I followed this guide, and luckily got through it alive.
http://forum.xda-developers.com/showthread.php?p=42080337#post42080337
Downloaded Root Dump (dump_20140520Rooted) from here :
http://forum.xda-developers.com/showthread.php?t=2216390&page=114
In clockwork I go to Installation from zip and locate the zip file, getting installation aborted. I have tried to wipe cache .
What am i missing in the process?
Thanks
Related
i rooted using exploit v 2.3.0 with superuser.apk and it worked on my epic since i see superuser. the problem i have is that when i download rom manager and install clockworkmod 2.5.1.0 from rom manager for my epic. then i proceed to backup current rom, i give it a name and then reboots my phone to factory recovery and this is what i see:
android system recovery <2e>
samsung recovery utils
-for BML-
reboot system now
apply sdcard:update.zip
wipe data cache
wipe cache partition
install from package...
finding update package
opening update package
verifying update package
E:failed to verify whole file signature
E:signature verification failed
insstallation aborted
can anyone help me backup so I can download new roms afterwards.
Clockwork didn't install bro. Try using the run last.bat, that one works when not rooted, I had issues when already rooted sometimes. You could also try selecting apply update.zip, I think flashing recovery in rom manager puts an update.zip on your sd which opens cockwork recovery when applied from stock rec
Sent from my SPH-D700 using Tapatalk
where can I find the run.bat file? I have looked in the clockworkmod folder on the sdcard, not there tho.
selecting apply update.zip also does the exact same thing
android system recovery <2e>
samsung recovery utils
-for BML-
reboot system now
apply sdcard:update.zip
wipe data cache
wipe cache partition
install from package...
finding update package
opening update package
verifying update package
E:failed to verify whole file signature
E:signature verification failed
installation aborted
Hi,
I have a rooted HTC Evo 4G with Clockwork Recovery installed, I tried to install the Energy ROM following the steps from http://forum.xda-developers.com/showthread.php?t=1290300
I've followed the steps carefully and the installation fails...
In the instructions post says: use the download link in post #3, I've downloaded the file twice and verified the MD5 with MD5 Checker and are different...
The error message when installig says:
Finding update package...
Opening update package...
E:Can't open /sdcard/Energy_11.23.2011.EVO4G.zip (bad)
Installation aborted.
Any help?
Thanks in advance...
copy the rom again to your sd card and if it says the same thing try redownloading
*** ( solved ) ***
Thanks for answering...
After a lot of searching I have solved the problem, formatting the sd card in fat32 format on my pc, copying again the zip rom and when I tried again to install it and no problem
Thanks!
(I've downloaded the lastest version of the ROM Energy 11.23.2011)
*** ( SOLVED ) ***
Hello, my tablet is TF300TG WW 9.4.4.40, unlocked bootLoader with custom recovery CWM
What I did is I went to
1-Asus support downloaded the appropriate upgrade which is "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP"
2-copied the zip file as it is "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP" and also copied whats in it which is "TW_epad-user-10.4.3.7.zip"
3.got the exclamation mark which is telling me there is an update
4.restart
5.It went automatically to the custom recovery CWM
6.I assumed I need to factory reset/and clear dalvik
7.then install from sdcard
8.tried "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP" and failed immediatly
"script aborted (no error message)E:Error in /sdcard/WW_epad-user-10.4.3.7.zip (status 7)
Installation aborted
Any suggestions please?
The way I updated mine was real simple: (Also have the TF300TG)
1. copy correct zip file from Asus to microSD card.. (make sure its the only file on the card)
2. Use the tablet microSD slot not the docking station one.
3. Power off the Tablet and reboot
Mine rebooted and ran the update no issues at all.. Hope that helps
I did this before unlocking the bootloader etc
mydear2020 said:
Hello, my tablet is TF300TG WW 9.4.4.40, unlocked bootLoader with custom recovery CWM
What I did is I went to
1-Asus support downloaded the appropriate upgrade which is "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP"
2-copied the zip file as it is "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP" and also copied whats in it which is "TW_epad-user-10.4.3.7.zip"
3.got the exclamation mark which is telling me there is an update
4.restart
5.It went automatically to the custom recovery CWM
6.I assumed I need to factory reset/and clear dalvik
7.then install from sdcard
8.tried "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP" and failed immediatly
"script aborted (no error message)E:Error in /sdcard/WW_epad-user-10.4.3.7.zip (status 7)
Installation aborted
Any suggestions please?
Click to expand...
Click to collapse
mydear2020 said:
Hello, my tablet is TF300TG WW 9.4.4.40, unlocked bootLoader with custom recovery CWM
What I did is I went to
1-Asus support downloaded the appropriate upgrade which is "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP"
2-copied the zip file as it is "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP" and also copied whats in it which is "TW_epad-user-10.4.3.7.zip"
3.got the exclamation mark which is telling me there is an update
4.restart
5.It went automatically to the custom recovery CWM
6.I assumed I need to factory reset/and clear dalvik
7.then install from sdcard
8.tried "WW_epaduser_10_4_3_7_UpdateLauncher.ZIP" and failed immediatly
"script aborted (no error message)E:Error in /sdcard/WW_epad-user-10.4.3.7.zip (status 7)
Installation aborted
Any suggestions please?
Click to expand...
Click to collapse
For you tablet to update as you first tried stock recovery needs to be in place. Not cwm or twrp and the file would be TW_epad-user-10.4.3.7.zip.
You should be able to flash TW_epad-user-10.4.3.7.zip with cwm to update ( install zip ). After this completes you will have stock recovery in place not cwm.
Good luck!
As we all know LOLLIPOP[5.0] is released for nexus 5 now....
So when installing some roms you will get installation aborted error.....
In this thread I will provide a guide to solve this error....
Why You Are Getting This Error
If you update your nexus 5 via OTA then your bootloader also gets updated..And in some updater scripts there is bootloader check to verify your bootloader version...If it miss matches then you get INSTALLATION ABORTED error
Requirements:
1. 7zip OR winzip
2.Notepad ++
3.Brain
Steps:
1.Take the rom which you want to install and extract it.
2.Now navigate to META-INF\com\google\android and open updater script with Notepad ++
3.Search for 'assert(getprop("ro.bootloader") == "HHZ11k")'
4.Now change HHZ11k to HHZ12d.
5.Save it and exit.
6.Now zip your rom again and flash it..
It should not give installation aborted error now........
HAPPY FLASHING
Press Thanks If It Helped You....
Well done guide for the noobs!
TheLastSidekick said:
Well done guide for the noobs!
Click to expand...
Click to collapse
yeah..
Hi,
I tried to install ViPER4Android_FX_v2330 on stock via philz cwm.
Every downloaded file give me 'signature verification error' and zip installation aborts.
What em i doing wrong ?
Just install the apk