I just got the current Samsung Vehicle dock and have to say, it's TERRIBLE. There are large side arms that grab the phone and they GET IN THE WAY. There doesn't appear to be any way to reduce this, short of hacking up the plastic and rubber.
It's a shockingly dumb design. It's not like the arms need to be that deep. Because none of the phones intended for this dock would ever need that much grab area. Because if you put a thick case on the phone, well, you'd have no need for the wireless charging aspect of this dock. Which is the only reason you'd shell out the money for it, as it's quite a lot more expensive than a non-charging one. That and the click-to-release button is kind of awkward to use. It's tucked around the back and, depending on how you mount the dock, kind of hard to get to if the usb power cable is in the way.
I should point out that with a Spigen Neo Hybrid case the S6 still charges in this dock. But the side ears still get in the way.
So, any suggestions on other wireless Qi charging vehicle docks that are known to work reliably with the S6? While still allowing some reasonable use of the phone while docked?
wkearney99 said:
I just got the current Samsung Vehicle dock and have to say, it's TERRIBLE. There are large side arms that grab the phone and they GET IN THE WAY. There doesn't appear to be any way to reduce this, short of hacking up the plastic and rubber.
It's a shockingly dumb design. It's not like the arms need to be that deep. Because none of the phones intended for this dock would ever need that much grab area. Because if you put a thick case on the phone, well, you'd have no need for the wireless charging aspect of this dock. Which is the only reason you'd shell out the money for it, as it's quite a lot more expensive than a non-charging one. That and the click-to-release button is kind of awkward to use. It's tucked around the back and, depending on how you mount the dock, kind of hard to get to if the usb power cable is in the way.
I should point out that with a Spigen Neo Hybrid case the S6 still charges in this dock. But the side ears still get in the way.
So, any suggestions on other wireless Qi charging vehicle docks that are known to work reliably with the S6? While still allowing some reasonable use of the phone while docked?
Click to expand...
Click to collapse
Airdock 2.0...
Tylt makes a dock with wireless charging built in. If I was gunna get a car dock that's what I would look in to
Sent from my Nexus 6 using XDA Free mobile app
The reviews for the Tylt are all over the map, and lots focus on crappy manufacturing issues.
The Airdock isn't for me. I prefer having some physical borders of some sort to avoid having to fiddle with positioning the phone for charging.
I've had Droid slider phones for years and loved their molded cradles (that and the keyboard). I've used a number of Qi charging pads with some tablets and really dislike not having a reliable plunk-it-down way to get them situated. Curiously, though, a Bobj case for a Nexus 7 straddles a Docooler pad perfectly. Trouble is it leaves the tablet looking like a drink coaster...
The Samsung dock fit right onto the same ball as the one in the back of my D4 mount.
I've also kept all my vehicle mounts on a Pro-Clip bracket. I'm using this one currently. I've had different mounting brackets over the years, and swapped around different mounting components. I use a Dual-T screwed onto the bracket and then a Dual-T Ball (from Arkon, iirc). This lets me pop just about all of it off the bracket to reduce theft risks. These have been MUCH more stable and useful (for me) than any sort of suction cup, vent or other mounting gizmos.
I've ordered an iOttie, we'll see how that goes.
Yep, as I expected, the iOttie is an improvement, at least in usability of the phone while docked. The side clamps on the iOttie sit higher on the side of the S6 than the Samsung dock. The right side clamp is mighty close to the side power button, but JUST barely below it. I may, at some point, nibble a small bit of the rubber out of that part of the clamp to avoid the button entirely. But for now it's not a problem. The S6 charges just fine in the dock. The lower clamp drops down enough to allow the S6 to detect the coil. And it also slides left/right to allow plugging an audio cable into the headphone jack on the bottom of the S6, should you so desire.
I'll report back more in another thread for it. But that won't happen until I get my replacement Pro-Clip mount for my Jeep. I managed to crack the tab that it uses to fit into the seam of the dashboard. Either it was me being ham-fisted, UV damage to the plastic or some combination of the two.
Regardless, FedEx tracking claims it'll be here on Tuesday. I won't hold my breath as FedEx has routinely missed their delivery targets. UPS, on the other hand, seems to be glad to get stuff in and out of their system as fast as possible, regardless of the delivery speed selected. FedEx seems to think that unless you've 'bent over' for their overnight fee then they'll route it to Hell and back instead of anything that might be quicker.
How is the charging speed in the Qi docks compared to the power usage of the phone sith gps nav running? I remember most of the phones I had were slowly discharging when using 1 amp charger in the car, I had to switch to 2 amps to make sure they sustain the power drain and charge the phone while navigating. Qi has like 750 mA charging current if I recall, isn't that too little?
