Related
Hi Guys,
My nexus s this morning was on nexus splash screen when i woke up, i remove the battery and tried to turn it on but it stock on google logo all along up to this time.
I had able to flash and restore it successfully with nandroid/rom with no errors, but still when i reboot it stock on google logo..
I had everything in place my phone is rooted with cwm recovery.
emorej said:
Hi Guys,
My nexus s this morning was on nexus splash screen when i woke up, i remove the battery and tried to turn it on but it stock on google logo all along up to this time.
I had able to flash and restore it successfully with nandroid/rom with no errors, but still when i reboot it stock on google logo..
I had everything in place my phone is rooted with cwm recovery.
Click to expand...
Click to collapse
I think you must flash stock rom.What model you have?i9020 or i9023 and what cwm version?
afilopou said:
I think you must flash stock rom.What model you have?i9020 or i9023 and what cwm version?
Click to expand...
Click to collapse
it has grh78 the super amoled one i think i9020.cwm v3.0.0.5..i already reflashed to stock rom but when i reboot it still stays on google logo..
emorej said:
it has grh78 the super amoled one i think i9020.cwm v3.0.0.5..i already reflashed to stock rom but when i reboot it still stays on google logo..
Click to expand...
Click to collapse
You flashed through Odin the bootloader,pda,modem and csc?
afilopou said:
You flashed through Odin the bootloader,pda,modem and csc?
Click to expand...
Click to collapse
no i did not use odin.. i used cwm only
emorej said:
no i did not use odin.. i used cwm only
Click to expand...
Click to collapse
Go here http://www.samfirmware.com/apps/auth/login?why=pw&try=1&wp=1&next=WEBPROTECT-i9020.htm
if you dont have acct just register.Download the proper firmware ( you will find Odin and a pdf with instructions as well).Make sure you installed samsung drivers on your pc, and in order to be in download mode power off your phone hold it between volume up and volume down (in the middle) and at the same time connect it through usb to your pc (on phone screen you ll see a yellow triangle with an android digging
afilopou said:
Go here http://www.samfirmware.com/apps/auth/login?why=pw&try=1&wp=1&next=WEBPROTECT-i9020.htm
if you dont have acct just register.Download the proper firmware ( you will find Odin and a pdf with instructions as well).Make sure you installed samsung drivers on your pc, and in order to be in download mode power off your phone hold it between volume up and volume down (in the middle) and at the same time connect it through usb to your pc (on phone screen you ll see a yellow triangle with an android digging
Click to expand...
Click to collapse
Thanks. which are the samsung drivers, are those installed when i used android sdk?
emorej said:
Thanks. which are the samsung drivers, are those installed when i used android sdk?
Click to expand...
Click to collapse
nope, this is the driver for ggogle android not for samsung nexus s.download from here http://forum.xda-developers.com/showthread.php?t=728929
afilopou said:
nope, this is the driver for ggogle android not for samsung nexus s.download from here http://forum.xda-developers.com/showthread.php?t=728929
Click to expand...
Click to collapse
i think i have those drivers already..anyway the link that you gave me does not work. i have a question, when i try to install stock 2.3.3 rom im getting installation aborted error, do you know how to buypass that?
afilopou said:
nope, this is the driver for ggogle android not for samsung nexus s.download from here http://forum.xda-developers.com/showthread.php?t=728929
Click to expand...
Click to collapse
Where can i get or what is the password when extracting the downloaded rar file?
emorej said:
i think i have those drivers already..anyway the link that you gave me does not work. i have a question, when i try to install stock 2.3.3 rom im getting installation aborted error, do you know how to buypass that?
Click to expand...
Click to collapse
maybe xda down?
here the original
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
Does Odin recognize your phone?what version of windows you have?
emorej said:
Where can i get or what is the password when extracting the downloaded rar file?
Click to expand...
Click to collapse
Firmware
http://hotfile.com/dl/107982455/033fcd6/I9020XXJK1.rar.html
password samfirmware.com
Odin http://hotfile.com/dl/107607762/640950b/I9003_Odin3_v1.82.rar.html
pdf http://www.samfirmware.com/I9023 Flasghuide English.pdf
afilopou said:
maybe xda down?
here the original
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
Does Odin recognize your phone?what version of windows you have?
