Database Info

[Q] Looking for Ruu for H3G__001

Hi all, I've been searching for hours with no success, But was wondering does anyone have a Nandroid backup of a H3G__001 rom or a link to an official Ruu? I just can't seem to find one anywhere. Hope someone can help. Thanks.

Look on androidfiles.org/ruu
Sent from my HTC One S using Tapatalk 2

usaff22 said:
Look on androidfiles.org/ruu
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
i download 2 different ruu h3g and always i have error 155 when i try flash the phone.
My phone is vrick only bootloader turn on
thats happend after i try flash viper rom for htc one s s4
i try put stock boot and recovery lock bootloader and nothing always i have error 155 witht this 2 ruu
RUU which i try
RUU_Ville_U_H3G_UK_1.78.771.5_Radio_0.16.31501S.19_2_10.23.31501S.10L_release_258982_signed
RUU_Ville_U_H3G_UK_1.53.771.4_Radio_0.15.31501S.19_2_10.13.31501S.06L_release_251870_signed
bootloader) version: 0.5
bootloader) version-bootloader: 2.13.0000
bootloader) version-baseband: 1.11.50.05.28
bootloader) version-cpld: None
bootloader) version-microp: None
bootloader) version-main:
bootloader) version-misc: PVT SHIP S-ON
bootloader) serialno: SH**********
bootloader) imei: 3**************
bootloader) product: vle
bootloader) platform: HBOOT-8960
bootloader) modelid: PJ4010000
bootloader) cidnum: H3G__001
bootloader) battery-status: good
bootloader) battery-voltage: 4128mV
bootloader) partition-layout: Generic
bootloader) security: on
bootloader) build-mode: SHIP
bootloader) boot-mode: RUU
bootloader) commitno-bootloader: dirty-26dff973
bootloader) hbootpreupdate: 11
bootloader) gencheckpt: 0
ll: Done!
Click to expand...
Click to collapse
Regards

blackangel82 said:
i download 2 different ruu h3g and always i have error 155 when i try flash the phone.
My phone is vrick only bootloader turn on
thats happend after i try flash viper rom for htc one s s4
i try put stock boot and recovery lock bootloader and nothing always i have error 155 witht this 2 ruu
RUU which i try
RUU_Ville_U_H3G_UK_1.78.771.5_Radio_0.16.31501S.19_2_10.23.31501S.10L_release_258982_signed
RUU_Ville_U_H3G_UK_1.53.771.4_Radio_0.15.31501S.19_2_10.13.31501S.06L_release_251870_signed
Regards
Click to expand...
Click to collapse
Redownload the RUU, could be corrupt. Relock bootloader. Run as administrator.
Try those steps.

usaff22 said:
Redownload the RUU, could be corrupt. Relock bootloader. Run as administrator.
Try those steps.
Click to expand...
Click to collapse
both ruu can corupt ? anyway i try this steps
and i have win7 this something change ?
EDIT1
i try this steps with new ruu and this same error 155 after checking signatures
Regards
Lucas

blackangel82 said:
both ruu can corupt ? anyway i try this steps
and i have win7 this something change ?
EDIT1
i try this steps with new ruu and this same error 155 after checking signatures
Regards
Lucas
Click to expand...
Click to collapse
Did you relock bl?

usaff22 said:
Did you relock bl?
Click to expand...
Click to collapse
yes i did
when ruu show error 155 and i unplug the cabel from phone on display show RUU update failed and after this when i reboot phone going to bootloader without htc logo
screen from bootloader after ruu error:
[img=http://s14.postimg.org/acb3f3dvx/IMAG0294.jpg]

blackangel82 said:
yes i did
when ruu show error 155 and i unplug the cabel from phone on display show RUU update failed and after this when i reboot phone going to bootloader without htc logo
screen from bootloader after ruu error:
[img=http://s14.postimg.org/acb3f3dvx/IMAG0294.jpg]
Click to expand...
Click to collapse
In that case I would unlock bl again, flash a rom, s-off and change cid to HTC__001. Then run an unbranded WWE RUU.

