HI Gurus,
I own the samsung galaxy sgh t959v running on official tmobile stock gigerbread 2.3.6. Recently, I've tried to update it to run on JellyBean(4.1.1) trying to follow the below tutorial.
First you need the ODIN files(to go back to stock) : goo.gl/An7S (scroll down for where it says download and download the 4 files in there )
put this file in your sd card with the other one . if you dont have this file then you wont be able to use recovery mod :goo.gl/FuHFJ
Then you need to root your phone : goo.gl/oW4WO
USE THIS LINK (FOR ROOT)IF NOT FIRST ONE WORKING : dl.dropbox.com/u/13517705/SGH-
Then you gotta update your phone to CM-7 (gingerbread)(2.3.7) : goo.gl/rjFRj
then , you need chimera 2.2 ( ICS )(4.0.4) : d-h.st/uwi
and finally , you need to install panaroid android(JB)(4.1.1): goo.gl/Frl3z
gapps : goo.gl/jN55d
Click to expand...
Click to collapse
However, I've landed on a weird situation as shown in the attached image. Steps that pushed me into it are as below.
successfully rooted my phone using the steps from
galaxyforums.net/forum/off-topic-forum/5053-rooting-tutorial-here-posted-permission-t-mobile-galaxy-s-4g-gingerbread.html
Click to expand...
Click to collapse
tried update my phone to CM-7 (gingerbread)(2.3.7) : goo.gl/rjFRj only to land into this problem.
I am not able to boot up to download mode either so that I can re-flash the basic stock version.
tried installing chimera 2.2 ( ICS )(4.0.4) : d-h.st/uwi as well but no luck.
I've tried everything from trying to wipe out the data/factory reset.
Any help is greatly appreciated!
Thanks in advance,
Madhu
You flashed vibrant (SGH-T959) ROM and recovery and not SGS 4G (SGH-T959V).
These are 2 completely different devices.
I hope you haven't bricked your phone.
Try the one-click back to stock - specifically section 2...
and if it works, flash only ROMs appearing in this forum development section.
Good luck!
It works
itzik2sh said:
You flashed vibrant (SGH-T959) ROM and recovery and not SGS 4G (SGH-T959V).
These are 2 completely different devices.
I hope you haven't bricked your phone.
Try the one-click back to stock - specifically section 2...
and if it works, flash only ROMs appearing in this forum development section.
Good luck!
Click to expand...
Click to collapse
Thank you so much dear itzik2sh. that works! I am back to stock android now.
on the similar lines, can I pick up the any of the ROMs listed here
forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V/List_of_ROMs
Click to expand...
Click to collapse
Regards,
Madhu
madhukp1 said:
Thank you so much dear itzik2sh. that works! I am back to stock android now.
on the similar lines, can I pick up the any of the ROMs listed here
Regards,
Madhu
Click to expand...
Click to collapse
sure can!
gotta have root/cwm first though
madhukp1 said:
Thank you so much dear itzik2sh. that works! I am back to stock android now.
on the similar lines, can I pick up the any of the ROMs listed here
Regards,
Madhu
Click to expand...
Click to collapse
You can flash any of the ROMs listed in these SGS4G forums. However, make sure you read the instructions carefully for each ROM, as some require you to have already been on an ICS ROM due to file system changes. Do not flash anything for the Vibrant or any other phone or you will have serious problems. Good luck!
Sent from my SGH-T959V using xda app-developers app
cpkelley94 said:
You can flash any of the ROMs listed in these SGS4G forums. However, make sure you read the instructions carefully for each ROM, as some require you to have already been on an ICS ROM due to file system changes. Do not flash anything for the Vibrant or any other phone or you will have serious problems. Good luck!
