Database Info

I need assistance on how to get back to my stock Gingerbread ROM. HTC Sensation XE

I have my HTC Sensation XE which has originally the 2.3.4 Gingerbread.
I would like to have an assistance on how to do it?
Do I need to flash specific firmwares? Where could I get it? and is it safe to use the backup I made before with that Gingerbread Rom?
Thank you.
I used SUPERCID method.. Therefore I'm not exactly sure whats my CID number and RUU but im pretty sure its either HTC__038 or HTC__044 asia or wwe_asia.
If it helps , I had some Starhub apps, Singtel or whatever, so I assume its more of an HTC__044 CID number?
Thank you.

If you did superCID you don't need to worry about which ruu you use. There is a stock GB ruu link in the s-on section of the sticky guide to everything in the dev forum.
Sent from my HTC Pyramid using xda premium

stringer7 said:
If you did superCID you don't need to worry about which ruu you use. There is a stock GB ruu link in the s-on section of the sticky guide to everything in the dev forum.
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
Thank you for the response. But im trying to get the OTA also.
That's why I want to be sure about my RUU. and CID ^^, Thank you.

ardom said:
Thank you for the response. But im trying to get the OTA also.
That's why I want to be sure about my RUU. and CID ^^, Thank you.
Click to expand...
Click to collapse
OK, you can find your original cid by entering "getprop ro.cid" in terminal emulator.
Sent from my HTC Pyramid using xda premium

stringer7 said:
OK, you can find your original cid by entering "getprop ro.cid" in terminal emulator.
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
I had changed my CID when i rooted mine i used supercid method and changed it to 11111111 i forgot my original ru. Im nt sure exactly too if its wwe_asia or asia but im sure its either of the two. I had Starhub app too so i have a premonition that it could be htc__044 or asiawwe singapore version.
Im confused lol. I Want to go back to my stock ruu and cid. Or least the cid so i could restore my backup if possible. Then if ever i ota update. Less prblems could be encountered.
Sent from my HTC Sensation XE with Beats Audio

What are the steps I need to do?
Which to flash? any firmware?
THank you.

This is a prime example of making sure you check for the RUU BEFORE you flash anything new
Do what is said above and it will tell you your original CID. We can then see if we can find the RUU

Good luck. I just updated my xe to ics by simply reading a lot of posts on this site. And simply following all instructions.
At first tho, I mistakenly flashed sensation and not sensation xe. But again, found the correct files here on this site. All sorted and now have beats audio back, now with sense and ics latest.
So many helpful people here, so I hope you too get your fine sorted to the way you want yours. Although curious as to why you wanna go back to gb.
Surely ics is better?
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA

hi
hi guys, do you have any link for official Gingerbread RUU 1.73 with beats audio for sensation XE? i just turn my sensation XE to s-on and flash the RUU but i flashed a wrong ruu.thanks guys.i want to update my sensation XE to ics through system update

Are you S-ON again now? If so, you'll need to S-OFF before you can flash the XE RUU (which you can find here):
https://www.yousendit.com/download/M3BtWmd2YWJ6NE5qQTlVag

Its already 1111111 for my CID. Im planning to go back to stock gb so i can get the ota ics and try it out.
Sent from my HTC Sensation XE with Beats Audio

Yes my phone is s-on again, so how do I flash the ruu?and just s-off? No need to do rooting?thanks

Help ~ Loop boot
I was gonna revert to my stock Gingerbread 2.3.4, I was trying to achieve ICS 4.x and Cyanogen mod 9, but I n00bed it up and wound up in a boot loop. I've read several different tutorials and I gathered I need to flash back to Stock GB. Do I just need a link to a Stock GB that fits my CID?
CID = T-MOB010
No Super CID
No RUU
Thanks much

soldierforus said:
I was gonna revert to my stock Gingerbread 2.3.4, I was trying to achieve ICS 4.x and Cyanogen mod 9, but I n00bed it up and wound up in a boot loop. I've read several different tutorials and I gathered I need to flash back to Stock GB. Do I just need a link to a Stock GB that fits my CID?
CID = T-MOB010
No Super CID
No RUU
Thanks much
Click to expand...
Click to collapse
yes yes stock GB would do ..also ..you have stock ICS for that cid too want that ?
GB RUU for TMOB USA
ICS RUU for TMOB USA (post #1 section #3 has the link to RUU's)
but
care to explain more what happened ?..it probably might be a small solution
small details would do ..
complete details present in the bootscreen (a screenshot would do too)
also
a complete output of the following command (except IMEI and serail number)
fastboot getvar all
then i can give you a perfect solution