Click to expand...
Click to collapse
i manage to get into downloading state. can you give me step by step process because on the pdf file its not accurate..thanks!
emorej said:
i manage to get into downloading state. can you give me step by step process because on the pdf file its not accurate..thanks!
Click to expand...
Click to collapse
when i got to downloading state the one withe "digging", the usb succesfully installed, but i forgot to extract odin so i cancelled it. i repeated the process and when i run odin it did not detect the phone..one more thing on which step will i used the I9020XXXJK1.rar which i extracted with password..
emorej said:
when i got to downloading state the one withe "digging", the usb succesfully installed, but i forgot to extract odin so i cancelled it. i repeated the process and when i run odin it did not detect the phone..one more thing on which step will i used the I9020XXXJK1.rar which i extracted with password..
Click to expand...
Click to collapse
Ok lets go.
First thing first you must make your pc recognized as samsung nexus s.If you are in download mode, pull the battery.go to bootloader (vol up+power), connect your phone to your pc and go to your device manager.what are you getting there?
afilopou said:
Ok lets go.
First thing first you must make your pc recognized as samsung nexus s.If you are in download mode, pull the battery.go to bootloader (vol up+power), connect your phone to your pc and go to your device manager.what are you getting there?
Click to expand...
Click to collapse
Hi i manage to flash it and it PASS! but why its still in google logo screen, shall i reboot it?
emorej said:
Hi i manage to flash it and it PASS! but why its still in google logo screen, shall i reboot it?
Click to expand...
Click to collapse
you put on odin the Bootloader,pda,phone and csc files?
afilopou said:
you put on odin the Bootloader,pda,phone and csc files?
Click to expand...
Click to collapse
yes i did put everything, i downloaded the phone modem separately coz its not included on the link that you gave to me..
emorej said:
yes i did put everything, i downloaded the phone modem separately coz its not included on the link that you gave to me..
Click to expand...
Click to collapse
try this
http://hotfile.com/dl/107916083/9cd3ccd/I9020XXJK1-_GRH78.rar.html
check on your device manager that the phone is recognized from your pc as nexus s
if you cant fix, you have 1 year factory warranty from Samsung.
my phone got ****t too ! ( every morning phone in charge, lights ON, black screen,and little wight point in middle of screen....when i remove battery and put it back it's help, but phone everyday start do increasingly same thing....)
I send to samsung repair center, they said it's gonna take around 7 business day ....the phone still there.)
My phone is unrooted, has the stock recovery and won't boot (stuck on the HTC screen). When I enter in Recovery, a red triangle with an exclamation mark appears.
Is it possible to S-Off the HTC Sensation 4G without booting into the phone? At this point I'm stumped and want to s-off to install CWM and flash a firnware and rom.
ungraph said:
My phone is unrooted, has the stock recovery and won't boot (stuck on the HTC screen). When I enter in Recovery, a red triangle with an exclamation mark appears.
Is it possible to S-Off the HTC Sensation 4G without booting into the phone? At this point I'm stumped and want to s-off to install CWM and flash a firnware and rom.
Click to expand...
Click to collapse
Oh right, I think you need to be able to have a working OS first...
My suggestion would be to download the tmous 3.32.x RUU (uploaded either by Football or Steve0007 - search the dev thread for it) then put phone into hboot and run the RUU exe from a windows pc.
This should hopefully fix it. If you get any RUU errors post the error code here
Jonny said:
Oh right, I think you need to be able to have a working OS first...
My suggestion would be to download the tmous 3.32.x RUU (uploaded either by Football or Steve0007 - search the dev thread for it) then put phone into hboot and run the RUU exe from a windows pc.
This should hopefully fix it. If you get any RUU errors post the error code here
Click to expand...
Click to collapse
Thanks! Currently download "RUU_PYRAMID_ICS_TMOUS_3.32.531.zip" uploaded by Steve0007. Will post results after I run it.
