Folks,
I just fired up my old samsung galaxy tablet 7. The first samsung galaxy tablet. Attempting to connect to my home wifi after bypassing the activation screen. It just says obtaining address, but never fully connects and there is no internet connection at all on the browser.
- It used to have a verizon data connection but then I deactivated it from my verizon plan
- I factory reset it twice already and the same thing.
- I simply want to use it on wifi.
- I tried other multiple wifi signals with the same result ( wifi signals with NO passwords also )
- Also the super user app is on there from when I tried to erase it. Maybe I messed up the bootload or..the load/OS, I can't remember how to flash the stock one...
I'm pretty technically advanced but this is bothering me a lot.
You might want to make sure you're in the right forum to get help. This is the tab 7.7 forum.
Also before you go posting there you'll need to look up what ROM you're using and find out which model tablet you've got so you post in the right place. People can't help you with the information you've provided so far.
Related
Edit: This is the Galaxy Tab 7 Plus 4G w/ TMobile...
So far I am loving it. I have had a plethora of Android tablets, including the Galaxy Tab 10.1 (until yesterday), and the original 7" Tab. Here is an issue I have not run into thus far...
Issue 1: I like my brightness settings to be %100 all the time. I always (almost) have a power cable with me, so I'm not worried about the drain. I have the auto setting turned off as to keep it from adjusting on it's own. However, everytime I open the status menu with the brightness slider, it is down to about %90-%95. I can't get it to stay on full. Also, and even more annoying, every time I open the browser, the brightness drops to like %30'ish and I have to open the status menu and slide it back up. The browser is where I REALLY need the full brightness the most, and it's the biggest issue.
I noticed this out of the box, adjusted settings, nogo, so I factory reset, and same issue. This is leading me to believe this is just a setting or something I am missing. Any ideas?
Issue 2 (THE BIG ONE): This Tab 7+ can't see my work wifi. It connects to my wifi at home just fine (did last night at least), which is also WPA, but it doesn't even see the one at work. It acts like it isn't there. In fact, and this is probably important, it is not seeing any networks up here, and there are at least 10-15 that should be visible from my location in the building (all but a couple from other companies). My G2x (Android 2.3) is connected to my work wifi just fine, and it sees all the others around us, the the Tab 7+ right next to it sees none. I also turned on the wifi router on my phone, it will not see that one either. I've verified the wireless is enabled, as well as turning it off and on multiple times and many reboots, nogo... I need it to hit the wifi at work and home so it isn't sucking my 4G data, so this is a big issue for me.Any ideas? I'm at a loss...
Also, to answer before it's asked: Nope, it's not rooted. I may do this at some point (as I do most of my devices), but for the moment I want to leave it stock and not mess with it. These issues seem like they should be resolved/nonexistant in the stock ROM, so I shouldn't have to root to fix them. Please tell me if this is incorrect...
Thanks for any help, sorry for the long post...
(pardon typos, I'm at work and multitasking, no time to proofread)
on the brightness broweer tip. use a different browser. its a known issue that the stock browser automaticaly dims the screen.
otamctech said:
on the brightness broweer tip. use a different browser. its a known issue that the stock browser automaticaly dims the screen.
Click to expand...
Click to collapse
Thank you... You're right, it doesn't happen in Dolphin, however I am one of those weird people the really prefers the stock browser...
The biggest issue is the wifi not showing up. I am updating that issue with more info now...
what channel is the wireless network on? i had a similar problem on my windows laptop, it cannot see the wifi.. turned out that my wireless card(the driver actually) cannot see any wireless network beyond channel 12.. who knows you're having the same problem, might worth checking.
gingerboy92 said:
what channel is the wireless network on? i had a similar problem on my windows laptop, it cannot see the wifi.. turned out that my wireless card(the driver actually) cannot see any wireless network beyond channel 12.. who knows you're having the same problem, might worth checking.
Click to expand...