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Revision, every JB and up ROM requires you to be on an ICS ROM first
Sent from my SGH-T959V using xda app-developers app
Cooptx said:
Revision, every JB and up ROM requires you to be on an ICS ROM first
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
No they don't. They will all allow you to flash from stock gb as long as you have cwm 5.x
Ah, my bad
Sent from my SGH-T959V using xda app-developers app
FBis251 said:
No they don't. They will all allow you to flash from stock gb as long as you have cwm 5.x
Click to expand...
Click to collapse
Antonx basic with a twist or bhundvens blastoff v2.5 are two good ones to use
If you don't care for GPS - I'd go with one of our great aries 4.2.2 ROMs.
till this fuctionality is added,
If you want a GPS on your daily driver, you'll have to flash an ICS ROM, such as
AOKP, CM9, HebMIUI, Ultragen....
Issue resolved
Hi Guys,
Thanks you all for the wonderful suggestions. I've now upgraded my sgs4g to ICS on CyanogenMod 9.1.0
forum.xda-developers.com/showthread.php?t=1730954
Click to expand...
Click to collapse
and enjoying the awesome rom the developers have come up with. battery backup seems to be pretty good.
However, I had to execute an additional step which was not there in the instructions i.e., after
step 5. Flash the ROM using CWM/TWRP
Click to expand...
Click to collapse
phone boots up to ClockworkMod Recovery (CWM) 6.0.1.2. Then I had to install cm-9-20130227-UNOFFICIAL-galaxys4gmtd.zip once again to finish the process. Hope I've not missed something here.
itzik2sh, I'll give a try to the latest aries 4.2.2 ROMs sometime later.
Regards,
Madhu
Related
Has anybody got a version of CWM that will work on the sgs4g? I accidentally flashed the galaxy s CWM from rom manager before finding this forum. Nothing has changed on the phone, except if i boot into CWM recovery i always get verification errors.
Also, are there any ROMs for the sgs4g that is running 2.3.6?
Thanks to anybody who can help.
Get rid of ROM Manager. I've read it doesn't work well on this phone. Check out http://forum.xda-developers.com/showthread.php?t=1380331 for a 2.3.6 ROM with the latest CWM/root/voodoo lagfix.
Sent from my SGH-T959V using XDA App
Don_Kronic said:
Has anybody got a version of CWM that will work on the sgs4g? I accidentally flashed the galaxy s CWM from rom manager before finding this forum. Nothing has changed on the phone, except if i boot into CWM recovery i always get verification errors.
Also, are there any ROMs for the sgs4g that is running 2.3.6?
Thanks to anybody who can help.
Click to expand...
Click to collapse
You should try this
http://forum.xda-developers.com/showthread.php?t=1422824
When it is time to choose a package pick the one that includes the beta 2d kernel from the Kj6 collection. Learning the one click method will also give you every thing you need should you make a mistake and need to recover from a soft brick
Sent from my SGH-T959V using XDA App
stephen_w said:
Get rid of ROM Manager. I've read it doesn't work well on this phone. Check out http://forum.xda-developers.com/showthread.php?t=1380331 for a 2.3.6 ROM with the latest CWM/root/voodoo lagfix.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
That is a link to a cwm flashable kernel.
Without cwm he will have no luck installing it.
Sent from my SGH-T959V using XDA App
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Bassmanjames said:
That is a link to a cwm flashable kernel.
Without cwm he will have no luck installing it.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
It's Heimdall installable, too, which is how I did it. I'm trying to leverage Heimdall more these days in an attempt to learn it better.
Sent from my SGH-T959V using XDA App
stephen_w said:
It's Heimdall installable, too, which is how I did it. I'm trying to leverage Heimdall more these days in an attempt to learn it better.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Noob moment
Yeah extract the zip and flash the zimage. I always forget about that...
Sent from my SGH-T959V using XDA App
This may just be a noob question and I hope I'm posting in the right place. I'm running 2.3.6 as well and want to flash Valhalla Final onto my device. The instructions say you must have pre-installed kernel with clockwork recovery. Do I need to use Heimdall and load a kernel with clockwork recovery or is there another way to get the CWM? I am still learning the basics of all this stuff. Forgive my ignorance.
