Got my GT7+ yesterday and have a couple questions. Brightness? WiFi? - Samsung Galaxy Tab Plus

Edit: This is the Galaxy Tab 7 Plus 4G w/ TMobile...
So far I am loving it. I have had a plethora of Android tablets, including the Galaxy Tab 10.1 (until yesterday), and the original 7" Tab. Here is an issue I have not run into thus far...
Issue 1: I like my brightness settings to be %100 all the time. I always (almost) have a power cable with me, so I'm not worried about the drain. I have the auto setting turned off as to keep it from adjusting on it's own. However, everytime I open the status menu with the brightness slider, it is down to about %90-%95. I can't get it to stay on full. Also, and even more annoying, every time I open the browser, the brightness drops to like %30'ish and I have to open the status menu and slide it back up. The browser is where I REALLY need the full brightness the most, and it's the biggest issue.
I noticed this out of the box, adjusted settings, nogo, so I factory reset, and same issue. This is leading me to believe this is just a setting or something I am missing. Any ideas?
Issue 2 (THE BIG ONE): This Tab 7+ can't see my work wifi. It connects to my wifi at home just fine (did last night at least), which is also WPA, but it doesn't even see the one at work. It acts like it isn't there. In fact, and this is probably important, it is not seeing any networks up here, and there are at least 10-15 that should be visible from my location in the building (all but a couple from other companies). My G2x (Android 2.3) is connected to my work wifi just fine, and it sees all the others around us, the the Tab 7+ right next to it sees none. I also turned on the wifi router on my phone, it will not see that one either. I've verified the wireless is enabled, as well as turning it off and on multiple times and many reboots, nogo... I need it to hit the wifi at work and home so it isn't sucking my 4G data, so this is a big issue for me.Any ideas? I'm at a loss...
Also, to answer before it's asked: Nope, it's not rooted. I may do this at some point (as I do most of my devices), but for the moment I want to leave it stock and not mess with it. These issues seem like they should be resolved/nonexistant in the stock ROM, so I shouldn't have to root to fix them. Please tell me if this is incorrect...
Thanks for any help, sorry for the long post...
(pardon typos, I'm at work and multitasking, no time to proofread)

on the brightness broweer tip. use a different browser. its a known issue that the stock browser automaticaly dims the screen.

otamctech said:
on the brightness broweer tip. use a different browser. its a known issue that the stock browser automaticaly dims the screen.
Click to expand...
Click to collapse
Thank you... You're right, it doesn't happen in Dolphin, however I am one of those weird people the really prefers the stock browser...
The biggest issue is the wifi not showing up. I am updating that issue with more info now...

what channel is the wireless network on? i had a similar problem on my windows laptop, it cannot see the wifi.. turned out that my wireless card(the driver actually) cannot see any wireless network beyond channel 12.. who knows you're having the same problem, might worth checking.

gingerboy92 said:
what channel is the wireless network on? i had a similar problem on my windows laptop, it cannot see the wifi.. turned out that my wireless card(the driver actually) cannot see any wireless network beyond channel 12.. who knows you're having the same problem, might worth checking.
Click to expand...
Click to collapse
Ours is on 6... Thanks though

for me it was the opposite, it could see my home wifi, but not my work.
only was to solve it was to setup a static ip at work for the GT7...
I called samsung, they said its a problem with some routers. No eta on fix other than static IP.

Shftup said:
for me it was the opposite, it could see my home wifi, but not my work.
only was to solve it was to setup a static ip at work for the GT7...
I called samsung, they said its a problem with some routers. No eta on fix other than static IP.
Click to expand...
Click to collapse
........

Just to chime in - I also have the same problem connecting to my work wireless network but I think because it uses a SEPARATE authentication scheme.
The way my office WLAN work is like this:
1). Connect to the WLAN with SSID "Office", no encryption password required
2). Once the Tab is connected, it WILL receive an IP address
3). Open up a browser (Dolphin, etc.) and try to go to any website (Google, etc.)
4). Instead of going to the website I typed in in no. 3, an authentication page will show up
5). I need to enter my Windows AD account and password
6). If its successful, then I can start browsing the Internet (but not going to the Internal network, that requires VPN access).
Step 3 is where the Tab FAILED to do so. It just doesn't want to get redirected to the authentication page.

lanwarrior said:
Just to chime in - I also have the same problem connecting to my work wireless network but I think because it uses a SEPARATE authentication scheme.
The way my office WLAN work is like this:
1). Connect to the WLAN with SSID "Office", no encryption password required
2). Once the Tab is connected, it WILL receive an IP address
3). Open up a browser (Dolphin, etc.) and try to go to any website (Google, etc.)
4). Instead of going to the website I typed in in no. 3, an authentication page will show up
5). I need to enter my Windows AD account and password
6). If its successful, then I can start browsing the Internet (but not going to the Internal network, that requires VPN access).
Step 3 is where the Tab FAILED to do so. It just doesn't want to get redirected to the authentication page.
Click to expand...
Click to collapse
Yep, same way for me at work. OP did you try to manually add the wireless info vs letting the tab "find" the access point?

