Related
Having seen some super creative members do some amazing stuff to make one-off accessories I thought we could start a thread to share ideas on making a magnetic Qi car dock for the N4. Too bad the Palm Touchstone isn't comparable because you can get them cheap to disassemble and work to mod. I am thinking of doing so with a Nexus Orb or whatever LG calls it when it is released. These other pad type chargers would need magnets incorporated. Then there is the power supply to figure out.
If there is an existing option, please share. If you have a plan, help us brainstorm it and share it.
N4 shipped today. Can't wait
lpasq said:
Having seen some super creative members do some amazing stuff to make one-off accessories I thought we could start a thread to share ideas on making a magnetic Qi car dock for the N4. Too bad the Palm Touchstone isn't comparable because you can get them cheap to disassemble and work to mod. I am thinking of doing so with a Nexus Orb or whatever LG calls it when it is released. These other pad type chargers would need magnets incorporated. Then there is the power supply to figure out.
If there is an existing option, please share. If you have a plan, help us brainstorm it and share it.
N4 shipped today. Can't wait
Click to expand...
Click to collapse
Yeah, its what i thought when they annouced the orb thing. I would love a charger that is like the orb, that i can just chuck my phone onto, no hassle, and the magnets just stick too it, and it charges.
Can't wait for this!
The roads I usually drive are a little bumpy, and having a SRA doesn't help with that, so I don't think I'd be comfortable putting my phone's fate in the hands of a couple of magnets.
Here is something I did a few years back with a Palm Pre & their Touchstone charger. http://forums.webosnation.com/webos...-mounting-charger-car-solution-its-alive.html
If the Orb is light enough, I bet the same could be done.
Would it be feaseable to use velcro on the back of a mat and stick it somewhere? I'm not sure if you'd be able to get a cigarette lighter plug for an existing mat. Probably too simple, but I don't know about modding equipment lol.
The orb might work if its in a center console tray where the phone is more so leaning against the orb rather than having the orb fulling support the weight of the phone.
This goes counter what most people want and expect out of a car dock though, its more like a car stand
I'd be more inclined to do it this way as a DIY solution as well since we won't known till we try it out sturdy it will be... And sliding down onto a rubber center tray wont do much in terms of harm to the phone
Sent from my Nexus 7 using Tapatalk 2
xAshxMoneyx said:
Would it be feaseable to use velcro on the back of a mat and stick it somewhere? I'm not sure if you'd be able to get a cigarette lighter plug for an existing mat. Probably too simple, but I don't know about modding equipment lol.
Click to expand...
Click to collapse
There are some advantages to using a Touchstone (or Wireless Orb)-like solution. Mats usually don't have magnets, and you need to align the thing, besides in a car it will move. So that's done. Also you can tilt the thing and use it with a car dock mount. I have a pretty cool one . The suction cup is big and a special sticky material that you can actually stick to the dashboard and it's extremely secure. I have had another Arkon mount and they don't disappoint with quality. They offer a lot of different design selections for mounts and docks (mix and match). I found the dock I bought the least intrusive/ugly (including other brands). But the mount is really amazing.
So I plan to do what the OP is planning. Only that I suspect the Wireless Orb will be too expensive, and so far for me all the other available Qi chargers are still very expensive, even compared to Powermat. So I'm waiting to see what comes out and if the prices go down.
jnewman1991 said:
The roads I usually drive are a little bumpy, and having a SRA doesn't help with that, so I don't think I'd be comfortable putting my phone's fate in the hands of a couple of magnets.
Click to expand...
Click to collapse
take a rubber band and tie it to the orb.
peestandingup said:
Here is something I did a few years back with a Palm Pre & their Touchstone charger. http://forums.webosnation.com/webos...-mounting-charger-car-solution-its-alive.html
If the Orb is light enough, I bet the same could be done.
Click to expand...
Click to collapse
dude. while driving today i imagined using my spare brodit clip like you did to somehow mount an "orb". how did you adress the the power conversion to 12v or did the touchstone have a car power adapter?
xAshxMoneyx said:
Would it be feaseable to use velcro on the back of a mat and stick it somewhere? I'm not sure if you'd be able to get a cigarette lighter plug for an existing mat. Probably too simple, but I don't know about modding equipment lol.
Click to expand...
Click to collapse
i have an lg mat coming to check it out. yeah the power supply question is one i hope someone with an electrical understanding can enlighten us on.
andy o said:
There are some advantages to using a Touchstone (or Wireless Orb)-like solution. Mats usually don't have magnets, and you need to align the thing, besides in a car it will move. So that's done. Also you can tilt the thing and use it with a car dock mount. I have a pretty cool one . The suction cup is big and a special sticky material that you can actually stick to the dashboard and it's extremely secure. I have had another Arkon mount and they don't disappoint with quality. They offer a lot of different design selections for mounts and docks (mix and match). I found the dock I bought the least intrusive/ugly (including other brands). But the mount is really amazing.