Been using the air dock for couple of months now. Overall have really enjoyed it, works well when you position it properly.
It takes a bit do getting used to but once you have the right surface and positioning technique it works a charm!
+1 for air dock.
Sent from my SM-G920I using XDA Free mobile app
Related
Hi
I have the very nice Samsung book case and was thinking of getting a dock. Anyone know if the table will fit in a dock (Samsung or otherwise) without needing to be removed from the case ?
Thanks
What features are you looking for in your dock? If you just looking for something that'll hold your tablet at a good viewing angle while charging, you could 3D print (or commission someone to 3D print) this dock.
It works well, with and without my case. (There's two versions of the dock: standard and jumbo. I've tried both. I personally prefer the standard.)
colbymulkey said:
What features are you looking for in your dock? If you just looking for something that'll hold your tablet at a good viewing angle while charging, you could 3D print (or commission someone to 3D print) this dock.
It works well, with and without my neoprene case. (There's two versions of the dock: standard and jumbo. I've tried both. I personally prefer the standard.)
Click to expand...
Click to collapse
Hot much does it cost to get this printed? And does it hold the charging cable in place where all you have to do is slip the tablet into the dock and it connects?
nice answer! thanks, that would probably work. I'll look in how much it would cost to print.
This image - image:103984- suggests that the charger gets held in place by the 2 halves. I doubt its as a snug as a purpose built dock but it looks good enough
shaxs said:
Hot much does it cost to get this printed? And does it hold the charging cable in place where all you have to do is slip the tablet into the dock and it connects?
Click to expand...
Click to collapse
Printing cost would depend on who you commissioned to print the dock. If you found someone local and could avoid shipping costs, it could be done very, very cheaply. (The dock I'm using is actually an early prototype from the same guy that wrote the Thingiverse post I linked to, so I lucked out and got mine for free.)
It holds the charging cable firmly in place; requires very little effort to dock, outside of making sure the tablet's centered as you lower it. It seems to be a little sturdier when docked in its case, but its still perfectly acceptable sans-case too.
I leave a dedicated OEM charging cable in my dock. In the prototype I got, the cable had to be kinked at an extreme angle to keep the connection point firmly in place. It didn't damage my cable, but making a habit of kinking the cable every time you used the dock probably would...
Of course, he may have found another way around this before he posted on Thingiverse. I'll try to find out for sure...
I cant wait until 3d printers are cheap(er). In the mean time I found this case http://www.amazon.com/gp/product/B006OBKDFQ/ref=oh_o03_s00_i03_details which allows me to dock without taking the tab out. Using the same method for using it in the stand of the case, you unhinge the bottom part of the case and dock it. Works pretty well.
It does not fit into my charging, 3.5mm out dock.
The dock has no room for ANY case. Maybe a ZIS.
So i found that if you get the Sprint version of HTC evo LTE car mount and unscrew the pieces and remove the charger port on the mount as well as the grey piece as shown in the pictures. It fits amazing! highly recommended if you have a otterbox commuter on your phone!
Makes a great dash cam..
http://www.youtube.com/watch?v=lDgsHlY91mM&feature=share&list=UUYfRasme5t_BiD7RmX-JG5w
Pics in second post.
Sent from my SPH-L720 using xda app-developers app
How effective are the suction cups on your windshield when using this type of car mount? I feel like with all of that weight on it, the suction wouldn't hold very well, especially in hot weather...
Using this one on 3 cars.
http://www.amazon.com/Mountek-nGroo...e=UTF8&qid=1374163360&sr=8-1&keywords=mountek
Here's my mini review of the Scosche Power Mount:
I've always been a very picky user when it comes to car mounts. I generally hate the suction mount style because I think it'll fall off over time or the windshield glass is too far for my practical hand reach. I also hate the vent mounting system because... well... I want AC air flow. Then there's the cup holder mount... I like to use them for my actual drinks. Then there's the sticky pad mount... which I think gets dirty and loses its sticky pad property and that the dash is far from my reach.(I drive an SUV) So that leaves me with the cigarette lighter ports mount type, which has its own set of problems... Often times the mounting plug is round... so it will "spin slip" and sag your phone when set at an angle. Or that the plug offers such limited functionalities. So you can see my rationale in my picky-ness... lol
Then there's the flexible arm issue... sometimes the flexible arm is cheaply made and is too weak. The arm is too long/short/missing arm.
And... the holder cradle is bulky, non adjustable, no padding for phone, etc.....
But I have found this and am quite satisfied with it:
http://www.scosche.com/mounts/powermount-power-socket-mount-for-portable-devices
Let's go down my concerns and see how it addresses it.
- Plug has a triangular shape to help brace it against something to prevent "spin slip".
