Has anyone found a thoroughly clear TPU case yet? There are several on Amazon that describe themselves as clear but they have cloudy matte material on the back or odd designs that interrupt the smooth clear look. It took a while to find one for my original Moto X, but if anybody sees one could they please post?
Got to show off the ebony finish!
Thanks!
I would try Aliexpress, they seem to always have that type of stuff before anyone else.
Sent from my XT1097 Victara
I know this is an old one but I figured I'd bump it in case anybody found one.
Any luck?
I found a hard clear case that was a shell for the back on Amazon, not terrible.
tgerbracht said:
I found a hard clear case that was a shell for the back on Amazon, not terrible.
Click to expand...
Click to collapse
link?
Gioiabazar Crystal Clear Transparent Hard Back Case Cover for Moto X 2014 2nd Gen by Gioiabazaar http://www.amazon.com/dp/B00OX5RVDM/ref=cm_sw_r_udp_awd_lAAIub1M5M8B4
tgerbracht said:
I found a hard clear case that was a shell for the back on Amazon, not terrible.
Click to expand...
Click to collapse
se1000 said:
link?
Click to expand...
Click to collapse
tgerbracht said:
Gioiabazar Crystal Clear Transparent Hard Back Case Cover for Moto X 2014 2nd Gen by Gioiabazaar http://www.amazon.com/dp/B00OX5RVDM/ref=cm_sw_r_udp_awd_lAAIub1M5M8B4
Click to expand...
Click to collapse
All I see there is a pic of the phone. Do you receive a box of air?
Sent from my Moto X 2014 using Tapatalk
Yep.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Moto X 2014 using Tapatalk
Here it is.
tgerbracht said:
Here it is.
Click to expand...
Click to collapse
That looks like about like the same thing I've seen on AliExpress for like $1. I'm curious how much protection the hard clear cases would offer (and if they'd scratch the phone). What are your initial thoughts?
It's a hard case, it will scratch. Mine had a couple smudges on the inside that wouldn't buff out. It does have a recessed dimple which is a nice to touch and lets you enjoy the feel of it when you're holding it. I found that it was a little rough holding it on the bottom where the case ends and the phone began since it only covers the back half.
I'm kinda surprised that Cruzerlite doesn't make a mostly clear gloss TPU case.
Sent from my Moto X 2014 using Tapatalk
I'd still prefer a soft tpu clear. Fingers crossed.
tgerbracht said:
I'd still prefer a soft tpu clear. Fingers crossed.
Click to expand...
Click to collapse
Same here.
Sent from my Moto X 2014 using Tapatalk
Casemate has a 2 piece clear. Polycarbonate outer (hard) with flexible rubber/TPU bumper in inside. Usually $35 from AT&T, It's called the Naked Tough. My Ex has it, looks nice but not very grippy. Plus, I'd fear scratching if you lay it down often.
I myself have a TPU in semi-clear. Paid like $6 but like most, it's "frosted" on rear in center. Still let's some color through on back and completely on edges/front. Beware though, if you get one, male sure you see the hole on the back for the upper mic. Mine didn't have it and I had to make my own hole. Contacted the seller and they said they would get me a replacement one sent out. Still waiting on that.
---------- Post added at 08:48 AM ---------- Previous post was at 08:45 AM ----------
---------- Post added at 08:50 AM ---------- Previous post was at 08:48 AM ----------
http://pages.ebay.com/link/?nav=item.view&id=400811862085&alt=web
---------- Post added at 08:51 AM ---------- Previous post was at 08:50 AM ----------
The second link is for the one I have. Notice, the pic shows no hole at the top on the rear. I like it especially for $6. Flexible enough to get on, strong enough that it hangs on, clear enough that you know what I'm rocking on the back and grippy enough to feel better holding in hand.
dakleenupman said:
Casemate has a 2 piece clear. Polycarbonate outer (hard) with flexible rubber/TPU bumper in inside. Usually $35 from AT&T but found for $19 or so on Amazon IIRC. It's called the Naked Tough. My Ex has it, looks nice but not very grippy. Plus, I'd fear scratching if you lay it down often.