Well, I got an ERROR [170] USE CONNECTION ERROR.
The cable is well connected, even hboot says it's in Fastboot USB.
Installed Naked Drivers, currently updating....
ungraph said:
Thanks! Currently download "RUU_PYRAMID_ICS_TMOUS_3.32.531.zip" uploaded by Steve0007. Will post results after I run it.
Well, I got an ERROR [170] USE CONNECTION ERROR.
The cable is well connected, even hboot says it's in Fastboot USB.
Installed Naked Drivers, currently updating....
Click to expand...
Click to collapse
You may need the htc sync and official htc drivers that come with the htc sync download as well
Jonny said:
You may need the htc sync and official htc drivers that come with the htc sync download as well
Click to expand...
Click to collapse
It worked!
Thanks for your help!
ungraph said:
It worked!
Thanks for your help!
Click to expand...
Click to collapse
No problem, glad you got a working phone again
Driver instalation
Hello,
i have the same problem with my htc sensation, but i don't know how to install drivers to get my htc sensation in windows (i've tried various drivers).
My hboot is locked and also get the red triangle when i try to factory reset the phone. When i run RUU_PYRAMID_ICS_TMOUS i also get the error like ungraph before. I have old XP Windows.
Can someone help with my problem?
Thanks.
akaandro said:
Hello,
i have the same problem with my htc sensation, but i don't know how to install drivers to get my htc sensation in windows (i've tried various drivers).
My hboot is locked and also get the red triangle when i try to factory reset the phone. When i run RUU_PYRAMID_ICS_TMOUS i also get the error like ungraph before. I have old XP Windows.
Can someone help with my problem?
Thanks.
Click to expand...
Click to collapse
did you try those drivers?
http://forum.xda-developers.com/showthread.php?t=2217396
I have used now this driver but i cannot get my HTC to be visible in Windows.
akaandro said:
I have used now this driver but i cannot get my HTC to be visible in Windows.
Click to expand...
Click to collapse
have you enabled usb debugging mode from settings?
No i didn't, where (windows or HTC) and what settings?
Can you help me to set this? thanks.
I cannot enter in HTC OS system if this needs to be done on HTC than i cannot..
When i turn on HTC i only get this white screen with HTC trade mark.
I can only enter HBOOT and when red triangle appears i can enter this other screen.
akaandro said:
No i didn't, where (windows or HTC) and what settings?
Can you help me to set this? thanks.
Click to expand...
Click to collapse
you will find it in the settings of your phone
i cannot enter the settings of my phone that is my main problem
akaandro said:
i cannot enter the settings of my phone that is my main problem
Click to expand...
Click to collapse
try to run the ruu manually from bootloader
but i don't know how?
akaandro said:
but i don't know how?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1672425
step 4
thanks, i'll try this in next few days and let you know the results.
rzr86 said:
http://forum.xda-developers.com/showthread.php?t=1672425
step 4
Click to expand...
Click to collapse
i get an error ERROR [171] USB CONNECTION ERROR when i start RUU, can you help with this error?
akaandro said:
i get an error ERROR [171] USB CONNECTION ERROR when i start RUU, can you help with this error?
Click to expand...
Click to collapse
did you choose fastboot from bootloader?
rzr86 said:
did you choose fastboot from bootloader?
Click to expand...
Click to collapse
i have entered HBOOT and than choose fastboot usb.
Would somebody be able to help?
My phone has been playing up a lot lately. I was running MIUI.
Also the volume buttons do not work on the phone.
At the moment i have a phone which is stuck on the MIUI boot screen(just the yellow "MI" symbol)
I would like to get my phone back to stock, i have read so far that i will have to use an RUU (not sure if this is suitable or not for my situation?)
There are a few problems i have with this.
I have no idea of knowing what CID i am running, and no idea how to find it with my phone in its current state.
When i do look on the links to RUU pages i am unable to find one that is suitable for Orange (EE??) UK
[*[I have no experience of ADB, and if i need to use that i will need a complete NOOBS guide to how to use it.