- Plug has 2 USB outputs PLUS the pass through cigarette lighter port. My friend can charge even if they bring their own fatty cigarette lighter plug charger.
- The flexible arm is made of tough bendable metal material and has the right length so the toughness can actually support the weight of the extended arm.
- The arm length is there but not super long. It's enough to extend phone to places around the dash from mounting port. I had to still crunch mine up (S curve) to fit because I didn't want it too far from the plug.
- The mounting cradle is a treat! It has a cool spring loaded mechanism to accommodate wide and narrow devices with click locking so it's actually secured.(squeeze in cradle arm to tighten on clicks. Push button in back to release and widen cradle arm.) The foam in the arms create the perfect soft squeeze to prevent slip. Well padded in all regions where your phone would come in contact with the cradle. It can spin 360 on a pre-determined clicks for portrait or landscape mounting. There are actually two little swivel "feet" that can either be hidden flush for landscape mode or extend to support phone when in portrait mode. (Tiny swivel feet are also soft padded!) The cradle is minimal in obstruction, so the common placements of ports on different phones are fully accessible.
I drive an Acura RDX so its a stiff ride and can feel the bumps of the road, which generally causes dangling items in the car such as the extended arm of a car mount to shake and rattle. I'm happy to say that I don't experience shakes on the car mount! Unless, of course, when I drive over large pot holes or go at high speed over speed bumps, which I would be more concerned about other things than my phone shaking in such instances. However, do note that my mounting arm is crunched up in an S shape and is not exactly dangling out like a fully extended mounting arm, so the shaking effect may have been reduced.
There are some drawbacks to this product though. (not everything is perfect)
- The USB ports only charge at 500mA per port, so it might be a tad low for some. However, in practical use, I find that it is enough to overcome the power drain of when I use Navigation and screen on all the time. So when I get out of the car, my phone had increased in charge %.
- It doesn't come with any cable, so you'll have to use your own. I find that the retractable cables work best for length adjustments.
I've been using this for over a year now. I used an iPhone 4 with it and now I'm using my Galaxy S4 with it.
I also bought one for my nephew as he had been complaining about his vent mounting cradle. He's very happy with it!
PS. I'm not in anyway affiliated with Scosche or benefit from advertising for them. I just feel that my search for a perfect car mount can satisfactory end with this device and I thought the OP of this post (or anyone in search of a car mount) could reap from the fruits of my... labor. lol
sprint_dobbs said:
http://www.youtube.com/watch?v=lDgsHlY91mM&feature=share&list=UUYfRasme5t_BiD7RmX-JG5w
Click to expand...
Click to collapse
Is that Lime Creek Road?
Don't have pictures right now but the basic Samsung car mount kit works really well. The mount is pretty sturdy and the phone is held very securely. No annoying shaking of the phone while you drive. Comes with a car charger overall pretty solid piece.
Sent from my SGH-I337 using xda premium
CZ Eddie said:
Is that Lime Creek Road?
Click to expand...
Click to collapse
haha.. the road that goes to the Oasis(not sure of the name still kind of new to austin) then pulling on to 620.
dust. said:
How effective are the suction cups on your windshield when using this type of car mount? I feel like with all of that weight on it, the suction wouldn't hold very well, especially in hot weather...
Click to expand...
Click to collapse
Its never fallen off!
sprint_dobbs said:
haha.. the road that goes to the Oasis(not sure of the name still kind of new to austin) then pulling on to 620.
Click to expand...
Click to collapse
Yeah okay. I love those twisty roads down by the lake there.
Welcome to Austin! Please keep it weird. :good:
Just got my iottie xl in the mail today from amazon. Has an amazing grip and can put it in the dock and take it out with one hand. Very nice and study. (I have a commuter on it btw)
Sent from my SCH-I545 using Tapatalk 2
Here's what I did. I have used it with my Streak, Note, and S4 now. Anxiously waiting for an Otterbox to become available for the Active, but in the meantime maybe this will help. It is not the cheapest solution, but being universal, I've used it with 3 phones now over the course of something like 4 years. I no longer need to buy a new mount each time a new phone comes out. I have one in each Jeep, and none of the phones have never fallen out of them, and it is a very solid mount (almost no vibration). Some Jeeps I use a windshield suction cup mount, and some the Proclip as shown here.