So I plan to do what the OP is planning. Only that I suspect the Wireless Orb will be too expensive, and so far for me all the other available Qi chargers are still very expensive, even compared to Powermat. So I'm waiting to see what comes out and if the prices go down.
Click to expand...
Click to collapse
akron and brodit too have been my go-to solutions when oem car docks don't cut it.
I think this is a great idea and would love to have a wireless charger for my car. I was thinking of finding a way of modding one of these
Shady Gambino said:
Arkon Galaxy Nexus Dash mount
Click to expand...
Click to collapse
to allow wireless charging and NFC to turn on Bluetooth and GPS, open GMusic and turning off WiFi. Don't know how easy it would be though.
Also, if you can only find mains powered chargers you could always check out something like this.
Lastly, multi-quote might be good for replying to multiple posts
lpasq said:
i have an lg mat coming to check it out. yeah the power supply question is one i hope someone with an electrical understanding can enlighten us on.
Click to expand...
Click to collapse
EE here, well CE but its the same major at Purdue minus 2 classes. Okay when it comes to the wireless charging inductance Faradays law blah blah.. No one cares about that not even me really haha.
What you want to know is will it work in your car with a car charger, there is always a way whether it be running an inverter right off of the battery or from the Aux power source.
One factor is unknown right now, or at least I haven't looked enough.. What is the amperage draw of the charging station. Most phones charge off of 5V at 1 amp. Tablets usually 5V 2.1A and so on besides Sony Tablet S...
What I'm getting at is most chargers then charge at these voltages so if the orb needs 12V, 120V w.e. it may be anything other than 5V an inverter will have to be run, with the original AC adapter. Unless you can find a charger that charges at the correct voltages the original AC adapter plugged into the invertor will be your best idea for now.
Now onto the car mount idea, I also had one for my pre and my current touchstone modded Nexus ..
I am thinking of buying an energizer Qi station and finding a way to mount at an angle with some sort of lip on the bottom to stop a slide off, but may look terrible have to see and energizer station in person first..
I don't really care to mount my phone to use as a GPS or anything like that. That being said I will probably make some sort of holder thing to put in my cup holder to charge the phone when I am in my car. So now dumb question; the phone being in a vertical position should not affect the qi charging as long as it is close enough right? Once I have my phone and get around to it I will post pictures of it. I might be a few weeks though, got backordered.
cchap07 said:
I don't really care to mount my phone to use as a GPS or anything like that. That being said I will probably make some sort of holder thing to put in my cup holder to charge the phone when I am in my car. So now dumb question; the phone being in a vertical position should not affect the qi charging as long as it is close enough right? Once I have my phone and get around to it I will post pictures of it. I might be a few weeks though, got backordered.
Click to expand...
Click to collapse
from looking at this http://www.ifixit.com/Teardown/Nexus+4+Teardown/11781/1 and already having a qi pad it seems the wireless charging contact area is rather centered.
lpasq said:
from looking at this http://www.ifixit.com/Teardown/Nexus+4+Teardown/11781/1 and already having a qi pad it seems the wireless charging contact area is rather centered.
Click to expand...
Click to collapse
So you have a Qi charger already? My question is how good is the magnetic pull with it? Also which one do you have? I want to try and mount the charger to my wall like I had my touchstone for my GN... But that had a good magnetic pull due to the touchstone and rare earth magnets
runningwarrior08 said:
So you have a Qi charger already? My question is how good is the magnetic pull with it? Also which one do you have? I want to try and mount the charger to my wall like I had my touchstone for my GN... But that had a good magnetic pull due to the touchstone and rare earth magnets
Click to expand...
Click to collapse
i have these and neither have magnetic pull as you'd need: http://forum.xda-developers.com/showthread.php?t=1962570&page=31
lpasq said:
i have these and neither have magnetic pull as you'd need: http://forum.xda-developers.com/showthread.php?t=1962570&page=31
Click to expand...
Click to collapse
Hey if you have the time could you take a ruler to your lg pad? I I want to know the dimensions to see if my idea could even work with it. Unfortunately I was not able to find those dimensions anywhere online :/
cchap07 said:
Hey if you have the time could you take a ruler to your lg pad? I I want to know the dimensions to see if my idea could even work with it. Unfortunately I was not able to find those dimensions anywhere online :/
Click to expand...