usaff22 said:
In that case I would unlock bl again, flash a rom, s-off and change cid to HTC__001. Then run an unbranded WWE RUU.
Click to expand...
Click to collapse
which rom ?? i try again viper 2.0.1 and is only erase and after this finish in aroma installer

blackangel82 said:
which rom ?? i try again viper 2.0.1 and is only erase and after this finish in aroma installer
Click to expand...
Click to collapse
Use another ROM like CM10, doesn't have to be ViperOneS

usaff22 said:
Use another ROM like CM10, doesn't have to be ViperOneS
Click to expand...
Click to collapse
maybe you know my phone is S3 or S4 ?
When i try flash rom via twrp all time show me errors unable to mount cache unable to mount etc
Regards

blackangel82 said:
maybe you know my phone is S3 or S4 ?
When i try flash rom via twrp all time show me errors unable to mount cache unable to mount etc
Regards
Click to expand...
Click to collapse
I don't know, check yourself in the bootloader, VILLEC2 is S3
Try reflashing twrp

Current hboot is to high for those ruu, cant downgrade without s-off
Verstuurd van mijn HTC One S met Tapatalk

Can't flash JB roms on HTC One S C2

First of, a bunch of thanks to you for helping me get from a complete and utter noob to a just complete noob. Managed to root, install roms and get out of a LOT of soft bricks (i just don't give up!) with your awesome help, all by searching older posts. However, this time i find myself in a pickle.
I own an HTC One S C2 with Hboot 2.0.9, had stock ICS when i bought it with no option to update to JB (which is why i rooted it in the first place). Something about this particular version of the phone not being updated by HTC global, which i found out about after i bought it, duh. Anyway. I've tried installing JB roms from this thread http://forum.xda-developers.com/showthread.php?t=2239265 with no luck. Phone just keeps getting into HTC logo screen loops. Right now i am on backtobasics v3 rom. Here's how i tried installing them JB roms and also the rom i am using right now (using TWRP 2.4.1 because newest version wouldn't work with backtobasics rom):
(note: some roms had sliiiightly different directions, i just followed each and every one's description closely)
1) Download Rom.zip
2) Extract boot.img from Rom.zip to fastboot folder
3) Enter Recovery
4) Mount SD card
5) Copy Rom.zip to SD card
6) Unmount
7) Wipe data, system, cache, dalvik cache and factory reset
8) Install Rom.zip
9) Reboot Bootloader
10) Go to fastboot USB mode
11) dem commands: fastboot flash boot boot.img then fastboot erase cache then fastboot reboot
12) BOOM! HTC LOGO LOOPS!
I've also tried installing a RUU but i couldn't find any for my CID. Then i thought about getting a SuperCID but, frankly, i scrached that thought the minute i saw the how to do it thread. Here's the phone info
version-bootloader: 2.09.0001
version-baseband: 16.05.20.24_M
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: FA335W400602
imei: 352911052281278
product: villec2
platform: HBOOT-8260
modelid: PJ4021000
cidnum: BSTAR301
battery-status: good
battery-voltage: 4170mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: f616909f
hbootpreupdate: 11
gencheckpt: 0
Thank you, in advance, for any advice you may be able to provide me with

Mkay, since i got no answer i went back to searching again! Unfortunately, i still have no asolution to my problem
From what i understand i have to: find a RUU to get from android version 4.0.3 up to JB version. Then i will be able to flash JB roms. But there is no RUU for CID BSTAR301.
I did find a thread with nandroid backup for a BSTAR301 which updates the version without a RUU but it was for HTC One X, i guess i shouldn't use that at all.
I am thinking about doing a SuperCID to install a RUU, then get back to my actual CID and flash a custom JB rom..
Would appreciate any advice

Tateh said:
Mkay, since i got no answer i went back to searching again! Unfortunately, i still have no asolution to my problem
From what i understand i have to: find a RUU to get from android version 4.0.3 up to JB version. Then i will be able to flash JB roms. But there is no RUU for CID BSTAR301.
I did find a thread with nandroid backup for a BSTAR301 which updates the version without a RUU but it was for HTC One X, i guess i shouldn't use that at all.
I am thinking about doing a SuperCID to install a RUU, then get back to my actual CID and flash a custom JB rom..
Would appreciate any advice
Click to expand...
Click to collapse
Yes, in your case S-OFF, Changing CID to something which has a JB RUU would do the trick. I think SuperCID is not necessary.
Sent from my Nexus 7 using Tapatalk HD

heakit Purpose
khan.orak said:
Yes, in your case S-OFF, Changing CID to something which has a JB RUU would do the trick. I think SuperCID is not necessary.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
THANK you! Currently trying to S-OFF it!