Click to collapse
Ours is on 6... Thanks though
for me it was the opposite, it could see my home wifi, but not my work.
only was to solve it was to setup a static ip at work for the GT7...
I called samsung, they said its a problem with some routers. No eta on fix other than static IP.
Shftup said:
for me it was the opposite, it could see my home wifi, but not my work.
only was to solve it was to setup a static ip at work for the GT7...
I called samsung, they said its a problem with some routers. No eta on fix other than static IP.
Click to expand...
Click to collapse
........
Just to chime in - I also have the same problem connecting to my work wireless network but I think because it uses a SEPARATE authentication scheme.
The way my office WLAN work is like this:
1). Connect to the WLAN with SSID "Office", no encryption password required
2). Once the Tab is connected, it WILL receive an IP address
3). Open up a browser (Dolphin, etc.) and try to go to any website (Google, etc.)
4). Instead of going to the website I typed in in no. 3, an authentication page will show up
5). I need to enter my Windows AD account and password
6). If its successful, then I can start browsing the Internet (but not going to the Internal network, that requires VPN access).
Step 3 is where the Tab FAILED to do so. It just doesn't want to get redirected to the authentication page.
lanwarrior said:
Just to chime in - I also have the same problem connecting to my work wireless network but I think because it uses a SEPARATE authentication scheme.
The way my office WLAN work is like this:
1). Connect to the WLAN with SSID "Office", no encryption password required
2). Once the Tab is connected, it WILL receive an IP address
3). Open up a browser (Dolphin, etc.) and try to go to any website (Google, etc.)
4). Instead of going to the website I typed in in no. 3, an authentication page will show up
5). I need to enter my Windows AD account and password
6). If its successful, then I can start browsing the Internet (but not going to the Internal network, that requires VPN access).
Step 3 is where the Tab FAILED to do so. It just doesn't want to get redirected to the authentication page.
Click to expand...
Click to collapse
Yep, same way for me at work. OP did you try to manually add the wireless info vs letting the tab "find" the access point?
lanwarrior said:
Just to chime in - I also have the same problem connecting to my work wireless network but I think because it uses a SEPARATE authentication scheme.
The way my office WLAN work is like this:
1). Connect to the WLAN with SSID "Office", no encryption password required
2). Once the Tab is connected, it WILL receive an IP address
3). Open up a browser (Dolphin, etc.) and try to go to any website (Google, etc.)
4). Instead of going to the website I typed in in no. 3, an authentication page will show up
5). I need to enter my Windows AD account and password
6). If its successful, then I can start browsing the Internet (but not going to the Internal network, that requires VPN access).
Step 3 is where the Tab FAILED to do so. It just doesn't want to get redirected to the authentication page.
Click to expand...
Click to collapse
One of the ones we have at work is the same, but not the one I primarily use. That is my backup lol...
otamctech said:
Yep, same way for me at work. OP did you try to manually add the wireless info vs letting the tab "find" the access point?
Click to expand...
Click to collapse
I did, nogo...
Also, here is a strange thing. About 2 hours ago it notified me there were wireless networks in range, and then showed me 2 random networks from another office. Suddenly, it saw nothing again. Then about 5 minutes ago, while I was in the bathroom ( ), it suddenly showed me ALL of the surrounding networks. Yay! I tried to connect to the one I use, it took my password, but never even attempted to connect. Then, they are gone. Now it doesn't see them.
What. The. Fuuuudge.
Hello all,
While going through the initial set up stage of a new rom on my Galaxy S2 I wasn't able to connect to my wifi, the rom simply didn't see any wifi points so I carried on and skipped the Google account bit as I didn't want any settings or apps being downloaded over 3G.
Once the rom was set up I was able to connect to my home wifi and then entered my Google account details. I then downloaded all my apps but my list of previously connected wifi ssids has disappeared. Any other time I have installed a rom, and that is many on quite a few phones, the list of wifi connections is always downloaded from Google along with all my other settings but I assume due to not connecting to wifi at the start of set up I haven't got any of my old wifi connections back. This includes my work wifi which is to say the least a pain to get set up.
