[Q] Wi-Fi and Bluetooth error :( - HTC Sensation

Hi everyone, i'm new at this forum and i have very strange problem with my HTC Sensation.
My friend bought this phone, everything was ok. He unlocked bootloader with HTCdev, flashed CWM and some CM10.1 ROM (and Gapps). Wifi and Bluetooth stopped working. In settings, the switches at wifi and bluetooth was gray. If i open wifi, there was something like "Turning on..." (bluetooth was the same).
Then he gave this phone to me. I wanted to solve this problem. I flashed many ROMs, for example this: http://forum.xda-developers.com/showthread.php?t=2530073 . I tried Wifix, not working. I flashed 4EXTRecovery and tried SmartFlash. I tried flash stock ICS ROM (about 400MB zip), still not working. Then i successful do S-OFF by Juopunut. I have HBOOT-1.27.1111, RADIO-11.25A-3504.13_M.
Please, can anyone help me? :crying:

PitnerT said:
Hi everyone, i'm new at this forum and i have very strange problem with my HTC Sensation.
My friend bought this phone, everything was ok. He unlocked bootloader with HTCdev, flashed CWM and some CM10.1 ROM (and Gapps). Wifi and Bluetooth stopped working. In settings, the switches at wifi and bluetooth was gray. If i open wifi, there was something like "Turning on..." (bluetooth was the same).
Then he gave this phone to me. I wanted to solve this problem. I flashed many ROMs, for example this: http://forum.xda-developers.com/showthread.php?t=2530073 . I tried Wifix, not working. I flashed 4EXTRecovery and tried SmartFlash. I tried flash stock ICS ROM (about 400MB zip), still not working. Then i successful do S-OFF by Juopunut. I have HBOOT-1.27.1111, RADIO-11.25A-3504.13_M.
Please, can anyone help me? :crying:
Click to expand...
Click to collapse
have you tried to re flash the rom with FULL WIPE??

Fakhri 19 said:
have you tried to re flash the rom with FULL WIPE??
Click to expand...
Click to collapse
Yea, i did full wipe everytime. Btw, now it's hard bricket, because i wanted to do completly stock restore and i tried S-ON... Can't power on, LED isn't isn't lighting when charging, can't open bootloader

PitnerT said:
Yea, i did full wipe everytime. Btw, now it's hard bricket, because i wanted to do completly stock restore and i tried S-ON... Can't power on, LED isn't isn't lighting when charging, can't open bootloader
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1522351

rzr86 said:
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
Yea, it didn't work at Ubuntu 8 32bit, but while ago i tried Ubuntu 13 64bit and i have back original HBOOT, its S-ON and LOCKED!!!

PitnerT said:
Yea, it didn't work at Ubuntu 8 32bit, but while ago i tried Ubuntu 13 64bit and i have back original HBOOT, its S-ON and LOCKED!!!
Click to expand...
Click to collapse
i am just curious
what exactly did you do and bricked the device?

rzr86 said:
i am just curious
what exactly did you do and bricked the device?
Click to expand...
Click to collapse
i wrote "fastboot oem writesecureflag 3"
Okay, so i am S-ON, LOCKED bootloader, Security Warning in HBOOT. I have no recovery in this moment. I want flash ION CM11 ROM.
So, how? Do HTCdev or just S-OFF? I will flash 4EXT Recovery... I want working wifi and bluetooth. Thank you

PitnerT said:
i wrote "fastboot oem writesecureflag 3"
Okay, so i am S-ON, LOCKED bootloader, Security Warning in HBOOT. I have no recovery in this moment. I want flash ION CM11 ROM.
So, how? Do HTCdev or just S-OFF? I will flash 4EXT Recovery... I want working wifi and bluetooth. Thank you
Click to expand...
Click to collapse
just to know
you are using this command only after using a ruu.exe and make sure that you have the official hboot version
now just go for S-OFF

rzr86 said:
just to know
you are using this command only after using a ruu.exe and make sure that you have the official hboot version
now just go for S-OFF
Click to expand...
Click to collapse
Thanks, i will S-OFF. Must i unlock bootloader by HTCDev after S-OFF? Or just flash recovery, ROM, Kernel, Gapps?

Okay, I did HTCdev Unlock (it was only way to flash something), then flashed 4EXT, then did S-OFF and flashed 3.32 Stock ROM. Wifi and BT still not working Please, any ideas?

PitnerT said:
Okay, I did HTCdev Unlock (it was only way to flash something), then flashed 4EXT, then did S-OFF and flashed 3.32 Stock ROM. Wifi and BT still not working Please, any ideas?
Click to expand...
Click to collapse
wipe dalvik + cache from recovery
by the way it is not the only way to flash something after S-OFF
after S-OFF you could flash from bootloader 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
it gives also a patched hboot which is unlocked

rzr86 said:
wipe dalvik + cache from recovery
by the way it is not the only way to flash something after S-OFF
after S-OFF you could flash from bootloader 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
it gives also a patched hboot which is unlocked
Click to expand...
Click to collapse
I always wipe everything... It was only way, without unlocked bootloader i can't do S-OFF :laugh: Yeah, i tried flash 3.33 firmware, than 3.33 ROM, but "Installation aborted (status 1)"