Tateh said:
THANK you! Currently trying to S-OFF it!
Click to expand...
Click to collapse
did you get S-OFF?

Not yet.. So exhausted. I tried the moonshine method but, just like trhe instructions state, i should have JB and be on stock for it to work properly, which is not possible since my phone has a BSTAR301 CID and is stuck on 4.0.3 with no stock roms available.
From what i've read, my only hope of S-OFF is to wait for the fellas working on Revolutionary method for S-OFF to release the correct version for this phone. I just hope it's soon and I thank them for their efforts, i'm so disappointed at this phone

Tateh said:
Not yet.. So exhausted. I tried the moonshine method but, just like trhe instructions state, i should have JB and be on stock for it to work properly, which is not possible since my phone has a BSTAR301 CID and is stuck on 4.0.3 with no stock roms available.
From what i've read, my only hope of S-OFF is to wait for the fellas working on Revolutionary method for S-OFF to release the correct version for this phone. I just hope it's soon and I thank them for their efforts, i'm so disappointed at this phone
Click to expand...
Click to collapse
same here. I just wrote to them asking for that

S-OFF done
I did S-OFF already. Now i need to know what CID put in my phone?? and which RUU install on it??
My MID is: PJ4021000
so i don't know if the Europe RUU's work in my phone. Maybe the radio have problem or no?? because the RUU say MID version: PJ4020000. Someone knows about this??

I have heard that JB update for BSTAR is now available.
Sent from my HTC One S using Tapatalk 4 Beta

khan.orak said:
I have heard that JB update for BSTAR is now available.
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yeah it's done. But I would change CID not have to wait for another update Brightstar in so long.

gustavoegg said:
Yeah it's done. But I would change CID not have to wait for another update Brightstar in so long.
Click to expand...
Click to collapse
Be sure to match MID or you'll end up having problems with future updates.
Sent from my HTC One S using Tapatalk 4 Beta

Episcopal yupdfir
khan.orak said:
Be sure to match MID or you'll end up having problems with future updates.
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
Where i can find a RUU for Model ID: PJ4021000?? Because i need update for OTA after install the RUU

gustavoegg said:
Where i can find a RUU for Model ID: PJ4021000?? Because i need update for OTA after install the RUU
Click to expand...
Click to collapse
You have to manually check the ANDROID-INFO.TXT to match CID + MID
Sent from my HTC One S using Tapatalk 4 Beta

Tateh said:
First of, a bunch of thanks to you for helping me get from a complete and utter noob to a just complete noob. Managed to root, install roms and get out of a LOT of soft bricks (i just don't give up!) with your awesome help, all by searching older posts. However, this time i find myself in a pickle.
I own an HTC One S C2 with Hboot 2.0.9, had stock ICS when i bought it with no option to update to JB (which is why i rooted it in the first place). Something about this particular version of the phone not being updated by HTC global, which i found out about after i bought it, duh. Anyway. I've tried installing JB roms from this thread http://forum.xda-developers.com/showthread.php?t=2239265 with no luck. Phone just keeps getting into HTC logo screen loops. Right now i am on backtobasics v3 rom. Here's how i tried installing them JB roms and also the rom i am using right now (using TWRP 2.4.1 because newest version wouldn't work with backtobasics rom):
(note: some roms had sliiiightly different directions, i just followed each and every one's description closely)
1) Download Rom.zip
2) Extract boot.img from Rom.zip to fastboot folder
3) Enter Recovery
4) Mount SD card
5) Copy Rom.zip to SD card
6) Unmount
7) Wipe data, system, cache, dalvik cache and factory reset
8) Install Rom.zip
9) Reboot Bootloader
10) Go to fastboot USB mode
11) dem commands: fastboot flash boot boot.img then fastboot erase cache then fastboot reboot
12) BOOM! HTC LOGO LOOPS!
I've also tried installing a RUU but i couldn't find any for my CID. Then i thought about getting a SuperCID but, frankly, i scrached that thought the minute i saw the how to do it thread. Here's the phone info
version-bootloader: 2.09.0001
version-baseband: 16.05.20.24_M
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: FA335W400602
imei: 352911052281278
product: villec2
platform: HBOOT-8260
modelid: PJ4021000
cidnum: BSTAR301
battery-status: good
battery-voltage: 4170mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: f616909f
hbootpreupdate: 11
gencheckpt: 0
Thank you, in advance, for any advice you may be able to provide me with
Click to expand...
Click to collapse
Hi, I have same problem with you. Have you got any solution?