Short of reinstalling the rom and hoping I can connect to wifi this time is there a way of downloading my old wifi connection details?
Sewrizer said:
ok. this is quite simple IF you restored the old rom.
enter recovery mode, go in backup and restore, choose restore then restore the rom in which you had all the SSIDs.
now go in play store and download "WiFi Pass Recovery & Backup"(free software). it will tell you all the passwords from the networks you connected to in the past. just write them down on a paper or in notepad, re-flash the desired rom and when you are in the area of any network you can connect using the password you wrote down. i can't think of another method. hit thanks if this helped.
good luck:laugh:
Click to expand...
Click to collapse
Yeah I had thought of that method but was hoping for something a little simpler! LOL. Thanks anyway, this looks like the only way to do this.
Better alternative!
Sewrizer said:
...go in play store and download "WiFi Pass Recovery & Backup"(free software). it will tell you all the passwords from the networks you connected to in the past
Click to expand...
Click to collapse
This works but TrustGo Inc. Antivirus & Mobile Security tells me that it may collect privacy information like IMEI, device model and email account.
Better use this one without security issues: WiFi Key Recovery :good:
Problem solved. I reinstalled the rom but instead of selecting "Reboot" at the end of the install I held the power button in until the phone then went back into recovery. I then installed the latest Dorimanx kernel and rebooted. Dori 9.12 seems to have problems picking up wifi whereas 9.13 has no problems. My home wifi was picked up at the start of the set up and from then on Google reinstalled apps and settings. Or at least is in the process of doing so!
I was a little worried as skipping the wifi set up at the start of my first install meant that there was no email address in the Backup and Restore field within Settings so although the backup and restore boxes were ticked without an email account they may as well have been unticked.. No way to add an email address either.
Thanks for the suggestions, as ever very helpful folks on XDA!
hello, everyone!
my bad if this post is misplaced but couldn't really find a good answer to my specific problem.
basically, i lost my sgs3 today. it had no security apps like android lost, lookout etc. installed and neither wifi nor mobile data were on. have installed from my desktop android lost, but since the phone has no internet connection i don't see how this app can ever be pushed onto the phone.
so basically, my question is if there is anything to be done here? perhaps any code or instruction sent by sms that would trigger the mobile data on!!! i don't suppose so!
anyway, whatever you might think of, i'd appreciate any help!
i'll call the gsm provider at some point to deactivate the sim, unless i can find a way first to locate the phone using their network signal.
many thanks!
Hello.
My T699 started to switch to EDGE, I couldn't make any call. Tried hardreset (wipe all data from recovery menu), it helped for a moment, but after that it got even worse (can't find any mobile network).
Please help. How do I fix this?
Tacis said:
Hello.
My T699 started to switch to EDGE, I couldn't make any call. Tried hardreset (wipe all data from recovery menu), it helped for a moment, but after that it got even worse (can't find any mobile network).
Please help. How do I fix this?
Click to expand...
Click to collapse
You didn't change SIM-card and/or location? Maybe your modem is dying.
Switched to GSM only. Seems to work that way for a month. But I would really like to get 3G back. Any suggestions?
I had a problem like that once after flashing a rom and messed with my access point names and I was able to get 3G/4G after that. I found the info via searching, I believe.
settings -> more settings -> mobile networks -> access point names
I made a new one and it worked for me. I looked up settings online and tried a different one than what was in there. I'm still using epc.tmobile.com but most of my searching told me to use fast.t-mobile.com, iirc. It's been a long time but I think making the epc one is what fixed my issue. It's worth a try.