The parts I used on this particular one are the following:
http://www.rammount.com/CatalogResu...rtid/082065077045066045050048050/Default.aspx
http://www.rammount.com/CatalogResu...65077045066045050048049085045065/Default.aspx
http://www.rammount.com/CatalogResu...77045072079076045085078056066085/Default.aspx
http://www.proclipusa.com/dashboard...7-2001/proclip-center-mount-852459-13093.cmsv
On the ones with the windshield suction cup I use a longer arm
http://www.rammount.com/CatalogResu...d/082065077045066045050048049085/Default.aspx
And of course the suction cup mount instead of the AMP screw down base and Proclip
http://www.rammount.com/CatalogResu...82065077045066045050050052045049/Default.aspx
I modified the X-Grip by removing the rubber pads, cutting off the original bent arms, and then bending new ones slightly further in, then painting and reinstalling the rubber phone holding pads. When I started down this path, RAM didn't have an X-Grip that fit the Streak or the Note in an Otterbox Commuter or similar. The smaller phone X-Grip might work with the S4, but I don't know. I know that this works, and works well. Hope that helps.
CZ Eddie said:
Yeah okay. I love those twisty roads down by the lake there.
Welcome to Austin! Please keep it weird. :good:
Click to expand...
Click to collapse
AUSTIN!! Fellow Texan.
Hey guys and gals,
I am looking to purchase a Car Qi Charger. I have not yet found a thread for this, though there were options mentioned in the regular Qi Charger thread, but this one is specifically for the car.
I have found 2 which look promising but just want to know other peoples input. Plus want to know if they will hold with a case on the phone.
Itian: http://www.amazon.com/dp/B00M685JTG/
C1: http://www.amazon.com/dp/B00H1XU6A8/
Both of these look pretty good, have mixed reviews, but just want to know what you guys think would be best and if anyone actually used these in the past?
I know that there is also the AirDock, but I doubt it would hold the Note 4 all that well, so not bothering to include it.
I currently use this item in my car as a regular holder, so I wish there was one (other than the AirDock) which can utilize the ability to hold and charge the phone by mounting into the CD Slot of the car head unit: http://www.amazon.com/dp/B004G1L52Q/
Please add to this list if anyone has better solutions.
I've been agonizing over this choice myself, but I'm even worse off than you- I've gotten hooked on having a magnetic mount (currently using the Bracketron Si earth elements mount), and I REALLY like the S-View cover, so what I really want is a car dock that does Qi charging AND holds the phone magnetically, with strong enough magnets to hold through the S-View flap! Unfortunately, it seems that at this point there aren't ANY magnetic Qi docks (apart from the Airdock, and I'm right on the same page as you there), let alone one that would work through the S-View flap! So basically if I want Qi I'm stuck either sacrificing the magnetic holding feature and going with arms, or I'll have to build my own custom dock. Haven't quite decided which route I'll go yet, but man do I wish there was a decent magnetic Qi dock!
Anyway, as for Qi docks that DO exist now, in my research I've found a couple that seem to really stand out and come up time and again as the go-to's for Qi in the car. Here's the best options I've seen so far:
The iOttie: http://www.iottie.com/Product/Detai...for Google Nexus 5 and Qi Enabled Smartphones
Amazon's got this one for $55 also: http://www.amazon.com/iOttie-Wireless-Standard-Motorola-Smartphones/dp/B00IRHQZTI
Nokia CR-201: http://www.mobilefun.com/38310-nokia-qi-wireless-charging-nfc-car-holder-cr-201-Reviews.htm
bit more expensive, but has some nice features.
Then there's this:http://www.tylt.com/vu-car-wireless-charger/
Not available yet, but it looks like it may be a decent option.
I've read a lot of mixed reviews on the plethora of non-name brand Qi gear thats out there, some people say that they work just as well for cheaper prices and others say that they're total junk. I guess I'd say if you see one you really like then just make sure that you read reviews on it so you don't get stuck with something that doesn't work or worse.
As for a mount that uses the CD slot, I haven't seen any Qi docks that come with that option but many docks share similar or identical mounting solutions, so once you find a Qi dock that you like you could probably find a non-qi dock that mounts in the CD slot and then just replace the actual dock with the Qi one. Personally I don't think I'd trust the CD slot to hold up a phone this heavy, I'd be worried about damaging the CD player not to mention it'll be much less steady, but hey if that's what you like then good luck!
Thanks for the input
I will have to look into the Ottie one as it does look fairly decent. The Nokia one is way over priced and I cannot say I am a fan of it. The Tylt is nice, but I am sure it is going to be quite costly due to their original designs of their products.
The reason I want it as a CD mount is because I currently have one (minus the Qi of course) and it works just fine, hold the phone super good, without issues at all what so ever. Plus, no damage done to the head unit or CD Slot (not that I use CDs of course lol).