Click to collapse
i will but i am away from it until later
Hey guys and gals,
I am looking to purchase a Car Qi Charger. I have not yet found a thread for this, though there were options mentioned in the regular Qi Charger thread, but this one is specifically for the car.
I have found 2 which look promising but just want to know other peoples input. Plus want to know if they will hold with a case on the phone.
Itian: http://www.amazon.com/dp/B00M685JTG/
C1: http://www.amazon.com/dp/B00H1XU6A8/
Both of these look pretty good, have mixed reviews, but just want to know what you guys think would be best and if anyone actually used these in the past?
I know that there is also the AirDock, but I doubt it would hold the Note 4 all that well, so not bothering to include it.
I currently use this item in my car as a regular holder, so I wish there was one (other than the AirDock) which can utilize the ability to hold and charge the phone by mounting into the CD Slot of the car head unit: http://www.amazon.com/dp/B004G1L52Q/
Please add to this list if anyone has better solutions.
I've been agonizing over this choice myself, but I'm even worse off than you- I've gotten hooked on having a magnetic mount (currently using the Bracketron Si earth elements mount), and I REALLY like the S-View cover, so what I really want is a car dock that does Qi charging AND holds the phone magnetically, with strong enough magnets to hold through the S-View flap! Unfortunately, it seems that at this point there aren't ANY magnetic Qi docks (apart from the Airdock, and I'm right on the same page as you there), let alone one that would work through the S-View flap! So basically if I want Qi I'm stuck either sacrificing the magnetic holding feature and going with arms, or I'll have to build my own custom dock. Haven't quite decided which route I'll go yet, but man do I wish there was a decent magnetic Qi dock!
Anyway, as for Qi docks that DO exist now, in my research I've found a couple that seem to really stand out and come up time and again as the go-to's for Qi in the car. Here's the best options I've seen so far:
The iOttie: http://www.iottie.com/Product/Detai...for Google Nexus 5 and Qi Enabled Smartphones
Amazon's got this one for $55 also: http://www.amazon.com/iOttie-Wireless-Standard-Motorola-Smartphones/dp/B00IRHQZTI
Nokia CR-201: http://www.mobilefun.com/38310-nokia-qi-wireless-charging-nfc-car-holder-cr-201-Reviews.htm
bit more expensive, but has some nice features.
Then there's this:http://www.tylt.com/vu-car-wireless-charger/
Not available yet, but it looks like it may be a decent option.
I've read a lot of mixed reviews on the plethora of non-name brand Qi gear thats out there, some people say that they work just as well for cheaper prices and others say that they're total junk. I guess I'd say if you see one you really like then just make sure that you read reviews on it so you don't get stuck with something that doesn't work or worse.
As for a mount that uses the CD slot, I haven't seen any Qi docks that come with that option but many docks share similar or identical mounting solutions, so once you find a Qi dock that you like you could probably find a non-qi dock that mounts in the CD slot and then just replace the actual dock with the Qi one. Personally I don't think I'd trust the CD slot to hold up a phone this heavy, I'd be worried about damaging the CD player not to mention it'll be much less steady, but hey if that's what you like then good luck!
Thanks for the input
I will have to look into the Ottie one as it does look fairly decent. The Nokia one is way over priced and I cannot say I am a fan of it. The Tylt is nice, but I am sure it is going to be quite costly due to their original designs of their products.
The reason I want it as a CD mount is because I currently have one (minus the Qi of course) and it works just fine, hold the phone super good, without issues at all what so ever. Plus, no damage done to the head unit or CD Slot (not that I use CDs of course lol).
I just want something very low profile, but for it to do the job you know. The reason why I do not want anything mounted on the windshield is because I hate wires and I like for the phone to be close to me while I drive. I do not text and drive though! I plan to run the wire behind my head unit and bring out just enough to plug into the Qi holder. This will be a pain in the rear of course, but I am anal when it comes to wires lol. I have a radar, dash cam, and soon a Qi charger, all of which I want to make fairly invisible with regards to wires.
soul777toast said:
I've been agonizing over this choice myself, but I'm even worse off than you- I've gotten hooked on having a magnetic mount (currently using the Bracketron Si earth elements mount), and I REALLY like the S-View cover, so what I really want is a car dock that does Qi charging AND holds the phone magnetically, with strong enough magnets to hold through the S-View flap! Unfortunately, it seems that at this point there aren't ANY magnetic Qi docks (apart from the Airdock, and I'm right on the same page as you there), let alone one that would work through the S-View flap! So basically if I want Qi I'm stuck either sacrificing the magnetic holding feature and going with arms, or I'll have to build my own custom dock. Haven't quite decided which route I'll go yet, but man do I wish there was a decent magnetic Qi dock!