PitnerT said:
I always wipe everything... It was only way, without unlocked bootloader i can't do S-OFF :laugh: Yeah, i tried flash 3.33 firmware, than 3.33 ROM, but "Installation aborted (status 1)"
Click to expand...
Click to collapse
Installation aborted (status 1) from the rom or from the firmware zip?
when you used the ruu.exe to return back to stock did you check the wifi and bluetooth then?
try again flashing the boot.img of the rom via fastboot command

rzr86 said:
Installation aborted (status 1) from the rom or from the firmware zip?
when you used the ruu.exe to return back to stock did you check the wifi and bluetooth then?
try again flashing the boot.img of the rom via fastboot command
Click to expand...
Click to collapse
I didn't use ruu.exe, i flashed 3.33 ROM.zip via 4EXT. So i try some RUU 3.33...

PitnerT said:
I didn't use ruu.exe, i flashed 3.33 ROM.zip via 4EXT. So i try some RUU 3.33...
Click to expand...
Click to collapse
now it makes sense
that's why you bricked your device before
never use the writesecureflag command before using any ruu.exe
you should know that
note: no need to return to S-ON
just keep the S-OFF status

rzr86 said:
now it makes sense
that's why you bricked your device before
never use the writesecureflag command before using any ruu.exe
you should know that
note: no need to return to S-ON
just keep the S-OFF status
Click to expand...
Click to collapse
this will be ok? Official RUU-Pyramid-ICS-hTC-Europe-3.33.401.5 RUU-Pyramid-ICS-hTC-Europe-3.33.401.6-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-266171-signed.exe
Anyway, thanks

PitnerT said:
this will be ok? Official RUU-Pyramid-ICS-hTC-Europe-3.33.401.5 RUU-Pyramid-ICS-hTC-Europe-3.33.401.6-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-266171-signed.exe
Anyway, thanks
Click to expand...
Click to collapse
it is fine

rzr86 said:
it is fine
Click to expand...
Click to collapse
Okay, RUU said Error 113

PitnerT said:
Okay, RUU said Error 113
Click to expand...
Click to collapse
Fastboot getvar all
Hide imei and sn.

nlooooo said:
Fastboot getvar all
Hide imei and sn.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1111
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: xxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: T-MOB004
(bootloader) battery-status: good
(bootloader) battery-voltage: 4019mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.488s