ganeshp said:
yes yes stock GB would do ..also ..you have stock ICS for that cid too want that ?
GB RUU for TMOB USA
ICS RUU for TMOB USA (post #1 section #3 has the link to RUU's)
but
care to explain more what happened ?..it probably might be a small solution
small details would do ..
complete details present in the bootscreen (a screenshot would do too)
also
a complete output of the following command (except IMEI and serail number)
fastboot getvar all
then i can give you a perfect solution
Click to expand...
Click to collapse
Sorry to double post, I thought this may be a dead thread since the previous post had a question and no reply in 4 months.
_____________________________________________
The Details:
Boot loop began after I flashed to firmware 3.32 using:
Universal Firmware 3.32 Universal (Non-TMOUS): Since I am on TMO, I gather I should have used the TMOUS flash?
DOWNLOAD: http://d-h.st/afS
MD5: 8f50e9f4f3fab7edcd4013015703f81c
From this tutorial: http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
I later I found a cynaogen tutorial to help with boot loop and followed these steps:
1) Set to factory reset
2)Cleared Delvick (sp?) Cache
____________________________________________
Current Boot Screen:
Revolutionary
Pyramid PVT SHIP S-OFF RL
HBOOT 1.27.1100
RADIO-11.22.3504.07_M
OpenADSP-v02. 6. 0. 226.00.0131
eMMC-boot
_____________________________________________
Getvar all Results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.22.3504.07_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.401.3
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3816mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.490s
So how do the RUU's function exactly? I read the glossary term in wiki, but I don't fully understand the concept. They will update my ROM through window? I guess I need to be able to kill this boot loop first though.
Thanks again

soldierforus said:
Sorry to double post, I though this may be a dead thread since the previous post had a question and no reply in 4 months.
_____________________________________________
The Details:
Boot loop began after I flashed to firmware 3.32 using:
Universal Firmware 3.32 Universal (Non-TMOUS): Since I am on TMO, I gather I should have used the TMOUS flash?
DOWNLOAD: http://d-h.st/afS
MD5: 8f50e9f4f3fab7edcd4013015703f81c
From this tutorial: http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
I later found a cynaogen turoial to help with bootloop and followed these steps:
1) Set to factory reset
2)Cleared Delvick (sp?) Cache
____________________________________________
Current Boot Screen:
Revolutionary
Pyramid PVT SHIP S-OFF RL
HBOOT 1.27.1100
RADIO-11.22.3504.07_M
OpenADSP-v02. 6. 0. 226.00.0131
eMMC-boot
_____________________________________________
Getvar all Results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.22.3504.07_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.401.3
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3816mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.490s
So How the RUU's function exactly. They will update my ROM through window? I guess I need to be able to kill this boot loop first though.
Thanks again
Click to expand...
Click to collapse
for RUU ..you need to connect the phone in bootloader to pc ..and then just double click on it ...that will do
one last try for flashing custom rom ..still not worked then go for RUU
btw what recovery you are using ?
if using cwm ...can you switch to 4EXT recovery ?
get the recovery image from the below db link (recovery.img inside the zip)
4EXT DB link
and flash it via fastboot
fastboot flash recovery recovery.img
got to the recovery
4EXT->wipe|format->format all partitions except sdcard
then back to main menu ...and flash the rom (what ever custom rom you want)
then reboot and see..if it still stuck at boot logo
then extract the boot.img from the rom zip file
and flash it manually
fastboot flash boot boot.img
then reboot
still stuck ?
then reflash the firmware (be sure to check the md5 of the firmware you have downloaded)
still stuck?
then RUU

No-Go
ganeshp said:
for RUU ..you need to connect the phone in bootloader to pc ..and then just double click on it ...that will do
one last try for flashing custom rom ..still not worked then go for RUU
btw what recovery you are using ?
if using cwm ...can you switch to 4EXT recovery ?
get the recovery image from the below db link (recovery.img inside the zip)
4EXT DB link
and flash it via fastboot
fastboot flash recovery recovery.img
got to the recovery
4EXT->wipe|format->format all partitions except sdcard
then back to main menu ...and flash the rom (what ever custom rom you want)
then reboot and see..if it still stuck at boot logo
then extract the boot.img from the rom zip file
and flash it manually
fastboot flash boot boot.img
then reboot
still stuck ?
then reflash the firmware (be sure to check the md5 of the firmware you have downloaded)
still stuck?
then RUU
Click to expand...
Click to collapse
So it wouldn't let me flash 4ext, it says: "cannot load 'recovery.img'" I didn't unzip it or even leave the zip in the root, I took only the recovery.img and left it in to sd root.
You said to flash the custom ROM, but this is my first attempt, and although I have downloaded CM9, the instructions I have read from other tutorials tell me I have to upgrade first to firmware 3.32, then to firmware 3.33, then I can install CM9, which will give me ICS/4.x Am I correct so far?
I don't even know if the 3.32 flash was a success (Do you?) since now I am in a boot loop. Could it be because I should have used the TMOUS instead of the non-TMOUS universal for 3.32? I picked the non-TMOUS because I didn't realize what TOUS stood for at the time, and the other link said universal (and the android-info had my cid/mid)
Also thanks for the RUU links, but I don't know what good the ICS will do if I don't have it yet. Those RUU's will do what exactly? Update to the latest ROM ? Also, is that for all roms or just 3rd party? Looking at the getvar log I sent you, I gather the 3.32 did work, So I should download the ICS 3.32 RUU link you sent me. That's what I am going to try now
EDIT
________________________________
I re-installed cm9, AND EUREKA!!!!!! My first custom ROM. Many thanks to all who helped! Now which RUU do I use, and how often should I run it?