lanwarrior said:
Just to chime in - I also have the same problem connecting to my work wireless network but I think because it uses a SEPARATE authentication scheme.
The way my office WLAN work is like this:
1). Connect to the WLAN with SSID "Office", no encryption password required
2). Once the Tab is connected, it WILL receive an IP address
3). Open up a browser (Dolphin, etc.) and try to go to any website (Google, etc.)
4). Instead of going to the website I typed in in no. 3, an authentication page will show up
5). I need to enter my Windows AD account and password
6). If its successful, then I can start browsing the Internet (but not going to the Internal network, that requires VPN access).
Step 3 is where the Tab FAILED to do so. It just doesn't want to get redirected to the authentication page.
Click to expand...
Click to collapse
One of the ones we have at work is the same, but not the one I primarily use. That is my backup lol...
otamctech said:
Yep, same way for me at work. OP did you try to manually add the wireless info vs letting the tab "find" the access point?
Click to expand...
Click to collapse
I did, nogo...
Also, here is a strange thing. About 2 hours ago it notified me there were wireless networks in range, and then showed me 2 random networks from another office. Suddenly, it saw nothing again. Then about 5 minutes ago, while I was in the bathroom ( ), it suddenly showed me ALL of the surrounding networks. Yay! I tried to connect to the one I use, it took my password, but never even attempted to connect. Then, they are gone. Now it doesn't see them.
What. The. Fuuuudge.

Related

WiFi internet issue on WM6

I`ve got a T-Mobile MDA with WM6 and I cannot access the internet through WiFi. The access point that I connect to is working cause I am able to access the net fine on my laptop. I made sure that my network cards are set to connecte to the internet. I even did a softreset after I made the changes.
My internet explorer just sits there on locating. I am not sure if its just my WiFi card configured incorrectly within WM6 or if its a reg setting that isn't set right.
If anyone had this issue before and got it fixed let me know or give me some direction to start.. thanks in advance for your help.
This is a fairly common problem. For me disabling the Wireless G option in the registry did the trick:
Registry: HKLM\COMM\TNETWLN1\PARMS
Key: dot11SupportedRateMaskG
Value: 1
so I diabled it, soft restet, verified that the reg change sticked, which it did. I tried to access the net again with no go.
me too
I have the exact same problem.
Not much discussion about this
I tried the G fix. Didn't work. Funny thing. It started when I installed MB. Downgrading DIDN'T fix it.
Try setting the the Network Card to connect to "The Internet" instead of "Work"
they are set to that..
That actually worked for me. (The Internet instead of work fix) I also made sure that all the boxes for "Server assigned IP address were checked. I could have sworn I tried that already. I wonder if it will stay "fixed". I'm due for a soft reset...seems to be working. I've been thinking all along it was some stupid setting.
EclipsedMotions said:
they are set to that..
Click to expand...
Click to collapse
check the change your dns to 4.2.2.1 and 4.2.2.2 this may fix your problem
R
Changing to Internet and setting the DNS doesn't seem to help. Funny thing is, GMail via Midlet Manager seems to work (maybe its doing GPRS?). But IE just spins at Locating...
wifi internet issue on wm6
although i have the older version of t-mobiles' mda (wm5), i had similar issues connecting to the net even it sees a lot of wireless aps. either i cannot hold a steady connection or cannot connect at all. the solution i had was changing the channel on my wireless ap and updating my mda's parameters for my local wireless security. now i can go to the web using my mda even with poor signal quality. It is possible that you have several wireless ap's at your location sharing the same channel. hopefully changing the channel solves your problem.
simple possible solution, but check the proxy settings? I know with cingular, many people had trouble browsing the internet due to the MediaNet proxy settings. they removed the proxy settings and everything was fine then.
There is a known issue with your rom your running...there has been a new release. check the MB thread and you will see a recent listing about a 6 and 4 mb page pool, the wifi has been fixed.
mfrazzz said:
Changing to Internet and setting the DNS doesn't seem to help. Funny thing is, GMail via Midlet Manager seems to work (maybe its doing GPRS?). But IE just spins at Locating...
Click to expand...
Click to collapse
I have the original MB edition and I do not have any wireless problems. I know he had to fix the re-released versions as the wifi did not work with them initially, but I was unaware of a wifi problem with the initial release.
WIFI problem don't even see networks
Hey everybody, still loving this phone and its diversity, but have flashed this little piece of hardware with the mb 4mb/6mb wm6 rom only to find that WIFI can't even be turned on!. And yes I've downed the fixed versions from a certain forum. When I turn on WIFI, It just gives the symbol in the top straight away. It just can't find the networks. I even manually added a network, it then tries to find it, but simply can't. WEIRD hey.
Is there a solution for this problem, cause I really, like the look and feel of the wm6 roms over the wm5 roms.
bye all and thanks in advance for the kind replies.
Did you try using WiFiFoFum at all to see if it can find networks? I have not had any issues with WiFi with the Most Beautiful edition whatsoever. Only thing I notice is that when the machine first turns on or right after a soft reset that I need to click the comm manager icon for wifi twice before wifi will turn on. Otherwise it finds and connects to networks perfect.
Problem with MIE
i have no problem to connect to my homenetwork with WIFI, but i cannot access the internet with the internet explorer. but it works perfect with the opera browser!
hmmm..
It's weird...
I never access the internet with the internet explorer even my wifi was connected successfully while I brushed wm6 rom.
A miracle has happened Today.
I install a WIFI Device for WM5, that one is simple Chinese language.
I tried to turn on the wifi but not work.
Then I uninstall it -> restar....
Then I tried one more time to turn on wifi, ok, it's work to connect but still can't open the web page.
I check the wireless lan, switch the power save mode to best performance.
Then....I can open web page????
Wow~~ I don't know it work cause the wifi device change something or just swtich to best performance.
Maybe you guys can try.
(Sorry to reading my poor English)
thomas.iseli said:
i have no problem to connect to my homenetwork with WIFI, but i cannot access the internet with the internet explorer. but it works perfect with the opera browser!
Click to expand...
Click to collapse
Same exact issue. Pocket IE doesn't work, Opera does. Did you figure it out or get it corrected yet?
oops, double-posted