ShadyAce80 said:
This may just be a noob question and I hope I'm posting in the right place. I'm running 2.3.6 as well and want to flash Valhalla Final onto my device. The instructions say you must have pre-installed kernel with clockwork recovery. Do I need to use Heimdall and load a kernel with clockwork recovery or is there another way to get the CWM? I am still learning the basics of all this stuff. Forgive my ignorance.
Click to expand...
Click to collapse
Since you're already on GB (2.3.6) you can do this, if you're not rooted follow:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G#Rooting
Once you're rooted:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G#Flashing_a_Kernel
FBis251 said:
Since you're already on GB (2.3.6) you can do this, if you're not rooted follow:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G#Rooting
Once you're rooted:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G#Flashing_a_Kernel
Click to expand...
Click to collapse
Worked perfectly. was able to finally start flashing ROMs. Thank you.
ShadyAce80 said:
Worked perfectly. was able to finally start flashing ROMs. Thank you.
Click to expand...
Click to collapse
Save the wiki to your bookmarks. We're updating it constantly so you'll always get the most up to date info from there. Also spread the word when other users need help, point them to the proper section in the wiki .
Thanks to everyone for their insight. My sgs4g is no more now. Luckily, I learned a lot about flashing with it before it died. Including unbricking. Still haven't gotten heimdall to work. But I think I have been trying to run the regular exe instead of the front end. We'll see. Hopefully I get paid this week to cut on the internet again. Killing me here.
Sent from my SGH-T679 using xda premium
Just got a Samsung from a fiend. How do I know which model I have?
SGH-T959V
Froyo 2.2.1
Thanks
Sent from my HTC Sensation 4G using Tapatalk 2
You can check it also by removing the battery, the info is at the back of the phone or go to settings> about phone> model number. once you've established, you are good to go..
and check this also.. http://forum.xda-developers.com/showthread.php?t=1470716 it may help you a lot..
epsix said:
SGH-T959V
Click to expand...
Click to collapse
If that's correct you're in the right forum!
Check out the link that warren sent to you so that you can get the phone onto Gingerbread bootloaders, which you'll need to flash any Gingerbread and more recent ROM (GB, ICS, JB). Make sure you also check out the wiki for a lot of our guides.
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V
Thanks guys, upgrade to GB 2.3.6 and rooted. Quick question Rom manager don't have cmw recovery for this phone, which recovery does this phone use and how do you boot into bootloader/recovery manually on Galaxy S 4G?
Sorry this is my first using Samsung phone.
Sent from my HTC Sensation 4G using Tapatalk 2
I think you should keep away from Rom manager as it is not compatible on our phone, here check this out.. http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V/Flashing_a_kernel .flash the gingerbread kernel and you are good.. and this also it may help you with some trouble ahead... http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V .once you have custom kernel you can check some custom GB roms and ICS. head over to development section and you
can choose what you think it's best..
epsix said:
Thanks guys, upgrade to GB 2.3.6 and rooted. Quick question Rom manager don't have cmw recovery for this phone, which recovery does this phone use and how do you boot into bootloader/recovery manually on Galaxy S 4G?
Click to expand...
Click to collapse
Depending on the kernel the recovery will either be CWM or TWRP. The easiest way to reboot recovery, if your on a ROM that doesn't support it from the power menu, is to download Quickboot from market. The other way is to power phone down then hold both volume rockers then press and holder power. Once the splash screen changes or gets brighter let go of power only. Either way works. For your own good delete the ROM manager app now.
Warrenforfree said:
I think you should keep away from Rom manager as it is not compatible on our phone, here check this out.. http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V/Flashing_a_kernel .flash the gingerbread kernel and you are good.. and this also it may help you with some trouble ahead... http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V .once you have custom kernel you can check some custom GB roms and ICS. head over to development section and you
can choose what you think it's best..