soldierforus said:
So it wouldn't let me flash 4ext, it says: "cannot load 'recovery.img'" I didn't unzip it or even leave the zip in the root, I took only the recovery.img and left it in to sd root.
You said to flash the custom ROM, but this is my first attempt, and although I have downloaded CM9, the instructions I have read from other tutorials tell me I have to upgrade first to firmware 3.32, then to firmware 3.33, then I can install CM9, which will give me ICS/4.x Am I correct so far?
I don't even know if the 3.32 flash was a success (Do you?) since now I am in a boot loop. Could it be because I should have used the TMOUS instead of the non-TMOUS universal for 3.32? I picked the non-TMOUS because I didn't realize what TOUS stood for at the time, and the other link said universal (and the android-info had my cid/mid)
Also thanks for the RUU links, but I don't know what good the ICS will do if I don't have it yet. Those RUU's will do what exactly? Update to the latest ROM ? Also, is that for all roms or just 3rd party? Looking at the getvar log I sent you, I gather the 3.32 did work, So I should download the ICS 3.32 RUU link you sent me. That's what I am going to try now
EDIT
________________________________
I re-installed cm9, AND EUREKA!!!!!! My first custom ROM. Many thanks to all who helped! Now which RUU do I use, and how often should I run it?
Click to expand...
Click to collapse
RUU is rom update utility.. It's official htc file
Ruu is complete software for your phone
It wipes everything.. Rom, recovery firmware.. Everything and flashes the corresponding stock One...
So when you run ics ruu.. You will have complete ics stock rom of tmobile US
And the recovery flash you did earlier was wrong..
You need to keep that recovery file in the adb folder (it should be in pc) Then the command will fetch the file.. As you have kept it on top of sdcard.. It can't find it..
Sent from my pyramid.. Through blazing fast sonic waves

Can't flash JB roms on HTC One S C2

First of, a bunch of thanks to you for helping me get from a complete and utter noob to a just complete noob. Managed to root, install roms and get out of a LOT of soft bricks (i just don't give up!) with your awesome help, all by searching older posts. However, this time i find myself in a pickle.
I own an HTC One S C2 with Hboot 2.0.9, had stock ICS when i bought it with no option to update to JB (which is why i rooted it in the first place). Something about this particular version of the phone not being updated by HTC global, which i found out about after i bought it, duh. Anyway. I've tried installing JB roms from this thread http://forum.xda-developers.com/showthread.php?t=2239265 with no luck. Phone just keeps getting into HTC logo screen loops. Right now i am on backtobasics v3 rom. Here's how i tried installing them JB roms and also the rom i am using right now (using TWRP 2.4.1 because newest version wouldn't work with backtobasics rom):
(note: some roms had sliiiightly different directions, i just followed each and every one's description closely)
1) Download Rom.zip
2) Extract boot.img from Rom.zip to fastboot folder
3) Enter Recovery
4) Mount SD card
5) Copy Rom.zip to SD card
6) Unmount
7) Wipe data, system, cache, dalvik cache and factory reset
8) Install Rom.zip
9) Reboot Bootloader
10) Go to fastboot USB mode
11) dem commands: fastboot flash boot boot.img then fastboot erase cache then fastboot reboot
12) BOOM! HTC LOGO LOOPS!
I've also tried installing a RUU but i couldn't find any for my CID. Then i thought about getting a SuperCID but, frankly, i scrached that thought the minute i saw the how to do it thread. Here's the phone info
version-bootloader: 2.09.0001
version-baseband: 16.05.20.24_M
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: FA335W400602
imei: 352911052281278
product: villec2
platform: HBOOT-8260
modelid: PJ4021000
cidnum: BSTAR301
battery-status: good
battery-voltage: 4170mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: f616909f
hbootpreupdate: 11
gencheckpt: 0
Thank you, in advance, for any advice you may be able to provide me with

Mkay, since i got no answer i went back to searching again! Unfortunately, i still have no asolution to my problem
From what i understand i have to: find a RUU to get from android version 4.0.3 up to JB version. Then i will be able to flash JB roms. But there is no RUU for CID BSTAR301.
I did find a thread with nandroid backup for a BSTAR301 which updates the version without a RUU but it was for HTC One X, i guess i shouldn't use that at all.
I am thinking about doing a SuperCID to install a RUU, then get back to my actual CID and flash a custom JB rom..
Would appreciate any advice