Motorola Moto X Case-mate Clear w/clear bumper Naked Tough case by Case-Mate http://www.amazon.com/dp/B00ERP3CWM/ref=cm_sw_r_udp_awd_9rVJub0BB7NTK
Click to expand...
Click to collapse
I thought that price was too good to be true...that's for the first gen Moto X.
Elsydeon said:
I thought that price was too good to be true...that's for the first gen Moto X.
Click to expand...
Click to collapse
You are correct. My apologies. I will correct post so as not to cause confusion.
Related
I really, really, really, want an official bumper. I check the google play store every day, several times per day, just in the off chance that bumpers will be available. In an effort to avoid smashing my Nexus 4 into millions of shards of glass, I purchased one of those S-cases floating around on ebay. I have to say this case is one of the most hideous things i've ever seen. It made my phone look like a cheap knockoff. In order to improve the aesthetics of said S-case, I decided to turn it into a bumper. I present you all my ghetto bumper. I'm starting to get really desperate, I'm tempted to pay outrageous ebay prices for a real one. (sorry this is mostly a rant)
hacksaw jim bumper
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My silly bumper and my november beard.
Ya that's ghetto alright!
Sent from my SGH-I747M using xda premium
LOL! I purchased an S-line case as a temporary fix until the official bumper (or anything similar) hits the market. I was thinking of doing the same thing and cutting out most of the back, but after seeing that it looks fugly! no offense obviously since my work would be just as bad. lol
I'm glad I'm not the only one who thought of doing this.
Sent from my Nexus 7 using xda app-developers app
agtitan said:
I'm glad I'm not the only one who thought of doing this.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Great minds think a like.
Where can I get one?
( ﾟヮﾟ )
haha wow. throw that thing away. be patient or pay the eBay prices. more bumpers will be on the way in the future, official or not
Sent from my Nexus 4 using xda premium
Haha, that's funny. I got a clear one and I kind of like it. I want to cut out the power button and volume controlled tho. I was hoping to see a china-china knock off bumper by now. I guess not......
tweaked said:
Haha, that's funny. I got a clear one and I kind of like it. I want to cut out the power button and volume controlled tho. I was hoping to see a china-china knock off bumper by now. I guess not......
Click to expand...
Click to collapse
I kept the volume rocker covers on and cut out the power button. It definitely works better without the power button cover.
Just get this case
it's has a premium feeling to it and is pretty solid on the quality. Plus, it protects more than the bumper and costs half as much.
UZ7 said:
Where can I get one?
( ﾟヮﾟ )
Click to expand...
Click to collapse
Send me a private message for details. I'm currently taking pre-orders. You may get it quicker than google's case.
I plan on doing the same with the X case, I'm going to use a dremel though so the cuts will be cleaner. Wont be able to post pics for weeks though because they are in China somewhere lol.
Order this one like I did... It's going to be a wait but it should be here by end of month.
Poetic Borderline Bumper Case:
http://www.amazon.com/gp/product/B00AG0D52O/ref=oh_details_o02_s00_i00
Does anyone know if wireless charging and NFC functions with these cases (not with just the bumpers of course)?
GoreTan said:
Just get this case
it's has a premium feeling to it and is pretty solid on the quality. Plus, it protects more than the bumper and costs half as much.
Click to expand...
Click to collapse
Those types of cases pop off the phone when you drop them. I tried to use them on several iphones to no avail. Bumpers for the win.
smirkis said:
haha wow. throw that thing away. be patient or pay the eBay prices. more bumpers will be on the way in the future, official or not
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I agree with this guy. Not trying to be mean but that case is terrible.
MUHAHAHAHAHA said:
Does anyone know if wireless charging and NFC functions with these cases (not with just the bumpers of course)?
Click to expand...
Click to collapse
I've seen people say the Qi charging still works with the TPU cases.
---------- Post added at 06:33 PM ---------- Previous post was at 06:32 PM ----------
Yeah it might look okay if you clean up the cuts.
I just got the same case today, should have my phone tomorrow.
Get the Diztronic TPU and they will be releasing a slim/shell case on the 10th
ketjr81 said:
I've seen people say the Qi charging still works with the TPU cases.
---------- Post added at 06:33 PM ---------- Previous post was at 06:32 PM ----------
Yeah it might look okay if you clean up the cuts.