Click to expand...
Click to collapse
Ahhh...ok gotcha... i just flash the kernel now i can access cwm recovery, backing up my stock rom right now. Then flash away
Thanks warren.
epsix said:
... backing up my stock rom right now.
Click to expand...
Click to collapse
An extra bit of helpful information - if you decide you want to restore your back up that you made, do from from the kernel/recovery you made the back up with.
You can always use the one click back to stock in lumins sig if u fork it up
Sent from my SGH-T959V using xda app-developers app
i want to root my galaxy tab 2 with customized rom. can you guys plz help me.and tell me the process from the beginning coz im new to android...don't have much experience with it..my device is running android 4.1.2
drago989 said:
i want to root my galaxy tab 2 with customized rom. can you guys plz help me.and tell me the process from the beginning coz im new to android...don't have much experience with it..my device is running android 4.1.2
Click to expand...
Click to collapse
I would start reading some posts in the development forum, and other specific topics on the various steps you will need to take. But...
First you will need to install a custom recovery, like clockwork mod(cwm) or twrp.
Second, you will need to find a ROM specific to your device, making sure to check your model number and only installing a ROM if it is intended for your devices model.
Third, flash the rom .zip in the previously installed recovery.
That's really all you need to do, but you should read how to take those steps in the threads for them and your device.
Sent from my GT-P3110 using xda app-developers app
http://www.youtube.com/watch?v=pAvze-VNzj8
follow this for rooting. Then follow the instructions in the rom thread to flash a rom. if you need help pm me.
bluecarbon said:
I would start reading some posts in the development forum, and other specific topics on the various steps you will need to take. But...
First you will need to install a custom recovery, like clockwork mod(cwm) or twrp.
Second, you will need to find a ROM specific to your device, making sure to check your model number and only installing a ROM if it is intended for your devices model.
Third, flash the rom .zip in the previously installed recovery.
That's really all you need to do, but you should read how to take those steps in the threads for them and your device.
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Should i have to change my karnel also?
No
Sent from my GT-P3110 using xda app-developers app
drago989 said:
i want to root my galaxy tab 2 with customized rom. can you guys plz help me.and tell me the process from the beginning coz im new to android...don't have much experience with it..my device is running android 4.1.2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1722745
can i go back to my stock rom, karnel and recovery? if so please give me those link.
drago989 said:
can i go back to my stock rom, karnel and recovery? if so please give me those link.
Click to expand...
Click to collapse
The link I provided you covers all that. Just read it 2 or 3 times and familiarise yourself with everything. :thumbup:
Sent from my GT-I9300 using xda premium
squ89r97 said:
The link I provided you covers all that. Just read it 2 or 3 times and familiarise yourself with everything. :thumbup:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
thankx buddy.. but im still not sure abt stock recovery...can i go back to stock recovery as well?
drago989 said:
thankx buddy.. but im still not sure abt stock recovery...can i go back to stock recovery as well?
Click to expand...
Click to collapse
When you flash a stock firmware either from that link or (recommended) sammobile.com, its called stock for a reason it turns the firmware, recovery and kernel back to....err.....stock
Sent from my GT-I9300 using xda premium
squ89r97 said:
When you flash a stock firmware either from that link or (recommended) sammobile.com, its called stock for a reason it turns the firmware, recovery and kernel back to....err.....stock
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thankx mate.... u really help me a lot...:good::laugh:
Just trying to be helpful here, here is a faster way to get from stock one-click to JB goodness.....
After you flash to stock with antonx kernel reboot into recovery and flash bhundvens blastoff kernel, reboot recovery, now you should be in blue 5.0.2.8....flash the newest cm9, it will reboot automatically into recovery for you to flash a second time, but don't, instead flash a JB Rom, (I flashed chaos from dao) once it rebooted into recovery...jellybean recovery, I flashed the Rom plus gapps. Rom booted just fine.