Related

[Q] Sensation XE Bootloop

Hi,
I'm having a bootloop on my sensation xe. I never used a custom rom or anything, and last week i got the following error while updating an app:
"Couldn’t install on USB storage or SD card" I rebooted my phone, and then i got stuck in a bootloop (booting till the htc logo, then rebooting).
I tried to flash a stock RUU from fastboot following this guide http://forum.xda-developers.com/showthread.php?t=1672425 . The command line showed no errors while flashing, but this didn't help.
Also flashing 4ext and cwm recoveries didn't work, the commandline showed no errors, but on the screen of my phone the little progress bar on the upper right side never got filled, and the recovery just goes straight to the htc logo, and then rebooting again..
Version:
Relocked
Pyramid pvt ship s-on rl
hboot-1.29.0000
eMMc-boot
cid: HTC__E11
mid: PG5813001
Is there anything else i can try, or should i send it out to be repaired?
Thanks in advance!
First_FLT said:
Hi,
I'm having a bootloop on my sensation xe. I never used a custom rom or anything, and last week i got the following error while updating an app:
"Couldn’t install on USB storage or SD card" I rebooted my phone, and then i got stuck in a bootloop (booting till the htc logo, then rebooting).
I tried to flash a stock RUU from fastboot following this guide http://forum.xda-developers.com/showthread.php?t=1672425 . The command line showed no errors while flashing, but this didn't help.
Also flashing 4ext and cwm recoveries didn't work, the commandline showed no errors, but on the screen of my phone the little progress bar on the upper right side never got filled, and the recovery just goes straight to the htc logo, and then rebooting again..
Version:
Relocked
Pyramid pvt ship s-on rl
hboot-1.29.0000
eMMc-boot
cid: HTC__E11
mid: PG5813001
Is there anything else i can try, or should i send it out to be repaired?
Thanks in advance!
Click to expand...
Click to collapse
unlock again your bootloader with the unlock token.bin code
then see this thread to install roms with S-ON
http://forum.xda-developers.com/showthread.php?t=1631861
rzr86 said:
unlock again your bootloader with the unlock token.bin code
then see this thread to install roms with S-ON
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
Thanks for your reply.
But like I said, flashing 4EXT recovery is not working. It seems to flash ok (no errors), but when i try to access the recovery it just skips to the boot loop again.
First_FLT said:
Thanks for your reply.
But like I said, flashing 4EXT recovery is not working. It seems to flash ok (no errors), but when i try to access the recovery it just skips to the boot loop again.
Click to expand...
Click to collapse
did you try to install the recovery with unlocked bootloader?
because with relocked it won't work
edit:try to install 4ext using step 2 from the guide i linked to you if you haven't done it already
rzr86 said:
unlock again your bootloader with the unlock token.bin code
then see this thread to install roms with S-ON
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
rzr86 said:
did you try to install the recovery with unlocked bootloader?
because with relocked it won't work
edit:try to install 4ext using step 2 from the guide i linked to you if you haven't done it already
Click to expand...
Click to collapse
Yes, i tried with unlocked bootloader and just like that step from the guide. After that i tried to flash again a stock ruu so that's why the bootloader was relocked again.
what firmware do you have?
which ruu did you use?
rzr86 said:
what firmware do you have?
which ruu did you use?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.153
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813001
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 3778mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I tried :
rmk-pyramid-stock_ics_3.32.401.3-v1
OTA_PYRAMID_LE_ICS_35_S_HTC_Europe_3.32.401.105-1.73.401.4
RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.33.401.153_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_281004_signed
the last one it was suppose to work
that is what you need.nevermind
re-run ruu again and see this time if it will work
also did you do a factory reset?
rzr86 said:
the last one it was suppose to work
that is what you need.nevermind
re-run ruu again and see this time if it will work
also did you do a factory reset?
Click to expand...
Click to collapse
Running the ruu again now. I did try a factory reset, but again it jumps straight to the htc logo and then loops again
Edit: Same thing, rom update successfull, but keeps boot looping.. I did notice that the update seem to jump from 65% to 100% very fast, could that mean something?
You have latest hboot (1.29), AFAIK it cannot be completely unlocked.
Also, it is 'Relocked' ? Use htc dev token to unlock it again, than flash 4ext, and use it with 'smartflash' turned on.
Sent from my HTC Sensation Z710e using xda premium
Like i said, i cant seem to flash 4 ext. It gives no errors on flashing, but i cant enter the recovery
First_FLT said:
Like i said, i cant seem to flash 4 ext. It gives no errors on flashing, but i cant enter the recovery
Click to expand...
Click to collapse
give a try with another recovery like cwm
i am out of ideas...
rzr86 said:
give a try with another recovery like cwm
i am out of ideas...
Click to expand...
Click to collapse
I tried cwm allready, same as 4ext. I guess this means off to the repair guy :crying:
see if you can boot to recovery
fastboot boot recovery.img
if booted to recovery ..try to flash a custom rom and see
ganeshp said:
see if you can boot to recovery
fastboot boot recovery.img
if booted to recovery ..try to flash a custom rom and see
Click to expand...
Click to collapse
Same thing:
downloading 'boot.img'...
OKAY [ 1.498s]
booting...
OKAY [ 0.000s]
finished. total time: 1.498s
But phone jumps to htc logo and then keeps looping
First_FLT said:
Same thing:
downloading 'boot.img'...
OKAY [ 1.498s]
booting...
OKAY [ 0.000s]
finished. total time: 1.498s
But phone jumps to htc logo and then keeps looping
Click to expand...
Click to collapse
Ruu also didn't worked right? Then mostly a hardware issue.. If you are soff you could try gingerbread rom.. But that's not the case
Sent from my HTC Sensation using xda premium