School wifi problem

Just got my Samsung Captivate about a month and I got my wifi connected to the school network, but when i open the broswer or any apps need internet i didnt get any connections? at the first week it works.. and when connecting to the school wifi it should be come out with the school login page,, then the internet will work.. however the wifi is connected doesnt matter how strong the wifi singal is.. it just cant load and cant bring me to the login page..
I really need help..
and the wifi works everywhere.. except my school...
btw my friends iphone 3gs works..
I am also at college and have had the same problem. the best reason I have found is the phone itself. half of our wifi is an older standard that does not work on the phone. it shows up as wep and i can not get it to recognize it as 802.1x . in my tinkering I have also messed up the wifi that was working.
long story short it probably won't work. I have spent a long time trying to get it to work with no luck
Sent from my SAMSUNG-SGH-I897 using XDA App
Hello to both of you,
I also attend a college with an 802.1x connection and the captivate supports most of these networks; however you will probably need to configure the network settings manually (usually retrievable on your schools IT site). If you dont mind digging up your settings I would love to check to see if I can configure your phone.
FYI, you might be having a problem similar to what's seen in this post.
http://androidforums.com/captivate-support-troubleshooting/142397-odd-netmask-issues-wifi.html
I definitely had this problem today. It appeared connected but no web pages would load. Going to have to investigate further. Why can't things just work
I know my school recently implemented some new security certificates that you must agree to before logging in, has anything like that changed for you? My wife's Aria is running 2.2 and can log into the school network, but my captivate cannot. It is frustrating I know.
Seems some colleges and universities are noticing issues with android devices letting the DHCP leases to expire but keeps using the IP address assigned instead of requesting a new one.
See the following links.
h t t p ://www . natecarlson . com/2010/08/27/android-att-captivates-wifi-networking-is-broken/
h t t p ://www . net . princeton . edu/android/android-stops-renewing-lease-keeps-using-IP-address-11236.html
I actually have similar issues with my Belkin wireless router at home. My laptops and other wireless devices have no problems connecting or re-connecting but the Captivate just refuses to re-connect after the connection was terminated. Even after resetting the router, the phone just keeps trying to use the same IP address for some reason.
The only way I could get it to reconnect is to either reboot the phone or to remove the AP entry which is a pain especially if you have wireless passwords.
Hopefully someone with better insight into how Eclair and Froyo handles WiFi can come up with some fix.
more solutions?
I believe the new 2.2 firmware solves this issue. I too am at College and my captivate FAILS to actually access the internet through wifi unless I statically assigned the IP.
I just updated to Froyo and it connected instantly. I'll have to do more testing to make sure, but I think Samsung finally fixed it.
captivate wifi issue at school
i just got Galaxy S (Captivate) and wi-fi is giving trouble.
when i tried at a university campus, it gives error and says can't open and try again later. it is like, i get connected to the network, IP and DNS and everything is generated. But when i open browser to open a website, instead of taking me to login page it gives the above error.
here is what i get when i try to open a website.
'web page not available'. the page might be temporarily down or it may have been moved permanently to new address.
here are some suggestions:
- check to make sure device has signal and data connection. (I made sure it is connected to wifi)
- reload page later. (i tried after 5 mins, same result)
- view cached copy from google. (doesn't work either)
i am not able to understand why is this happening. i tried restarting the phone after connecting to wifi but no luck. any pointers?
Sounds like they use a portal system which requires logon and doesn't play nice with the Captivate's browser. Unfortunately many such portal systems are written poorly and I've even seen some that only work with Internet Explorer.
You could try a different browser on the Captivate. Dolphin allows spoofing assorted User Agents, which might help.
Hey guys, I have the same problem connecting to m school's network login page. It would say connected but the website always says cant be found. But the good news is that I found a way to connect to it manually! What you need is your captivate and friends iphone 4 or 3gs. First have use your friends iphone to connect to the wifi and then go into wifi settings. You should see 2 DNS address, Ip address, netmask (subnet mask) and router address. Now jot those addresses down except the ip address. Go to settings->wireless and network->Wi-Fi settings->now tap the bottom left button under the samsung logo and click advanced. Now check use static ip. Do not enter anything for your ip address just yet (we will do this last). Now enter router address into gateway, subnet mask into netmask, DNS1 to DNS1 and DNS2 to DNS2. ok when you are done click back and tap the network you want to connect to. Once you are connected jot down your ip address by taping the network once more. now go back to where the static ip was and input the ip address you just jot down into the ip address underneath use static ip. Disconnect and reconnect to the desired network. You may have to do this a few times or reboot your phone. This has been working for me so far around different buildings but with the same school network connection. I hope this helps cheers!
sremick said:
Sounds like they use a portal system which requires logon and doesn't play nice with the Captivate's browser. Unfortunately many such portal systems are written poorly and I've even seen some that only work with Internet Explorer.
You could try a different browser on the Captivate. Dolphin allows spoofing assorted User Agents, which might help.
Click to expand...
Click to collapse
Yeah, my school uses the Bradford dissovable agent. Funny thing is, some connections work perfectly, others not at all. Technically none should work, and sometimes I feel that maybe I should tell them that sometimes somehow it is possible to bypass the whole agent thing- but why rock the boat just yet
Does it need a proxy to work? If so, this app is amazing.
http://forum.xda-developers.com/showthread.php?t=766569
I figured it out a month ago, and it is actually petty easy. But you really have to change ip address manually, usually just the last number.
Sent from my SAMSUNG-SGH-I897 using XDA App

TF300T Tethering Hell: USB, WiFi, Take your pick...