Unfortunately not yet, I switched back to my old xperia ray while i wait for the revolutionary team to release a version for HTC One S

[Q] Stuck at HTC logo after failed stock update

Heyy, so i was wondering if yous could help me. I have a stock HTC Sensation EU, t-mobile version, which I had updated to the latest version (4.0.3 I think). During the upgrade-process something went wrong and now it doesn't go past the HTC logo. S-ON. When in Hboot it shows no found something.img. What is the way to fix this?
If possible I'd like to root it as well and use the Cyanogenmod.

HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development

blogodoblogodo said:
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
Click to expand...
Click to collapse
Seems good, i´ll try it out

blogodoblogodo said:
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
Click to expand...
Click to collapse
So it worked, but it didn't. I managed to install a custom rom, but after 10 seconds (if it even was that much), the system crashes and reboots, only to do the same thing again.
I used a RUU as well but I got a signing error (132) when using the RUU. I then tried installing the RUU through fastboot and I got further. I did however got the error saying the CID wasn't matching. In the .txt file from the zip I had added my CID, So I thought it had to work.
There is no official rom for my cid (T-MOB003) unfortunately.
This is starting to give me a headache

Search for this HERE

blogodoblogodo said:
Search for this HERE
Click to expand...
Click to collapse
Well DEFINITELY not there.
Those are Sensation XL.
Here's for our Sensation http://forum.xda-developers.com/showthread.php?t=1672425

Hoooooooo, Nooo,
Sorry ,really sorry
I googled "T-MOB003 for SENSATION"
Sorry DrNickjen
Thank You Nicx59

Nicx59 said:
Well DEFINITELY not there.
Those are Sensation XL.
Here's for our Sensation http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
I have read that once, but I'll do it again; this time more thorougly.
The RUU I'm trying to install is RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_Radio_11.69.3504.00U_11.22.3504.07_M_release_246089_signed
fastboot getvar all returns
Code:
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.114.2
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: T-MOB003
(bootloader) battery-status: good
(bootloader) battery-voltage: 4104mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9d24123f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Since my cidnum is not in the RUU, (and there isn't a RUU for my cid) I'll have to add it according to the guide. I'll get to that later. hboot version to install and version-main are both higher than currently installed, so that shouldn't be an issue.
My phone is S-ON, but unlocked so I'll have to relock it again. Followed instructions and device is *** RELOCKED ***. Displays, however, a security warning. I'll now proceed with the installation by executing the exe. If I'm right I should see an error.
Error: Customer ID incorrect, as expected. I'll now try to install manually.
Since my CID is different I'll change it in the .zip. 7z didn't allow me to change it in the archive itself so I've extracted the archive, changed android-info.txt to:
Code:
modelid: PG5813000
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__N34
cidnum: HTC__203
cidnum: HTC__102
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__A07
cidnum: HTC__304
cidnum: HTC__032
cidnum: HTC__016
cidnum: T-MOB003
mainver: 3.32.401.5
hbootpreupdate:12
DelCache:1
Note: When pasting this my CID was placed on the same line as mainver. Inserted an enter and repasted in android-info.txt.
What I did as well was unlock the bootloader again, changed recovery to the file inside the rom.zip, and relocked the bootloader. I read this was a fix for the problem.
THIS POST IS IN PROGRESS

HI its not necessary to show ure imei, plz, edit your post and Erase it.

blogodoblogodo said:
HI its not necessary to show ure imei, plz, edit your post and Erase it.
Click to expand...
Click to collapse
Thanks.

Just Hit ThAnks Button
So For you, is it good???

blogodoblogodo said:
Just Hit ThAnks Button
So For you, is it good???
Click to expand...
Click to collapse
Nope. I gave up fot the day because I couldn't het the PG58IMG flashed. It didn't have an effect in hboot so I tried using fastboot but i got an unknown error. The tries installing ViperS 2.0, which succeeded. On boot, however, the system crashed and rebooted automatically, just like the other rom's i've tried.
If only I could get a rom working...

