Related
I was on Maximus HD 10.0
Then i tried another rom. but i don't like, so i downloaded 10.2 latest nightly but it on my internal storage-->full wipe-->and then i can't install cm10.2 then i want to but another rom on my internal storage but i can't put anything on the phone without an running rom...
then i changed my recovery to CWM 6. cause i knower there was an option to mount usb storage, but it don't work nothings happened when i click on it. Pleas help me i can do nothing
Some more Infos:C:\test>fastboot getvar all
version: 0.5
version-bootloader: 2.16.0000
version-baseband: 1.20.50.05.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: *************
imei: **************
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: 11111111
battery-status: good
battery-voltage: 4128mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4958290506
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.078s
Jojo1992 said:
I was on Maximus HD 10.0
Then i tried another rom. but i don't like, so i downloaded 10.2 latest nightly but it on my internal storage-->full wipe-->and then i can't install cm10.2 then i want to but another rom on my internal storage but i can't put anything on the phone without an running rom...
then i changed my recovery to CWM 6. cause i knower there was an option to mount usb storage, but it don't work nothings happened when i click on it. Pleas help me i can do nothing
Some more Infos:C:\test>fastboot getvar all
version: 0.5
version-bootloader: 2.16.0000
version-baseband: 1.20.50.05.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: SH26RW404047
imei: 359901049107937
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: 11111111
battery-status: good
battery-voltage: 4128mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4958290506
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.078s
Click to expand...
Click to collapse
I hope this Infos can help to solve my Problem, i have access via Fastboot!
The best would be if i can go back to stock.
Jojo1992 said:
I hope this Infos can help to solve my Problem, i have access via Fastboot!
The best would be if i can go back to stock.
Click to expand...
Click to collapse
You need the old firmware like you had before you updated to Maximus.
Run a RUU.exe and clear storage/factory reset in bootloader when you have the stock recovery back on.
From your other thread I posted more details
http://forum.xda-developers.com/showpost.php?p=47586067&postcount=7
tivofool said:
You need the old firmware like you had before you updated to Maximus.
Run a RUU.exe and clear storage/factory reset in bootloader when you have the stock recovery back on.
From your other thread I posted more details
http://forum.xda-developers.com/showpost.php?p=47586067&postcount=7
Click to expand...
Click to collapse
i downloaded an RUU:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
then i make this:
fastboot devices
fastboot oem lock
then start RUU, but error no connection to device but in cmd i get a connection
I have a CID 111111 is that the Problem?
Jojo1992 said:
I have a CID 111111 is that the Problem?
Click to expand...
Click to collapse
I've never changed my CID, no need to. So I'm not an expert.
But from what I have read here:
"You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid. "
So, not a problem, unless you install a OTA (over the air) update while SuperCid.
Here's a good guide from another forum
http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html
Glancing at that, I noticed it recommends running the RUU on the PC as administrator, maybe it's something simple like that.
tivofool said:
I've never changed my CID, no need to. So I'm not an expert.
But from what I have read here:
"You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid. "
So, not a problem, unless you install a OTA (over the air) update while SuperCid.
Here's a good guide from another forum
http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html
Glancing at that, I noticed it recommends running the RUU on the PC as administrator, maybe it's something simple like that.
Click to expand...
Click to collapse
I changed my CID back to HTC__102
and tried zwo different RUU.exe one ICS on JB but both have an error...
i relocked my boot loader how can i unlock again?
Jojo1992 said:
I changed my CID back to HTC__102
and tried zwo different RUU.exe one ICS on JB but both have an error...
i relocked my boot loader how can i unlock again?
Click to expand...
Click to collapse
When trying the RUU did you go to bootloader (fastboot USB)?
To Unlock
Locate your Unlock_code.bin on your pc, probably saved it somewhere or it is still in your fastboot folder.
Type this into your command prompt window fastboot flash unlocktoken Unlock_code.bin
or go through the process of getting a new one http://forum.xda-developers.com/showthread.php?t=1583427
Nice tool (Windroid)
http://forum.xda-developers.com/showthread.php?t=2471151
tivofool said:
When trying the RUU did you go to bootloader (fastboot USB)?
To Unlock
Locate your Unlock_code.bin on your pc, probably saved it somewhere or it is still in your fastboot folder.
Type this into your command prompt window fastboot flash unlocktoken Unlock_code.bin
or go through the process of getting a new one http://forum.xda-developers.com/showthread.php?t=1583427
Nice tool (Windroid)
http://forum.xda-developers.com/showthread.php?t=2471151
Click to expand...
Click to collapse
Yes I was in fast boot USB
I will try it one time again and when it don't work then unlock again
Jojo1992 said:
Yes I was in fast boot USB
I will try it one time again and when it don't work then unlock again
Click to expand...
Click to collapse
Oh yeah, I've also read from someone that they got error 155 then they flashed stock recovery and relocked bootloader and then RUU proceeded to work.
tivofool said:
Oh yeah, I've also read from someone that they got error 155 then they flashed stock recovery and relocked bootloader and then RUU proceeded to work.
Click to expand...
Click to collapse
I unlocked and now i could flash:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
that worked for me.
So which is the latest CM what i could install now?
Hboot: 1.14.0002
UNLOCKED
S-OFF
Running:
Android 4.0.4 HTC Sense4.1 Softwarenumber:2.31.401.5
Jojo1992 said:
I unlocked and now i could flash:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
that worked for me.