Any help would be appreciated, even links to other pages etc.
Many thanks in advance for your help
Matt
mattsd said:
Would somebody be able to help?
My phone has been playing up a lot lately. I was running MIUI.
Also the volume buttons do not work on the phone.
At the moment i have a phone which is stuck on the MIUI boot screen(just the yellow "MI" symbol)
I would like to get my phone back to stock, i have read so far that i will have to use an RUU (not sure if this is suitable or not for my situation?)
There are a few problems i have with this.
I have no idea of knowing what CID i am running, and no idea how to find it with my phone in its current state.
When i do look on the links to RUU pages i am unable to find one that is suitable for Orange (EE??) UK
[*[I have no experience of ADB, and if i need to use that i will need a complete NOOBS guide to how to use it.
Any help would be appreciated, even links to other pages etc.
Many thanks in advance for your help
Matt
Click to expand...
Click to collapse
Hi,
Look HERE
Look in the list of RUU's for a Europe one that is close or higher than your phone.
malybru said:
Hi,
Look HERE
Look in the list of RUU's for a Europe one that is close or higher than your phone.
Click to expand...
Click to collapse
Thankyou soo much for the response.
When you say close to or higher than what on my phone what do you mean?
Then i am assuming it will work if the phone is stuck on the boot screen?
Many Thanks
mattsd said:
Thankyou soo much for the response.
When you say close to or higher than what on my phone what do you mean?
Then i am assuming it will work if the phone is stuck on the boot screen?
Many Thanks
Click to expand...
Click to collapse
Hi,
The RUU runs from the PC.
All you need to do on the phone is to go to bootloader,then, fastboot, and plug in your USB cable and run the RUU.
Look at the thread I gave you.
2.3 To find your software version:
malybru said:
Hi,
The RUU runs from the PC.
All you need to do on the phone is to go to bootloader,then, fastboot, and plug in your USB cable and run the RUU.
Look at the thread I gave you.
2.3 To find your software version:
Click to expand...
Click to collapse
Ok and how do i go to the boot loader with no functioning volume buttons?
Thanks
mattsd said:
Ok and how do i go to the boot loader with no functioning volume buttons?
Thanks
Click to expand...
Click to collapse
do this
switch on your device normally
probably it will stuck in the yellow miui
then connect it to pc via usb
from pc go to the folder where you have adb and fastboot files
open a command window in that folder and do
adb reboot bootloader
rzr86 said:
do this
switch on your device normally
probably it will stuck in the yellow miui
then connect it to pc via usb
from pc go to the folder where you have adb and fastboot files
open a command window in that folder and do
adb reboot bootloader
Click to expand...
Click to collapse
LEGEND!!
Thanks
mattsd said:
LEGEND!!
Thanks
Click to expand...
Click to collapse
no problem mate
rzr86 said:
no problem mate
Click to expand...
Click to collapse
When i got home and tried this i have no joy.
I get: "error: device not found"
I checked device manager to see if there was an android device that i have no drivers installed but everything is normal.
Any Ideas?
Many Thanks
mattsd said:
When i got home and tried this i have no joy.
I get: "error: device not found"
I checked device manager to see if there was an android device that i have no drivers installed but everything is normal.
Any Ideas?
Many Thanks
Click to expand...
Click to collapse
Hi,
Check my signature.
#27
Make sure you are not using usb 3.0 slots or hubs.
Try slots at the front and back.
Use good cables.
I have very bad problem with my phone. I wanted to install the cm 11 and its gapps, the cm I was able to install the gapps but it gave me the error status7. I read that to solve this problem I had to update the CWM. I installed from the recovery 6.0.0.4, and since recovery from I told him to do the reboot, you aren't more turned on. I have a phone that will not turn on and I can not do anything. Is there a way to completely reset the phone using only the pc from 0? Sorry for my bad english, i'm italian.