Anyway, as for Qi docks that DO exist now, in my research I've found a couple that seem to really stand out and come up time and again as the go-to's for Qi in the car. Here's the best options I've seen so far:
The iOttie: http://www.iottie.com/Product/Detai...for Google Nexus 5 and Qi Enabled Smartphones
Amazon's got this one for $55 also: http://www.amazon.com/iOttie-Wireless-Standard-Motorola-Smartphones/dp/B00IRHQZTI
Nokia CR-201: http://www.mobilefun.com/38310-nokia-qi-wireless-charging-nfc-car-holder-cr-201-Reviews.htm
bit more expensive, but has some nice features.
Then there's this:http://www.tylt.com/vu-car-wireless-charger/
Not available yet, but it looks like it may be a decent option.
I've read a lot of mixed reviews on the plethora of non-name brand Qi gear thats out there, some people say that they work just as well for cheaper prices and others say that they're total junk. I guess I'd say if you see one you really like then just make sure that you read reviews on it so you don't get stuck with something that doesn't work or worse.
As for a mount that uses the CD slot, I haven't seen any Qi docks that come with that option but many docks share similar or identical mounting solutions, so once you find a Qi dock that you like you could probably find a non-qi dock that mounts in the CD slot and then just replace the actual dock with the Qi one. Personally I don't think I'd trust the CD slot to hold up a phone this heavy, I'd be worried about damaging the CD player not to mention it'll be much less steady, but hey if that's what you like then good luck!
Click to expand...
Click to collapse
I found one on sale (non brand name though)
http://www.aliexpress.com/item/QI-W...a-Lumia-920-820-Free-shipping/2041086689.html
and another
http://www.aliexpress.com/item/New-...S3-S4-Note2-Nexus-Nokia-Lumia/1795791846.html
I use this one:
http://smile.amazon.com/gp/product/B00FC0NBI6/
I used it for my S3, and it does fit a Note 4 with the Ringke Fusion case on it with a little room to spare. I haven't used it for Wireless Charging on my Note 4 yet because I'm still waiting for my wireless receiver to arrive, but it has worked perfectly on my S3 for the last 6 months.
It doesn't go in a CD slot, but it does offer both the suction cup and the air vent hooks.
elite-fusion said:
I will have to look into the Ottie one as it does look fairly decent. The Nokia one is way over priced and I cannot say I am a fan of it. The Tylt is nice, but I am sure it is going to be quite costly due to their original designs of their products.
The reason I want it as a CD mount is because I currently have one (minus the Qi of course) and it works just fine, hold the phone super good, without issues at all what so ever. Plus, no damage done to the head unit or CD Slot (not that I use CDs of course lol)..
Click to expand...
Click to collapse
Keep in mind that none of the chargers that people listed here except for the Itian have the One Touch operation. Paradoxically that includes the iOttie charger (people who invented it). So to me they all seem ridiculously overpriced for the limited functionality they provide. I am using Itian, and so far pretty happy with it. If you really need some sort of specific mount (CD, Vent, or whatever), you may be able to take Itian head (it's detachable) and glue it to the mount that you like. I had to do that myself because by dash has rough texture and the only suction cup that would stick is iOttie gel cap. So I used a suction cup plus arm form a low end iOttie charger ($13.99 on sale) and Itian head ($27.99). Cheaper and more functional than name brands.
railshot said:
Keep in mind that none of the chargers that people listed here except for the Itian have the One Touch operation. Paradoxically that includes the iOttie charger (people who invented it). So to me they all seem ridiculously overpriced for the limited functionality they provide. I am using Itian, and so far pretty happy with it. If you really need some sort of specific mount (CD, Vent, or whatever), you may be able to take Itian head (it's detachable) and glue it to the mount that you like. I had to do that myself because by dash has rough texture and the only suction cup that would stick is iOttie gel cap. So I used a suction cup plus arm form a low end iOttie charger ($13.99 on sale) and Itian head ($27.99). Cheaper and more functional than name brands.
Click to expand...
Click to collapse
Thanks for the input
I actually ordered the C1 yesterday, but ordered it from AliExpress for $34 and should hopefully be here in about a week or so.
I will report back. I am wondering about purchasing the Itian though and seeing which one is actually better, but not sure yet.
I used AirDock with my LG G3. It should work with note4 also. Got nothing bad to say about that dock!
theairdock dot com
loonyone said:
I use this one:
http://smile.amazon.com/gp/product/B00FC0NBI6/
I used it for my S3, and it does fit a Note 4 with the Ringke Fusion case on it with a little room to spare. I haven't used it for Wireless Charging on my Note 4 yet because I'm still waiting for my wireless receiver to arrive, but it has worked perfectly on my S3 for the last 6 months.