So which is the latest CM what i could install now?
Hboot: 1.14.0002
UNLOCKED
S-OFF
Running:
Android 4.0.4 HTC Sense4.1 Softwarenumber:2.31.401.5
Click to expand...
Click to collapse
Glad you were able to get the RUU working. But right now you won't be able to flash many ROMs with that low of a Hboot. You will need to update the firmware.
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
Or...this firmware update thread
http://forum.xda-developers.com/showthread.php?t=2322755
tivofool said:
Glad you were able to get the RUU working. But right now you won't be able to flash many ROMs with that low of a Hboot. You will need to update the firmware.
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
Or...this firmware update thread
http://forum.xda-developers.com/showthread.php?t=2322755
Click to expand...
Click to collapse
where can i find stock recovery?
flash it like this or?: fastboot flash recovery recover.img
and relock bootloader with: fastboot oem lock ???
Jojo1992 said:
where can i find stock recovery?
flash it like this or?: fastboot flash recovery recover.img
and relock bootloader with: fastboot oem lock ???
Click to expand...
Click to collapse
There is a stock recovery here
http://www.modaco.com/topic/353006-...ch-recovery-for-the-htc-one-s-stock-download/
The SECOND download is the stock one
Unless you change the name of the recovery the command will probably look more like this:
fastboot flash recovery ville_recovery_signed.img
And yes
fastboot oem lock
after you have flashed the stock recovery of course
tivofool said:
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
[/url]
Click to expand...
Click to collapse
Or he could just change cid to HTC__001 and flash jb ruu. (The European version)
Sent from HTC One S using android 4.2.2 sense 5
tominozh said:
Or he could just change cid to HTC__001 and flash jb ruu. (The European version)
Sent from HTC One S using android 4.2.2 sense 5
Click to expand...
Click to collapse
That don't work
I tried:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
I will try it over ota now --> my Handy ist loading the update 4.1.1 i will report as soon as it is ready
Ok edit:
Hboot 2.15.0000
Unlocked
can i now flash CM10.2?
O.T.: Is CM10.2 running stable?
Jojo1992 said:
That don't work
I tried:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
I will try it over ota now --> my Handy ist loading the update 4.1.1 i will report as soon as it is ready
Ok edit:
Hboot 2.15.0000
Unlocked
can i now flash CM10.2?
O.T.: Is CM10.2 running stable?
Click to expand...
Click to collapse
Eh.. It is stable besides for some bootlooping. Like you start it up and it bootloops a few times before finally loading. I like the Avatar Rom which is CM 10.2 based, and noticed a little bootlooping. But it wasn't terrible, just something that happened a few times.
So if that doesn't bother you, go for it. Other than that you would need to stick with sense based roms for stability.
Gosh, so many to choose from you will have to try some out.
http://forum.xda-developers.com/showthread.php?t=2243895
tivofool said:
Eh.. It is stable besides for some bootlooping. Like you start it up and it bootloops a few times before finally loading. I like the Avatar Rom which is CM 10.2 based, and noticed a little bootlooping. But it wasn't terrible, just something that happened a few times.
So if that doesn't bother you, go for it. Other than that you would need to stick with sense based roms for stability.
Gosh, so many to choose from you will have to try some out.
http://forum.xda-developers.com/showthread.php?t=2243895
Click to expand...
Click to collapse
Is the Avatar Rom really 10.2 based? cause on their page they tell 10.1 based or?
but i can install now any rom or?
with the flashed rue which i have actually i don't get mobile internet working. just wlan
Jojo1992 said:
Is the Avatar Rom really 10.2 based? cause on their page they tell 10.1 based or?
but i can install now any rom or?
with the flashed rue which i have actually i don't get mobile internet working. just wlan
Click to expand...
Click to collapse
Ya, guess you are right, 10.1
You can flash any as long as they don't require hboot 2.16 (which they state in the first page OP)
tivofool said:
Ya, guess you are right, 10.1
You can flash any as long as they don't require hboot 2.16 (which they state in the first page OP)
Click to expand...
Click to collapse
ok thank you very much for the help!
ok here's the thing..
i lost my backup for the stock rom which came with my HTC One XL,and i've been facing alot of issues with custom roms ,the major thing was the capacitive buttons stopped working without a reason !
now being S-ON,unable to go back to stock except with RUU's with the matching CID,,ok so i tried searching for the right RUU with matching CID which is J15 and the only one i found on androidRUU website didnt work for me as its a different hboot version (not sure if that's why it refused or not but thats what i understood from reading in the forums)
so i spent hours and hours trying to find the correct RUU with matching CID and hboot version but was invain,,
another option searching for NANDROID,,still didnt find any matching results
tried getting SuperCID to make it easier to find a matching RUU,,but i found in order to get SuperCID i need to be S-OFF,,and in order to get S-OFF i need to get SuperCID first...its a bit frustrating i know
also another weird thing that when i tried to relock the bootloader,it says "FAILED (status read failed (Too many links))"
so any help on how to either :
1.Full stock restore either with a matching RUU or NANDROID
2.Getting a full stock rom with the latest firmware update so that hopefully the capacitive buttons work again..