Tateh said:
Mkay, since i got no answer i went back to searching again! Unfortunately, i still have no asolution to my problem
From what i understand i have to: find a RUU to get from android version 4.0.3 up to JB version. Then i will be able to flash JB roms. But there is no RUU for CID BSTAR301.
I did find a thread with nandroid backup for a BSTAR301 which updates the version without a RUU but it was for HTC One X, i guess i shouldn't use that at all.
I am thinking about doing a SuperCID to install a RUU, then get back to my actual CID and flash a custom JB rom..
Would appreciate any advice
Click to expand...
Click to collapse
Yes, in your case S-OFF, Changing CID to something which has a JB RUU would do the trick. I think SuperCID is not necessary.
Sent from my Nexus 7 using Tapatalk HD

heakit Purpose
khan.orak said:
Yes, in your case S-OFF, Changing CID to something which has a JB RUU would do the trick. I think SuperCID is not necessary.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
THANK you! Currently trying to S-OFF it!

Tateh said:
THANK you! Currently trying to S-OFF it!
Click to expand...
Click to collapse
did you get S-OFF?

Not yet.. So exhausted. I tried the moonshine method but, just like trhe instructions state, i should have JB and be on stock for it to work properly, which is not possible since my phone has a BSTAR301 CID and is stuck on 4.0.3 with no stock roms available.
From what i've read, my only hope of S-OFF is to wait for the fellas working on Revolutionary method for S-OFF to release the correct version for this phone. I just hope it's soon and I thank them for their efforts, i'm so disappointed at this phone

Tateh said:
Not yet.. So exhausted. I tried the moonshine method but, just like trhe instructions state, i should have JB and be on stock for it to work properly, which is not possible since my phone has a BSTAR301 CID and is stuck on 4.0.3 with no stock roms available.
From what i've read, my only hope of S-OFF is to wait for the fellas working on Revolutionary method for S-OFF to release the correct version for this phone. I just hope it's soon and I thank them for their efforts, i'm so disappointed at this phone
Click to expand...
Click to collapse
same here. I just wrote to them asking for that

S-OFF done
I did S-OFF already. Now i need to know what CID put in my phone?? and which RUU install on it??
My MID is: PJ4021000
so i don't know if the Europe RUU's work in my phone. Maybe the radio have problem or no?? because the RUU say MID version: PJ4020000. Someone knows about this??

I have heard that JB update for BSTAR is now available.
Sent from my HTC One S using Tapatalk 4 Beta

khan.orak said:
I have heard that JB update for BSTAR is now available.
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yeah it's done. But I would change CID not have to wait for another update Brightstar in so long.

gustavoegg said:
Yeah it's done. But I would change CID not have to wait for another update Brightstar in so long.
Click to expand...
Click to collapse
Be sure to match MID or you'll end up having problems with future updates.
Sent from my HTC One S using Tapatalk 4 Beta

Episcopal yupdfir
khan.orak said:
Be sure to match MID or you'll end up having problems with future updates.
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
Where i can find a RUU for Model ID: PJ4021000?? Because i need update for OTA after install the RUU

gustavoegg said:
Where i can find a RUU for Model ID: PJ4021000?? Because i need update for OTA after install the RUU
Click to expand...
Click to collapse
You have to manually check the ANDROID-INFO.TXT to match CID + MID
Sent from my HTC One S using Tapatalk 4 Beta

Tateh said:
First of, a bunch of thanks to you for helping me get from a complete and utter noob to a just complete noob. Managed to root, install roms and get out of a LOT of soft bricks (i just don't give up!) with your awesome help, all by searching older posts. However, this time i find myself in a pickle.
I own an HTC One S C2 with Hboot 2.0.9, had stock ICS when i bought it with no option to update to JB (which is why i rooted it in the first place). Something about this particular version of the phone not being updated by HTC global, which i found out about after i bought it, duh. Anyway. I've tried installing JB roms from this thread http://forum.xda-developers.com/showthread.php?t=2239265 with no luck. Phone just keeps getting into HTC logo screen loops. Right now i am on backtobasics v3 rom. Here's how i tried installing them JB roms and also the rom i am using right now (using TWRP 2.4.1 because newest version wouldn't work with backtobasics rom):
(note: some roms had sliiiightly different directions, i just followed each and every one's description closely)
1) Download Rom.zip
2) Extract boot.img from Rom.zip to fastboot folder
3) Enter Recovery
4) Mount SD card
5) Copy Rom.zip to SD card
6) Unmount
7) Wipe data, system, cache, dalvik cache and factory reset
8) Install Rom.zip
9) Reboot Bootloader
10) Go to fastboot USB mode
11) dem commands: fastboot flash boot boot.img then fastboot erase cache then fastboot reboot
12) BOOM! HTC LOGO LOOPS!
I've also tried installing a RUU but i couldn't find any for my CID. Then i thought about getting a SuperCID but, frankly, i scrached that thought the minute i saw the how to do it thread. Here's the phone info
version-bootloader: 2.09.0001
version-baseband: 16.05.20.24_M
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: FA335W400602
imei: 352911052281278
product: villec2
platform: HBOOT-8260
modelid: PJ4021000
cidnum: BSTAR301
battery-status: good
battery-voltage: 4170mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: f616909f
hbootpreupdate: 11
gencheckpt: 0
Thank you, in advance, for any advice you may be able to provide me with
Click to expand...
Click to collapse
Hi, I have same problem with you. Have you got any solution?