DrNickjen said:
Nope. I gave up fot the day because I couldn't het the PG58IMG flashed. It didn't have an effect in hboot so I tried using fastboot but i got an unknown error. The tries installing ViperS 2.0, which succeeded. On boot, however, the system crashed and rebooted automatically, just like the other rom's i've tried.
If only I could get a rom working...
Click to expand...
Click to collapse
actually if you are still on gingerbread firmware you can't boot any ics or jb rom
flash this rom from recovery
http://d-h.st/bqL
if you still want to upgrade to ics then S-OFF the device from here
http://revolutionary.io/
after that flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
then flash any ics or jb rom from recovery

rzr86 said:
actually if you are still on gingerbread firmware you can't boot any ics or jb rom
flash this rom from recovery
http://d-h.st/bqL
if you still want to upgrade to ics then S-OFF the device from here
http://revolutionary.io/
after that flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
then flash any ics or jb rom from recovery
Click to expand...
Click to collapse
Flashed it using Cwm, first did a full wipe and it installed fine. It then booted en got to a black screen and rebooted. Wiping Dalvik cache + /cache didn't work as a solution.
Same thing as any other .zip I've installed through recovery.

DrNickjen said:
Flashed it using Cwm, first did a full wipe and it installed fine. It then booted en got to a black screen and rebooted. Wiping Dalvik cache + /cache didn't work as a solution.
Same thing as any other .zip I've installed through recovery.
Click to expand...
Click to collapse
can you post your bootloader details again and what rom did you try to flash now?
also did you try to follow the steps i gave you?

rzr86 said:
can you post your bootloader details again and what rom did you try to flash now?
also did you try to follow the steps i gave you?
Click to expand...
Click to collapse
UNLOCKED
Pyramid PVT SHIP S-ON RL
HBOOT-1.18.000
eMMC-boot
August 2nd 2011
Tried to flash the rom you linked to and yes I have.

DrNickjen said:
UNLOCKED
Pyramid PVT SHIP S-ON RL
HBOOT-1.18.000
eMMC-boot
August 2nd 2011
Tried to flash the rom you linked to and yes I have.
Click to expand...
Click to collapse
change the recovery to 4ext
before flash the rom enable smartflash from 4ext

rzr86 said:
change the recovery to 4ext
before flash the rom enable smartflash from 4ext
Click to expand...
Click to collapse
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?

DrNickjen said:
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
Click to expand...
Click to collapse
First make a full backup of your device through 4ext.
Then just flash the zips from one of the following releases:
android1234567's release (here you have to flash rom and kernel seperately)
albinoman887's releease
And last flash gapps from here

DrNickjen said:
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
Click to expand...
Click to collapse
see my previous post of what to do now
S-OFF
flash 3.33 universal(check md5 sums before flashing)
flash cyanogenmod rom
done
note:when you achieve S-OFF you won't need anymore the smartflash feature

[Q] Wi-Fi and Bluetooth error :(

Hi everyone, i'm new at this forum and i have very strange problem with my HTC Sensation.
My friend bought this phone, everything was ok. He unlocked bootloader with HTCdev, flashed CWM and some CM10.1 ROM (and Gapps). Wifi and Bluetooth stopped working. In settings, the switches at wifi and bluetooth was gray. If i open wifi, there was something like "Turning on..." (bluetooth was the same).
Then he gave this phone to me. I wanted to solve this problem. I flashed many ROMs, for example this: http://forum.xda-developers.com/showthread.php?t=2530073 . I tried Wifix, not working. I flashed 4EXTRecovery and tried SmartFlash. I tried flash stock ICS ROM (about 400MB zip), still not working. Then i successful do S-OFF by Juopunut. I have HBOOT-1.27.1111, RADIO-11.25A-3504.13_M.
Please, can anyone help me? :crying:

PitnerT said:
Hi everyone, i'm new at this forum and i have very strange problem with my HTC Sensation.
My friend bought this phone, everything was ok. He unlocked bootloader with HTCdev, flashed CWM and some CM10.1 ROM (and Gapps). Wifi and Bluetooth stopped working. In settings, the switches at wifi and bluetooth was gray. If i open wifi, there was something like "Turning on..." (bluetooth was the same).
Then he gave this phone to me. I wanted to solve this problem. I flashed many ROMs, for example this: http://forum.xda-developers.com/showthread.php?t=2530073 . I tried Wifix, not working. I flashed 4EXTRecovery and tried SmartFlash. I tried flash stock ICS ROM (about 400MB zip), still not working. Then i successful do S-OFF by Juopunut. I have HBOOT-1.27.1111, RADIO-11.25A-3504.13_M.
Please, can anyone help me? :crying:
Click to expand...
Click to collapse
have you tried to re flash the rom with FULL WIPE??