I just got the same case today, should have my phone tomorrow.
Click to expand...
Click to collapse
A lighter might be able to clean the cuts.
Sent from my Nexus 7 using xda app-developers app
If anyone has one of those Ringke case that has the loose side could cut the back and sand it down. Probably would look pretty nice. Although probably little protection since it would be a slim bumper
Found this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.amazon.com/Motorola-Edit...lp_s_cp_2?ie=UTF8&refRID=0NVJ784KBC9PS2PX2QM2
Anyone bought from them before? Thoughts?
Thanks for the post. Just ordered it with expedited shipping. Should be here next week will post pictures if someone already hasn't.
I'd really like a Spigen Clear Back Hybrid like my son has. the back is hard but the sides are a rubbery hard plastic.
http://www.amazon.com/dp/B00OH4I2LY/ref=cm_sw_su_dp
but this will do untill i find something else better
Look at this one released on the 25th:
http://www.amazon.com/i-Blason-Scra...&ie=UTF8&qid=1442095528&sr=1-40&keywords=pure
jdfrye said:
Thanks for the post. Just ordered it with expedited shipping. Should be here next week will post pictures if someone already hasn't.
I'd really like a Spigen Clear Back Hybrid like my son has. the back is hard but the sides are a rubbery hard plastic.
http://www.amazon.com/dp/B00OH4I2LY/ref=cm_sw_su_dp
but this will do untill i find something else better
Look at this one released on the 25th:
http://www.amazon.com/i-Blason-Scra...&ie=UTF8&qid=1442095528&sr=1-40&keywords=pure
Click to expand...
Click to collapse
Something interesting that I found is that Supcase also has cases for sale on Amazon for the Pure even though there isn't anything about them on their site. Release date isn't till the 25th-30th however.
Have the case posted in op its crap
Sent from my XT1575 using Tapatalk
---------- Post added at 02:37 AM ---------- Previous post was at 02:32 AM ----------
It's a hard plastic 2 piece ****ty snapon case that is so slippery and rubbish I stick with the bumper..
Sent from my XT1575 using Tapatalk
StreetkillnHD said:
Have the case posted in op its crap
Sent from my XT1575 using Tapatalk
---------- Post added at 02:37 AM ---------- Previous post was at 02:32 AM ----------
It's a hard plastic 2 piece ****ty snapon case that is so slippery and rubbish I stick with the bumper..
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
I have it as well. I don't like it at all, feels cheap but then again it is cheap. I guess it will have to do until I find something quality that I like.
Same here.
Sent from my VK810 4G using Tapatalk
Alright, good to know. Glad we could all warn others haha
the warning didnt get to me fast enough. I have it coming.
I might use it anyway untill something better comes since I'm a painter and if i grab my bamboo with painted hands might not be so good
Ordered this case as well. A crappy case is better than no case on this beauty...
Thatwhy i went on and ordered it. Better than nothing. I wanted the dust to settle a little then pick out something i really like.
Sent from my VK810 4G using Tapatalk
finally got mine in the mail. it feels so much better than the included bumper. this will be my case till tomorrow when my incipio case comes
jdfrye said:
finally got mine in the mail. it feels so much better than the included bumper. this will be my case till tomorrow when my incipio case comes
Click to expand...
Click to collapse
Interesting...does it feel solid?
Locklear308 said:
Interesting...does it feel solid?
Click to expand...
Click to collapse
It feels solid but if you think about it, if it were to fall and hit on the corner then it might split apart and not bounce like a TPU case which would maybe damage the phone more likely.
But I like almost as well as the Incipio Octane case I have.
I like that you can feel the metal buttons on the side
This looks like the exact one offered by "Storm-Buy" on Amazon. I imagine it's from the same Chinese company. Either way I have this case on my phone and I personally like it.
Now it's not perfect but it does what I really need it to do. I was looking for a clear case that would show off the back, while protecting my phone from basic scratches and bumps, and not adding too much bulk. I don't think it's going to be as good as other cases for drops and falls but works fine for minor protection.