So.....save a little time from completely flashing the whole rom, waiting for it to boot and rebooting into recovery just to do it again till you get where you want.....cheers
hopefully it saves you some time
************************just like everyone else says "I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE"*****************
just one-click back and start over hee hee!!!!
If you're saying flashing a kernel with CWM 5.x and then flashing a JB ROM is faster, we all know that already.
You are not flashing the kernel first technically. What you are doing is converting the file system.
However I thought all the JB roms had the mtd conversion script included. If they dont I would ask the person that ported them to update it with that script. There should never be a reason to flash to ics then jb.
AnAznBoy9724 said:
If you're saying flashing a kernel with CWM 5.x and then flashing a JB ROM is faster, we all know that already.
Click to expand...
Click to collapse
Not everyone knows that... If they did there wouldn't be people asking how to flash or how to get back to stock or to root....
Sent from my SGH-T959V using xda app-developers app
ArmyofTracy said:
Not everyone knows that... If they did there wouldn't be people asking how to flash or how to get back to stock or to root....
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Getting back to stock and rooting are totally different subjects and shouldn't be asked in ROM threads anyways. Flashing the ROM are always in the OP.
I understand..... Thanks. You sure learned a lot since these posts....
What does aries mean? June 18
Where is the fast charge option June 2......
Sent from my SGH-T959V using xda app-developers app
limeaide said:
You are not flashing the kernel first technically. What you are doing is converting the file system.
However I thought all the JB roms had the mtd conversion script included. If they dont I would ask the person that ported them to update it with that script. There should never be a reason to flash to ics then jb.
Click to expand...
Click to collapse
If you go back to our early JB ROMs
It was said to flash cm 9 or be on
a ICS ROM first if coming from GB.
Its said to be different now...
I still don't trust it..out of habit and
because it has always worked..
If I one-click back to stock I always
flash cm9 first then flash JB.
Sent from my SGH-T959V using xda premium
ArmyofTracy said:
I understand..... Thanks. You sure learned a lot since these posts....
What does aries mean? June 18
Where is the fast charge option June 2......
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
So now you're saying I can't make threads with questions I have? Okay... Can we get a mod to clean this thread up please?
AnAznBoy9724 said:
So now you're saying I can't make threads with questions I have? Okay... Can we get a mod to clean this thread up please?
Click to expand...
Click to collapse
Why do we need a mod
to clean up this thread...
Because you made a Remark
and he called you out.
He said thank you...
Relax its all good...
Sent from my SGH-T959V using xda premium
It's a useless arguement no one needs to see.
:banghead:
ArmyofTracy said:
:banghead:
Click to expand...
Click to collapse
\m/
Hi. I thank you in advance for pointers and direction. I have searched around, but want to make sure I am doing the right thing.
I have an Infuse and it is unlocked. It is running with a T-Mobile SIM card.
I downloaded Odin 3 v1.7. I successfully flashed from 2.2.1 (Froyo) to 2.3.6 Gingerbread by using this ROM/Root that I found on another thread here:
************ OPTION C *************
I997UCLB3-CWM-root-deodex-extras.rar
Features in this version
- Entropy's Daily Driver kernel
- Red CWM recovery
- Rooted
- Deodexed
- Zipaligned
- Busybox
- AT&T and other bloatware removed
- Scrolling wallpaper fix
- CRT off animation
- 8 lock screens
- Extended power menu
- Accurate battery mod
The phone is working properly on the new firmware.
I would like to jump up one more firmware to Ice Cream Sandwich or Jelly Bean. Every method I can find seems to include root, and I am already rooted. That happened when I ran "option C" from above.
What is my next step? Can I simply flash a Gingerbread ROM through Odin (after, of course, putting the Infuse in "download" mode)?