Ragnarox97 said:
I have very bad problem with my phone. I wanted to install the cm 11 and its gapps, the cm I was able to install the gapps but it gave me the error status7. I read that to solve this problem I had to update the CWM. I installed from the recovery 6.0.0.4, and since recovery from I told him to do the reboot, you aren't more turned on. I have a phone that will not turn on and I can not do anything. Is there a way to completely reset the phone using only the pc from 0? Sorry for my bad english, i'm italian.
Click to expand...
Click to collapse
p.s. i've also a nandroid backup if it be to help
Ragnarox97 said:
p.s. i've also a nandroid backup if it be to help
Click to expand...
Click to collapse
do you have access to the bootloader?
rzr86 said:
do you have access to the bootloader?
Click to expand...
Click to collapse
no, I have tried every combination of buttons, but will not start in any way
Ragnarox97 said:
no, I have tried every combination of buttons, but will not start in any way
Click to expand...
Click to collapse
how did you try to update the recovery?
if you switch on the device normally what does it show you?
Ragnarox97 said:
no, I have tried every combination of buttons, but will not start in any way
Click to expand...
Click to collapse
Have you tried accessing bootloader like this? Take out battery, sim card and memory card and then put battery only in, plug in usb 2 to computer and the micro usb to phone and then you should see the orange light come on and this will indicate that the phone is connected then open adb through android sdk and type adb reboot bootloader and tell me if it works
rzr86 said:
how did you try to update the recovery?
if you switch on the device normally what does it show you?
Click to expand...
Click to collapse
I've updated the recovery, by simply downloading the package. Zip from SD card and installing it from recovery. If I press the power button nothing happens, the screen remains black and does not even have a little light.
NextGenGTR said:
Have you tried accessing bootloader like this? Take out battery, sim card and memory card and then put battery only in, plug in usb 2 to computer and the micro usb to phone and then you should see the orange light come on and this will indicate that the phone is connected then open adb through android sdk and type adb reboot bootloader and tell me if it works
Click to expand...
Click to collapse
I tried as you said yourself, but when it is charging (or attached to the PC, or to a plug) the orange LED is not lit. Is not lit, the only answer I got was that the computer told me "driver installation failed".
Ragnarox97 said:
I've updated the recovery, by simply downloading the package. Zip from SD card and installing it from recovery. If I press the power button nothing happens, the screen remains black and does not even have a little light.
I tried as you said yourself, but when it is charging (or attached to the PC, or to a plug) the orange LED is not lit. Is not lit, the only answer I got was that the computer told me "driver installation failed".
Click to expand...
Click to collapse
Cwm itself has problems with the htc sensation, why did you not install Twrp? If you are able to access the recovery have you tried flashing Twrp from there, not sure if you can but have a search.
---------- Post added at 11:44 PM ---------- Previous post was at 11:40 PM ----------
Ragnarox97 said:
I've updated the recovery, by simply downloading the package. Zip from SD card and installing it from recovery. If I press the power button nothing happens, the screen remains black and does not even have a little light.
I tried as you said yourself, but when it is charging (or attached to the PC, or to a plug) the orange LED is not lit. Is not lit, the only answer I got was that the computer told me "driver installation failed".
Click to expand...
Click to collapse
Install the drivers from here, not sure (im trying my hardest) http://htc.vi8.info/
take a look here too
http://forum.xda-developers.com/showthread.php?t=1522351
NextGenGTR said:
Cwm itself has problems with the htc sensation, why did you not install Twrp? If you are able to access the recovery have you tried flashing Twrp from there, not sure if you can but have a search.
---------- Post added at 11:44 PM ---------- Previous post was at 11:40 PM ----------
Install the drivers from here, not sure (im trying my hardest) http://htc.vi8.info/
Click to expand...
Click to collapse
I can not get into recovery, it does not do anything. The screen does not turn on in any way, and in any way the charge attack, the little light does not turn orange.
From the link you gave me, I have to download and install these: hTCDriver-4.2.0.001.exe?
rzr86 said:
take a look here too
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
Thanks for the link, execute this procedure with a friend of mine who understands more.
According to you, my situation is a recoverable or unrecoverable brick?
Ragnarox97 said:
Thanks for the link, execute this procedure with a friend of mine who understands more.