You can see what looks like leftover marks, probably from the manufacturing process. Not really super noticeable but you can see them. Since it is a 2-piece snap-on case there is a bit of flex by the volume button and it is a bit slippery. But the case is solid and snug on the phone. It also provides a lip on top so the screen is protected when face down on a flat surface. It's also not likely to come apart. I actually have a hard time taking it off that I feel I'm going to break it when I try. For $8 I'm not going to complain.
If you are a bit rougher on you phones, then I recommend a different one but for basic scratches this one isn't terrible.
I've been using this case for about a week now and I think it is fine. It will definitely protect the wood back (ebony) from scratches., and it was inexpensive -- I doubt it will offer much protection from a drop. I'll move on when I see another clear case that is deemed to be tough and low profile.
The ebony wood back is very very nice - very glad I selected that option.
Mine shipped and never made it. They gave me a quick refund. I was impressed they refunded my money so fast.
Sent from my VK810 4G using Tapatalk
This thing is literally the best, tightest fitting, TPU case out there for this phone. I ordered two and it's perfect. Fits perfectly, perfect cutouts, buttons have nice feeback...and it's like $4.
http://www.ebay.com/itm/26207319727...49&var=560851613091&ssPageName=STRK:MEBIDX:IT
looks good but apparently seller is away... and with how ridiculously long it's taking me just to get a damn case for this phone that is just a simple TPU, i'm not gonna bother. I've already gotten 1 case that turned out to be too small, another that kept giving me the run around about ship times which I had to cancel, just ordered one last week they said would be here today but turns out it didn't even ship until today, and another i ordered Saturday that won't be here until the 20th! why the hell is it taking so long to get a damn basic case for this phone? I'm almost 3 weeks into having it and still no case.
Sent from my Moto X Pure Edition
Imak Slim Soft Clear Rubber Cover Case
http://www.ebay.com/itm/252118354629?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Estimated delivery Oct 29, 2015 - Nov 19, 2015
Man I hate all covers for this phone I wish spigen made a bumper case because I have had a great experience with those in other phones. I think I'll buy one of the posted above as they look nice!
lmichele said:
http://www.ebay.com/itm/252118354629?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Estimated delivery Oct 29, 2015 - Nov 19, 2015
Click to expand...
Click to collapse
I'm curious to see how that one looks in real life.
just received mine this evening loving it so far, really grippy has ridges on the side for added grip
has a nice wave design that will show the back design
http://www.amazon.com/gp/product/B011EPANG0?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not sure if it's the same one but I've got this one and it seems pretty nice. I haven't used it myself because I got it for my wife's phone (if it ever gets here :/).
---------- Post added at 01:18 PM ---------- Previous post was at 01:15 PM ----------
wh4s4ngo said:
just received mine this evening loving it so far, really grippy has ridges on the side for added grip
has a nice wave design that will show the back design
http://www.amazon.com/gp/product/B011EPANG0?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Click to expand...
Click to collapse
I've go the plain black version of this case on the way. I'm not really a case-guy but this looked like it didn't add much to the width or thickness of the phone so I may be able to deal with it.
I finally found a case that's nice for this phone. you can get clear or smoked. I recommend it. I got smoked.
http://m.ebay.com/itm/381431952096
Sent from my Moto X Pure Edition
jayochs said:
I finally found a case that's nice for this phone. you can get clear or smoked. I recommend it. I got smoked.
http://m.ebay.com/itm/381431952096
Sent from my Moto X Pure Edition
Click to expand...
Click to collapse
Looks pretty nice -- mind sharing some photos of your phone with it on? Also, how is the real-life bulk -- very noticeable?
Yes, some pics would be nice.
jayochs said:
I finally found a case that's nice for this phone. you can get clear or smoked. I recommend it. I got smoked.
http://m.ebay.com/itm/381431952096
Sent from my Moto X Pure Edition
Click to expand...
Click to collapse
Got the same case, in fact, got clear and smoked. I made a video showing them on and off the phone. Minimal bulk added and a nice tight fit.
Check it out:
https://www.youtube.com/watch?v=DhFafjn61wM
I bought the one in the OP. It's GREAT! I have tried 2 others and this is by far the best one. Thank you!
I have 4 of the casemate naked toughs. No idea why I have that many...
redrider54 said:
I have 4 of the casemate naked toughs. No idea why I have that many...
Click to expand...