Hey guys If I am in the wrong place, please let me know. I got my TF300T just a little while ago and am now trying to use it as a my main computer. That requires me to able to connect to the net on it. It works just fine when I am connected to a regular WiFi network. However, I have no Internet connection at home except for my Sprint Motorola Photon Q, which I had been using tethered over USB to my PC to get the PC online. That worked fine. But this past month, I lost my job and needed to sell the PC, so all I have left is the TF300T. I was sure it'd work fine since I got BT tethering to work fine in the past with that phone. However, I was just experimenting at that point. Now, I see it's a little more ... complicated:
I set my Photon Q to act as a WiFi hotspot using PDANet+ a.k.a. FoxFi. Creating a WiFi hotspot, I can see it on the TF300T. Whether I enter the right PSK2 key or don't use encryption at all, connecting is impossible. It will "Authenticate...." after a minute or so and then try to get an IP via DHCP. Then it will "work" a long time and then drop the connection and try again. This is with the phone an inch away. I found it had a lot of trouble just getting an IP, so I tried setting it up with a static IP. I found out that PDAnet+ seems to default to 192.168.43.111 and the gateway is presumably 192.168.43.1. I tried some other things like .100 without luck. It WILL connect but the WiFi strength indicator in the bar stays gray. It shows up and down arrows as though there's activity, and Excellent strength, but won't actually work in any apps, incl. the default Android browser. Also tried pinging the host phone using the terminal only to get Destination Host Unreachable errors.
I then tried Bluetooth tethering. It will connect and works at a decent rate. But, the only programs that work are web browsers! IM clients, Skype, Google Play, Maps, Gmail, nothing else can connect. Android is convinced I am not online at all, yet I can browse web pages at full speed, which I am doing right now. IIRC PdaNet uses some bizarro proxy setup but they tell you on their site to "configure the proxy settings" and give you none of the details like IP or port! How useful. So, this does me little good. It's horribly crippled.
I tried numerous other WiFi tether apps, most of which hard crash the Photon Q so it reboots entirely the moment it turns on the hotspot. Barnacle and one of the WiFi tether apps (1-click? I've tried so many I can barely remember...) will launch, I can see it on the TF300T, but when I try to connect it says "ANDROIDTETHER or whatever the SSID is, Saved". No matter how many times you choose Connect or Forget, then Connect again, nothing. Gets stuck at "Saved."
I'd try connecting the phone via USB via the TF300T dock but I have searched heavily and cannot find any way to do it. Do I have any options at all?
Thank you for any info.
Hi
I'm tethering Internet from my SGS 1 with 4.2.2 rom with no problem at all. I think you have problem with wifi settings.
Try to set both phone and tab wifi to correct region. If you have phone set to USA and tab to Europe it won't work. You'll find it under Wireless-advanced if you have customised roms, for stock I don't know how to set it. Haven't have stock roms for ages.
About proxy, basic proxy settings in Android works only for browser, so you will need something like proxydroid on your client. I'm using it and for me it is working. For settings, check your phone settings-mobile networks-access points and copy them from there, or call your ISP and ask them for settings.
Hope this helps.
WiFi tether for root users. Is the best thing ever. If you aren't rooted. Root your phone. Also, is there a cm ROM available for your phone? If so, switch. Then use it's default tethering. Your phone is definitely the culprit here.
Sent from my SGH-T999
"So I put my phone into airplane mode and threw it... worst transformer ever. -.-" -My friend
Unfortunately no CM ROM exists for that phone. It is rooted. I tried wifi tether for root-- played with all the settings.... it will turn on and the SSID shows up on the TF300T .. but if you try to connect it just says "Saved." Even though it also says Signal quality is "Excellent"...
I don't get it at all.
Epicenter714 said:
Unfortunately no CM ROM exists for that phone. It is rooted. I tried wifi tether for root-- played with all the settings.... it will turn on and the SSID shows up on the TF300T .. but if you try to connect it just says "Saved." Even though it also says Signal quality is "Excellent"...
I don't get it at all.
Click to expand...
Click to collapse
Try different profiles. I tried my EVO LTE last night for 2 hrs. Tried all generic settings. I ended up switching it to sg3 profile same chipset as mine. Worked fine after that.
Sent from magical jelly bean.
Epicenter714 said:
Unfortunately no CM ROM exists for that phone. It is rooted. I tried wifi tether for root-- played with all the settings.... it will turn on and the SSID shows up on the TF300T .. but if you try to connect it just says "Saved." Even though it also says Signal quality is "Excellent"...
I don't get it at all.
Click to expand...
Click to collapse
kaos420 said:
Try different profiles. I tried my EVO LTE last night for 2 hrs. Tried all generic settings. I ended up switching it to sg3 profile same chipset as mine. Worked fine after that.
Sent from magical jelly bean.
Click to expand...
Click to collapse
Yep exactly what kaos said. I had that issue with my HD2 doing exactly what you said. Would "save" but never connect. I ended up using something like the nexus profile or something.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
elesbb said:
Yep exactly what kaos said. I had that issue with my HD2 doing exactly what you said. Would "save" but never connect. I ended up using something like the nexus profile or something.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Great suggestions guys! I seem to be making some progress. I can now "connect" and get an IP, but the "wifi signal" bar thingy in the lower-right stays gray, not blue like it usually is when on working WiFi, and apps still cannot get to the net, which I assume is what the gray means (network connection but no internet connection). I will have to go down the list and try every possible configuation, I suppose. Yikes! I'll keep at it...
Thank you!
Epicenter714 said:
Great suggestions guys! I seem to be making some progress. I can now "connect" and get an IP, but the "wifi signal" bar thingy in the lower-right stays gray, not blue like it usually is when on working WiFi, and apps still cannot get to the net, which I assume is what the gray means (network connection but no internet connection). I will have to go down the list and try every possible configuation, I suppose. Yikes! I'll keep at it...
Thank you!
Click to expand...
Click to collapse
Nice. Now you need to connect to proxy.
stenc55 said:
Nice. Now you need to connect to proxy.
Click to expand...
Click to collapse
This may sound dumb, but how do I do that? I guess I need to set it globally in Android and not per-app because most apps don't let you set one. Thanks!
Epicenter714 said:
This may sound dumb, but how do I do that? I guess I need to set it globally in Android and not per-app because most apps don't let you set one. Thanks!
Click to expand...
Click to collapse
Im using ProxyDroid. But you need to have rom with root and iptables enabled. Official CM10.1 doesn't have it, unofficial from Surdu_petru does.