I just want something very low profile, but for it to do the job you know. The reason why I do not want anything mounted on the windshield is because I hate wires and I like for the phone to be close to me while I drive. I do not text and drive though! I plan to run the wire behind my head unit and bring out just enough to plug into the Qi holder. This will be a pain in the rear of course, but I am anal when it comes to wires lol. I have a radar, dash cam, and soon a Qi charger, all of which I want to make fairly invisible with regards to wires.
soul777toast said:
I've been agonizing over this choice myself, but I'm even worse off than you- I've gotten hooked on having a magnetic mount (currently using the Bracketron Si earth elements mount), and I REALLY like the S-View cover, so what I really want is a car dock that does Qi charging AND holds the phone magnetically, with strong enough magnets to hold through the S-View flap! Unfortunately, it seems that at this point there aren't ANY magnetic Qi docks (apart from the Airdock, and I'm right on the same page as you there), let alone one that would work through the S-View flap! So basically if I want Qi I'm stuck either sacrificing the magnetic holding feature and going with arms, or I'll have to build my own custom dock. Haven't quite decided which route I'll go yet, but man do I wish there was a decent magnetic Qi dock!
Anyway, as for Qi docks that DO exist now, in my research I've found a couple that seem to really stand out and come up time and again as the go-to's for Qi in the car. Here's the best options I've seen so far:
The iOttie: http://www.iottie.com/Product/Detai...for Google Nexus 5 and Qi Enabled Smartphones
Amazon's got this one for $55 also: http://www.amazon.com/iOttie-Wireless-Standard-Motorola-Smartphones/dp/B00IRHQZTI
Nokia CR-201: http://www.mobilefun.com/38310-nokia-qi-wireless-charging-nfc-car-holder-cr-201-Reviews.htm
bit more expensive, but has some nice features.
Then there's this:http://www.tylt.com/vu-car-wireless-charger/
Not available yet, but it looks like it may be a decent option.
I've read a lot of mixed reviews on the plethora of non-name brand Qi gear thats out there, some people say that they work just as well for cheaper prices and others say that they're total junk. I guess I'd say if you see one you really like then just make sure that you read reviews on it so you don't get stuck with something that doesn't work or worse.
As for a mount that uses the CD slot, I haven't seen any Qi docks that come with that option but many docks share similar or identical mounting solutions, so once you find a Qi dock that you like you could probably find a non-qi dock that mounts in the CD slot and then just replace the actual dock with the Qi one. Personally I don't think I'd trust the CD slot to hold up a phone this heavy, I'd be worried about damaging the CD player not to mention it'll be much less steady, but hey if that's what you like then good luck!
Click to expand...
Click to collapse
I found one on sale (non brand name though)
http://www.aliexpress.com/item/QI-W...a-Lumia-920-820-Free-shipping/2041086689.html
and another
http://www.aliexpress.com/item/New-...S3-S4-Note2-Nexus-Nokia-Lumia/1795791846.html
I use this one:
http://smile.amazon.com/gp/product/B00FC0NBI6/
I used it for my S3, and it does fit a Note 4 with the Ringke Fusion case on it with a little room to spare. I haven't used it for Wireless Charging on my Note 4 yet because I'm still waiting for my wireless receiver to arrive, but it has worked perfectly on my S3 for the last 6 months.
It doesn't go in a CD slot, but it does offer both the suction cup and the air vent hooks.
elite-fusion said:
I will have to look into the Ottie one as it does look fairly decent. The Nokia one is way over priced and I cannot say I am a fan of it. The Tylt is nice, but I am sure it is going to be quite costly due to their original designs of their products.
The reason I want it as a CD mount is because I currently have one (minus the Qi of course) and it works just fine, hold the phone super good, without issues at all what so ever. Plus, no damage done to the head unit or CD Slot (not that I use CDs of course lol)..
Click to expand...
Click to collapse
Keep in mind that none of the chargers that people listed here except for the Itian have the One Touch operation. Paradoxically that includes the iOttie charger (people who invented it). So to me they all seem ridiculously overpriced for the limited functionality they provide. I am using Itian, and so far pretty happy with it. If you really need some sort of specific mount (CD, Vent, or whatever), you may be able to take Itian head (it's detachable) and glue it to the mount that you like. I had to do that myself because by dash has rough texture and the only suction cup that would stick is iOttie gel cap. So I used a suction cup plus arm form a low end iOttie charger ($13.99 on sale) and Itian head ($27.99). Cheaper and more functional than name brands.
railshot said:
Keep in mind that none of the chargers that people listed here except for the Itian have the One Touch operation. Paradoxically that includes the iOttie charger (people who invented it). So to me they all seem ridiculously overpriced for the limited functionality they provide. I am using Itian, and so far pretty happy with it. If you really need some sort of specific mount (CD, Vent, or whatever), you may be able to take Itian head (it's detachable) and glue it to the mount that you like. I had to do that myself because by dash has rough texture and the only suction cup that would stick is iOttie gel cap. So I used a suction cup plus arm form a low end iOttie charger ($13.99 on sale) and Itian head ($27.99). Cheaper and more functional than name brands.