Click to collapse
Where'd you get them cheap enough to buy that many? Lol.
Sent from my XT1575 using Tapatalk
lol... I'm going to get rid of them I don't need or like any of these yet.
I bought both the graphite Nexus 6P case with the microfiber textured back, as well as the adopted slim case.
Pictures are gonna be difficult for the moment, just wanted to make some quick observations.
They both fit super snug and feel as if they are the exact same case, but with different textured backs.
Button pressing isn't difficult at all on either, like I had heard...
The microfiber backed Nexus case is definitely more unique and nicer looking, but it doesn't provide the grip that I thought it would on the back. The material on the back feels like felt, and it seems like it will get messed up over time, but rubbing it back and forth didn't affect it. The lack of grip really saddened me because it looks so cool. It's not slippery by any means, just doesn't give you a confident feeling.
The Adopted slim case has more textured sides, while the Google case is smooth. This is strange because they are the exact same button layout.
The back material on the Adopted reminds me of the matte Ringke Slim cases that I love so much. It definitely provides more grip on the back of the phone, and a cleaner look overall.
Ask your questions, pictures below.
IMGUR GALLERY LINK HERE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for the pics!
I bought the adopted slim just to have something until more cases come out but I like it so much on my phone I think it'll be all I need.
Sent from my Nexus 6P using Tapatalk
Thanks. I got the Google case in carbon like above. No phone or case yet to hold. Thanks for the pics though.
Sent from my Nexus 6 using Tapatalk
I got the adopted case as well. I don't think i will be getting any other case. Fits like a glove. However, it is a bit rough on the screen protectors that go all the way to the edges
Sent from my Nexus 6P using Tapatalk
---------- Post added at 08:42 AM ---------- Previous post was at 08:42 AM ----------
Sent from my Nexus 6P using Tapatalk
dsmitty166 said:
I got the adopted case as well. I don't think i will be getting any other case. Fits like a glove. However, it is a bit rough on the screen protectors that go all the way to the edges
Sent from my Nexus 6P using Tapatalk
---------- Post added at 08:42 AM ---------- Previous post was at 08:42 AM ----------
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
That's aluminum, right? Can you take a picture of the front, please. Also does this case add much thickness to any of the dimensions?
Edit: NM, found some pics in another thread.
ikon8 said:
That's aluminum, right? Can you take a picture of the front, please. Also does this case add much thickness to any of the dimensions?
Edit: NM, found some pics in another thread.
Click to expand...
Click to collapse
The case is really tight. Fits like a glove. I'm content not even trying any other cases.
Don't mind the awful screen protector, waiting for my TGSP to come.
Sent from my Nexus 6P using Tapatalk
Looks great!
Sent from my SM-N900T using Tapatalk
Just ordered the same Frost clear adopted case for my 64gb Aluminum 6P. Thanks to dsmitty166 for review and pics!
dsmitty166 said:
The case is really tight. Fits like a glove. I'm content not even trying any other cases.
Don't mind the awful screen protector, waiting for my TGSP to come.
View attachment 3526314
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
How are the buttons? Do they feel mushy?
ctbear said:
How are the buttons? Do they feel mushy?
Click to expand...
Click to collapse
After trying a different case. The buttons do feel mushy, especially the power button. The Adopted has been put away..
I've been looking to get the Adopted case but it's been sold out since launch everytime I visit.
https://store.google.com/product/adopted_case_n6p
I'm perfectly happy with my Adopted case. Just a touch of texture on the edges, fits snug.
I was a little bit afraid that the microfiber case would kind of stick in my pocket. Any issues there?
Does the case allow you to obtain a screenshot with the case on? I own the microfiber-backed case, and the fitment of the case is poor, and the case needs to be removed to take a shot.
2thvet said:
Does the case allow you to obtain a screenshot with the case on? I own the microfiber-backed case, and the fitment of the case is poor, and the case needs to be removed to take a shot.
Click to expand...
Click to collapse
I don't do it often, but I've had no trouble getting screenshots with the Adapted case.
brubkaer said:
I don't do it often, but I've had no trouble getting screenshots with the Adapted case.
Click to expand...
Click to collapse
Same here, taken some with Adopted and no issues so far.