According to you, my situation is a recoverable or unrecoverable brick?
Click to expand...
Click to collapse
if unbricking project fails then the only thing i can tell you is to go for jtag
this is the last option
i am out of ideas since your device it doesn't react anything at all
rzr86 said:
if unbricking project fails then the only thing i can tell you is to go for jtag
this is the last option
i am out of ideas since your device it doesn't react anything at all
Click to expand...
Click to collapse
I'm sorry, I can not understand well the first three prerequisites unbrick project:
1) I downloaded the live CD of Linux that put at the end and it is an ISO file. I have to mount with Daemon Tools? And as for the automount disabled and without unity, are parameters that I decide to install?
2) Packages for devices that are at the end are divided into 32-bit and 64-bit. Are the bits of my operating system or the phone (if they have)?
excuse my ignorance.
3) What is RUU and where do I find the right one for my device?
Ragnarox97 said:
I'm sorry, I can not understand well the first three prerequisites unbrick project:
1) I downloaded the live CD of Linux that put at the end and it is an ISO file. I have to mount with Daemon Tools? And as for the automount disabled and without unity, are parameters that I decide to install?
2) Packages for devices that are at the end are divided into 32-bit and 64-bit. Are the bits of my operating system or the phone (if they have)?
excuse my ignorance.
3) What is RUU and where do I find the right one for my device?
Click to expand...
Click to collapse
1)i don't know mate probably you have to extract the contents of it
it would be better to ask it in the unbrick thread
2)for the oerating system
3)ruu is the official rom and restores everything back to stock(including stock recovery)
see here
http://forum.xda-developers.com/showthread.php?t=1672425
rzr86 said:
1)i don't know mate probably you have to extract the contents of it
it would be better to ask it in the unbrick thread
2)for the oerating system
3)ruu is the official rom and restores everything back to stock(including stock recovery)
see here
http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
I found these: http://htc.vi8.info/Sensation-XE/ which take the first or the third (I live in Italy)?
Ragnarox97 said:
I found these: http://htc.vi8.info/Sensation-XE/ which take the first or the third (I live in Italy)?
Click to expand...
Click to collapse
the point is does it match with your cid and region?(same firmware or higher)
rzr86 said:
the point is does it match with your cid and region?(same firmware or higher)
Click to expand...
Click to collapse
I think because it corresponds with the region is Europe, the cid not know what is.
In the manual it says to download the latest RUU for my device, then the second ones I've found I should be the third, 2 October 2012. But if there were others on that page are not there?
There are so many, I do not know where to go get:
http://htc.vi8.info/Stock-RUU/
http://shipped-roms.com/index.php?category=android&model=Pyramid
http://www.persianhtc.net/index.php?dir=Sensation(Pyramid)/rom/original/EXE/
http://www.androidruu.com/index.php?developer=Pyramid
Ragnarox97 said:
I think because it corresponds with the region is Europe, the cid not know what is.
In the manual it says to download the latest RUU for my device, then the second ones I've found I should be the third, 2 October 2012. But if there were others on that page are not there?
There are so many, I do not know where to go get:
http://htc.vi8.info/Stock-RUU/
http://shipped-roms.com/index.php?category=android&model=Pyramid
http://www.persianhtc.net/index.php?dir=Sensation(Pyramid)/rom/original/EXE/
http://www.androidruu.com/index.php?developer=Pyramid
Click to expand...
Click to collapse
if your device is unbranded try the third one from here
http://htc.vi8.info/Sensation-XE/
rzr86 said:
if your device is unbranded try the third one from here
http://htc.vi8.info/Sensation-XE/
Click to expand...
Click to collapse
I downloaded it, and I wanted to ask, should not be a. Zip file? Instead it is a. Exe to install on my pc.
Ragnarox97 said:
I downloaded it, and I wanted to ask, should not be a. Zip file? Instead it is a. Exe to install on my pc.
Click to expand...