would be really appreciated
and here are my info :
version: 0.5
version-bootloader: 2.10.0000
version-baseband: 3.12.38.00.24
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
product: evita_utl
platform: HBOOT-8960
modelid: PJ8350000
cidnum: HTC__J15
battery-status: good
battery-voltage: 3848mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-b27b8968
hbootpreupdate: 11
gencheckpt: 0
lordofegypt said:
ok here's the thing..
i lost my backup for the stock rom which came with my HTC One XL,and i've been facing alot of issues with custom roms ,the major thing was the capacitive buttons stopped working without a reason !
now being S-ON,unable to go back to stock except with RUU's with the matching CID,,ok so i tried searching for the right RUU with matching CID which is J15 and the only one i found on androidRUU website didnt work for me as its a different hboot version (not sure if that's why it refused or not but thats what i understood from reading in the forums)
so i spent hours and hours trying to find the correct RUU with matching CID and hboot version but was invain,,
another option searching for NANDROID,,still didnt find any matching results
tried getting SuperCID to make it easier to find a matching RUU,,but i found in order to get SuperCID i need to be S-OFF,,and in order to get S-OFF i need to get SuperCID first...its a bit frustrating i know
also another weird thing that when i tried to relock the bootloader,it says "FAILED (status read failed (Too many links))"
so any help on how to either :
1.Full stock restore either with a matching RUU or NANDROID
2.Getting a full stock rom with the latest firmware update so that hopefully the capacitive buttons work again..
would be really appreciated
and here are my info :
version: 0.5
version-bootloader: 2.10.0000
version-baseband: 3.12.38.00.24
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: HT2CNW302531
imei: 354370050060697
product: evita_utl
platform: HBOOT-8960
modelid: PJ8350000
cidnum: HTC__J15
battery-status: good
battery-voltage: 3848mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-b27b8968
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Long story short, there is no RUU for your CID. But there is a thread in our General Section that contains stock backups for your device.
I'll also just clear up some confusion you seem to have about s-off and SuperCID. There are two s-off methods for the Evita, Facepalm and Rumrunner. Facepalm requires SuperCID to work, Rumrunner does not require SuperCID to work. If you don't have SuperCID and want it you can use the Rumrunner s-off method to get s-off and then change your CID using a fastboot command.
Either way, don't use any of the RUUs that match other CIDs, they'll most likely brick your phone. Just find the thread in General and you'll be able to download a nandroid backup.
Sent from my Evita
timmaaa said:
Long story short, there is no RUU for your CID. But there is a thread in our General Section that contains stock backups for your device.
I'll also just clear up some confusion you seem to have about s-off and SuperCID. There are two s-off methods for the Evita, Facepalm and Rumrunner. Facepalm requires SuperCID to work, Rumrunner does not require SuperCID to work. If you don't have SuperCID and want it you can use the Rumrunner s-off method to get s-off and then change your CID using a fastboot command.
Either way, don't use any of the RUUs that match other CIDs, they'll most likely brick your phone. Just find the thread in General and you'll be able to download a nandroid backup.
Sent from my Evita
Click to expand...
Click to collapse
and concerning that backup you're talking about,,does it have to be matching my CID or any of my details ? or just any backup is fine ?
The backup I'm talking about is specifically for the middle eastern variant of this phone.
Sent from my Evita
timmaaa said:
The backup I'm talking about is specifically for the middle eastern variant of this phone.
Sent from my Evita
Click to expand...
Click to collapse
thx for the help,,ok so currently i found the needed NANDROID,,made the restore and am back to stock android 4.1.1 with relocked bootloader and stock recovery flashed,,i tried searching for software updates and it says no updates found when my neighbor got the same device and he recieved an update for 4.2.2 ??
however am not quite sure if the stock recovery flashed successfully or not ,,in the fastboot it said that the flashing was successful but when i tried to access the recovery from the boot it just went blank screen ,,is that ok and am not supposed to enter the stock recovery but then why it doesnt make the update ? or there's something wrong with the recovery i got ?
You should be able to enter the stock recovery, I believe there's something wrong with the recovery you flashed.
Sent from my Evita
ngiyal 457
timmaaa said:
You should be able to enter the stock recovery, I believe there's something wrong with the recovery you flashed.
Sent from my Evita
Click to expand...
Click to collapse
ok i found the recovery ,flashed it and able to access the recovery nw,,but in order to do so i had to unlock the bootloader again other wise it will just keep on booting into the bootmode which is kinda wierd...
anyway you got any ideas why am unable to receive the OTA ?
I'm not sure why you're not receiving it, sorry. If you can find the OTA you can install it manually.
Sent from my Evita
timmaaa said:
I'm not sure why you're not receiving it, sorry. If you can find the OTA you can install it manually.
Sent from my Evita
Click to expand...
Click to collapse
surprisingly i just got an update for the "people" app through searching for software updates (not through playstore)...does that mean that my OTA is working fine and its just a delay or something like that for the full software,,or this app update has nothing to do with the OTA's ?
The people app itself is separate from the OTA.
Sent from my Evita
j15 version of evite doesn't recieve 4.2.2 update yet
i have the same of your phone and i flashed stock ROM of telstra and it works fine for me
madoooz said:
j15 version of evite doesn't recieve 4.2.2 update yet
i have the same of your phone and i flashed stock ROM of telstra and it works fine for me
Click to expand...
Click to collapse
Could I ask where you got that stock Rom and for a link as well. With a bit of help from lag I managed to factory reset and lose my backup just before I was going to get in on my pc, imagine my excitement. So this would be greatly appreciated.