You need to flash a (ics) rom from the CWM RECOVERY of the phone not using odin and then you can flash a jellybean 4.xx rom.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Cool. Thank you! I am not sure how to do either of those things. At least now I have some research to do.
alexischino said:
You need to flash a (ics) rom from the CWM RECOVERY of the phone not using odin and then you can flash a jellybean 4.xx rom.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The cm10.2 Dev section has really good instructions start after the sgs kernal flasher step. And remember to enter cwm recovery hold down vol up and down while powering on.
Sent from my XT907 using xda app-developers app
Thanks guys! I will play more tonight. Gingerbread is a huge step up from what it was on, but I might as well keep going!
mrkhigh said:
The cm10.2 Dev section has really good instructions start after the sgs kernal flasher step. And remember to enter cwm recovery hold down vol up and down while powering on.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
My wife finally allowed me to upgrade her phone.. So I've recently just tried out these steps it's amazing to me that jelly bean 4.2.2 cm10.1 runs better than stock gingerbread. Only down side is no mhl.
Sent from my XT907 using xda app-developers app
Ok, I did a little research and I am more clear on the process - (download rom, put it on sd card, flash it using Clockword Mod while in recovery mode). I do have a question. Does it matter what version of CWM that is on my phone?
alexischino said:
You need to flash a (ics) rom from the CWM RECOVERY of the phone not using odin and then you can flash a jellybean 4.xx rom.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
When I flashed cwm it was red recovery, which is what you stated you had in the first post by choosing option c
You'll have to flash ICS before flashing jelly Bean when you flash ICS it'll change the cwm to a more current one.
Sent from my XT907 using xda app-developers app
That makes sense. Thank you!
mrkhigh said:
When I flashed cwm it was red recovery, which is what you stated you had in the first post by choosing option c
You'll have to flash ICS before flashing jelly Bean when you flash ICS it'll change the cwm to a more current one.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
one last check ...
Let me check one last time before I do something stupid:
I have a rooted and unlocked (T-mobile service) Infuse. I had stock Froyo 2.2.1. I used Option C from a thread here that rooted it and gave me RED recovery. I used Odin and flashed the "extras" package.
I currently have build #: Gingerbread.UCLB3, kernal version: 2.6.25.7-I997ruxkg3-cl366622, firmware 2.3.6.
I would like to experiment with flashing up to ICS, maybe Jelly Bean.
My understanding is that I can simply drop a ICS rom onto my SD card and flash it from red recovery. Then I do do the same process to move to Jelly Bean.
Am I correct? Am I missing anything? Thank you ALL soooo much for guidance. I am learning and will pass it on!
beezerhale said:
Let me check one last time before I do something stupid:
I have a rooted and unlocked (T-mobile service) Infuse. I had stock Froyo 2.2.1. I used Option C from a thread here that rooted it and gave me RED recovery. I used Odin and flashed the "extras" package.
I currently have build #: Gingerbread.UCLB3, kernal version: 2.6.25.7-I997ruxkg3-cl366622, firmware 2.3.6.
I would like to experiment with flashing up to ICS, maybe Jelly Bean.
My understanding is that I can simply drop a ICS rom onto my SD card and flash it from red recovery. Then I do do the same process to move to Jelly Bean.
Am I correct? Am I missing anything? Thank you ALL soooo much for guidance. I am learning and will pass it on!
Click to expand...
Click to collapse
Yes that is how you should do it, here is a video to help you in the process https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
Thanks! I think I am clear enough to not screw it all up now. I will try this tonight and report back!
alexischino said:
Yes that is how you should do it, here is a video to help you in the process https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Its really hard to screw things with this phone specialy.....
Yeah.....its typed on Note 3.
Ok, I followed the directions provided and flashed Infinitum ICS. All works well with the rom. Recovery is distorted. I see directions which include Heimdall to correct the recovery.
Does that process just correct the recovery or does it revert me back to something other than Infinitum Rom? if so, can I repeat the process to get the rom back?