[Q] Looking for Ruu for H3G__001

Hi all, I've been searching for hours with no success, But was wondering does anyone have a Nandroid backup of a H3G__001 rom or a link to an official Ruu? I just can't seem to find one anywhere. Hope someone can help. Thanks.
Look on androidfiles.org/ruu
Sent from my HTC One S using Tapatalk 2
usaff22 said:
Look on androidfiles.org/ruu
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
i download 2 different ruu h3g and always i have error 155 when i try flash the phone.
My phone is vrick only bootloader turn on
thats happend after i try flash viper rom for htc one s s4
i try put stock boot and recovery lock bootloader and nothing always i have error 155 witht this 2 ruu
RUU which i try
RUU_Ville_U_H3G_UK_1.78.771.5_Radio_0.16.31501S.19_2_10.23.31501S.10L_release_258982_signed
RUU_Ville_U_H3G_UK_1.53.771.4_Radio_0.15.31501S.19_2_10.13.31501S.06L_release_251870_signed
bootloader) version: 0.5
bootloader) version-bootloader: 2.13.0000
bootloader) version-baseband: 1.11.50.05.28
bootloader) version-cpld: None
bootloader) version-microp: None
bootloader) version-main:
bootloader) version-misc: PVT SHIP S-ON
bootloader) serialno: SH**********
bootloader) imei: 3**************
bootloader) product: vle
bootloader) platform: HBOOT-8960
bootloader) modelid: PJ4010000
bootloader) cidnum: H3G__001
bootloader) battery-status: good
bootloader) battery-voltage: 4128mV
bootloader) partition-layout: Generic
bootloader) security: on
bootloader) build-mode: SHIP
bootloader) boot-mode: RUU
bootloader) commitno-bootloader: dirty-26dff973
bootloader) hbootpreupdate: 11
bootloader) gencheckpt: 0
ll: Done!
Click to expand...
Click to collapse
Regards
blackangel82 said:
i download 2 different ruu h3g and always i have error 155 when i try flash the phone.
My phone is vrick only bootloader turn on
thats happend after i try flash viper rom for htc one s s4
i try put stock boot and recovery lock bootloader and nothing always i have error 155 witht this 2 ruu
RUU which i try
RUU_Ville_U_H3G_UK_1.78.771.5_Radio_0.16.31501S.19_2_10.23.31501S.10L_release_258982_signed
RUU_Ville_U_H3G_UK_1.53.771.4_Radio_0.15.31501S.19_2_10.13.31501S.06L_release_251870_signed
Regards
Click to expand...
Click to collapse
Redownload the RUU, could be corrupt. Relock bootloader. Run as administrator.
Try those steps.
usaff22 said:
Redownload the RUU, could be corrupt. Relock bootloader. Run as administrator.
Try those steps.
Click to expand...
Click to collapse
both ruu can corupt ? anyway i try this steps
and i have win7 this something change ?
EDIT1
i try this steps with new ruu and this same error 155 after checking signatures
Regards
Lucas
blackangel82 said:
both ruu can corupt ? anyway i try this steps
and i have win7 this something change ?
EDIT1
i try this steps with new ruu and this same error 155 after checking signatures
Regards
Lucas
Click to expand...
Click to collapse
Did you relock bl?
usaff22 said:
Did you relock bl?
Click to expand...
Click to collapse
yes i did
when ruu show error 155 and i unplug the cabel from phone on display show RUU update failed and after this when i reboot phone going to bootloader without htc logo
screen from bootloader after ruu error:
[img=http://s14.postimg.org/acb3f3dvx/IMAG0294.jpg]
blackangel82 said:
yes i did
when ruu show error 155 and i unplug the cabel from phone on display show RUU update failed and after this when i reboot phone going to bootloader without htc logo
screen from bootloader after ruu error:
[img=http://s14.postimg.org/acb3f3dvx/IMAG0294.jpg]
Click to expand...
Click to collapse
In that case I would unlock bl again, flash a rom, s-off and change cid to HTC__001. Then run an unbranded WWE RUU.
usaff22 said:
In that case I would unlock bl again, flash a rom, s-off and change cid to HTC__001. Then run an unbranded WWE RUU.
Click to expand...
Click to collapse
which rom ?? i try again viper 2.0.1 and is only erase and after this finish in aroma installer
blackangel82 said:
which rom ?? i try again viper 2.0.1 and is only erase and after this finish in aroma installer
Click to expand...
Click to collapse
Use another ROM like CM10, doesn't have to be ViperOneS
usaff22 said:
Use another ROM like CM10, doesn't have to be ViperOneS
Click to expand...
Click to collapse
maybe you know my phone is S3 or S4 ?
When i try flash rom via twrp all time show me errors unable to mount cache unable to mount etc
Regards
blackangel82 said:
maybe you know my phone is S3 or S4 ?
When i try flash rom via twrp all time show me errors unable to mount cache unable to mount etc
Regards
Click to expand...
Click to collapse
I don't know, check yourself in the bootloader, VILLEC2 is S3
Try reflashing twrp
Current hboot is to high for those ruu, cant downgrade without s-off
Verstuurd van mijn HTC One S met Tapatalk