Click to expand...
Click to collapse
Thanks for the input
I actually ordered the C1 yesterday, but ordered it from AliExpress for $34 and should hopefully be here in about a week or so.
I will report back. I am wondering about purchasing the Itian though and seeing which one is actually better, but not sure yet.
I used AirDock with my LG G3. It should work with note4 also. Got nothing bad to say about that dock!
theairdock dot com
loonyone said:
I use this one:
http://smile.amazon.com/gp/product/B00FC0NBI6/
I used it for my S3, and it does fit a Note 4 with the Ringke Fusion case on it with a little room to spare. I haven't used it for Wireless Charging on my Note 4 yet because I'm still waiting for my wireless receiver to arrive, but it has worked perfectly on my S3 for the last 6 months.
It doesn't go in a CD slot, but it does offer both the suction cup and the air vent hooks.
Click to expand...
Click to collapse
Disregard my earlier suggestion. Now that I finally have a Qi Receiver sticker for my Note 4, I'm finding that this one doesn't charge because the receiver isn't centered in the phone. I did cut up my receiver and turn the coil as close to the center as possible (careful not to cut the actual wires!), but it still doesn't charge for more than 2 seconds before the charging indicator turns off on the phone.
I ordered this one as a replacement and it's working great:
http://smile.amazon.com/gp/product/B00F5XPCSC/
Caveat: I don't know if it would work with the receiver sticker still in it's original configuration... :/ If I had to guess, I'd say it would because I can slide my phone to either side a little bit and I don't lose connection.
I had it with my Note 3. With the Note 4, I upgraded the car charger to a QC 2.0 charger and my car charging need is solved. It charges way faster than the best Qi charger that I've tried.
elite-fusion said:
Hey guys and gals,
I am looking to purchase a Car Qi Charger. I have not yet found a thread for this, though there were options mentioned in the regular Qi Charger thread, but this one is specifically for the car.
I have found 2 which look promising but just want to know other peoples input. Plus want to know if they will hold with a case on the phone.
Itian: http://www.amazon.com/dp/B00M685JTG/
C1: http://www.amazon.com/dp/B00H1XU6A8/
Both of these look pretty good, have mixed reviews, but just want to know what you guys think would be best and if anyone actually used these in the past?
I know that there is also the AirDock, but I doubt it would hold the Note 4 all that well, so not bothering to include it.
I currently use this item in my car as a regular holder, so I wish there was one (other than the AirDock) which can utilize the ability to hold and charge the phone by mounting into the CD Slot of the car head unit: http://www.amazon.com/dp/B004G1L52Q/
Please add to this list if anyone has better solutions.
Click to expand...
Click to collapse
Have the air dock with the goose neck mount. It was garbage and then I saw that they have the magnetic stickers. I attach the magnetic sticker to the back of the case I have the tough armor case. Now it is absolutely amazing I can't imagine anything better anyone looking for charger
gingi999 said:
Have the air dock with the goose neck mount. It was garbage and then I saw that they have the magnetic stickers. I attach the magnetic sticker to the back of the case I have the tough armor case. Now it is absolutely amazing I can't imagine anything better anyone looking for charger
Click to expand...
Click to collapse
Can someone with the AirDock comment on the strength of the magnet? I've been pretty interested in it, but the problem for me is that I really like the S-View case, so the magnet in the AirDock would need to be strong enough to hold through the S-View flap. Maybe someone could test how well it holds with a piece of cardboard or something between the AirDock and the phone? I've totally gotten addicted to having a magnetic dock, but I also love my S-View and I want wireless charging! I mean cmon, can't I have everything???
soul777toast said:
Can someone with the AirDock comment on the strength of the magnet? I've been pretty interested in it, but the problem for me is that I really like the S-View case, so the magnet in the AirDock would need to be strong enough to hold through the S-View flap. Maybe someone could test how well it holds with a piece of cardboard or something between the AirDock and the phone? I've totally gotten addicted to having a magnetic dock, but I also love my S-View and I want wireless charging! I mean cmon, can't I have everything???
Click to expand...
Click to collapse
Just use these, its what I do and it works amazing
Right, I would assume I'd need to use the sticker but what I'm wondering is whether the AirDock will hold the phone with the S-View cover flipped around to the back. Basically the sticker would be on the back of the phone, then the S-View cover would be between the sticker and the AirDock. Are the magnets in the AirDock strong enough to hold the phone even with the cover between them and the sticker?
soul777toast said:
Can someone with the AirDock comment on the strength of the magnet? I've been pretty interested in it, but the problem for me is that I really like the S-View case, so the magnet in the AirDock would need to be strong enough to hold through the S-View flap. Maybe someone could test how well it holds with a piece of cardboard or something between the AirDock and the phone? I've totally gotten addicted to having a magnetic dock, but I also love my S-View and I want wireless charging! I mean cmon, can't I have everything???