It doesn't go in a CD slot, but it does offer both the suction cup and the air vent hooks.
Click to expand...
Click to collapse
Disregard my earlier suggestion. Now that I finally have a Qi Receiver sticker for my Note 4, I'm finding that this one doesn't charge because the receiver isn't centered in the phone. I did cut up my receiver and turn the coil as close to the center as possible (careful not to cut the actual wires!), but it still doesn't charge for more than 2 seconds before the charging indicator turns off on the phone.
I ordered this one as a replacement and it's working great:
http://smile.amazon.com/gp/product/B00F5XPCSC/
Caveat: I don't know if it would work with the receiver sticker still in it's original configuration... :/ If I had to guess, I'd say it would because I can slide my phone to either side a little bit and I don't lose connection.
I had it with my Note 3. With the Note 4, I upgraded the car charger to a QC 2.0 charger and my car charging need is solved. It charges way faster than the best Qi charger that I've tried.
elite-fusion said:
Hey guys and gals,
I am looking to purchase a Car Qi Charger. I have not yet found a thread for this, though there were options mentioned in the regular Qi Charger thread, but this one is specifically for the car.
I have found 2 which look promising but just want to know other peoples input. Plus want to know if they will hold with a case on the phone.
Itian: http://www.amazon.com/dp/B00M685JTG/
C1: http://www.amazon.com/dp/B00H1XU6A8/
Both of these look pretty good, have mixed reviews, but just want to know what you guys think would be best and if anyone actually used these in the past?
I know that there is also the AirDock, but I doubt it would hold the Note 4 all that well, so not bothering to include it.
I currently use this item in my car as a regular holder, so I wish there was one (other than the AirDock) which can utilize the ability to hold and charge the phone by mounting into the CD Slot of the car head unit: http://www.amazon.com/dp/B004G1L52Q/
Please add to this list if anyone has better solutions.
Click to expand...
Click to collapse
Have the air dock with the goose neck mount. It was garbage and then I saw that they have the magnetic stickers. I attach the magnetic sticker to the back of the case I have the tough armor case. Now it is absolutely amazing I can't imagine anything better anyone looking for charger
gingi999 said:
Have the air dock with the goose neck mount. It was garbage and then I saw that they have the magnetic stickers. I attach the magnetic sticker to the back of the case I have the tough armor case. Now it is absolutely amazing I can't imagine anything better anyone looking for charger
Click to expand...
Click to collapse
Can someone with the AirDock comment on the strength of the magnet? I've been pretty interested in it, but the problem for me is that I really like the S-View case, so the magnet in the AirDock would need to be strong enough to hold through the S-View flap. Maybe someone could test how well it holds with a piece of cardboard or something between the AirDock and the phone? I've totally gotten addicted to having a magnetic dock, but I also love my S-View and I want wireless charging! I mean cmon, can't I have everything???
soul777toast said:
Can someone with the AirDock comment on the strength of the magnet? I've been pretty interested in it, but the problem for me is that I really like the S-View case, so the magnet in the AirDock would need to be strong enough to hold through the S-View flap. Maybe someone could test how well it holds with a piece of cardboard or something between the AirDock and the phone? I've totally gotten addicted to having a magnetic dock, but I also love my S-View and I want wireless charging! I mean cmon, can't I have everything???
Click to expand...
Click to collapse
Just use these, its what I do and it works amazing
Right, I would assume I'd need to use the sticker but what I'm wondering is whether the AirDock will hold the phone with the S-View cover flipped around to the back. Basically the sticker would be on the back of the phone, then the S-View cover would be between the sticker and the AirDock. Are the magnets in the AirDock strong enough to hold the phone even with the cover between them and the sticker?
soul777toast said:
Can someone with the AirDock comment on the strength of the magnet? I've been pretty interested in it, but the problem for me is that I really like the S-View case, so the magnet in the AirDock would need to be strong enough to hold through the S-View flap. Maybe someone could test how well it holds with a piece of cardboard or something between the AirDock and the phone? I've totally gotten addicted to having a magnetic dock, but I also love my S-View and I want wireless charging! I mean cmon, can't I have everything???
Click to expand...
Click to collapse
The nexus 5 has 4 metal discs in it specifically to make magnetic docks easy and allow for some self aligning.
The airdock with the nexus 5 works reasonable well. Not perfect, I do have to realign the phone more than once per day and end up grabbing or holding if if there's a big dip/bump/whatever.