[Q] Stuck at HTC logo after failed stock update

Heyy, so i was wondering if yous could help me. I have a stock HTC Sensation EU, t-mobile version, which I had updated to the latest version (4.0.3 I think). During the upgrade-process something went wrong and now it doesn't go past the HTC logo. S-ON. When in Hboot it shows no found something.img. What is the way to fix this?
If possible I'd like to root it as well and use the Cyanogenmod.
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
blogodoblogodo said:
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
Click to expand...
Click to collapse
Seems good, i´ll try it out
blogodoblogodo said:
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
Click to expand...
Click to collapse
So it worked, but it didn't. I managed to install a custom rom, but after 10 seconds (if it even was that much), the system crashes and reboots, only to do the same thing again.
I used a RUU as well but I got a signing error (132) when using the RUU. I then tried installing the RUU through fastboot and I got further. I did however got the error saying the CID wasn't matching. In the .txt file from the zip I had added my CID, So I thought it had to work.
There is no official rom for my cid (T-MOB003) unfortunately.
This is starting to give me a headache
Search for this HERE
blogodoblogodo said:
Search for this HERE
Click to expand...
Click to collapse
Well DEFINITELY not there.
Those are Sensation XL.
Here's for our Sensation http://forum.xda-developers.com/showthread.php?t=1672425
Hoooooooo, Nooo,
Sorry ,really sorry
I googled "T-MOB003 for SENSATION"
Sorry DrNickjen
Thank You Nicx59
Nicx59 said:
Well DEFINITELY not there.
Those are Sensation XL.
Here's for our Sensation http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
I have read that once, but I'll do it again; this time more thorougly.
The RUU I'm trying to install is RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_Radio_11.69.3504.00U_11.22.3504.07_M_release_246089_signed
fastboot getvar all returns
Code:
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.114.2
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: T-MOB003
(bootloader) battery-status: good
(bootloader) battery-voltage: 4104mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9d24123f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Since my cidnum is not in the RUU, (and there isn't a RUU for my cid) I'll have to add it according to the guide. I'll get to that later. hboot version to install and version-main are both higher than currently installed, so that shouldn't be an issue.
My phone is S-ON, but unlocked so I'll have to relock it again. Followed instructions and device is *** RELOCKED ***. Displays, however, a security warning. I'll now proceed with the installation by executing the exe. If I'm right I should see an error.
Error: Customer ID incorrect, as expected. I'll now try to install manually.
Since my CID is different I'll change it in the .zip. 7z didn't allow me to change it in the archive itself so I've extracted the archive, changed android-info.txt to:
Code:
modelid: PG5813000
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__N34
cidnum: HTC__203
cidnum: HTC__102
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__A07
cidnum: HTC__304
cidnum: HTC__032
cidnum: HTC__016
cidnum: T-MOB003
mainver: 3.32.401.5
hbootpreupdate:12
DelCache:1
Note: When pasting this my CID was placed on the same line as mainver. Inserted an enter and repasted in android-info.txt.
What I did as well was unlock the bootloader again, changed recovery to the file inside the rom.zip, and relocked the bootloader. I read this was a fix for the problem.
THIS POST IS IN PROGRESS
HI its not necessary to show ure imei, plz, edit your post and Erase it.
blogodoblogodo said:
HI its not necessary to show ure imei, plz, edit your post and Erase it.
Click to expand...
Click to collapse
Thanks.
Just Hit ThAnks Button
So For you, is it good???
blogodoblogodo said:
Just Hit ThAnks Button
So For you, is it good???
Click to expand...
Click to collapse
Nope. I gave up fot the day because I couldn't het the PG58IMG flashed. It didn't have an effect in hboot so I tried using fastboot but i got an unknown error. The tries installing ViperS 2.0, which succeeded. On boot, however, the system crashed and rebooted automatically, just like the other rom's i've tried.
If only I could get a rom working...
DrNickjen said:
Nope. I gave up fot the day because I couldn't het the PG58IMG flashed. It didn't have an effect in hboot so I tried using fastboot but i got an unknown error. The tries installing ViperS 2.0, which succeeded. On boot, however, the system crashed and rebooted automatically, just like the other rom's i've tried.
If only I could get a rom working...
Click to expand...
Click to collapse
actually if you are still on gingerbread firmware you can't boot any ics or jb rom
flash this rom from recovery
http://d-h.st/bqL
if you still want to upgrade to ics then S-OFF the device from here
http://revolutionary.io/
after that flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
then flash any ics or jb rom from recovery
rzr86 said:
actually if you are still on gingerbread firmware you can't boot any ics or jb rom
flash this rom from recovery
http://d-h.st/bqL
if you still want to upgrade to ics then S-OFF the device from here
http://revolutionary.io/
after that flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
then flash any ics or jb rom from recovery
Click to expand...
Click to collapse
Flashed it using Cwm, first did a full wipe and it installed fine. It then booted en got to a black screen and rebooted. Wiping Dalvik cache + /cache didn't work as a solution.
Same thing as any other .zip I've installed through recovery.
DrNickjen said:
Flashed it using Cwm, first did a full wipe and it installed fine. It then booted en got to a black screen and rebooted. Wiping Dalvik cache + /cache didn't work as a solution.
Same thing as any other .zip I've installed through recovery.
Click to expand...
Click to collapse
can you post your bootloader details again and what rom did you try to flash now?
also did you try to follow the steps i gave you?
rzr86 said:
can you post your bootloader details again and what rom did you try to flash now?
also did you try to follow the steps i gave you?
Click to expand...
Click to collapse
UNLOCKED
Pyramid PVT SHIP S-ON RL
HBOOT-1.18.000
eMMC-boot
August 2nd 2011
Tried to flash the rom you linked to and yes I have.
DrNickjen said:
UNLOCKED
Pyramid PVT SHIP S-ON RL
HBOOT-1.18.000
eMMC-boot
August 2nd 2011
Tried to flash the rom you linked to and yes I have.
Click to expand...
Click to collapse
change the recovery to 4ext
before flash the rom enable smartflash from 4ext
rzr86 said:
change the recovery to 4ext
before flash the rom enable smartflash from 4ext
Click to expand...
Click to collapse
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
DrNickjen said:
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
Click to expand...
Click to collapse
First make a full backup of your device through 4ext.
Then just flash the zips from one of the following releases:
android1234567's release (here you have to flash rom and kernel seperately)
albinoman887's releease
And last flash gapps from here
DrNickjen said:
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
Click to expand...
Click to collapse
see my previous post of what to do now
S-OFF
flash 3.33 universal(check md5 sums before flashing)
flash cyanogenmod rom
done
note:when you achieve S-OFF you won't need anymore the smartflash feature

