[Q] Help! Huawei U8800 Bootlooping on 2.3.5 Official Rom after many attempts to fix - General Questions and Answers

Hey guys, I Know this phone is old but please help me
I was using official 2.3.5 ROM and it was getting old so I thought to root and install an ICS Rom so i rooted and installed MIUi ICS ROM (http://forum.xda-developers.com/showthread.php?t=2029969) it was really nice and i thought to install Aurora Rom(http://forum.xda-developers.com/showthread.php?t=1492957) and it was Awsome! so i got into installing new ROMs and i was installing new ROMs almost every week and one day i saw CM 11 KitKat ROM for Huawei U8800 and I wanted to install it but before that i had to install Ble-Part Partition (http://forum.xda-developers.com/showthread.php?t=2615712) i flashed it succesfully and i installed the 2.2 version after that i flashed CWM 6.0.4.6 and i installed KitKat CM11 without any problems!
After some time using it for some time i thought to go back to Aurora as CM 11 was a little buggy and Aurora was the most stable ROM but as i was installing Aurora, i accidently formatted Boot instead of formatting System and without realizing it i flashe Aurora which flashed very quickly rather unexpectedely, and when i rebooted a blue screen appeared. I (surprised) installed official 2.3.5 ROM via dload and when it had installed the phone went into bootloop and i performed a factory data reset and it booted normally. But when i rebooted the phone again again it went to bootloop again. So i installed official 2.2 ROM and it installed succesfully and it never bootlooped in 2.2 ROM. But i wanted to install Aurora but it needs a .35 kernel and whenever i install 2.3.5 it keeps on bootlooping and i cant root it, though i can root 2.2 ROM easily and install .32 ROMs but they are quite old and I want to install ICS, JellyBean or KitKat Rom, which unfortunately i cant
Just in case you would be wondering i have tried many methods to go back to stock partition and none of them works and i have 1.8 GB storage! I have read that distorted partition can cause bootloops on 2.3.5 ROM so if anyone can help me to fix this problem, ill be very grateful as this is a very important phone to me!
And if you have any questions please ask!

Related

[Q] I need some answers about Nexus S

So I bought Nexus S from second hand recently mostly because it will get official ICS support from Google.
So because it's second hand buy, I really don't know if I'm using original bootloader, kernel, radio etc.
It's rooted (because I have Superuser app), I think it has stock 2.3.6 android (build number GRK39F) and kernel version 2.6.35.7-gf5f63ef, [email protected]#1.
Can someone who use stock android and original kernels confrime to me that this is right version?
I really want to update to ICS using incremental update which I found here (http://forum.xda-developers.com/showthread.php?t=1445635) but I'm affraid to don't screw something because of bad experience when I radio bricked my desire
Can I update it to ICS or I need to do unroot or something?
Just download the correct stock ICS rom for your device (if it is I9020T or I9023) ,put it on the SD root and then flash it using the stock or CWM recovery and be done with it (if you need the ICS)
most likely you won't be update by OTA because you are rooted (system file verification will fail)
just download stock ICS ROM and flash it ...
Ota will install fine if its a stock rom with just root. The update script basically checks that everything that should be there is there . If there is something else in there like su it don't matter.
flashing a new rom is the best way to go if you have cwm installed already
I succesfuly flashed ICS and first impressions are very good.
But I think I lost recovery...
jurvyx said:
I succesfuly flashed ICS and first impressions are very good.
But I think I lost recovery...
Click to expand...
Click to collapse
flash a CWM recovery via adb , or there is TWRP recovery in DEV section , which is very good .

[Q] Nexus s i 9023 2.3.3 status 7 and OTA 2.3.6 installerror

I was running nexus s 4.0.3 on my phone i downloaded the kernel to overclock my nexus s but the kernel was of nexus s gingerbread i suppose
So my phone hanged and didnt boot up ....at that time i forgot to make bacup of my current rom so i ve downloaded a older ics(not official pre realse one) i flashed with it and it started everything worket except wifi and the problem of status 7 has begun i couldnt fix it so i went to samsung guys and they installed the 2.3.3 on my phone ... and now the main problem start
My nexus s is not able to accept any kind of update say it as a system update of i9023 2.3.6 or custom rom with status 7 error . I googled it a lot they say its a problem with the signature it download a proper signed file still it doesn't help it installs but not working properly even after doing wipe cache , dalvik cache so i googled more it says make no changes in phone and return it with stock system apps i did it again same problem while system update (screen hangs with android exclamatiory sign in a triangle) i then downloaded a stock rom of 2.3.3 for nexus s i9023 while installing it with the clockworld mod recovery 5.0.2(latest as far as i know) it starts install then says status 7 error.
To overclock my phone i have installed netarchy kernel for overclocking to 1.4 ghz....is it because of my kernel changed i am not able to install andy custom rom or system ota update from google
And theres one more thing i have changed the bootloader version accidently thinking it may work to i9020xxka3 i think which is the same for i 9023 and my baseband version is i9020xxkb3.
I have tried to install many signed versions of rom for my phone including 2.3.3 ,2.3.6 and ics 4.0.3 all stock downloaded from different websites but still not able to install any rom through clockworld mod recovery and any of the system update .

[Q] Question about Neo V, miui and kernels

Hello everyone! This is my first post (i am a total newbie) and I wanted to ask about flashing miui in my already rooted SE Neo V. You see I followed the instructions on the unlockr website and how to root my phone which I succeeded in doing and then headed over here to try the new miui rom. Problem is that the phone got stuck at boot, I unbricked it after a little research and now have restored it back to a rooted version of vanilla ics. Anyway I was looking through the page of the miui rom (http://forum.xda-developers.com/showthread.php?t=1553585) and I noticed that it says something about the .587 kernel. I currently have kernel .562 flashed on my phone. Could that be why I got a bootloop and bricked my phone while trying to install miui or was the problem the fact that I didnt format the /system partition prior to the installing of the miui rom? If so, the link that is provided in the miui thread about the 587 kernel downloads a boot.img which i dont know how to flash. How could I do that? And is it really necessary?
Thanks in advance for all the help!

[Q] Custom ROMs won't boot

Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
muqy said:
Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
Click to expand...
Click to collapse
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
chairsz said:
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
Click to expand...
Click to collapse
Hey man, worked a charm thanks!
For users who may have the same problem:
After flashing 4.3 onto the device it did NOT boot.
- However I then went into the bootloader flashed custom recovery, I used cwm.
- Then I went into recovery, used adb to push the rom and gapps onto sdcard
- Full wipe and then installed rom. Then installed gapps
Working fine.
Cheers chairsz :good::good:

I'm not able to install stock rom in tab 2

Hey guys, recently i installed omni 4.4.4 rom through twrp 3.0.2.0 but somehow the rom is not working properly so i decided to revert it to stock through odin but the thing is that it is not reverting back although stock rom is successful getting flashed still the previous rom is not disappearing. Drop some help guys
ran_droid said:
Hey guys, recently i installed omni 4.4.4 rom through twrp 3.0.2.0 but somehow the rom is not working properly so i decided to revert it to stock through odin but the thing is that it is not reverting back although stock rom is successful getting flashed still the previous rom is not disappearing. Drop some help guys
Click to expand...
Click to collapse
Sounds like the emmc got write protected due to end of life bug.
Android andi has a write up about it on his github page.

Categories

Resources