WiFi?

Hi,
Why am I getting this notification for the 1st time in approx 2 months that have got a OPO, despite that am connected to WiFi?
Hoping to hear from you experts.
Thanks.
This sort of thing normally pops up when the WiFi network wants you to go to some sort of page, this is usually for a login to free WiFi hotspots, I assume this Dlink is your WiFi? Perhaps it wants you to open this page to change a configuration or login. This doesn't seem to be Android related at all but more to do with your router, could you try tapping on the notification and screenshot the page it opens, if any.
He's right. This looks like a router setting that you might have turned on like guest mode.
oscarandjo said:
This sort of thing normally pops up when the WiFi network wants you to go to some sort of page, this is usually for a login to free WiFi hotspots, I assume this Dlink is your WiFi? Perhaps it wants you to open this page to change a configuration or login. This doesn't seem to be Android related at all but more to do with your router, could you try tapping on the notification and screenshot the page it opens, if any.
Click to expand...
Click to collapse
Thanks for replying, appreciate your expert views.
DLink is my WiFi and not a hotspot WiFi, never occurred earlier.
When I tap on it, G chrome takes me to 173.194.35.96/generate _204
Google results of this IP......173.194.35.96 which is Spy-IP.com
and Google has different results for this 173.194.35.96/generate _204
It never happened earlier in the past 2 months.
Been using the same OPO and same WiFi.
Any solutions to resolve it?
Thanks again and Best regards!
kokocabana said:
He's right. This looks like a router setting that you might have turned on like guest mode.
Click to expand...
Click to collapse
Like WPS or WiFi ON/OFF on the router?
Micheal1122 said:
Thanks for replying, appreciate your expert views.
DLink is my WiFi and not a hotspot WiFi, never occurred earlier.
When I tap on it, G chrome takes me to 173.194.35.96/generate _204
Google results of this IP......173.194.35.96 which is Spy-IP.com
and Google has different results for this 173.194.35.96/generate _204
It never happened earlier in the past 2 months.
Been using the same OPO and same WiFi.
Any solutions to resolve it?
Thanks again and Best regards!
Click to expand...
Click to collapse
This is a router setting then, that page is some sort of login. Perhaps guest mode has been enabled on your router? Try this:
Settings>Wi-Fi>Modify Network>Show advanced options> Change DHCP to Static. Here, find the box that says Gateway and note the IP here. Now change Static back to DHCP and close this menu.
Go into the browser on your OPO and put in this Gateway IP, this will take you to the router config. The login for this is usually on the bottom of the router, otherwise the default can be found by searching the router model number, try finding a guest mode setting and turning it off - I really don't know... You can also change your WiFi name and password here if you like
I can't really help you any more than that.
oscarandjo said:
This is a router setting then, that page is some sort of login. Perhaps guest mode has been enabled on your router? Try this:
Settings>Wi-Fi>Modify Network>Show advanced options> Change DHCP to Static. Here, find the box that says Gateway and note the IP here. Now change Static back to DHCP and close this menu.
Go into the browser on your OPO and put in this Gateway IP, this will take you to the router config. The login for this is usually on the bottom of the router, otherwise the default can be found by searching the router model number, try finding a guest mode setting and turning it off - I really don't know... You can also change your WiFi name and password here if you like
I can't really help you any more than that.
Click to expand...
Click to collapse
Thanks for all your expert assistance, now you have given me options shall resolve it.
and keep you updated.
Best regards!
Btw factory reset reflash could help too?
Another strange thing all internet/WiFi related apps work fine including G Chrome and Mail in it but no GMail..........
Micheal1122 said:
Thanks for all your expert assistance, now you have given me options shall resolve it.
and keep you updated.
Best regards!
Btw factory reset reflash could help too?
Click to expand...
Click to collapse
Glad to hear, I am strongly advising against the factory restore. This is a feature of Android, although it is strange for it to be happening in this circumstance there is nothing it will achieve.
oscarandjo said:
Glad to hear, I am strongly advising against the factory restore. This is a feature of Android, although it is strange for it to be happening in this circumstance there is nothing it will achieve.
Click to expand...
Click to collapse
1. Changed router's password.
2. Guests mode is Off.
3. All apps working with WiFi except GMail and GPS.
4. Still see the notification.
5. Should WPS be Enabled, it is disabled at the moment?
6. You don't recommend a factory reset what about a re flash of 30 OR?
Thanks.
Your phone is working fine, it seems you have triggered some sort of bug in Android's WIFI login detection.
The system works by accessing DNS and check if the resulting IP is owned by google.com or some network-internal redirection/replacement by a login page.
Now, the IP 173.194.35.96 is owned by Google, so the DNS lookup obviously worked perfectly but for some reason the phone gets an unexpected answer from that server. Which makes me guess to one of the 2 following options:
a) one of the computers in your network is infected and Google keeps showing the "Prove you're human" captcha window on requests.
b) your provider is replacing failed DNS lookups with it's own "helper" page which for some reason is making Android trip. If possible, change the DNS servers in your router to either OpenDNS or Google DNS.
Micheal1122 said:
5. Should WPS be Enabled, it is disabled at the moment?
Click to expand...
Click to collapse
That's entirely your choice. However I would only recommend enabling it if it's the "Push to WPS" method and not constantly on - WPS is broken and depending on your router it takes between 1 to 10'000 attempts (1 second to ~ 2 hours) to break into your WIFI. Not good!
d4fseeker said:
Your phone is working fine, it seems you have triggered some sort of bug in Android's WIFI login detection.
The system works by accessing DNS and check if the resulting IP is owned by google.com or some network-internal redirection/replacement by a login page.
Now, the IP 173.194.35.96 is owned by Google, so the DNS lookup obviously worked perfectly but for some reason the phone gets an unexpected answer from that server. Which makes me guess to one of the 2 following options:
a) one of the computers in your network is infected and Google keeps showing the "Prove you're human" captcha window on requests.
b) your provider is replacing failed DNS lookups with it's own "helper" page which for some reason is making Android trip. If possible, change the DNS servers in your router to either OpenDNS or Google DNS.
That's entirely your choice. However I would only recommend enabling it if it's the "Push to WPS" method and not constantly on - WPS is broken and depending on your router it takes between 1 to 10'000 attempts (1 second to ~ 2 hours) to break into your WIFI. Not good!
Click to expand...
Click to collapse
Thanks issue resolved.
Thanks issues resolved.
Thanks issue resolved.
oscarandjo said:
Go into the browser on your OPO and put in this Gateway IP, this will take you to the router config.
Click to expand...
Click to collapse
This resolved the issue.
Thanks again.