Help i killed my Phone:D

I was on Maximus HD 10.0
Then i tried another rom. but i don't like, so i downloaded 10.2 latest nightly but it on my internal storage-->full wipe-->and then i can't install cm10.2 then i want to but another rom on my internal storage but i can't put anything on the phone without an running rom...
then i changed my recovery to CWM 6. cause i knower there was an option to mount usb storage, but it don't work nothings happened when i click on it. Pleas help me i can do nothing
Some more Infos:C:\test>fastboot getvar all
version: 0.5
version-bootloader: 2.16.0000
version-baseband: 1.20.50.05.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: *************
imei: **************
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: 11111111
battery-status: good
battery-voltage: 4128mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4958290506
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.078s
Jojo1992 said:
I was on Maximus HD 10.0
Then i tried another rom. but i don't like, so i downloaded 10.2 latest nightly but it on my internal storage-->full wipe-->and then i can't install cm10.2 then i want to but another rom on my internal storage but i can't put anything on the phone without an running rom...
then i changed my recovery to CWM 6. cause i knower there was an option to mount usb storage, but it don't work nothings happened when i click on it. Pleas help me i can do nothing
Some more Infos:C:\test>fastboot getvar all
version: 0.5
version-bootloader: 2.16.0000
version-baseband: 1.20.50.05.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: SH26RW404047
imei: 359901049107937
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: 11111111
battery-status: good
battery-voltage: 4128mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4958290506
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.078s
Click to expand...
Click to collapse
I hope this Infos can help to solve my Problem, i have access via Fastboot!
The best would be if i can go back to stock.
Jojo1992 said:
I hope this Infos can help to solve my Problem, i have access via Fastboot!
The best would be if i can go back to stock.
Click to expand...
Click to collapse
You need the old firmware like you had before you updated to Maximus.
Run a RUU.exe and clear storage/factory reset in bootloader when you have the stock recovery back on.
From your other thread I posted more details
http://forum.xda-developers.com/showpost.php?p=47586067&postcount=7
tivofool said:
You need the old firmware like you had before you updated to Maximus.
Run a RUU.exe and clear storage/factory reset in bootloader when you have the stock recovery back on.
From your other thread I posted more details
http://forum.xda-developers.com/showpost.php?p=47586067&postcount=7
Click to expand...
Click to collapse
i downloaded an RUU:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
then i make this:
fastboot devices
fastboot oem lock
then start RUU, but error no connection to device but in cmd i get a connection
I have a CID 111111 is that the Problem?
Jojo1992 said:
I have a CID 111111 is that the Problem?
Click to expand...
Click to collapse
I've never changed my CID, no need to. So I'm not an expert.
But from what I have read here:
"You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid. "
So, not a problem, unless you install a OTA (over the air) update while SuperCid.
Here's a good guide from another forum
http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html
Glancing at that, I noticed it recommends running the RUU on the PC as administrator, maybe it's something simple like that.
tivofool said:
I've never changed my CID, no need to. So I'm not an expert.
But from what I have read here:
"You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid. "
So, not a problem, unless you install a OTA (over the air) update while SuperCid.
Here's a good guide from another forum
http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html
Glancing at that, I noticed it recommends running the RUU on the PC as administrator, maybe it's something simple like that.
Click to expand...
Click to collapse
I changed my CID back to HTC__102
and tried zwo different RUU.exe one ICS on JB but both have an error...
i relocked my boot loader how can i unlock again?
Jojo1992 said:
I changed my CID back to HTC__102
and tried zwo different RUU.exe one ICS on JB but both have an error...
i relocked my boot loader how can i unlock again?
Click to expand...
Click to collapse
When trying the RUU did you go to bootloader (fastboot USB)?
To Unlock
Locate your Unlock_code.bin on your pc, probably saved it somewhere or it is still in your fastboot folder.
Type this into your command prompt window fastboot flash unlocktoken Unlock_code.bin
or go through the process of getting a new one http://forum.xda-developers.com/showthread.php?t=1583427
Nice tool (Windroid)
http://forum.xda-developers.com/showthread.php?t=2471151
tivofool said:
When trying the RUU did you go to bootloader (fastboot USB)?
To Unlock
Locate your Unlock_code.bin on your pc, probably saved it somewhere or it is still in your fastboot folder.
Type this into your command prompt window fastboot flash unlocktoken Unlock_code.bin
or go through the process of getting a new one http://forum.xda-developers.com/showthread.php?t=1583427
Nice tool (Windroid)
http://forum.xda-developers.com/showthread.php?t=2471151
Click to expand...