Fakhri 19 said:
have you tried to re flash the rom with FULL WIPE??
Click to expand...
Click to collapse
Yea, i did full wipe everytime. Btw, now it's hard bricket, because i wanted to do completly stock restore and i tried S-ON... Can't power on, LED isn't isn't lighting when charging, can't open bootloader

PitnerT said:
Yea, i did full wipe everytime. Btw, now it's hard bricket, because i wanted to do completly stock restore and i tried S-ON... Can't power on, LED isn't isn't lighting when charging, can't open bootloader
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1522351

rzr86 said:
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
Yea, it didn't work at Ubuntu 8 32bit, but while ago i tried Ubuntu 13 64bit and i have back original HBOOT, its S-ON and LOCKED!!!

PitnerT said:
Yea, it didn't work at Ubuntu 8 32bit, but while ago i tried Ubuntu 13 64bit and i have back original HBOOT, its S-ON and LOCKED!!!
Click to expand...
Click to collapse
i am just curious
what exactly did you do and bricked the device?

rzr86 said:
i am just curious
what exactly did you do and bricked the device?
Click to expand...
Click to collapse
i wrote "fastboot oem writesecureflag 3"
Okay, so i am S-ON, LOCKED bootloader, Security Warning in HBOOT. I have no recovery in this moment. I want flash ION CM11 ROM.
So, how? Do HTCdev or just S-OFF? I will flash 4EXT Recovery... I want working wifi and bluetooth. Thank you

PitnerT said:
i wrote "fastboot oem writesecureflag 3"
Okay, so i am S-ON, LOCKED bootloader, Security Warning in HBOOT. I have no recovery in this moment. I want flash ION CM11 ROM.
So, how? Do HTCdev or just S-OFF? I will flash 4EXT Recovery... I want working wifi and bluetooth. Thank you
Click to expand...
Click to collapse
just to know
you are using this command only after using a ruu.exe and make sure that you have the official hboot version
now just go for S-OFF

rzr86 said:
just to know
you are using this command only after using a ruu.exe and make sure that you have the official hboot version
now just go for S-OFF
Click to expand...
Click to collapse
Thanks, i will S-OFF. Must i unlock bootloader by HTCDev after S-OFF? Or just flash recovery, ROM, Kernel, Gapps?

Okay, I did HTCdev Unlock (it was only way to flash something), then flashed 4EXT, then did S-OFF and flashed 3.32 Stock ROM. Wifi and BT still not working Please, any ideas?

PitnerT said:
Okay, I did HTCdev Unlock (it was only way to flash something), then flashed 4EXT, then did S-OFF and flashed 3.32 Stock ROM. Wifi and BT still not working Please, any ideas?
Click to expand...
Click to collapse
wipe dalvik + cache from recovery
by the way it is not the only way to flash something after S-OFF
after S-OFF you could flash from bootloader 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
it gives also a patched hboot which is unlocked

rzr86 said:
wipe dalvik + cache from recovery
by the way it is not the only way to flash something after S-OFF
after S-OFF you could flash from bootloader 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
it gives also a patched hboot which is unlocked
Click to expand...
Click to collapse
I always wipe everything... It was only way, without unlocked bootloader i can't do S-OFF :laugh: Yeah, i tried flash 3.33 firmware, than 3.33 ROM, but "Installation aborted (status 1)"

PitnerT said:
I always wipe everything... It was only way, without unlocked bootloader i can't do S-OFF :laugh: Yeah, i tried flash 3.33 firmware, than 3.33 ROM, but "Installation aborted (status 1)"
Click to expand...
Click to collapse
Installation aborted (status 1) from the rom or from the firmware zip?
when you used the ruu.exe to return back to stock did you check the wifi and bluetooth then?
try again flashing the boot.img of the rom via fastboot command

rzr86 said:
Installation aborted (status 1) from the rom or from the firmware zip?
when you used the ruu.exe to return back to stock did you check the wifi and bluetooth then?
try again flashing the boot.img of the rom via fastboot command
Click to expand...
Click to collapse
I didn't use ruu.exe, i flashed 3.33 ROM.zip via 4EXT. So i try some RUU 3.33...