Hotspot issues with Android Pie

I am having issues regarding Wifi hotspot on Pie.
1. My laptop find it very difficult to find the hotspot. Sometimes I have to restart the hotspot 2-3 times before the network shows up on my laptop. On Oreo, this was always instant and worked immediatly.
2. In the last few days using a hotspot from the phone and my laptop I have had issues regarding DNS/internet. Even though my laptop is connected to the hotspot network, it doesn't have any internet access. When browsing the web on my laptop, all DNS requests always fails. It happens whenever I try to navigate to a site and tries to ping a url from CMD. But if I try to ping a ip address, let say 1.1.1.1, that works fine! I can also use my browser on my phone without any issues at all. The laptop works fine on any other network and the phone works well on its own but the hotspot causes great problems. It sounds to me that for some reason when using a hotspot, DNS requests doesn't come through properly. Also, if I connect to a VPN on my laptop, eveything works, even DNS requests but my VPN is somewhat unreliable so it constantly disconnects so that is not a viable solution for me.
Anyone experiencing similar problems? It's really annoying because now I can't get any work done on my daily commute.
Edit: It sounds similar to these problems: http://piunikaweb.com/2018/08/22/go...hotspot-tethering-issues-after-android-9-pie/
baxtex said:
I am having issues regarding Wifi hotspot on Pie.
1. My laptop find it very difficult to find the hotspot. Sometimes I have to restart the hotspot 2-3 times before the network shows up on my laptop. On Oreo, this was always instant and worked immediatly.
2. In the last few days using a hotspot from the phone and my laptop I have had issues regarding DNS/internet. Even though my laptop is connected to the hotspot network, it doesn't have any internet access. When browsing the web on my laptop, all DNS requests always fails. It happens whenever I try to navigate to a site and tries to ping a url from CMD. But if I try to ping a ip address, let say 1.1.1.1, that works fine! I can also use my browser on my phone without any issues at all. The laptop works fine on any other network and the phone works well on its own but the hotspot causes great problems. It sounds to me that for some reason when using a hotspot, DNS requests doesn't come through properly. Also, if I connect to a VPN on my laptop, eveything works, even DNS requests but my VPN is somewhat unreliable so it constantly disconnects so that is not a viable solution for me.
Anyone experiencing similar problems? It's really annoying because now I can't get any work done on my daily commute.
Edit: It sounds similar to these problems: http://piunikaweb.com/2018/08/22/go...hotspot-tethering-issues-after-android-9-pie/
Click to expand...
Click to collapse
@thugslug @jbm76 I know you guys had an issue with hotspot. Is this the same problem?
yldlj said:
@[email protected] I know you guys had an issue with hotspot. Is this the same problem?
Click to expand...
Click to collapse
Point 2 sounds like it..
jbm76 said:
Point 2 sounds like it..
Click to expand...
Click to collapse
I can't remember what thread you wrote the adb commands that might fix it? Was going to direct him to that post.
yldlj said:
I can't remember what thread you wrote the adb commands that might fix it? Was going to direct him to that post.
Click to expand...
Click to collapse
Yep that fixed for me ??
adb shell settings get global tether_dun_required
If the result is "null" or "1"
adb shell settings put global tether_dun_required 0
Reboot phone
yldlj said:
@[email protected] I know you guys had an issue with hotspot. Is this the same problem?
Click to expand...
Click to collapse
His first problem I don't have, but it's the second that's the same issue as mine.
Obviously he's never searched or he'd have found my lengthy post not very far back.
The solution is there too.
I've never tried turning the VPN on to see if I get through access to the internet that way. I can't now as I've applied the fix @jbm76 found, and I don't really want to back out the fix to try it.
Definitely an area where pie has gone backwards. For those of us affected anyway.
Edit.... Sorry, I didn't note that this was a new thread.
My post is in the OB4 thread (which I at first thought this was). I'm tired and didn't look well enough.
jbm76 said:
Yep that fixed for me ?
adb shell settings get global tether_dun_required
If the result is "null" or "1"
adb shell settings put global tether_dun_required 0
Reboot phone
Click to expand...
Click to collapse
I will try these and report back.
baxtex said:
I will try these and report back.
Click to expand...
Click to collapse
If you get errors at the cmd prompt make sure usb debugging is set 'on' on the phone.
Followed the commands and it seemed to do the trick! Many many thanks!
baxtex said:
Followed the commands and it seemed to do the trick! Many many thanks!
Click to expand...
Click to collapse
[emoji3][emoji3]
Most people it works straight away. What region are you in?
Sent from my SM-P605 using Tapatalk
jbm76 said:
[emoji3][emoji3]
Most people it works straight away. What region are you in?
Sent from my SM-P605 using Tapatalk
Click to expand...
Click to collapse
Sweden.