Thank You
jnthnbgg said:
Could I ask where you got that stock Rom and for a link as well. With a bit of help from lag I managed to factory reset and lose my backup just before I was going to get in on my pc, imagine my excitement. So this would be greatly appreciated.
Thank You
Click to expand...
Click to collapse
Just have a look in our Android Development section, you'll find it in there, along with some great custom ROMs you might want to try.
Sent from my Evita
jnthnbgg said:
Could I ask where you got that stock Rom and for a link as well.
Click to expand...
Click to collapse
All the links you will likely ever need are here:
http://forum.xda-developers.com/showthread.php?t=1671237
jnthnbgg said:
With a bit of help from lag I managed to factory reset and lose my backup just before I was going to get in on my pc, imagine my excitement.
Click to expand...
Click to collapse
Did you factory reset in hboot and corrupt the SD? Because a factory reset in recovery or in the OS should not wipe the SD (including nandroids).
redpoint73 said:
All the links you will likely ever need are here:
http://forum.xda-developers.com/showthread.php?t=1671237
Did you factory reset in hboot and corrupt the SD? Because a factory reset in recovery or in the OS should not wipe the SD (including nandroids).
Click to expand...
Click to collapse
Yes it did it in Hboot of all things while I had Clean Rom installed which was giving me grief (blackscreen after HTC load screen)
jnthnbgg said:
Yes it did it in Hboot of all things while I had Clean Rom installed which was giving me grief (blackscreen after HTC load screen)
Click to expand...
Click to collapse
What are your bootloader details? I might be able to diagnose why you were having problems before the factory reset.
Sent from my Evita
timmaaa said:
What are your bootloader details? I might be able to diagnose why you were having problems before the factory reset.
Sent from my Evita
Click to expand...
Click to collapse
Well I know it is the S-On as I saw even though I was doing all according to the instructions I could find. I had Unlock, SU CID, just could not get that S-OFF. I tried it manually, via the toolkits people have out there, using a 2.0 USB cable. But without the S-OFF I did not get the firmware installed so that was my source of headache with that I just had a bit of lag in the bootloader screen and i click one to many times past recovery and viola up the crick without a canoe lol
Once you have a ROM installed, forget the toolkits and get s-off manually, it's really easy. There are two methods you can try:
Facepalm S-off
Rumrunner S-off
Sent from my Evita
timmaaa said:
Once you have a ROM installed, forget the toolkits and get s-off manually, it's really easy. There are two methods you can try:
Facepalm S-off
Rumrunner S-off
Sent from my Evita
Click to expand...
Click to collapse
So going the route of Palm as I can not get adb to connect but I can fastboot USB, The first attempt ends with FAILED remote:92 supercid! please flush image again immediately. The second attempt ends in FAILED remote:99 unknow fail
You're gonna need to get adb working, both methods require it. I'm in a good mood so I'm gonna give you the solution to the error 99 problem, but please in future search properly before posting, the solution to that problem has been posted dozens of times in the Facepalm thread.
When you get error 99 after flashing the zip, you need to force a reboot to the bootloader and start the process again and you should get error 92 again.
Why isn't adb working? What ROM are you on? Have you updated your drivers? Do you have usb debugging turned on in Developer Options?
Sent from my Evita
Hi everyone, i'm new at this forum and i have very strange problem with my HTC Sensation.
My friend bought this phone, everything was ok. He unlocked bootloader with HTCdev, flashed CWM and some CM10.1 ROM (and Gapps). Wifi and Bluetooth stopped working. In settings, the switches at wifi and bluetooth was gray. If i open wifi, there was something like "Turning on..." (bluetooth was the same).
Then he gave this phone to me. I wanted to solve this problem. I flashed many ROMs, for example this: http://forum.xda-developers.com/showthread.php?t=2530073 . I tried Wifix, not working. I flashed 4EXTRecovery and tried SmartFlash. I tried flash stock ICS ROM (about 400MB zip), still not working. Then i successful do S-OFF by Juopunut. I have HBOOT-1.27.1111, RADIO-11.25A-3504.13_M.
Please, can anyone help me? :crying:
PitnerT said:
Hi everyone, i'm new at this forum and i have very strange problem with my HTC Sensation.
My friend bought this phone, everything was ok. He unlocked bootloader with HTCdev, flashed CWM and some CM10.1 ROM (and Gapps). Wifi and Bluetooth stopped working. In settings, the switches at wifi and bluetooth was gray. If i open wifi, there was something like "Turning on..." (bluetooth was the same).
Then he gave this phone to me. I wanted to solve this problem. I flashed many ROMs, for example this: http://forum.xda-developers.com/showthread.php?t=2530073 . I tried Wifix, not working. I flashed 4EXTRecovery and tried SmartFlash. I tried flash stock ICS ROM (about 400MB zip), still not working. Then i successful do S-OFF by Juopunut. I have HBOOT-1.27.1111, RADIO-11.25A-3504.13_M.
Please, can anyone help me? :crying:
Click to expand...
Click to collapse
have you tried to re flash the rom with FULL WIPE??
Fakhri 19 said:
have you tried to re flash the rom with FULL WIPE??
Click to expand...
Click to collapse
Yea, i did full wipe everytime. Btw, now it's hard bricket, because i wanted to do completly stock restore and i tried S-ON... Can't power on, LED isn't isn't lighting when charging, can't open bootloader
PitnerT said:
Yea, i did full wipe everytime. Btw, now it's hard bricket, because i wanted to do completly stock restore and i tried S-ON... Can't power on, LED isn't isn't lighting when charging, can't open bootloader
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1522351
rzr86 said:
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
Yea, it didn't work at Ubuntu 8 32bit, but while ago i tried Ubuntu 13 64bit and i have back original HBOOT, its S-ON and LOCKED!!!
PitnerT said:
Yea, it didn't work at Ubuntu 8 32bit, but while ago i tried Ubuntu 13 64bit and i have back original HBOOT, its S-ON and LOCKED!!!
Click to expand...
Click to collapse
i am just curious
what exactly did you do and bricked the device?
rzr86 said:
i am just curious
what exactly did you do and bricked the device?
Click to expand...
Click to collapse
i wrote "fastboot oem writesecureflag 3"
Okay, so i am S-ON, LOCKED bootloader, Security Warning in HBOOT. I have no recovery in this moment. I want flash ION CM11 ROM.
So, how? Do HTCdev or just S-OFF? I will flash 4EXT Recovery... I want working wifi and bluetooth. Thank you
PitnerT said:
i wrote "fastboot oem writesecureflag 3"
Okay, so i am S-ON, LOCKED bootloader, Security Warning in HBOOT. I have no recovery in this moment. I want flash ION CM11 ROM.
So, how? Do HTCdev or just S-OFF? I will flash 4EXT Recovery... I want working wifi and bluetooth. Thank you
Click to expand...
Click to collapse
just to know
you are using this command only after using a ruu.exe and make sure that you have the official hboot version
now just go for S-OFF
rzr86 said:
just to know
you are using this command only after using a ruu.exe and make sure that you have the official hboot version
now just go for S-OFF
Click to expand...
Click to collapse
Thanks, i will S-OFF. Must i unlock bootloader by HTCDev after S-OFF? Or just flash recovery, ROM, Kernel, Gapps?
Okay, I did HTCdev Unlock (it was only way to flash something), then flashed 4EXT, then did S-OFF and flashed 3.32 Stock ROM. Wifi and BT still not working Please, any ideas?
PitnerT said:
Okay, I did HTCdev Unlock (it was only way to flash something), then flashed 4EXT, then did S-OFF and flashed 3.32 Stock ROM. Wifi and BT still not working Please, any ideas?
Click to expand...
Click to collapse
wipe dalvik + cache from recovery
by the way it is not the only way to flash something after S-OFF
after S-OFF you could flash from bootloader 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
it gives also a patched hboot which is unlocked
rzr86 said:
wipe dalvik + cache from recovery
by the way it is not the only way to flash something after S-OFF
after S-OFF you could flash from bootloader 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
it gives also a patched hboot which is unlocked
Click to expand...
Click to collapse
I always wipe everything... It was only way, without unlocked bootloader i can't do S-OFF :laugh: Yeah, i tried flash 3.33 firmware, than 3.33 ROM, but "Installation aborted (status 1)"
PitnerT said:
I always wipe everything... It was only way, without unlocked bootloader i can't do S-OFF :laugh: Yeah, i tried flash 3.33 firmware, than 3.33 ROM, but "Installation aborted (status 1)"
Click to expand...
Click to collapse
Installation aborted (status 1) from the rom or from the firmware zip?
when you used the ruu.exe to return back to stock did you check the wifi and bluetooth then?
try again flashing the boot.img of the rom via fastboot command
rzr86 said:
Installation aborted (status 1) from the rom or from the firmware zip?
when you used the ruu.exe to return back to stock did you check the wifi and bluetooth then?
try again flashing the boot.img of the rom via fastboot command
Click to expand...
Click to collapse
I didn't use ruu.exe, i flashed 3.33 ROM.zip via 4EXT. So i try some RUU 3.33...
PitnerT said:
I didn't use ruu.exe, i flashed 3.33 ROM.zip via 4EXT. So i try some RUU 3.33...
Click to expand...
Click to collapse
now it makes sense
that's why you bricked your device before
never use the writesecureflag command before using any ruu.exe
you should know that
note: no need to return to S-ON
just keep the S-OFF status
rzr86 said:
now it makes sense
that's why you bricked your device before
never use the writesecureflag command before using any ruu.exe
you should know that
note: no need to return to S-ON
just keep the S-OFF status
Click to expand...
Click to collapse
this will be ok? Official RUU-Pyramid-ICS-hTC-Europe-3.33.401.5 RUU-Pyramid-ICS-hTC-Europe-3.33.401.6-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-266171-signed.exe
Anyway, thanks
PitnerT said:
this will be ok? Official RUU-Pyramid-ICS-hTC-Europe-3.33.401.5 RUU-Pyramid-ICS-hTC-Europe-3.33.401.6-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-266171-signed.exe
Anyway, thanks
Click to expand...
Click to collapse
it is fine
rzr86 said:
it is fine
Click to expand...
Click to collapse
Okay, RUU said Error 113
PitnerT said:
Okay, RUU said Error 113
Click to expand...
Click to collapse
Fastboot getvar all
Hide imei and sn.
nlooooo said:
Fastboot getvar all
Hide imei and sn.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1111
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: xxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: T-MOB004
(bootloader) battery-status: good
(bootloader) battery-voltage: 4019mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.488s
I have a HTC One S cell phone that stopped working after I did a software update from the settings menu. The phone has no service (not able to connect to the network). My service provider is Wind mobile. They tried a "hard reset" or factory data reset this did not solve the problem. Then I had a technician replace the firmware and downgrade to an earlier version of software. This got the phone to work. I was able to make one call. However I was unable to pickup wifi. I tried to turn on wifi in the setting menu and then the phone stopped working again. I have tried talking to HTC customer service but they have not been able (or willing) to help.
HTC One S
model Z520m, Android
HBOOT- 2.15.0000
RADIO - 1.11.50.05.28
Open DSP - v31.1.0.45.0815
eMMC - boot
device: ville
build id: JR003C
SDK version: 16
Release: 4.1.1
Incremental version: 133955.7
Does anyone know how to fix this phone?
I suspect that either the firmware installed incorrectly or is the wrong version for the phone.
Does anyone know where to get the correct version of the firmware?
Thank You,
Greg
dwa789 said:
I have a HTC One S cell phone that stopped working after I did a software update from the settings menu. The phone has no service (not able to connect to the network). My service provider is Wind mobile. They tried a "hard reset" or factory data reset this did not solve the problem. Then I had a technician replace the firmware and downgrade to an earlier version of software. This got the phone to work. I was able to make one call. However I was unable to pickup wifi. I tried to turn on wifi in the setting menu and then the phone stopped working again. I have tried talking to HTC customer service but they have not been able (or willing) to help.
HTC One S
model Z520m, Android
HBOOT- 2.15.0000
RADIO - 1.11.50.05.28
Open DSP - v31.1.0.45.0815
eMMC - boot
device: ville
build id: JR003C
SDK version: 16
Release: 4.1.1
Incremental version: 133955.7
Does anyone know how to fix this phone?
I suspect that either the firmware installed incorrectly or is the wrong version for the phone.
Does anyone know where to get the correct version of the firmware?
Thank You,
Greg
Click to expand...
Click to collapse
Connect phone in fastboot mode to your computer, open CMD commandline and type "fastboot getvat all". You will get a log.Delete your IMEI / serial from the log and post it here (The LOG not the IMEI...)
LS.xD said:
Connect phone in fastboot mode to your computer, open CMD commandline and type "fastboot getvat all". You will get a log.Delete your IMEI / serial from the log and post it here (The LOG not the IMEI...)
Click to expand...
Click to collapse
bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.1500.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: GLOBA001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4106mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'll get the link for the matching RUU file for you
There is no matching RUU OTA update is avaiable. Are you familiar with using fastboot commands? DOWNLOAD the OTA. Extract the included firmware.zip and flash it via fastboot. If it works --> good. If not you'll have to change your CID to install a RUU for unbraded versions of the phone.
Thanks for locating the OTA update. I am not familiar with using fastboot commands. Can you link me to a guide or post that explains the procedure.
Thank You,
Greg
dwa789 said:
Thanks for locating the OTA update. I am not familiar with using fastboot commands. Can you link me to a guide or post that explains the procedure.
Thank You,
Greg
Click to expand...
Click to collapse
Download ADB/fastboot, uninstall HTC Sync. Connect your phone in fastboot mode, open CMD commandline an type:
"fastboot oem rebootRUU"
"fastboot flash zip firmware.zip"
"fastboot flash zip firmware.zip" (AGAIN!)
"fastboot reboot-bootloader"
Then reboot the phone to check if android is running
I followed the steps you provided and the firmware loaded fine and Android is also running. However the phone is still not working properly. The phone was randomly switching between "no service" for several minutes and then to WIND away (roaming) and then to 4G with varying signal strength. I was able to make a brief call while the phone was in 4G mode. Now the phone seems to be stuck with "no service" again. Any ideas as to what could be the problem?
Thanks
dwa789 said:
I followed the steps you provided and the firmware loaded fine and Android is also running. However the phone is still not working properly. The phone was randomly switching between "no service" for several minutes and then to WIND away (roaming) and then to 4G with varying signal strength. I was able to make a brief call while the phone was in 4G mode. Now the phone seems to be stuck with "no service" again. Any ideas as to what could be the problem?
Thanks
Click to expand...
Click to collapse
Yes You will need to install a FULL system e.g. RUU. The firmware contains all basic partitions of your phone BUT not System, data ... If you tried instaling a OTA update and it failed --> You need a CLEAN installation.
LS.xD said:
Yes You will need to install a FULL system e.g. RUU. The firmware contains all basic partitions of your phone BUT not System, data ... If you tried instaling a OTA update and it failed --> You need a CLEAN installation.
Click to expand...
Click to collapse
How do I preform a CLEAN (Full system) installation?
dwa789 said:
How do I preform a CLEAN (Full system) installation?
Click to expand...
Click to collapse
You can't. As least you can't do it by the ormal way, as there is NO stock RUU package available for your phone. You can Unlock the bootloader, set it S-OFF, then you're able to install unbranded or custom software.
LS.xD said:
You can't. As least you can't do it by the ormal way, as there is NO stock RUU package available for your phone. You can Unlock the bootloader, set it S-OFF, then you're able to install unbranded or custom software.
Click to expand...
Click to collapse
I hate to ask any more questions because you have been so helpful in answering all my questions but I would really like to get my phone working again.
How do I go about Unlocking the bootloader, setting it to S-OFF and then installing unbranded software? Also where do I get unbranded software that will work with my phone?
dwa789 said:
I hate to ask any more questions because you have been so helpful in answering all my questions but I would really like to get my phone working again.
How do I go about Unlocking the bootloader, setting it to S-OFF and then installing unbranded software? Also where do I get unbranded software that will work with my phone?
Click to expand...
Click to collapse
How about you get Teamviever and i'll set up the phone for you?
LS.xD said:
How about you get Teamviever and i'll set up the phone for you?
Click to expand...
Click to collapse
Ok, I installed Teamviewer on my computer.
dwa789 said:
Ok, I installed Teamviewer on my computer.
Click to expand...
Click to collapse
PM me ID+pass when you're ready
My device is currently in a rebooting loop, and every time I try and Install the latest nightly for my HTC One A9 (GSM - US) I get the error(s):
Found blacklisted SBL1 Version, update your firmware
assert failed: hiae.verify_sbl1(" 0.0.020.1.50") == "1
Updater process ended with ERROR: 7
I tried deleting some code in the META-INF/com/google/android/updater.script file that checked for "assert" and I got the CM ROM to install, but only to find out that my phone is in a constant reboot loop.
EXTRA: when I run "fastboot getvar all" I get the message:
(bootloader) kernel: lk
(bootloader) product: htc_hiaeul
(bootloader) version: 1.0
(bootloader) imei: ********
(bootloader) version-main: 1.27.502.5
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PQ912000
(bootloader) cid: CWS__001
ALSO:
AT&T (Cingular)
modelid: 2PQ912000
cidnum: CWS__001
Have you tried listening to the error updating your firmware?
You are running 1.27 you need 1.57.X
You need to use sunshine and s-off then use the thread to convert to HTC one a9 USA unlocked. Use firmware package 1.57.x
kamredos said:
My device is currently in a rebooting loop, and every time I try and Install the latest nightly for my HTC One A9 (GSM - US) I get the error(s):
Found blacklisted SBL1 Version, update your firmware
assert failed: hiae.verify_sbl1(" 0.0.020.1.50") == "1
Updater process ended with ERROR: 7
I tried deleting some code in the META-INF/com/google/android/updater.script file that checked for "assert" and I got the CM ROM to install, but only to find out that my phone is in a constant reboot loop.
EXTRA: when I run "fastboot getvar all" I get the message:
(bootloader) kernel: lk
(bootloader) product: htc_hiaeul
(bootloader) version: 1.0
(bootloader) imei: ********
(bootloader) version-main: 1.27.502.5
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PQ912000
(bootloader) cid: CWS__001
ALSO:
AT&T (Cingular)
modelid: 2PQ912000
cidnum: CWS__001
Click to expand...
Click to collapse
You are running firmware 1.27* and 1.5* is required.
Go the A9 RUU thread in this forum, find the 1.5* RUU that corresponds to your device, download it, put it in the SD card, reboot the A9 in download mode and update the firmware. Then you can flash CM.
If there is no 1.5* for your device, then S-off will be necessary to change it.
Ultramanoid said:
You are running firmware 1.27* and 1.5* is required.
Go the A9 RUU thread in this forum, find the 1.5* RUU that corresponds to your device, download it, put it in the SD card, reboot the A9 in download mode and update the firmware. Then you can flash CM.
If there is no 1.5* for your device, then S-off will be necessary to change it.
Click to expand...
Click to collapse
Yes, but in the original post, the model was att (no 1.5.x yet) S-off is required ?
Ultramanoid said:
You are running firmware 1.27* and 1.5* is required.
Go the A9 RUU thread in this forum, find the 1.5* RUU that corresponds to your device, download it, put it in the SD card, reboot the A9 in download mode and update the firmware. Then you can flash CM.
If there is no 1.5* for your device, then S-off will be necessary to change it.
Click to expand...
Click to collapse
Thanks for the reply, I will look into that.
If I get S-off, then what RUU will I download then?
Edit: Nvm, I read The Scam's reply and that answered my question.
The_scam said:
Have you tried listening to the error updating your firmware?
You are running 1.27 you need 1.57.X
You need to use sunshine and s-off then use the thread to convert to HTC one a9 USA unlocked. Use firmware package 1.57.x
Click to expand...
Click to collapse
Do you think a version of CM will ever be available for my firmware version S-on?
kamredos said:
Do you think a version of CM will ever be available for my firmware version S-on?
Click to expand...
Click to collapse
Only if ATT updates firmware to 1.5*, otherwise no. I didn't know if ATT had done it, apparently not.
( I have an unlocked, carrier-independent hiaeuhl, came with 1.10, I updated to 1.56, still S-on. )
CM can't support older firmware because hTC's latest kernel requires 1.5* firmware.
This is one of many problems of getting a carrier-locked device. Like the previous post says, if you get S-off, then you can modify the firmware as you wish, right now that is the only option you have to run CM 14.
The_scam said:
Have you tried listening to the error updating your firmware?
You are running 1.27 you need 1.57.X
You need to use sunshine and s-off then use the thread to convert to HTC one a9 USA unlocked. Use firmware package 1.57.x
Click to expand...
Click to collapse
I have an AT&T HTC One A9. Am I able to update to the 2.18.617.10 unlocked ROM if I follow the steps (sunshine and s-off), or do I need to track down 1.57.x? I'm on 1.27.502.5 now.
chadrebuck said:
I have an AT&T HTC One A9. Am I able to update to the 2.18.617.10 unlocked ROM if I follow the steps (sunshine and s-off), or do I need to track down 1.57.x? I'm on 1.27.502.5 now.
Click to expand...
Click to collapse
Yes.
The_scam said:
Yes.
Click to expand...
Click to collapse
I did use sunshine to do the s-off then set the cid to the unlocked cid of BS_US001. I didn't change the mid as it was already 2PQ912000
I did not have any luck updating direct to 2.x, so I ended up installing an older version of 1.x (2PQ9IMG_HIA_AERO_UL_M60_SENSE7GP_ATT_NA_Gen_Unlock_1.12.617.6_signed.zip) and then went through hours of updates (maybe a dozen) via the normal device update process until my device was finally updated to the latest os. I found out that the htc software just kept crashing on my win 10 pc, and on my win 7 pc it still had trouble. I installed the rom update by placing it in the root dir of my sd card and renaming it to 2PQ9IMG.zip, then booting into download mode. Initially, I couldn't update directly to 2.x using this same method either. It was failing with a 12 ru_zip error.
The AT&T latest os had problems dropping wifi for me so it made it unusable for pandora or any streaming service. Now the phone works fine and I've found no other issues yet. I was initially planning to install lineage os but I'll just keep on the stock htc software for now since android 7.0 is working good on there. Why would AT&T not continue with the updates HTC makes available? The phone is worthless with the AT&T version of software. I'm surprised to see a decent resale value on AT&T HTC One A9. I was hoping to find them for $20 so I could get another one but I don't want to pay $100.
chadrebuck said:
I did use sunshine to do the s-off then set the cid to the unlocked cid of BS_US001. I didn't change the mid as it was already 2PQ912000
I did not have any luck updating direct to 2.x, so I ended up installing an older version of 1.x (2PQ9IMG_HIA_AERO_UL_M60_SENSE7GP_ATT_NA_Gen_Unlock_1.12.617.6_signed.zip) and then went through hours of updates (maybe a dozen) via the normal device update process until my device was finally updated to the latest os. I found out that the htc software just kept crashing on my win 10 pc, and on my win 7 pc it still had trouble. I installed the rom update by placing it in the root dir of my sd card and renaming it to 2PQ9IMG.zip, then booting into download mode. Initially, I couldn't update directly to 2.x using this same method either. It was failing with a 12 ru_zip error.
The AT&T latest os had problems dropping wifi for me so it made it unusable for pandora or any streaming service. Now the phone works fine and I've found no other issues yet. I was initially planning to install lineage os but I'll just keep on the stock htc software for now since android 7.0 is working good on there. Why would AT&T not continue with the updates HTC makes available? The phone is worthless with the AT&T version of software. I'm surprised to see a decent resale value on AT&T HTC One A9. I was hoping to find them for $20 so I could get another one but I don't want to pay $100.
Click to expand...
Click to collapse
I don't have this device anymore, so pardon me if I am confused, but when I had the ATT version, I don't see any reason to downgrade the firmware to 1.27?? If your looking to install stock and get updates, most users have had success by flashing 1.57 firmware, then 1.57 rom. The signing key in 1.57 is different than 1.27, so you have to extract 1.57 firmware from the 1.57 ruu and flash it, or update to 1.57 using a 1.27 ota.
The_scam said:
I don't have this device anymore, so pardon me if I am confused, but when I had the ATT version, I don't see any reason to downgrade the firmware to 1.27?? If your looking to install stock and get updates, most users have had success by flashing 1.57 firmware, then 1.57 rom. The signing key in 1.57 is different than 1.27, so you have to extract 1.57 firmware from the 1.57 ruu and flash it, or update to 1.57 using a 1.27 ota.
Click to expand...
Click to collapse
My phone had 1.27 and I tried to install the 1.57 ruu without success. Maybe there is a way to get it to work by installing 1.57 firmware first then the 1.57 ruu but I'm new at this so I went with what I thought should work. For the unlocked version I could not find a 1.27 ruu, so I went with 1.12. Then I went through about a dozen ota updates to get to the latest release.
chadrebuck said:
My phone had 1.27 and I tried to install the 1.57 ruu without success. Maybe there is a way to get it to work by installing 1.57 firmware first then the 1.57 ruu but I'm new at this so I went with what I thought should work. For the unlocked version I could not find a 1.27 ruu, so I went with 1.12. Then I went through about a dozen ota updates to get to the latest release.
Click to expand...
Click to collapse
Ok yes, so what you need to do is install the unlocked version 1.27 without rooting it, then ota to 1.57 nougat. You could flash 1.57 firmware first, although I don't remember how to extract it properly. If you want to try, here's a quote from the ruu thread that might be helpful. I believe you can flash the firmware using "fastboot oem flash firmware "blah blah.zip/img I forget"
alray said:
If you can use adb/fastboot you can use the decrypt tool, its not harder.
https://forum.xda-developers.com/ch...niversal-htc-ruu-rom-decryption-t3382928/amp/
Take the time to read the first few posts, there are instructions with examples.
Click to expand...
Click to collapse
Now Lineage OS support hotspot so don't need to try the old roms with old firmware 1.x or 1.5x, install the latest firmware and update to Lineage OS