Click to expand...
Click to collapse
The nexus 5 has 4 metal discs in it specifically to make magnetic docks easy and allow for some self aligning.
The airdock with the nexus 5 works reasonable well. Not perfect, I do have to realign the phone more than once per day and end up grabbing or holding if if there's a big dip/bump/whatever.
However even with a thin case the n5 is unusable with the air dock. What's worse is that the airdock + note 4 is worse than the airdock + n5. I'm guessing the note 4 doesn't have the 4 discs.
I have an airdock and it works great with the Note 4.
i use an itian charger and it works great with double sided scotch tape for outdoor mounting. sticks vertically to the dash and holds the note 4 with two prongs.
While shopping for cars, I found out the camry and Avalon can come with wireless charging. I ended up with an Avalon Hybrid with tech pkg.
I'm not happy with this one - lost allways the connection - looking now one with three coils like my Itian desk charger, this one works perfect....
loonyone said:
I use this one:
http://smile.amazon.com/gp/product/B00FC0NBI6/
I used it for my S3, and it does fit a Note 4 with the Ringke Fusion case on it with a little room to spare. I haven't used it for Wireless Charging on my Note 4 yet because I'm still waiting for my wireless receiver to arrive, but it has worked perfectly on my S3 for the last 6 months.
It doesn't go in a CD slot, but it does offer both the suction cup and the air vent hooks.
Click to expand...
Click to collapse
I like the iOttie...
Hi All,
I ordered my Note 9 512gb a little while back and have a few more weeks to wait. While I'm waiting I'm getting all the stuff I think I want to have with it. One of those things is a wireless charging car dock. There are too many out there to really know which is best so I thought I would ask the people that already have the note9 and possibly are already using a wireless car dock. Thanks!
I'm interested too. I'm searching for one usable with the clear view cover. Magnetic one would be great but I'm scared by the metallic ring and Qi interferences. I'm thinking of building my own based on the magnet already in the cover...
Nobody has a pony in this race?
I went with Choetech one for my other car because it has a USB C inout for power. Works good, about the same as the iottie one touch except not as convenient.
Sent from my SM-N960U using Tapatalk
gottria said:
I went with Choetech one for my other car because it has a USB C inout for power. Works good, about the same as the iottie one touch except not as convenient.
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
Thanks Gottria, I'll look into it :good:
I like the Choetech charger but 2 things bug me. The arms are slightly curved inwards toward the end and when the phone sits in the cradle all the way back the tips of the arms slightly block the screen. And forget about accessing the side edge function. 2nd is the mount, it doesn't use the 17mm ball and it's reversed compared to other mounts. The socket needs to be on the back of the device instead of the ball.
Sent from my SM-N960U using Tapatalk
gottria said:
I like the Choetech charger but 2 things bug me. The arms are slightly curved inwards toward the end and when the phone sits in the craddle all the way back the tips of the arms slightly block the screen. And forget about accessing the side edge function. 2nd is the mount, it doesn't use the 17mm ball and it's reversed compared to other mounts. The socked needs to be on the back of the device instead of the ball.
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
Thanks gottria. I use a panavise mount in my C63 and have a 17mm ball to hook the dock onto. This would've completely screwed up my setup :highfive:
I've just bought the choetech fast wireless charger mount. I have a Vauxhall vivaro and theres no good way to mount it so its on the windscreen towards the top with a USB trailing down to the quick charge 12v plug I use. I can see it being a pain but doesn't really block my view. I prefer air vent mounts had a baseus wireless charger but didn't even charge the phone. Compared to the choetech its much more cheapy and flimsy the choetech feels solid. Which is good but if anyone can advice a way I Can get a air vent mount to hold it to that then would prefer it.
My main worry about the choetech is with cold freezing weather coming in and frozen windscreens how well will it actually hold up as dont want my £1000 phone dropping and smashing. :fingers-crossed:
Idrogn said:
I'm interested too. I'm searching for one usable with the clear view cover. Magnetic one would be great but I'm scared by the metallic ring and Qi interferences. I'm thinking of building my own based on the magnet already in the cover...
Click to expand...
Click to collapse
If you find a solution, let me know. I too am struggling to find one that works with the clear view cover
I have to say that when it comes to car mounts period, the folks at EXOGEAR are the best from my experience over the years. I've used their tablet and smartphone mounts. These mofos stick to practically any surface. Couple that with the way the phone snaps in and out of the mounts? It's so quick and easy.
But now I'm learning these guys make wireless chargers for their mounts. It says it goes "up to" 9v so I'm curious how fast it actually charges the N9.