My next step will them be to move to jelly bean and be happily ever after.
alexischino said:
Yes that is how you should do it, here is a video to help you in the process https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
beezerhale said:
Ok, I followed the directions provided and flashed Infinitum ICS. All works well with the rom. Recovery is distorted. I see directions which include Heimdall to correct the recovery.
Does that process just correct the recovery or does it revert me back to something other than Infinitum Rom? if so, can I repeat the process to get the rom back?
My next step will them be to move to jelly bean and be happily ever after.
Click to expand...
Click to collapse
When you update your phone you don't flash the gingerbread bootloaders right, you only need to flash the gingerbread bootloaders and that will fix the problem.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Ok, I blew it. Flashed back to Gingerbread.UCLB3, firmware 2.3.6 with Heimdall. Recovery is still totally distorted/unreadable.
Next move? I assume I should flash a Gingerbread bootloader. Where would I find the right one? I don't want to screw this up. Then I can move to ICS and then JB with no issues, right?
I 100% appreciate your help and I SWEAR I will pass along what I am learning to a newbie as soon as I get a chance!
alexischino said:
When you update your phone you don't flash the gingerbread bootloaders right, you only need to flash the gingerbread bootloaders and that will fix the problem.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
beezerhale said:
Ok, I blew it. Flashed back to Gingerbread.UCLB3, firmware 2.3.6 with Heimdall. Recovery is still totally distorted/unreadable.
Next move? I assume I should flash a Gingerbread bootloader. Where would I find the right one? I don't want to screw this up. Then I can move to ICS and then JB with no issues, right?
I 100% appreciate your help and I SWEAR I will pass along what I am learning to a newbie as soon as I get a chance!
Click to expand...
Click to collapse
Here you will find the gingerbread bootloaders http://forum.xda-developers.com/showthread.php?t=1613523 this is for (odin) scroll down until you see this
Sent from my SGH-I997 using XDA Premium 4 mobile app
Hey! It looks like I corrected the issue before you messaged back. I ran Heimdall again. Thought I had blown it. Screen went all speckled red yellow and blue on me. It was kinda pretty. I booted in download mode and it was speckled, too. I followed the steps to download mode even thought I could not see the screen. I flashed through Heimdall again, it ran properly, and then booted into download mode and ran with "bootloaders" checked. It seems all is well. Recovery mode is working (no distortion) and is blue (Android system recovery 3e).
Can I follow the steps I took to go to ICS and then JB (if I decide to go to JB) now with no other issues?
Dude, I really appreciate your guidance.
alexischino said:
Here you will find the gingerbread bootloaders http://forum.xda-developers.com/showthread.php?t=1613523 this is for (odin) scroll down until you see this
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
beezerhale said:
Hey! It looks like I corrected the issue before you messaged back. I ran Heimdall again. Thought I had blown it. Screen went all speckled red yellow and blue on me. It was kinda pretty. I booted in download mode and it was speckled, too. I followed the steps to download mode even thought I could not see the screen. I flashed through Heimdall again, it ran properly, and then booted into download mode and ran with "bootloaders" checked. It seems all is well. Recovery mode is working (no distortion) and is blue (Android system recovery 3e).
Can I follow the steps I took to go to ICS and then JB (if I decide to go to JB) now with no other issues?
Dude, I really appreciate your guidance.
Click to expand...
Click to collapse
Ok but remember if you now have the (android system recovery 3e) you need to obtain the (CWM recovery) again to be able to flash custom roms on your device, flash the UCLB3 gingerbread 2.3.6 rooted with CWM.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Will do. I'll report back. I have a feeling I barely escaped making my phone a really cool looking paperweight.
alexischino said:
Ok but remember if you now have the (android system recovery 3e) you need to obtain the (CWM recovery) again to be able to flash custom roms on your device, flash the UCLB3 gingerbread 2.3.6 rooted with CWM.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse