I cracked my screen (while it was in the pocket of my jeans). Anyone know where I can find replacement screen? Is it easy to change it?
Thanks
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Philippe_Raimo said:
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Click to expand...
Click to collapse
Thank you very much, I will look into this one.
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Look for an original AUO H380VL01 or HTC Touch HD Sharp matrix... It's reported to be compatible with our phone
cracked screen too
baddentist said:
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Click to expand...
Click to collapse
i have the same thing with my acer screen (cracked in my jeans)
i buy one on ebay (i m waiting the screen)
can you tell me how to do to change the screen ? it's easy?
(sorry for my bad english)
ok it s done
i recieve my lcd screen with tools and i change it
it's easy
the screen is ok thanks for xda and all of you for existing
(sorry for my bad english)
I installed mine today -after 6 months with broken screen- I bought lcd for HTC Touch HD T8282.It is far more cheaper than the acer one and fits perfectly.ebay item 290424248491.
The HD screen is the same of NeoTouch?
I've paid 70€ for a screen for newTouch, but your proposition is more good: 50€!!
Are you sure it's good for Acer? My touchscreen is OK...
Im using it since last friday. its perfect
I received my screen today, but it's difficult to open this mobile phone!
I remove 5 screw on sur back of the phone, but i don't know what remove
There are two more screws at the left and right sides of battery house
littlbox said:
Im using it since last friday. its perfect
Click to expand...
Click to collapse
i have the same prob.... i dropped my phone and my screen blanked ....and i need another lcd .... i was thinking about what you did.... but if i'll get the HTC one the front of the mobile will be with HTC logo instead of the ACER one ...
right?
screen now fixed
I took my phone in to a local shop and they were able to change out the screen using an HTC HD screen (yes, the exact same screen as the neotouch). All is fine with the screen. They messed up the power button, but that is another story. I watched the guy do this and it seemed like a hell of a lot of intricate work to do yourself. I was happy to pay the $120. Now, I just need to return and get them to redo the power button (installed it incorrectly when putting it all back together).
For those adventurous enough- go for it, but I suggest the cheaper HD screen. And no, only the screen was replaced, which is under the touch screen/digitizer that actually has the acer logo. All looks as it did before.
I took my neotouch for a motocycleride in the rain. It didn't like it too much and now the touchfunction is messed up on parts of the screen. It all displays as it should but I can't use parts of the screen. I should be allright with just replacing the digitizer right? Ebay item Item number: 170518652337
Hi, the same for me.
Touch doesn't work on some area.
Need change digitizer or LCD?
Antenna gps
Hi someone tell me where it's possible to buy a part "gps antenna "?
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
darks1de said:
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
Click to expand...
Click to collapse
Hi,
this didn't work in my case. After replacing my broken original lcd screen with a new lcd display (eBay - No. 120608475783, Original HTC Touch HD LCD Display T8282), I can see that the display is switched on, but it doesn't seem to receive any signal (like you turn on your pc monitor but not the pc). Now I have two questions:
1.) If only the lcd display is broken - should I still see something on the display? Because on my broken display, I only have a black and a white part and some coloured stripes, mostly where the display is broken.
2.) Is it possible that there is something more broken on my NeoTouch or did I simply receive a broken lcd panel? It did fall off the couch, completely flat on the display.
fyi: the new lcd was missing some isolation (on the flexible part with some electrical components) which was present on my original lcd. I used some sticky tape as a replacement because it is directly positioned over some other electrical components on the phone when in place.
New Info:
Everything except from the display seems to be fine - when it is connected to my PC running "My Mobiler". But I have seen pictures of mobiles with a cracked screen whre you were still able to see (partly) the homescreen, etc. On mine, I am not able to see anything while the cracked screen is mounted - only white and black parts and some colored stripes...
Update: The delivered display was broken. Yesterday I received a new one which works perfectly!
many thanks in advance
TrashX
aih, the same story with my f1
anyway could you suggested seller lcd f1 on ebay???
i'm afraid if wrong order with lcd resolution under wvga,,,
some seller show resolution from their prodocut and a lot of seller don't do that,,
please help me..
Hello everyone I hope on answer.I bought Desire S a few days ago,and the phone is in excellent condition, with regard to aesthetics is now the problem is the display screen is Unscratched "working" at the top works but the touch screen reacts strangely like skips as if that part is dead, it means giving the opposing functions.I think Digitazer is changed as can be seen at the bottom of the screen to display the screen out of the case but not digitazer, bulging a little and there a little dust under digitazer, signs changed one hundred percent, now I'm interested in is not yet up to the digitazera or software, he now works on 2.3.5 sense 3.0,Sorry for bad English.
I'm having a strange problem with my Star G9300+, MTK6577.
There is a part of the screen, where the touch of 1 finger is recognized as 2 fingers, 5mm vertically distant one from the other.
I've tried with a multitouch tester APP, and it shows that this happens on the whole width of the screen, for a 5mm-height area, in the middle of the screen.
Any idea on what it can be, and how to solve it?
Thanks
Omar
got this problem on my first multitouch device, too. this is a faulty digitizer. buy a replacement one, this is the only way get it working.
do you know were i can find a touch replace
So I woke up today and my 4 day old Xperia Z3 was perfect. Then after being at work for two hours I checked my phone and there was a tiny single crack across the bottom right corner. I have never dropped the phone or anything so I have no idea how it could crack. Then I also noticed that the bottom half of the touch screen was completely unresponsive. And it still it. I cant pull up any of the apps on the bottom of my screen. Anyone know why this is happening?! One tiny crack shouldn't cause this! What can I do?
Looks like your device was bumped and broken even without notice, I'm afraid you'll have to replace a new touchscreen. Here are the DIY tutorial guide and part for your reference:
Guide: https://www.youtube.com/watch?v=levTY6Ixxl8
Replacement: http://www.etradesupply.com/sony-xperia-z3-digitizer-touch-screen.html
BTW, this is a sub-forum about Z3+, not Z3.
Hello, guys.
Recently, I dropped my M2 on the street, resulting in cracked touchscreen and lcd. Replaced both the touch and the lcd, everything seemed normal until I noticed that the middle part of the touch (a line going from the left to the right, around 1cm height) doesn't work, it just doesn't respond. Later, I got another new touchscreen and same story - same part of the screen doesn't work.
Maybe we have some kind of defect touch screens here in Bulgarian stores? Though I bought the two touches from two seperate stores. Or it's possible that it's something with the lcd? Even though it works normally, no strange behavior, no black spots, scratches or anything. Or could it be a software problem? Using Android 5.0.
Thanks in advance.
More likely to be motherboard problem if it's the same with 2 different screens being installed
Thanks for your answer.
One thing I forgot to mention - when testing the screen in Sony's Sketch app or in the service menu, if I run my finger from the top to the bottom, or the opposite way quickly, sometimes, the lines my finger makes don't get cut, i.e. it's like the screen is functioning properly, with no dead spots. What does this mean?
According to Sony support, it could be a compatibility issue between the phone/touchscreen/LCD, what do you think?