Click to collapse
Yes I was in fast boot USB
I will try it one time again and when it don't work then unlock again
Jojo1992 said:
Yes I was in fast boot USB
I will try it one time again and when it don't work then unlock again
Click to expand...
Click to collapse
Oh yeah, I've also read from someone that they got error 155 then they flashed stock recovery and relocked bootloader and then RUU proceeded to work.
tivofool said:
Oh yeah, I've also read from someone that they got error 155 then they flashed stock recovery and relocked bootloader and then RUU proceeded to work.
Click to expand...
Click to collapse
I unlocked and now i could flash:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
that worked for me.
So which is the latest CM what i could install now?
Hboot: 1.14.0002
UNLOCKED
S-OFF
Running:
Android 4.0.4 HTC Sense4.1 Softwarenumber:2.31.401.5
Jojo1992 said:
I unlocked and now i could flash:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
that worked for me.
So which is the latest CM what i could install now?
Hboot: 1.14.0002
UNLOCKED
S-OFF
Running:
Android 4.0.4 HTC Sense4.1 Softwarenumber:2.31.401.5
Click to expand...
Click to collapse
Glad you were able to get the RUU working. But right now you won't be able to flash many ROMs with that low of a Hboot. You will need to update the firmware.
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
Or...this firmware update thread
http://forum.xda-developers.com/showthread.php?t=2322755
tivofool said:
Glad you were able to get the RUU working. But right now you won't be able to flash many ROMs with that low of a Hboot. You will need to update the firmware.
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
Or...this firmware update thread
http://forum.xda-developers.com/showthread.php?t=2322755
Click to expand...
Click to collapse
where can i find stock recovery?
flash it like this or?: fastboot flash recovery recover.img
and relock bootloader with: fastboot oem lock ???
Jojo1992 said:
where can i find stock recovery?
flash it like this or?: fastboot flash recovery recover.img
and relock bootloader with: fastboot oem lock ???
Click to expand...
Click to collapse
There is a stock recovery here
http://www.modaco.com/topic/353006-...ch-recovery-for-the-htc-one-s-stock-download/
The SECOND download is the stock one
Unless you change the name of the recovery the command will probably look more like this:
fastboot flash recovery ville_recovery_signed.img
And yes
fastboot oem lock
after you have flashed the stock recovery of course
tivofool said:
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
[/url]
Click to expand...
Click to collapse
Or he could just change cid to HTC__001 and flash jb ruu. (The European version)
Sent from HTC One S using android 4.2.2 sense 5
tominozh said:
Or he could just change cid to HTC__001 and flash jb ruu. (The European version)
Sent from HTC One S using android 4.2.2 sense 5
Click to expand...
Click to collapse
That don't work
I tried:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
I will try it over ota now --> my Handy ist loading the update 4.1.1 i will report as soon as it is ready
Ok edit:
Hboot 2.15.0000
Unlocked
can i now flash CM10.2?
O.T.: Is CM10.2 running stable?
Jojo1992 said:
That don't work
I tried:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
I will try it over ota now --> my Handy ist loading the update 4.1.1 i will report as soon as it is ready
Ok edit:
Hboot 2.15.0000
Unlocked
can i now flash CM10.2?
O.T.: Is CM10.2 running stable?
Click to expand...
Click to collapse
Eh.. It is stable besides for some bootlooping. Like you start it up and it bootloops a few times before finally loading. I like the Avatar Rom which is CM 10.2 based, and noticed a little bootlooping. But it wasn't terrible, just something that happened a few times.
So if that doesn't bother you, go for it. Other than that you would need to stick with sense based roms for stability.
Gosh, so many to choose from you will have to try some out.
http://forum.xda-developers.com/showthread.php?t=2243895
tivofool said:
Eh.. It is stable besides for some bootlooping. Like you start it up and it bootloops a few times before finally loading. I like the Avatar Rom which is CM 10.2 based, and noticed a little bootlooping. But it wasn't terrible, just something that happened a few times.
So if that doesn't bother you, go for it. Other than that you would need to stick with sense based roms for stability.
Gosh, so many to choose from you will have to try some out.
http://forum.xda-developers.com/showthread.php?t=2243895
Click to expand...
Click to collapse
Is the Avatar Rom really 10.2 based? cause on their page they tell 10.1 based or?
but i can install now any rom or?
with the flashed rue which i have actually i don't get mobile internet working. just wlan
Jojo1992 said:
Is the Avatar Rom really 10.2 based? cause on their page they tell 10.1 based or?
but i can install now any rom or?
with the flashed rue which i have actually i don't get mobile internet working. just wlan
Click to expand...
Click to collapse
Ya, guess you are right, 10.1
You can flash any as long as they don't require hboot 2.16 (which they state in the first page OP)
tivofool said:
Ya, guess you are right, 10.1
You can flash any as long as they don't require hboot 2.16 (which they state in the first page OP)
Click to expand...
Click to collapse
ok thank you very much for the help!