Unfortunately not yet, I switched back to my old xperia ray while i wait for the revolutionary team to release a version for HTC One S

[Help] need backup or boot.img for sensation

Hello,
I'm looking for sensation's backup or boot.img for mainver 3.33.707.51 and HTC__044 CID
Urgently !
Thank's

octopus82 said:
Hello,
I'm looking for sensation's backup or boot.img for mainver 3.33.707.51 and HTC__044 CID
Urgently !
Thank's
Click to expand...
Click to collapse
what did you do exactly?
post also your bootloader info pls

rzr86 said:
what did you do exactly?
post also your bootloader info pls
Click to expand...
Click to collapse
I've flashed another boot.img, for old version then I have error wifi
and I think that the device run with an custom rom with s-on
bootloader 1.27
Thank's

octopus82 said:
I've flashed another boot.img, for old version then I have error wifi
and I think that the device run with an custom rom with s-on
bootloader 1.27
Thank's
Click to expand...
Click to collapse
just download the rom you have
extract the boot.img and flash it via fastboot command

rzr86 said:
just download the rom you have
extract the boot.img and flash it via fastboot command
Click to expand...
Click to collapse
I CAN'T FIND MY VERSION DUDE
so I hope if some one have it or can make an backup to help me
Thank's

octopus82 said:
I CAN'T FIND MY VERSION DUDE
so I hope if some one have it or can make an backup to help me
Thank's
Click to expand...
Click to collapse
actually mate we have to know what rom you have
the only thing i can tell you now is to flash a custom rom from recovery
edit: go to phone info
maybe it is says something there

rzr86 said:
actually mate we have to know what rom you have
the only thing i can tell you now is to flash a custom rom from recovery
edit: go to phone info
maybe it is says something there
Click to expand...
Click to collapse
I'm on s-on and I can't go on s-off, I have error issu everytime with JB method
another solution please ?

octopus82 said:
I'm on s-on and I can't go on s-off, I have error issu everytime with JB method
another solution please ?
Click to expand...
Click to collapse
you confused me now
do you have wifi error or are you trying to S-OFF?
if you have trouble with jb method say what error you have

rzr86 said:
you confused me now
do you have wifi error or are you trying to S-OFF?
if you have trouble with jb method say what error you have
Click to expand...
Click to collapse
I have wifi error, et and I'm trying to s-off to change cid cause I can't find my mainver rom
version: 0.5
version-bootloader: 1.27.0000
version-baseband: 11.24A.3504.31_M
version-cpld: None
version-microp: None
version-main: 3.33.707.51
serialno: ###############
imei: ################
product: pyramid
platform: HBOOT-8260
modelid: PG5813000
cidnum: HTC__044
battery-status: good
battery-voltage: 4148mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11

octopus82 said:
I have wifi error, et and I'm trying to s-off to change cid cause I can't find my mainver rom
version: 0.5
version-bootloader: 1.27.0000
version-baseband: 11.24A.3504.31_M
version-cpld: None
version-microp: None
version-main: 3.33.707.51
serialno: ###############
imei: ################
product: pyramid
platform: HBOOT-8260
modelid: PG5813000
cidnum: HTC__044
battery-status: good
battery-voltage: 4148mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11
Click to expand...
Click to collapse
ok then in order to S-OFF you must have stock rom in your device
you can use the flashable zip(link in my signature)
otherwise you can use the appropriate ruu.exe for your device
see this thread
http://forum.xda-developers.com/showthread.php?t=1672425
relock first the bootloader(if it is unlocked)

rzr86 said:
ok then in order to S-OFF you must have stock rom in your device
you can use the flashable zip(link in my signature)
)
Click to expand...
Click to collapse
flashble with s-on ?!

rzr86 said:
if you have trouble with jb method say what error you have
Click to expand...
Click to collapse
S-OFF Failed
Errorcode: 66732337
ErrorMsg: Still sober
when I do a wire strike the sd card not working after that