PitnerT said:
I didn't use ruu.exe, i flashed 3.33 ROM.zip via 4EXT. So i try some RUU 3.33...
Click to expand...
Click to collapse
now it makes sense
that's why you bricked your device before
never use the writesecureflag command before using any ruu.exe
you should know that
note: no need to return to S-ON
just keep the S-OFF status

rzr86 said:
now it makes sense
that's why you bricked your device before
never use the writesecureflag command before using any ruu.exe
you should know that
note: no need to return to S-ON
just keep the S-OFF status
Click to expand...
Click to collapse
this will be ok? Official RUU-Pyramid-ICS-hTC-Europe-3.33.401.5 RUU-Pyramid-ICS-hTC-Europe-3.33.401.6-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-266171-signed.exe
Anyway, thanks

PitnerT said:
this will be ok? Official RUU-Pyramid-ICS-hTC-Europe-3.33.401.5 RUU-Pyramid-ICS-hTC-Europe-3.33.401.6-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-266171-signed.exe
Anyway, thanks
Click to expand...
Click to collapse
it is fine

rzr86 said:
it is fine
Click to expand...
Click to collapse
Okay, RUU said Error 113

PitnerT said:
Okay, RUU said Error 113
Click to expand...
Click to collapse
Fastboot getvar all
Hide imei and sn.

nlooooo said:
Fastboot getvar all
Hide imei and sn.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1111
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: xxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: T-MOB004
(bootloader) battery-status: good
(bootloader) battery-voltage: 4019mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.488s

Problem with Custom Roms

Hi there i tested these ROMS on mine HTC One S Ville S4 (International).
Here the Results:
Maximus 10.0.0 - http://forum.xda-developers.com/showthread.php?t=2445392
I´ve followed all steps but no luck, the phone reach splash screen and all i get is all 3 lights on the bottom and a green on the top illuminated.
LIBERTY ROM - The Sixth Element 4.4.2/4.4.3
Almost the same situation with Maximus Rom but with Black splash screen this time on the 2 versions of this Rom
At the moment i have the ViperOneS 3.2.0 but i would like test other Roms.
Here my specs:
----> Start <----
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.13.0000
(bootloader) version-baseband: 0.16.31501S.17_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: SH24PW******
(bootloader) imei: ***************
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__304
(bootloader) battery-status: good
(bootloader) battery-voltage: 3873mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d92cc658
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.071s
----> End <----

you need a specific hboot to try the rom. i think is 2.15 and you have 1.13.. so..... i think that is the problem.

first of all you'd update all that is possible to lates ver. (hboot, recovery), may be you should try hboot 2.16 and roms for it...

grorg said:
first of all you'd update all that is possible to lates ver. (hboot, recovery), may be you should try hboot 2.16 and roms for it...
Click to expand...
Click to collapse
No luck with RUUs

vic_111 said:
No luck with RUUs
Click to expand...
Click to collapse
You will need to update HBOOT to version 2.15 or 2.16 depending on which rom you want to install. HTC__304 is Europe/Spain so the Europe RUU should be fine for you. Its pretty easy:
Download FIRMWARE HBOOT 2.15
Extract the included recovery and flash it using fastboot:
fastboot flash recovery recovery.img
Relock your bootloader (in case it's actually locked)
fastboot oem lock
Then flash the firmware215.zip:
fastboot oem rebootRUU
fastboot flash zip firmware215.zip
fastboot flash zip firmware215.zip (First time you probably get an error, so just retype the command!!!)
fastboot reboot-bootloader (to get back into bootloader mode)

LS.xD said:
You will need to update HBOOT to version 2.15 or 2.16 depending on which rom you want to install. HTC__304 is Europe/Spain so the Europe RUU should be fine for you. Its pretty easy:
Download FIRMWARE HBOOT 2.15
Extract the included recovery and flash it using fastboot:
fastboot flash recovery recovery.img
Relock your bootloader (in case it's actually locked)
fastboot oem lock
Then flash the firmware215.zip:
fastboot oem rebootRUU
fastboot flash zip firmware215.zip
fastboot flash zip firmware215.zip (First time you probably get an error, so just retype the command!!!)
fastboot reboot-bootloader (to get back into bootloader mode)
Click to expand...
Click to collapse
He's S-On, are you sure it'll work like this? Flashing firmware is not possible unless you're S-Off. He should first try to achieve S-Off via rumrunner or other method (since he's already using Viper or a close-to-stock ROM). Then he might try flashing 2.15/2.16 firmware