However even with a thin case the n5 is unusable with the air dock. What's worse is that the airdock + note 4 is worse than the airdock + n5. I'm guessing the note 4 doesn't have the 4 discs.
I have an airdock and it works great with the Note 4.
i use an itian charger and it works great with double sided scotch tape for outdoor mounting. sticks vertically to the dash and holds the note 4 with two prongs.
While shopping for cars, I found out the camry and Avalon can come with wireless charging. I ended up with an Avalon Hybrid with tech pkg.
I'm not happy with this one - lost allways the connection - looking now one with three coils like my Itian desk charger, this one works perfect....
loonyone said:
I use this one:
http://smile.amazon.com/gp/product/B00FC0NBI6/
I used it for my S3, and it does fit a Note 4 with the Ringke Fusion case on it with a little room to spare. I haven't used it for Wireless Charging on my Note 4 yet because I'm still waiting for my wireless receiver to arrive, but it has worked perfectly on my S3 for the last 6 months.
It doesn't go in a CD slot, but it does offer both the suction cup and the air vent hooks.
Click to expand...
Click to collapse
I like the iOttie...
I just got the current Samsung Vehicle dock and have to say, it's TERRIBLE. There are large side arms that grab the phone and they GET IN THE WAY. There doesn't appear to be any way to reduce this, short of hacking up the plastic and rubber.
It's a shockingly dumb design. It's not like the arms need to be that deep. Because none of the phones intended for this dock would ever need that much grab area. Because if you put a thick case on the phone, well, you'd have no need for the wireless charging aspect of this dock. Which is the only reason you'd shell out the money for it, as it's quite a lot more expensive than a non-charging one. That and the click-to-release button is kind of awkward to use. It's tucked around the back and, depending on how you mount the dock, kind of hard to get to if the usb power cable is in the way.
I should point out that with a Spigen Neo Hybrid case the S6 still charges in this dock. But the side ears still get in the way.
So, any suggestions on other wireless Qi charging vehicle docks that are known to work reliably with the S6? While still allowing some reasonable use of the phone while docked?
wkearney99 said:
I just got the current Samsung Vehicle dock and have to say, it's TERRIBLE. There are large side arms that grab the phone and they GET IN THE WAY. There doesn't appear to be any way to reduce this, short of hacking up the plastic and rubber.
It's a shockingly dumb design. It's not like the arms need to be that deep. Because none of the phones intended for this dock would ever need that much grab area. Because if you put a thick case on the phone, well, you'd have no need for the wireless charging aspect of this dock. Which is the only reason you'd shell out the money for it, as it's quite a lot more expensive than a non-charging one. That and the click-to-release button is kind of awkward to use. It's tucked around the back and, depending on how you mount the dock, kind of hard to get to if the usb power cable is in the way.
I should point out that with a Spigen Neo Hybrid case the S6 still charges in this dock. But the side ears still get in the way.
So, any suggestions on other wireless Qi charging vehicle docks that are known to work reliably with the S6? While still allowing some reasonable use of the phone while docked?
Click to expand...
Click to collapse
Airdock 2.0...
Tylt makes a dock with wireless charging built in. If I was gunna get a car dock that's what I would look in to
Sent from my Nexus 6 using XDA Free mobile app
The reviews for the Tylt are all over the map, and lots focus on crappy manufacturing issues.
The Airdock isn't for me. I prefer having some physical borders of some sort to avoid having to fiddle with positioning the phone for charging.
I've had Droid slider phones for years and loved their molded cradles (that and the keyboard). I've used a number of Qi charging pads with some tablets and really dislike not having a reliable plunk-it-down way to get them situated. Curiously, though, a Bobj case for a Nexus 7 straddles a Docooler pad perfectly. Trouble is it leaves the tablet looking like a drink coaster...
The Samsung dock fit right onto the same ball as the one in the back of my D4 mount.
I've also kept all my vehicle mounts on a Pro-Clip bracket. I'm using this one currently. I've had different mounting brackets over the years, and swapped around different mounting components. I use a Dual-T screwed onto the bracket and then a Dual-T Ball (from Arkon, iirc). This lets me pop just about all of it off the bracket to reduce theft risks. These have been MUCH more stable and useful (for me) than any sort of suction cup, vent or other mounting gizmos.
I've ordered an iOttie, we'll see how that goes.
Yep, as I expected, the iOttie is an improvement, at least in usability of the phone while docked. The side clamps on the iOttie sit higher on the side of the S6 than the Samsung dock. The right side clamp is mighty close to the side power button, but JUST barely below it. I may, at some point, nibble a small bit of the rubber out of that part of the clamp to avoid the button entirely. But for now it's not a problem. The S6 charges just fine in the dock. The lower clamp drops down enough to allow the S6 to detect the coil. And it also slides left/right to allow plugging an audio cable into the headphone jack on the bottom of the S6, should you so desire.