I want to remember that it did work before, then I have to reflash Pie again and that's when the issues started.
I still wanted to say that I still suffering from the first problem, having difficulties actually finding the hotspot at all.
Its very odd. This problem has started to arise again. I tried running adb shell settings get global tether_dun_required again but I get the answer that it is 0 so that looks fine. I haven't updated anything since I had this problem the last time.
Folks,
To provide some more info and more things to try if you are rooted (I am in the US on T-Mobile). These instructions should also help you avoid tethering detection using the standard Android tethering options if you wish to.
1) Go into settings --> system --> developer options and turn off Tethering hardware acceleration. This will make sure all tethering routing is done by Android at the software level and not by Qualcomm's chipsets (so following steps will apply).
2) As suggested, put global tether_dun_required 0. Note you can also do this from a command prompt by typing su (get root access) and typing setting put global tether_dun_required 0. What this does is route tething traffic over the same APN as phone traffic, and not the hidden tethering APN that some carriers put on the sim cards.
3) Install Change TTL and in settings set it to run a boot and set TTL to 64. This ensures that all traffic leaving your phone will have a TTL of 64 and look like it is coming from the phone. (I am pretty sure this also set's ipv6 hop limit, as TMobile in the US is all IPv6 and this hides traffic.)
Reboot. If you still have trouble -- try Android's USB option to see if it is WiFi related vs Tethering system related.
- Verify that global tether_dun_required is still 0 after reboot (it should be if you are rooted).
- Delete the WiFi entry on your computer and re-join the phone's network -- sometimes it is on your computer's side.
Another thing to try is Easy Tether -- this is a good USB tethering option that won't use Android tethering system and it is guaranteed to route traffic over the phone's network APN.
If the issue is DNS, you can isolate that by manually putting a DNS (8.8.8.8) into the tethered computer to see if that is the issue.
Also, google search xda VPN Hotspot. This app has a ton of options to change Android's tethering routing even if you are not using a VPN. This may also help you figure something out. You can activate tethering, then go in here and turn on the wlan interface and it should route traffic directly to that (which should be happening anyways because of tether_dun_required = 0).
Good luck!
MW
MetroWestMA said:
Folks,
To provide some more info and more things to try if you are rooted (I am in the US on T-Mobile). These instructions should also help you avoid tethering detection using the standard Android tethering options if you wish to.
1) Go into settings --> system --> developer options and turn off Tethering hardware acceleration. This will make sure all tethering routing is done by Android at the software level and not by Qualcomm's chipsets (so following steps will apply).
2) As suggested, put global tether_dun_required 0. Note you can also do this from a command prompt by typing su (get root access) and typing setting put global tether_dun_required 0. What this does is route tething traffic over the same APN as phone traffic, and not the hidden tethering APN that some carriers put on the sim cards.
3) Install Change TTL and in settings set it to run a boot and set TTL to 64. This ensures that all traffic leaving your phone will have a TTL of 64 and look like it is coming from the phone. (I am pretty sure this also set's ipv6 hop limit, as TMobile in the US is all IPv6 and this hides traffic.)
Reboot. If you still have trouble -- try Android's USB option to see if it is WiFi related vs Tethering system related.
- Verify that global tether_dun_required is still 0 after reboot (it should be if you are rooted).
- Delete the WiFi entry on your computer and re-join the phone's network -- sometimes it is on your computer's side.
Another thing to try is Easy Tether -- this is a good USB tethering option that won't use Android tethering system and it is guaranteed to route traffic over the phone's network APN.
If the issue is DNS, you can isolate that by manually putting a DNS (8.8.8.8) into the tethered computer to see if that is the issue.
Also, google search xda VPN Hotspot. This app has a ton of options to change Android's tethering routing even if you are not using a VPN. This may also help you figure something out. You can activate tethering, then go in here and turn on the wlan interface and it should route traffic directly to that (which should be happening anyways because of tether_dun_required = 0).
Good luck!
MW
Click to expand...
Click to collapse
Hi and thank you for your post. It seems that windows had changed dns settings by its own to something invalid, so that is why it didn't work. However I am still having connection issues. Mainly I find it very difficult to connect my laptop (and other devices) to the hotspot of the Oneplus 6.
1) Done.
2) Done.
3) It was already set at 64 but I tried setting in to 64 again.