It can be too complicated to search through the network access points. Take T Mobile for example. They have literally hundreds of available networks you may find listed, but they're quite different. Rather than trying to figure all that out, and it really sounds like matters got complicated for you, I would just flash in the original software. The firmware for any Galaxy S Relay I believe should currently be the same as T Mobiles version running Android 4.1.2. The Build number for that is, T699UVBOH1. You can find the firmware here, https://samsung-firmware.org/downlo...-T-Mobile-__/8k20/TMB/T699UVBOH1/T699TMBBOH1/
Take note that the firmware is listed as Android 6.0.1, which is incorrect. I have no idea why it's listed as such on an official Samsung page and have written to them about the error. Flash it to your device via Odin3. For this device I use Odin3.07 or 3.09.
Hi all,
I've been trying to get family link working as my daughter uses this tablet. When trying to add her account the setup gets stuck in an endless loop never competing. Having read various threads from other devices, I think it's probably something to do with play services not having certain permissions. I would consider unlocking, installing twrp, magisk etc if required to fix, but I don't want to loose widevine.
The long and short is I can't use her account on the device at all as she's part of the family group - her account won't work at all without family link.
I wondered if anyone here had either tried this, or come across other odd behaviours relating to play services?
I'm running the Chinese ROM ziu 13.
Appreciate any thoughts.
Cheers Matt
Few things I have tried (and eventually got it to work) across 2x Lenovo P11 Plus (J616F)'s:
1st one was a factory reset and then instead of using my home WiFi, setup the device using a 4G hotspot from my phone. (Not a clue why, but my Home Wifi (Unifi Access Points) takes upwards of 2 minutes to get internet with the Lenovo's, even though all other devices are fine).
Second method:
factory reset and setup the device as "Offline" (i.e. dont input any WiFi details, button down bottom right saying "Setup as Offline")
Once gone through initial steps, connect to your WiFi, give it 10 minutes to update a few bits.
Open Play Store (DO NOT SIGN IN!), and press the three dots at the top right and goto updates
Let the device update all apps
When complete, try adding the childs Google Account (again, if this fails, try using a 4G hotspot from another device (disabling Wifi on that device first))
Hope that helps
Ok, that sounds pretty strange but I might give it a go. I just set her up a new Google account as nothing I could do could get the old one logged in. Thanks for your advice.
I suspect your unifi is running a shared ssid and your 5ghz is on an inaccessible band, are you always connecting at 2.4ghz? I had to change the 5g band on mine to even see it!
mdurkin said:
Ok, that sounds pretty strange but I might give it a go. I just set her up a new Google account as nothing I could do could get the old one logged in. Thanks for your advice.
I suspect your unifi is running a shared ssid and your 5ghz is on an inaccessible band, are you always connecting at 2.4ghz? I had to change the 5g band on mine to even see it!
Click to expand...
Click to collapse
Only have my 5Ghz on normal bands (i.e. non DFS), even tried a separate 2.4Ghz Guest network, disabled WPA3, all to no avail. Not got a clue what caused it, my ISP doesn't block anything either (Zen UK)
Any other device was fine over WiFi (have setup much older Samsung tablets, newer kids phones) all with Family Link, it was just the Lenovo's that was stuck in a loop saying I needed to remove and re-add the account.
Just couldn't figure it out, and had already spent a few hours trying. Hoped the newest firmware would fix, but that didn't help either.
Hope it helps and good luck
Just playing around on the tablet and it appears that it struggles with IPv6 - could be that my hotspot is IPv4 only. Could be related to the loop it gets stuck in?
Not sure why it doesn't like IPv6 though as all other devices are fine with it...
I've just gone through full reset, then tried using 4g hotspot as you suggested. I have to use Lenovo app centre to get play store, then use play store with no login to update. That all works fine. Then add my daughters account. Then I get stuck in the same loop of not being able to register the device with family link.
In my case, I don't think this relates to internet access, I think there's something going wrong with the software / permissions on the device. It's genuinely very frustrating as I imagine it's probably not terribly difficult for the Lenovo Devs to fix.