Anyone have an issue with this case scratching the power button/volume rockers when taking it off? I've heard of this in the Android Central forums.
Sent from my Nexus 5X using Tapatalk
Picked up a fitbag from Amazon because I'm trying the caseless approach with the 6P. This one came from the amazon store, they ship from Germany so delivery was about 2.5 weeks from purchase date.
They've got tons of colors and materials to chose from, all of which have a microfiber lining on the inside. First impressions are very positive its stiched together very nicely and the Rave brown is super soft and a dark khaki like color.
If anyone's looking for a good pouch I recommend you check fitbag out.
http://www.amazon.com/gp/product/B015YGEB72?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Pics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6P using Tapatalk
Looks really good. Slides in and out of the sleeve pretty easily I assume?
tonystarks260 said:
Picked up a fitbag from Amazon because I'm trying the caseless approach with the 6P. This one came from the amazon store, they ship from Germany so delivery was about 2.5 weeks from purchase date.
They've got tons of colors and materials to chose from, all of which have a microfiber lining on the inside. First impressions are very positive its stiched together very nicely and the Rave brown is super soft and a dark khaki like color.
If anyone's looking for a good pouch I recommend you check fitbag out.
http://www.amazon.com/gp/product/B015YGEB72?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Pics
View attachment 3527703
View attachment 3527704
View attachment 3527708
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I don't get it. How do you use the phone? You can't see the screen.
---------- Post added at 08:00 PM ---------- Previous post was at 07:57 PM ----------
tonystarks260 said:
Picked up a fitbag from Amazon because I'm trying the caseless approach with the 6P. This one came from the amazon store, they ship from Germany so delivery was about 2.5 weeks from purchase date.
They've got tons of colors and materials to chose from, all of which have a microfiber lining on the inside. First impressions are very positive its stiched together very nicely and the Rave brown is super soft and a dark khaki like color.
If anyone's looking for a good pouch I recommend you check fitbag out.
http://www.amazon.com/gp/product/B015YGEB72?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Pics
View attachment 3527703
View attachment 3527704
View attachment 3527708
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Thanks for posting this I ordered the brown leather fitbag from Amazon. Looks good. I'll have this and a clear case for my phone , when I get it. Lol
Sent from my LG-H815 using Tapatalk
shadymouse said:
Looks really good. Slides in and out of the sleeve pretty easily I assume?
Click to expand...
Click to collapse
Yea, it fits snug to the body, but its really easy to slide in an out of the bag. Just push up from the bottom and it'll pop up far enough to take it out
Elnrik said:
I don't get it. How do you use the phone? You can't see the screen.
---------- Post added at 08:00 PM ---------- Previous post was at 07:57 PM ----------
Click to expand...
Click to collapse
It's not meant to be used in the bag, you take it out to use it. For me it works well with the setup because I'm not a case fan, but I like to have some pocket protection. Paired with the G watch R i can still see everything going on with the phone. Some people like the pouch because you get the full body protection perks when not in use, and you get the naked phone when in use
tonystarks260 said:
Yea, it fits snug to the body, but its really easy to slide in an out of the bag. Just push up from the bottom and it'll pop up far enough to take it out
It's not meant to be used in the bag, you take it out to use it. For me it works well with the setup because I'm not a case fan, but I like to have some pocket protection. Paired with the G watch R i can still see everything going on with the phone. Some people like the pouch because you get the full body protection perks when not in use, and you get the naked phone when in use
Click to expand...
Click to collapse
I ordered this fit bag as well, for the same reason as you. One question, do you carry it a lot in your front pocket of your pants? I'm planning to do so but the stories about bended phones worries me. Right now I have a hard case which adds some sturdiness to it.
J_Dutch said:
I ordered this fit bag as well, for the same reason as you. One question, do you carry it a lot in your front pocket of your pants? I'm planning to do so but the stories about bended phones worries me. Right now I have a hard case which adds some sturdiness to it.
Click to expand...
Click to collapse
Yup I keep it in the front left pocket when carrying it. After carrying a nexus 6 last year though I'm used to taking the phone out when I sit down. So far I haven't had any issue with the 6P
Sent from my Nexus 6P using Tapatalk
Thanks for your review and pics... I'm waiting for my Napa White fitBAG to be delivered.