse
Regards,
Madhu
madhukp1 said:
Thank you so much dear itzik2sh. that works! I am back to stock android now.
on the similar lines, can I pick up the any of the ROMs listed here
Regards,
Madhu
Click to expand...
Click to collapse
sure can!
gotta have root/cwm first though
madhukp1 said:
Thank you so much dear itzik2sh. that works! I am back to stock android now.
on the similar lines, can I pick up the any of the ROMs listed here
Regards,
Madhu
Click to expand...
Click to collapse
You can flash any of the ROMs listed in these SGS4G forums. However, make sure you read the instructions carefully for each ROM, as some require you to have already been on an ICS ROM due to file system changes. Do not flash anything for the Vibrant or any other phone or you will have serious problems. Good luck!
Sent from my SGH-T959V using xda app-developers app
cpkelley94 said:
You can flash any of the ROMs listed in these SGS4G forums. However, make sure you read the instructions carefully for each ROM, as some require you to have already been on an ICS ROM due to file system changes. Do not flash anything for the Vibrant or any other phone or you will have serious problems. Good luck!
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Revision, every JB and up ROM requires you to be on an ICS ROM first
Sent from my SGH-T959V using xda app-developers app
Cooptx said:
Revision, every JB and up ROM requires you to be on an ICS ROM first
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
No they don't. They will all allow you to flash from stock gb as long as you have cwm 5.x
Ah, my bad
Sent from my SGH-T959V using xda app-developers app
FBis251 said:
No they don't. They will all allow you to flash from stock gb as long as you have cwm 5.x
Click to expand...
Click to collapse
Antonx basic with a twist or bhundvens blastoff v2.5 are two good ones to use
If you don't care for GPS - I'd go with one of our great aries 4.2.2 ROMs.
till this fuctionality is added,
If you want a GPS on your daily driver, you'll have to flash an ICS ROM, such as
AOKP, CM9, HebMIUI, Ultragen....
Issue resolved
Hi Guys,
Thanks you all for the wonderful suggestions. I've now upgraded my sgs4g to ICS on CyanogenMod 9.1.0
forum.xda-developers.com/showthread.php?t=1730954
Click to expand...
Click to collapse
and enjoying the awesome rom the developers have come up with. battery backup seems to be pretty good.
However, I had to execute an additional step which was not there in the instructions i.e., after
step 5. Flash the ROM using CWM/TWRP
Click to expand...
Click to collapse
phone boots up to ClockworkMod Recovery (CWM) 6.0.1.2. Then I had to install cm-9-20130227-UNOFFICIAL-galaxys4gmtd.zip once again to finish the process. Hope I've not missed something here.
itzik2sh, I'll give a try to the latest aries 4.2.2 ROMs sometime later.
Regards,
Madhu

Categories

Resources