I've found this in htcdev/download
http://dl4.htc.com/RomCode/Source_and_Binaries/pyramid-ics-crc-3.0.16-8626210.zip
it's a file for mu mainver
I've flashed it with PG58IMG.zip from bootloader with sd card, but still wifi error
Can somebody tell if I can excrat an firmware.zip from this file ?
Thank's

octopus82 said:
flashble with s-on ?!
Click to expand...
Click to collapse
yes you can
just put it in your sdcard
boot your device into recovery(i suggest to install 4ext recovery if you don't have it already)
format all partitions from except sdcard from 4ext
enable smartflash from 4ext(because you are on S-ON)
flash the rom
octopus82 said:
S-OFF Failed
Errorcode: 66732337
ErrorMsg: Still sober
when I do a wire strike the sd card not working after that
Click to expand...
Click to collapse
format your sdcard or try with a different one
octopus82 said:
I've found this in htcdev/download
http://dl4.htc.com/RomCode/Source_and_Binaries/pyramid-ics-crc-3.0.16-8626210.zip
it's a file for mu mainver
I've flashed it with PG58IMG.zip from bootloader with sd card, but still wifi error
Can somebody tell if I can excrat an firmware.zip from this file ?
Thank's
Click to expand...
Click to collapse
you can't flash firmware while on S-ON
did you try to use any ruu.exe?

rzr86 said:
yes you can
just put it in your sdcard
boot your device into recovery(i suggest to install 4ext recovery if you don't have it already)
format all partitions from except sdcard from 4ext
enable smartflash from 4ext(because you are on S-ON)
flash the rom
format your sdcard or try with a different one
you can't flash firmware while on S-ON
did you try to use any ruu.exe?
Click to expand...
Click to collapse
Thank you very very much dude, I'll never forget your help
The problem is solved

octopus82 said:
Thank you very very much dude, I'll never forget your help
The problem is solved
Click to expand...
Click to collapse
wifi is working mate?

rzr86 said:
wifi is working mate?
Click to expand...
Click to collapse
evreything work perfectly
Thank's

[Q] Super CID and S-OFF not working (3.16.111.10, HBOOT 2.15)

Hey Everyone,
after I nearly bricked my One S4, I now would like to flash any custom rom.
Unfortunately, I can't change my CID to 11111111 and also I can't get S-off.
I tried / made the following:
1. I got root & unlock.
2. I tried to change the CID with ADB-push etc. - for some strange reason, I can write the changed mmcblk0p4 to the dev-folder, but immediately after I have written it (no write error!) and if I reopen it - no matter with a root explorer or by pulling it via ADB it has not changed.
I also tried to copy the file from the SD with a root explorer to the folder - same thing, copy works and immediately after it, the old CID is inside.
3. For obtaining S-off I tried all available options, the appropriate version of Moonshine (which stucks with pages and pages of dots - as far as I remember after step 3) and also Rumrunner 0.5 - which says I should update to a newer version.
Facepalm is no option as it is only for SuperCID.
Has anyone an Idea what I could do?
Here is additionaly the fastboot getvar all:
Code:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.15.50.05.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ...............
(bootloader) imei: ..............
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4181mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.089s
Regards & thanks,
Matthias

http://forum.xda-developers.com/showthread.php?t=2558334
Sent from my One S using XDA Premium 4 mobile app

Bad.Fish said:
http://forum.xda-developers.com/showthread.php?t=2558334
Sent from my One S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope - I told already in my first post:
3. For obtaining S-off I tried all available options, the appropriate version of Moonshine (which stucks with pages and pages of dots - as far as I remember after step 3) and also Rumrunner 0.5 - which says I should update to a newer version.
Click to expand...
Click to collapse
Any other ideas?

I was in your shoes until I found the link I posted. Maybe you didn't follow directions for rumrunner properly. Use rumrunner downloads from that link and try again. Won't hurt
Sent from my One S using XDA Premium 4 mobile app

Bad.Fish said:
I was in your shoes until I found the link I posted. Maybe you didn't follow directions for rumrunner properly. Use rumrunner downloads from that link and try again. Won't hurt
Sent from my One S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have the same problem. I can't get S-OFF after unlocking bootloader and rooting. Same Hboot (2.15), tried rumrunner: on Windows it says I need to download updated version, on Ubuntu it won't go past pouring (1). Also tried firewater without success.
I was going to flash ViperOne S 3.2.0 after getting S-OFF. Should I try to flash it before getting S-OFF? Thanks for help!
(My software version is 3.16.401.10)

ZioRò said:
I have the same problem. I can't get S-OFF after unlocking bootloader and rooting. Same Hboot (2.15), tried rumrunner: on Windows it says I need to download updated version, on Ubuntu it won't go past pouring (1). Also tried firewater without success.
I was going to flash ViperOne S 3.2.0 after getting S-OFF. Should I try to flash it before getting S-OFF? Thanks for help!
(My software version is 3.16.401.10)
Click to expand...
Click to collapse
I have flashed 3.1.3 yesterday with a unlocked device and then extracted the hboot2.15 from this rom and flashed it afterwards again.
It runs so far good!
And this with S-On and without SuperCID.
The Hboot is in the folder "kernel" of the ZIP file.
Nevertheless - S-Off and SuperCID would be cool.
BTW - I tried rumrunner again (3-4 times) with a very detailled following up of the requirements listed on the website etc. Did still not work.
Regards,
Maeffjus

Maeffjus said:
I have flashed 3.1.3 yesterday with a unlocked device and then extracted the hboot2.15 from this rom and flashed it afterwards again.
It runs so far good!
And this with S-On and without SuperCID.
The Hboot is in the folder "kernel" of the ZIP file.
Nevertheless - S-Off and SuperCID would be cool.
BTW - I tried rumrunner again (3-4 times) with a very detailled following up of the requirements listed on the website etc. Did still not work.
Regards,
Maeffjus
Click to expand...
Click to collapse
Did you flash directly from TWRP? Thanks!