I'll report back more in another thread for it. But that won't happen until I get my replacement Pro-Clip mount for my Jeep. I managed to crack the tab that it uses to fit into the seam of the dashboard. Either it was me being ham-fisted, UV damage to the plastic or some combination of the two.
Regardless, FedEx tracking claims it'll be here on Tuesday. I won't hold my breath as FedEx has routinely missed their delivery targets. UPS, on the other hand, seems to be glad to get stuff in and out of their system as fast as possible, regardless of the delivery speed selected. FedEx seems to think that unless you've 'bent over' for their overnight fee then they'll route it to Hell and back instead of anything that might be quicker.
How is the charging speed in the Qi docks compared to the power usage of the phone sith gps nav running? I remember most of the phones I had were slowly discharging when using 1 amp charger in the car, I had to switch to 2 amps to make sure they sustain the power drain and charge the phone while navigating. Qi has like 750 mA charging current if I recall, isn't that too little?
Been using the air dock for couple of months now. Overall have really enjoyed it, works well when you position it properly.
It takes a bit do getting used to but once you have the right surface and positioning technique it works a charm!
+1 for air dock.
Sent from my SM-G920I using XDA Free mobile app
Hi All,
I ordered my Note 9 512gb a little while back and have a few more weeks to wait. While I'm waiting I'm getting all the stuff I think I want to have with it. One of those things is a wireless charging car dock. There are too many out there to really know which is best so I thought I would ask the people that already have the note9 and possibly are already using a wireless car dock. Thanks!
I'm interested too. I'm searching for one usable with the clear view cover. Magnetic one would be great but I'm scared by the metallic ring and Qi interferences. I'm thinking of building my own based on the magnet already in the cover...
Nobody has a pony in this race?
I went with Choetech one for my other car because it has a USB C inout for power. Works good, about the same as the iottie one touch except not as convenient.
Sent from my SM-N960U using Tapatalk
gottria said:
I went with Choetech one for my other car because it has a USB C inout for power. Works good, about the same as the iottie one touch except not as convenient.
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
Thanks Gottria, I'll look into it :good:
I like the Choetech charger but 2 things bug me. The arms are slightly curved inwards toward the end and when the phone sits in the cradle all the way back the tips of the arms slightly block the screen. And forget about accessing the side edge function. 2nd is the mount, it doesn't use the 17mm ball and it's reversed compared to other mounts. The socket needs to be on the back of the device instead of the ball.
Sent from my SM-N960U using Tapatalk
gottria said:
I like the Choetech charger but 2 things bug me. The arms are slightly curved inwards toward the end and when the phone sits in the craddle all the way back the tips of the arms slightly block the screen. And forget about accessing the side edge function. 2nd is the mount, it doesn't use the 17mm ball and it's reversed compared to other mounts. The socked needs to be on the back of the device instead of the ball.
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
Thanks gottria. I use a panavise mount in my C63 and have a 17mm ball to hook the dock onto. This would've completely screwed up my setup :highfive:
I've just bought the choetech fast wireless charger mount. I have a Vauxhall vivaro and theres no good way to mount it so its on the windscreen towards the top with a USB trailing down to the quick charge 12v plug I use. I can see it being a pain but doesn't really block my view. I prefer air vent mounts had a baseus wireless charger but didn't even charge the phone. Compared to the choetech its much more cheapy and flimsy the choetech feels solid. Which is good but if anyone can advice a way I Can get a air vent mount to hold it to that then would prefer it.
My main worry about the choetech is with cold freezing weather coming in and frozen windscreens how well will it actually hold up as dont want my £1000 phone dropping and smashing. :fingers-crossed:
Idrogn said:
I'm interested too. I'm searching for one usable with the clear view cover. Magnetic one would be great but I'm scared by the metallic ring and Qi interferences. I'm thinking of building my own based on the magnet already in the cover...
Click to expand...
Click to collapse
If you find a solution, let me know. I too am struggling to find one that works with the clear view cover
I have to say that when it comes to car mounts period, the folks at EXOGEAR are the best from my experience over the years. I've used their tablet and smartphone mounts. These mofos stick to practically any surface. Couple that with the way the phone snaps in and out of the mounts? It's so quick and easy.
But now I'm learning these guys make wireless chargers for their mounts. It says it goes "up to" 9v so I'm curious how fast it actually charges the N9.