Rapier said:
He's S-On, are you sure it'll work like this? Flashing firmware is not possible unless you're S-Off. He should first try to achieve S-Off via rumrunner or other method (since he's already using Viper or a close-to-stock ROM). Then he might try flashing 2.15/2.16 firmware
Click to expand...
Click to collapse
I'm sure. Flashing "SIGNED" zips will totally work with S-ON.

LS.xD said:
I'm sure. Flashing "SIGNED" zips will totally work with S-ON.
Click to expand...
Click to collapse
I will give it a try , hope I don't get a brick
But I have two questions:
1What you mean "locked" I have my boot loader unlocked!
When I finish the flash process I can unlock again?
Sent from my HTC One S

vic_111 said:
I will give it a try , hope I don't get a brick
But I have two questions:
1What you mean "locked" I have my boot loader unlocked!
When I finish the flash process I can unlock again?
Sent from my HTC One S
Click to expand...
Click to collapse
You can unlock it at any time, but you will have to lock it before upgrade the firmware.

LS.xD said:
You can unlock it at any time, but you will have to lock it before upgrade the firmware.
Click to expand...
Click to collapse
No luck, upgraded sucessfully but now i have a blank screen blinking
Update: Should i update to 2.16? If yes where i can get it?
Update URGENT: I cant install any rom now help please
Update 2: I tried install 2.16 but unsucessfull
Update 3:Anyone can find a RUU for me , because i cant :crying:
Update 4: Well i am on ViperOneS again , somehow (flashed boot.img before aroma-installer),but i would like test Liberty one you think you can send me hboot 2.16 signed , i tried find but only for s-off
Update 5 [LAST ONE]: Finally i get it Liberty Rom works 100% thanks for all the help guys , REALLY!!!

vic_111 said:
No luck, upgraded sucessfully but now i have a blank screen blinking
Update: Should i update to 2.16? If yes where i can get it?
Update URGENT: I cant install any rom now help please
Update 2: I tried install 2.16 but unsucessfull
Update 3:Anyone can find a RUU for me , because i cant :crying:
Update 4: Well i am on ViperOneS again , somehow (flashed boot.img before aroma-installer),but i would like test Liberty one you think you can send me hboot 2.16 signed , i tried find but only for s-off
Click to expand...
Click to collapse
Update 5 [LAST ONE]: Finally i get it Liberty Rom works 100% thanks for all the help guys , REALLY!!!

vic_111 said:
No luck, upgraded sucessfully but now i have a blank screen blinking
Update: Should i update to 2.16? If yes where i can get it?
Update URGENT: I cant install any rom now help please
Update 2: I tried install 2.16 but unsucessfull
Update 3:Anyone can find a RUU for me , because i cant :crying:
Update 4: Well i am on ViperOneS again , somehow (flashed boot.img before aroma-installer),but i would like test Liberty one you think you can send me hboot 2.16 signed , i tried find but only for s-off
Update 5 [LAST ONE]: Finally i get it Liberty Rom works 100% thanks for all the help guys , REALLY!!!
Click to expand...
Click to collapse
I'm glad you finally made it. HBOOT 2.16 works with S-OFF only, thats why I uploaded 2.15. As @Rapier mentioned earlier, you can use rumrunner.us for easily getting S-OFF

Mind you that hboot 2.16 gives you shared internal storage. E.g. all free space is available to all partitions. This may come tot be necessary for you if flashing lollipop roms since the "foot print" of installed aps on lollipop becomes much larger. This has to do with runtime environment... Kitkat runs with Dalvik Cache whereas Lollipop runs with the Android Runtime aka ART.
So, staying on hboot 2.15 give you the old partition layout with approx. 1 GByte(??) free for apps and 7 as internal SD.
While hboot 2.16 serves all your free internal storage to all partitions. This saves you headache of internal space for apps running out.
(Someone may deel to fill in the technical gaps i left in)
Cheers , happy hboot 2.16 user.
Verstuurd vanaf mijn One S met Tapatalk