Click to collapse
yes you run the exe from pc
connect the device to pc in fastboot mode
edit: but you will be able to do that when you will gain access to the bootloader again
rzr86 said:
yes you run the exe from pc
connect the device to pc in fastboot mode
edit: but you will be able to do that when you will gain access to the bootloader again
Click to expand...
Click to collapse
There is a slight problem, the first command that I write on the terminal,. / Brickdetect.sh, I should recognize the device bricked. Instead it is not found. How so? When I attack my phone to pc, QHSUSB_DLOAD appears in the device list, but marks it as not specified.
Hi Guys,
I had installed Exodus 0607 build and less than a day into the ROM it went into bootloop..
as i was able to enter recovery, i reflashed the Current build that time was 0609, so again less than a day into it AGAIN.
The phone was at 3% when i switched it off as i could not get the OPO charger to charge the device, after that the phone was completely drained out.. i kept on charging with the OPO charger.. did not work, i pressed power 20 secs for 5 times did not work.
did not work the other method of:
switch off for 12 hours and recharge for 6 hours.. (both done approx)
but no help.
is there any work around on this?
im desperate to use the device..
this is the 3rd day almost..
please help!!
rhn345 said:
Hi Guys,
I had installed Exodus 0607 build and less than a day into the ROM it went into bootloop..
as i was able to enter recovery, i reflashed the Current build that time was 0609, so again less than a day into it AGAIN.
The phone was at 3% when i switched it off as i could not get the OPO charger to charge the device, after that the phone was completely drained out.. i kept on charging with the OPO charger.. did not work, i pressed power 20 secs for 5 times did not work.
did not work the other method of:
switch off for 12 hours and recharge for 6 hours.. (both done approx)
but no help.
is there any work around on this?
im desperate to use the device..
this is the 3rd day almost..
please help!!
Click to expand...
Click to collapse
Does it show up with you connect it to your PC?
nope, unknown device......
to be precise..
usb device not recognised
Heisenberg said:
Does it show up with you connect it to your PC?
Click to expand...
Click to collapse
usb device not recognised
rhn345 said:
usb device not recognised
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
You can now proceed to install unsigned drivers from the file you downloaded. Open Device Manager, you should be seeing ugly yellow warning under other devices for QHUSB_BULK. Right click on the name and select Update Driver Software > Browse my Computer for driver software. For driver software location provide the path where you have extracted Qualcomm 2012 drivers you downloaded and make sure 'Include Subfolders' is checked. Proceed through all the installation prompts ignoring any warnings.
Cant see QHUSB_BULK
over there..... will that be fine?
rhn345 said:
You can now proceed to install unsigned drivers from the file you downloaded. Open Device Manager, you should be seeing ugly yellow warning under other devices for QHUSB_BULK. Right click on the name and select Update Driver Software > Browse my Computer for driver software. For driver software location provide the path where you have extracted Qualcomm 2012 drivers you downloaded and make sure 'Include Subfolders' is checked. Proceed through all the installation prompts ignoring any warnings.
Can see QHUSB_BULK
over there..... will that be fine?
Click to expand...
Click to collapse
Can or can't see it?
Heisenberg said:
Can or can't see it?
Click to expand...
Click to collapse
Sorry i am too sleepy for this BS typos.. its 4 Am here...:/
CANT SEE IT ..
rhn345 said:
Sorry i am too sleepy for this BS typos.. its 4 Am here...:/
CANT SEE IT ..
Click to expand...
Click to collapse
Ok, it's probably best to ask for help from netbuzz in the unbrick thread.
Heisenberg said:
Ok, it's probably best to ask for help from netbuzz in the unbrick thread.
Click to expand...
Click to collapse
so i should not go along with the process for now?
rhn345 said:
so i should not go along with the process for now?
Click to expand...
Click to collapse
If it isn't doing what it's meant to, no, I'd ask for help first.
Heisenberg said:
If it isn't doing what it's meant to, no, I'd ask for help first.
Click to expand...
Click to collapse
hope he answers.. i posted there for help agn.
:'(
M still stuck.
No change
Phone isnt getting detected...
Sent from my MB865 using XDA Free mobile app