Since it's EXOGEAR and I swear by their suction cup performance I'm going to buy it soon as it comes available and I'll check back later and let y'all know how it worked out. I honestly never felt the need to have a wireless charger in my car because I typically have plenty of battery life by the time I get home but this wireless charger peaked my interest.
https://exogear.com/product/exomount-qi/
I purchased the iOttie and loved it enough to purchase a second one for my wifes car. I havent found a single suction cup that would work with my leather in the car so I purchased a panavise mount and 17mm ball adapter to mount it. But while waiting for those to arrive I tested the suction cup and it holds... amazingly. The mount hasn't shifted in the slightest and I have launched the car from a dead stop a few times trying to get it to shake lose. I can feel my body violently being forced back into the seat but the mount doesn't look fazed. First time I can actual praise a suction cup mounting system.
Also I thought I should add that "Fast Charging" is displayed when the phone is docked.
I'm using the Baseus Qi Wireless Magnetic Fast Charger and it's pretty good. The only downside is if you have stiff car suspension (like in sports car) and get into a big bump, the phone can lose grip and fall.
https://m.aliexpress.com/item/32836...l&spm=2114.12010612.8148356.49.9226935c3ACvcY
Since my car already has a navigation screen I don't need the phone up in the vent area. Besides I didn't like any of the in vent holders. The magnetic phone holders out there I don't like since if i hit a bump or pothole the phone will fall due to its weight. There is a coin slot holder in my care but the wireless ones usually have a base that won't fit in that holder. But I then found a wood wireless charger a while back that had a metal base which is removable. I placed it in the coin holder and it charges my then Note 8, now Note 9 even with a case. Granted it is not a fast charge type of wireless charger but it does charge my phones quickly enough on the half hour of driving from work to home. So it does the job enough for me, looks great and I don't have to worry about the phone falling off a magnet or blocking the vent.
Got this charger for £12.99 on Amazon:
mod edit - link removed
Feels cheap and looks cheap but it works and does the job well enough. It's foldable too, so you can use it either horizontal or vertical.
Worth it, if you need to buy a cheap one to leave at the office.
Would be great if wireless charger can work even with a metal piece on the back of casing for magnetic car phone holder
speed8081 said:
Would be great if wireless charger can work even with a metal piece on the back of casing for magnetic car phone holder
Click to expand...
Click to collapse
There are magnetic holders that claim to work without blocking the wireless charger. They use a metal piece shaped like an upside down "U" instead of a square one. Given all the warnings against mixing credit cards and metal on cases and what not with wireless charging, I'd be weary of trying it out myself on my own phone, but they do exist. Just search for wireless charging compatible magnetic mount, I'm sure some will turn out.
Could be that I'm missing something (perhaps even a crucial factor), but why couldn't you use a wireless charger at the same time you have a metal plate in your case? It can't be harmful to the phone right?
I have a strong enough carkit so I can use a relatively small circular piece of metal in my slim fit case for the Note 9, works a charm. I've tested the location in the case, so I can use this in my car and still be able to put it down on a wireless charger so it charges without a problem. Okay, so when I put my phone on the charger pad a bit to far down or up, it doesn't charge, but that's just a matter of trying which position is best and this will become a non-issue the more you use it (since you know exactly how to put it on the charging pad).
Please enlighten me whether or not it could be harmful in any way to the phone because I don't want to risk a $1250 phone for the convenience of charging wirelessly. But I haven't ran into trouble this way just yet. Been doing this also with my Galaxy S8 for over a year btw, it still works like new.
Btw, @OP, can you share a link to the charger?
bramgg said:
Could be that I'm missing something (perhaps even a crucial factor), but why couldn't you use a wireless charger at the same time you have a metal plate in your case? It can't be harmful to the phone right?
I have a strong enough carkit so I can use a relatively small circular piece of metal in my slim fit case for the Note 9, works a charm. I've tested the location in the case, so I can use this in my car and still be able to put it down on a wireless charger so it charges without a problem. Okay, so when I put my phone on the charger pad a bit to far down or up, it doesn't charge, but that's just a matter of trying which position is best and this will become a non-issue the more you use it (since you know exactly how to put it on the charging pad).
Please enlighten me whether or not it could be harmful in any way to the phone because I don't want to risk a $1250 phone for the convenience of charging wirelessly. But I haven't ran into trouble this way just yet. Been doing this also with my Galaxy S8 for over a year btw, it still works like new.
Btw, @OP, can you share a link to the charger?
Click to expand...
Click to collapse
I put a link to charger on the video description.
I just bought this one: https://www.amazon.com/dp/B07C5KCQQ4/
Fast charges a little slower than directly plugging the Samsung charger into the phone (as expected).
The hinge is a tight friction fit, so the angle is adjusted wherever you like.