DUN is still 0 after reboot. I have also removed the wifi from my PC and changed name on the hotspot. Also tried both 2.4 and 5 Ghz. When the pc is connected the hotspot, I can ping google succesfully, so internet works but not DNS, all requests in my browser times out. I have also tried setting DNS to external providers in the phone (not sure if if affects the hotspot though). I looked at easy tether but root version was pretty expensive. I also googled XDA VPN Hotspot but I'm not sure which app you mean. Do you have the link?
Right now I'm just thinking of factory resetting the phone and installing the latest oxygen version (I'm still on 9.0.0.0).
Here is even more testing:
What I am experiencing is that there are grave problems trying to connect when in an area with a lot of wifi networks.
I live on the countryside and I thought I would try using hotspot for a couple of times. Thing is, at home, sharing hotspot from the phone to my laptop always works instantly, both on 5Ghz and 2.4Ghz. I might add that there are basically no wifi networks interfering where I live, except for my own. When I start my bus ride in the morning from my house to a city were I work, the hotspot usually works pretty good. But it's when I'm going home that I am start having problems. In the city, there is probably around 50-100 wifi networks when I start the ride home. And that's when it usually is impossible to connect the hotspot to the laptop. However, when leaving the city and entering the highway, it is usually easier. I have these connection problems on both 5Ghz and 2.4Ghz and if it does connect, 2.4 is hideous, it disconnects all the time.
So the conclusion for me is that it is having a very hard time connecting when there are a lot of wifi networks around. However, It never seemed to be a major problem on Oreo, only on Pie.
baxtex said:
Hi and thank you for your post. It seems that windows had changed dns settings by its own to something invalid, so that is why it didn't work. However I am still having connection issues. Mainly I find it very difficult to connect my laptop (and other devices) to the hotspot of the Oneplus 6.
1) Done.
2) Done.
3) It was already set at 64 but I tried setting in to 64 again.
DUN is still 0 after reboot. I have also removed the wifi from my PC and changed name on the hotspot. Also tried both 2.4 and 5 Ghz. When the pc is connected the hotspot, I can ping google succesfully, so internet works but not DNS, all requests in my browser times out. I have also tried setting DNS to external providers in the phone (not sure if if affects the hotspot though). I looked at easy tether but root version was pretty expensive. I also googled XDA VPN Hotspot but I'm not sure which app you mean. Do you have the link?
Right now I'm just thinking of factory resetting the phone and installing the latest oxygen version (I'm still on 9.0.0.0).
Here is even more testing:
What I am experiencing is that there are grave problems trying to connect when in an area with a lot of wifi networks.
I live on the countryside and I thought I would try using hotspot for a couple of times. Thing is, at home, sharing hotspot from the phone to my laptop always works instantly, both on 5Ghz and 2.4Ghz. I might add that there are basically no wifi networks interfering where I live, except for my own. When I start my bus ride in the morning from my house to a city were I work, the hotspot usually works pretty good. But it's when I'm going home that I am start having problems. In the city, there is probably around 50-100 wifi networks when I start the ride home. And that's when it usually is impossible to connect the hotspot to the laptop. However, when leaving the city and entering the highway, it is usually easier. I have these connection problems on both 5Ghz and 2.4Ghz and if it does connect, 2.4 is hideous, it disconnects all the time.
So the conclusion for me is that it is having a very hard time connecting when there are a lot of wifi networks around. However, It never seemed to be a major problem on Oreo, only on Pie.
Click to expand...
Click to collapse
Seems more like WiFi / Computer related than phone. Did you try USB tethering? Is DNS get manually set in your computer by something else you installed?
MetroWestMA said:
Seems more like WiFi / Computer related than phone. Did you try USB tethering? Is DNS get manually set in your computer by something else you installed?
Click to expand...
Click to collapse
USB tethering works fine, dns as well. Its just the connection, it is very difficult to connect anything to the Oneplus 6 in wifi crowded areas.
Will this effect Bluetooth tethering too? Or is there another command for that? Dang built in hot spot get horrible speed after this setting is set, at least be on T-Mobile.
Hi guys,
I also face a strange issue, the connected devices to the hotspot it keeps disconnected after some time.. 1min, 5min, 15min...is random and annoying. Dose anyone face this issue to? Tried diferent fixes but nothing works, it remained to do a factory reset to see if the problem persist..
khrisstyan said:
Hi guys,
I also face a strange issue, the connected devices to the hotspot it keeps disconnected after some time.. 1min, 5min, 15min...is random and annoying. Dose anyone face this issue to? Tried diferent fixes but nothing works, it remained to do a factory reset to see if the problem persist..
Click to expand...
Click to collapse
Read this thread. Workaround in here.

Categories

Resources