Problem with Custom Roms

Hi there i tested these ROMS on mine HTC One S Ville S4 (International).
Here the Results:
Maximus 10.0.0 - http://forum.xda-developers.com/showthread.php?t=2445392
I´ve followed all steps but no luck, the phone reach splash screen and all i get is all 3 lights on the bottom and a green on the top illuminated.
LIBERTY ROM - The Sixth Element 4.4.2/4.4.3
Almost the same situation with Maximus Rom but with Black splash screen this time on the 2 versions of this Rom
At the moment i have the ViperOneS 3.2.0 but i would like test other Roms.
Here my specs:
----> Start <----
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.13.0000
(bootloader) version-baseband: 0.16.31501S.17_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: SH24PW******
(bootloader) imei: ***************
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__304
(bootloader) battery-status: good
(bootloader) battery-voltage: 3873mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d92cc658
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.071s
----> End <----
you need a specific hboot to try the rom. i think is 2.15 and you have 1.13.. so..... i think that is the problem.
first of all you'd update all that is possible to lates ver. (hboot, recovery), may be you should try hboot 2.16 and roms for it...
grorg said:
first of all you'd update all that is possible to lates ver. (hboot, recovery), may be you should try hboot 2.16 and roms for it...
Click to expand...
Click to collapse
No luck with RUUs
vic_111 said:
No luck with RUUs
Click to expand...
Click to collapse
You will need to update HBOOT to version 2.15 or 2.16 depending on which rom you want to install. HTC__304 is Europe/Spain so the Europe RUU should be fine for you. Its pretty easy:
Download FIRMWARE HBOOT 2.15
Extract the included recovery and flash it using fastboot:
fastboot flash recovery recovery.img
Relock your bootloader (in case it's actually locked)
fastboot oem lock
Then flash the firmware215.zip:
fastboot oem rebootRUU
fastboot flash zip firmware215.zip
fastboot flash zip firmware215.zip (First time you probably get an error, so just retype the command!!!)
fastboot reboot-bootloader (to get back into bootloader mode)
LS.xD said:
You will need to update HBOOT to version 2.15 or 2.16 depending on which rom you want to install. HTC__304 is Europe/Spain so the Europe RUU should be fine for you. Its pretty easy:
Download FIRMWARE HBOOT 2.15
Extract the included recovery and flash it using fastboot:
fastboot flash recovery recovery.img
Relock your bootloader (in case it's actually locked)
fastboot oem lock
Then flash the firmware215.zip:
fastboot oem rebootRUU
fastboot flash zip firmware215.zip
fastboot flash zip firmware215.zip (First time you probably get an error, so just retype the command!!!)
fastboot reboot-bootloader (to get back into bootloader mode)
Click to expand...
Click to collapse
He's S-On, are you sure it'll work like this? Flashing firmware is not possible unless you're S-Off. He should first try to achieve S-Off via rumrunner or other method (since he's already using Viper or a close-to-stock ROM). Then he might try flashing 2.15/2.16 firmware
Rapier said:
He's S-On, are you sure it'll work like this? Flashing firmware is not possible unless you're S-Off. He should first try to achieve S-Off via rumrunner or other method (since he's already using Viper or a close-to-stock ROM). Then he might try flashing 2.15/2.16 firmware
Click to expand...
Click to collapse
I'm sure. Flashing "SIGNED" zips will totally work with S-ON.
LS.xD said:
I'm sure. Flashing "SIGNED" zips will totally work with S-ON.
Click to expand...
Click to collapse
I will give it a try , hope I don't get a brick
But I have two questions:
1What you mean "locked" I have my boot loader unlocked!
When I finish the flash process I can unlock again?
Sent from my HTC One S
vic_111 said:
I will give it a try , hope I don't get a brick
But I have two questions:
1What you mean "locked" I have my boot loader unlocked!
When I finish the flash process I can unlock again?
Sent from my HTC One S
Click to expand...
Click to collapse
You can unlock it at any time, but you will have to lock it before upgrade the firmware.
LS.xD said:
You can unlock it at any time, but you will have to lock it before upgrade the firmware.
Click to expand...
Click to collapse
No luck, upgraded sucessfully but now i have a blank screen blinking
Update: Should i update to 2.16? If yes where i can get it?
Update URGENT: I cant install any rom now help please
Update 2: I tried install 2.16 but unsucessfull
Update 3:Anyone can find a RUU for me , because i cant :crying:
Update 4: Well i am on ViperOneS again , somehow (flashed boot.img before aroma-installer),but i would like test Liberty one you think you can send me hboot 2.16 signed , i tried find but only for s-off
Update 5 [LAST ONE]: Finally i get it Liberty Rom works 100% thanks for all the help guys , REALLY!!!
vic_111 said:
No luck, upgraded sucessfully but now i have a blank screen blinking
Update: Should i update to 2.16? If yes where i can get it?
Update URGENT: I cant install any rom now help please
Update 2: I tried install 2.16 but unsucessfull
Update 3:Anyone can find a RUU for me , because i cant :crying:
Update 4: Well i am on ViperOneS again , somehow (flashed boot.img before aroma-installer),but i would like test Liberty one you think you can send me hboot 2.16 signed , i tried find but only for s-off
Click to expand...
Click to collapse
Update 5 [LAST ONE]: Finally i get it Liberty Rom works 100% thanks for all the help guys , REALLY!!!
vic_111 said:
No luck, upgraded sucessfully but now i have a blank screen blinking
Update: Should i update to 2.16? If yes where i can get it?
Update URGENT: I cant install any rom now help please
Update 2: I tried install 2.16 but unsucessfull
Update 3:Anyone can find a RUU for me , because i cant :crying:
Update 4: Well i am on ViperOneS again , somehow (flashed boot.img before aroma-installer),but i would like test Liberty one you think you can send me hboot 2.16 signed , i tried find but only for s-off
Update 5 [LAST ONE]: Finally i get it Liberty Rom works 100% thanks for all the help guys , REALLY!!!
Click to expand...
Click to collapse
I'm glad you finally made it. HBOOT 2.16 works with S-OFF only, thats why I uploaded 2.15. As @Rapier mentioned earlier, you can use rumrunner.us for easily getting S-OFF
Mind you that hboot 2.16 gives you shared internal storage. E.g. all free space is available to all partitions. This may come tot be necessary for you if flashing lollipop roms since the "foot print" of installed aps on lollipop becomes much larger. This has to do with runtime environment... Kitkat runs with Dalvik Cache whereas Lollipop runs with the Android Runtime aka ART.
So, staying on hboot 2.15 give you the old partition layout with approx. 1 GByte(??) free for apps and 7 as internal SD.
While hboot 2.16 serves all your free internal storage to all partitions. This saves you headache of internal space for apps running out.
(Someone may deel to fill in the technical gaps i left in)
Cheers , happy hboot 2.16 user.
Verstuurd vanaf mijn One S met Tapatalk

Categories

Resources