ZioRò said:
Did you flash directly from TWRP? Thanks!
Click to expand...
Click to collapse
The ROM yes, the boot is a img file - you have flash it with fastboot (fastboot flash boot xxxhbootxxx.img - however the file name is)

Maeffjus said:
The ROM yes, the boot is a img file - you have flash it with fastboot (fastboot flash boot xxxhbootxxx.img - however the file name is)
Click to expand...
Click to collapse
Managed to flash the rom! It's awesome, so many customizations available
Anyway, I'll try to S-Off again and let you know..

Maeffjus said:
I have flashed 3.1.3 yesterday with a unlocked device and then extracted the hboot2.15 from this rom and flashed it afterwards again.
It runs so far good!
And this with S-On and without SuperCID.
The Hboot is in the folder "kernel" of the ZIP file.
Nevertheless - S-Off and SuperCID would be cool.
BTW - I tried rumrunner again (3-4 times) with a very detailled following up of the requirements listed on the website etc. Did still not work.
Regards,
Maeffjus
Click to expand...
Click to collapse
I finally managed to get S-Off some days ago. It was just due to my antivirus, Bitdefender. Even though I disabled it, any way to s-off wouldn't work. Uninstalled it and then ran Rumrunner again. Everything went fine!!

Did you try moonshine S-OFF?For your Firmware and cid no: http://moonshine.io/download/di7ki1txf7jq.html
And instructions:
http://forum.xda-developers.com/showthread.php?t=2325590

Unfortunately both did not work AGAIN - I disabled the AV software and disabled the services etc as well.
Rumrunner says Error und Moonshinhe runs forever (see attachement).
Any Ideas?

Maeffjus said:
Unfortunately both did not work AGAIN - I disabled the AV software and disabled the services etc as well.
Rumrunner says Error und Moonshinhe runs forever (see attachement).
Any Ideas?
Click to expand...
Click to collapse
Read moonshine instructions carefully and try again.

hmgurbuz said:
Read moonshine instructions carefully and try again.
Click to expand...
Click to collapse
I really really did - it is not that complicated to foolow them up - for instance, i have never ever installed the HTC Sync Manager (Laptop is one month old)

Remove all of antivirus programs.It should if you are on 3.16.111.10

Problem with Custom Roms

Hi there i tested these ROMS on mine HTC One S Ville S4 (International).
Here the Results:
Maximus 10.0.0 - http://forum.xda-developers.com/showthread.php?t=2445392
I´ve followed all steps but no luck, the phone reach splash screen and all i get is all 3 lights on the bottom and a green on the top illuminated.
LIBERTY ROM - The Sixth Element 4.4.2/4.4.3
Almost the same situation with Maximus Rom but with Black splash screen this time on the 2 versions of this Rom
At the moment i have the ViperOneS 3.2.0 but i would like test other Roms.
Here my specs:
----> Start <----
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.13.0000
(bootloader) version-baseband: 0.16.31501S.17_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: SH24PW******
(bootloader) imei: ***************
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__304
(bootloader) battery-status: good
(bootloader) battery-voltage: 3873mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d92cc658
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.071s
----> End <----

you need a specific hboot to try the rom. i think is 2.15 and you have 1.13.. so..... i think that is the problem.

first of all you'd update all that is possible to lates ver. (hboot, recovery), may be you should try hboot 2.16 and roms for it...

grorg said:
first of all you'd update all that is possible to lates ver. (hboot, recovery), may be you should try hboot 2.16 and roms for it...
Click to expand...
Click to collapse
No luck with RUUs

vic_111 said:
No luck with RUUs
Click to expand...
Click to collapse
You will need to update HBOOT to version 2.15 or 2.16 depending on which rom you want to install. HTC__304 is Europe/Spain so the Europe RUU should be fine for you. Its pretty easy:
Download FIRMWARE HBOOT 2.15
Extract the included recovery and flash it using fastboot:
fastboot flash recovery recovery.img
Relock your bootloader (in case it's actually locked)
fastboot oem lock
Then flash the firmware215.zip:
fastboot oem rebootRUU
fastboot flash zip firmware215.zip
fastboot flash zip firmware215.zip (First time you probably get an error, so just retype the command!!!)
fastboot reboot-bootloader (to get back into bootloader mode)