Since it's EXOGEAR and I swear by their suction cup performance I'm going to buy it soon as it comes available and I'll check back later and let y'all know how it worked out. I honestly never felt the need to have a wireless charger in my car because I typically have plenty of battery life by the time I get home but this wireless charger peaked my interest.
https://exogear.com/product/exomount-qi/
I purchased the iOttie and loved it enough to purchase a second one for my wifes car. I havent found a single suction cup that would work with my leather in the car so I purchased a panavise mount and 17mm ball adapter to mount it. But while waiting for those to arrive I tested the suction cup and it holds... amazingly. The mount hasn't shifted in the slightest and I have launched the car from a dead stop a few times trying to get it to shake lose. I can feel my body violently being forced back into the seat but the mount doesn't look fazed. First time I can actual praise a suction cup mounting system.
Also I thought I should add that "Fast Charging" is displayed when the phone is docked.
I'm using the Baseus Qi Wireless Magnetic Fast Charger and it's pretty good. The only downside is if you have stiff car suspension (like in sports car) and get into a big bump, the phone can lose grip and fall.
https://m.aliexpress.com/item/32836...l&spm=2114.12010612.8148356.49.9226935c3ACvcY
Since my car already has a navigation screen I don't need the phone up in the vent area. Besides I didn't like any of the in vent holders. The magnetic phone holders out there I don't like since if i hit a bump or pothole the phone will fall due to its weight. There is a coin slot holder in my care but the wireless ones usually have a base that won't fit in that holder. But I then found a wood wireless charger a while back that had a metal base which is removable. I placed it in the coin holder and it charges my then Note 8, now Note 9 even with a case. Granted it is not a fast charge type of wireless charger but it does charge my phones quickly enough on the half hour of driving from work to home. So it does the job enough for me, looks great and I don't have to worry about the phone falling off a magnet or blocking the vent.
Got this charger for £12.99 on Amazon:
mod edit - link removed
Feels cheap and looks cheap but it works and does the job well enough. It's foldable too, so you can use it either horizontal or vertical.
Worth it, if you need to buy a cheap one to leave at the office.
Would be great if wireless charger can work even with a metal piece on the back of casing for magnetic car phone holder
speed8081 said:
Would be great if wireless charger can work even with a metal piece on the back of casing for magnetic car phone holder
Click to expand...
Click to collapse
There are magnetic holders that claim to work without blocking the wireless charger. They use a metal piece shaped like an upside down "U" instead of a square one. Given all the warnings against mixing credit cards and metal on cases and what not with wireless charging, I'd be weary of trying it out myself on my own phone, but they do exist. Just search for wireless charging compatible magnetic mount, I'm sure some will turn out.
Could be that I'm missing something (perhaps even a crucial factor), but why couldn't you use a wireless charger at the same time you have a metal plate in your case? It can't be harmful to the phone right?
I have a strong enough carkit so I can use a relatively small circular piece of metal in my slim fit case for the Note 9, works a charm. I've tested the location in the case, so I can use this in my car and still be able to put it down on a wireless charger so it charges without a problem. Okay, so when I put my phone on the charger pad a bit to far down or up, it doesn't charge, but that's just a matter of trying which position is best and this will become a non-issue the more you use it (since you know exactly how to put it on the charging pad).
Please enlighten me whether or not it could be harmful in any way to the phone because I don't want to risk a $1250 phone for the convenience of charging wirelessly. But I haven't ran into trouble this way just yet. Been doing this also with my Galaxy S8 for over a year btw, it still works like new.
Btw, @OP, can you share a link to the charger?
bramgg said:
Could be that I'm missing something (perhaps even a crucial factor), but why couldn't you use a wireless charger at the same time you have a metal plate in your case? It can't be harmful to the phone right?
I have a strong enough carkit so I can use a relatively small circular piece of metal in my slim fit case for the Note 9, works a charm. I've tested the location in the case, so I can use this in my car and still be able to put it down on a wireless charger so it charges without a problem. Okay, so when I put my phone on the charger pad a bit to far down or up, it doesn't charge, but that's just a matter of trying which position is best and this will become a non-issue the more you use it (since you know exactly how to put it on the charging pad).
Please enlighten me whether or not it could be harmful in any way to the phone because I don't want to risk a $1250 phone for the convenience of charging wirelessly. But I haven't ran into trouble this way just yet. Been doing this also with my Galaxy S8 for over a year btw, it still works like new.
Btw, @OP, can you share a link to the charger?
Click to expand...
Click to collapse
I put a link to charger on the video description.
I just bought this one: https://www.amazon.com/dp/B07C5KCQQ4/
Fast charges a little slower than directly plugging the Samsung charger into the phone (as expected).
The hinge is a tight friction fit, so the angle is adjusted wherever you like.