LS.xD said:
You will need to update HBOOT to version 2.15 or 2.16 depending on which rom you want to install. HTC__304 is Europe/Spain so the Europe RUU should be fine for you. Its pretty easy:
Download FIRMWARE HBOOT 2.15
Extract the included recovery and flash it using fastboot:
fastboot flash recovery recovery.img
Relock your bootloader (in case it's actually locked)
fastboot oem lock
Then flash the firmware215.zip:
fastboot oem rebootRUU
fastboot flash zip firmware215.zip
fastboot flash zip firmware215.zip (First time you probably get an error, so just retype the command!!!)
fastboot reboot-bootloader (to get back into bootloader mode)
Click to expand...
Click to collapse
He's S-On, are you sure it'll work like this? Flashing firmware is not possible unless you're S-Off. He should first try to achieve S-Off via rumrunner or other method (since he's already using Viper or a close-to-stock ROM). Then he might try flashing 2.15/2.16 firmware

Rapier said:
He's S-On, are you sure it'll work like this? Flashing firmware is not possible unless you're S-Off. He should first try to achieve S-Off via rumrunner or other method (since he's already using Viper or a close-to-stock ROM). Then he might try flashing 2.15/2.16 firmware
Click to expand...
Click to collapse
I'm sure. Flashing "SIGNED" zips will totally work with S-ON.

LS.xD said:
I'm sure. Flashing "SIGNED" zips will totally work with S-ON.
Click to expand...
Click to collapse
I will give it a try , hope I don't get a brick
But I have two questions:
1What you mean "locked" I have my boot loader unlocked!
When I finish the flash process I can unlock again?
Sent from my HTC One S

vic_111 said:
I will give it a try , hope I don't get a brick
But I have two questions:
1What you mean "locked" I have my boot loader unlocked!
When I finish the flash process I can unlock again?
Sent from my HTC One S
Click to expand...
Click to collapse
You can unlock it at any time, but you will have to lock it before upgrade the firmware.

LS.xD said:
You can unlock it at any time, but you will have to lock it before upgrade the firmware.
Click to expand...
Click to collapse
No luck, upgraded sucessfully but now i have a blank screen blinking
Update: Should i update to 2.16? If yes where i can get it?
Update URGENT: I cant install any rom now help please
Update 2: I tried install 2.16 but unsucessfull
Update 3:Anyone can find a RUU for me , because i cant :crying:
Update 4: Well i am on ViperOneS again , somehow (flashed boot.img before aroma-installer),but i would like test Liberty one you think you can send me hboot 2.16 signed , i tried find but only for s-off
Update 5 [LAST ONE]: Finally i get it Liberty Rom works 100% thanks for all the help guys , REALLY!!!

vic_111 said:
No luck, upgraded sucessfully but now i have a blank screen blinking
Update: Should i update to 2.16? If yes where i can get it?
Update URGENT: I cant install any rom now help please
Update 2: I tried install 2.16 but unsucessfull
Update 3:Anyone can find a RUU for me , because i cant :crying:
Update 4: Well i am on ViperOneS again , somehow (flashed boot.img before aroma-installer),but i would like test Liberty one you think you can send me hboot 2.16 signed , i tried find but only for s-off
Click to expand...
Click to collapse
Update 5 [LAST ONE]: Finally i get it Liberty Rom works 100% thanks for all the help guys , REALLY!!!

vic_111 said:
No luck, upgraded sucessfully but now i have a blank screen blinking
Update: Should i update to 2.16? If yes where i can get it?
Update URGENT: I cant install any rom now help please
Update 2: I tried install 2.16 but unsucessfull
Update 3:Anyone can find a RUU for me , because i cant :crying:
Update 4: Well i am on ViperOneS again , somehow (flashed boot.img before aroma-installer),but i would like test Liberty one you think you can send me hboot 2.16 signed , i tried find but only for s-off
Update 5 [LAST ONE]: Finally i get it Liberty Rom works 100% thanks for all the help guys , REALLY!!!
Click to expand...
Click to collapse
I'm glad you finally made it. HBOOT 2.16 works with S-OFF only, thats why I uploaded 2.15. As @Rapier mentioned earlier, you can use rumrunner.us for easily getting S-OFF

Mind you that hboot 2.16 gives you shared internal storage. E.g. all free space is available to all partitions. This may come tot be necessary for you if flashing lollipop roms since the "foot print" of installed aps on lollipop becomes much larger. This has to do with runtime environment... Kitkat runs with Dalvik Cache whereas Lollipop runs with the Android Runtime aka ART.
So, staying on hboot 2.15 give you the old partition layout with approx. 1 GByte(??) free for apps and 7 as internal SD.
While hboot 2.16 serves all your free internal storage to all partitions. This saves you headache of internal space for apps running out.
(Someone may deel to fill in the technical gaps i left in)
Cheers , happy hboot 2.16 user.
Verstuurd vanaf mijn One S met Tapatalk