[Q] Samsung Trend S7560 Boot loop - Samsung Galaxy Ace Plus S7500

Hello there,
I'm posting here because I didn't find a Samsung Trend S7560 topic.
I broke my screen and ordered a new one a changed it.
Since I changed it the phone turns on, display 'Samsung Trend S7560' on screen and reboot.
I can access the Donwload mode with 'Vol down + Home + Power' Then I tried to install a recovery and I manage to enter recovery.
But when I go to 'mount and storage' I can mount no sdcard neither emmc.
I tried to push back with Odin a stock firmware from Sammobile but I'm steel stucked with the same bootloop.
Any help ?

Take it to the warranty or something.

kakik said:
Hello there,
I'm posting here because I didn't find a Samsung Trend S7560 topic.
I broke my screen and ordered a new one a changed it.
Since I changed it the phone turns on, display 'Samsung Trend S7560' on screen and reboot.
I can access the Donwload mode with 'Vol down + Home + Power' Then I tried to install a recovery and I manage to enter recovery.
But when I go to 'mount and storage' I can mount no sdcard neither emmc.
I tried to push back with Odin a stock firmware from Sammobile but I'm steel stucked with the same bootloop.
Any help ?
Click to expand...
Click to collapse
Hi, you posted in the wrong section. You have to post in the Samsung Trend's section
Inviato dal mio GT-S7500 con Tapatalk 2

Related

Galaxy S I9000 2.3.3 recovery mode issue.

Hi there. i flashed my SGS to the new 2.3.3 using Odin my kernel is DamianGTO beta 7 the problem is that i can get into recovery mode but i cant see the menu. instead i see the galaxy logo. i know that im in recovery mode because when i click the home button the phone reboots and start normally but when i go down with the volume buttons and click. the phone will not respond cause i clicked on some other option than the reboot. so what can i do in that case ?
and sorry for my bad english.
No one had this problem before? Im out of clues.
I have the same problem, so I'm too stucked now because CWM cannot boot into recovery mode too (i can only see the Galaxy S GT-I9000 SAMSUNG logo ... it reboot by pressing home buttom, so my guess is the same as you, the recovery mode is there but you cannot see the menu... )

Unable to boot GT-P6200 in recovery mode

Hi
I cannot get my Samsung Galaxy Tab 7.0 Plus (GT-P6200) to boot in recovery mode.
I tried the following:
1) Switch off the Tab.
2) Press the Power + Volume Up buttons simultaneously until I see the "Samsung Galaxy Tab 7.0 Plus" screen, then release the Power button and keep pressing the Volume Up button. The tab then get's stuck on the Samsung screen, even if I release the Volume Up button. It stays on this screen indefinitely, only option is to reboot by keeping the power button pressed for 5 seconds.
Any help will be appreciated.
Thanks!
same issue
I am having the same issue as well. My tab gets stuck on the "Samsung Galaxy Tab 7.0 Plus" screen and does not move on from that. When i try to boot in recovery mode the screen is just black and slightly illuminated. Please help
Ces123 said:
Hi
I cannot get my Samsung Galaxy Tab 7.0 Plus (GT-P6200) to boot in recovery mode.
I tried the following:
1) Switch off the Tab.
2) Press the Power + Volume Up buttons simultaneously until I see the "Samsung Galaxy Tab 7.0 Plus" screen, then release the Power button and keep pressing the Volume Up button. The tab then get's stuck on the Samsung screen, even if I release the Volume Up button. It stays on this screen indefinitely, only option is to reboot by keeping the power button pressed for 5 seconds.
Any help will be appreciated.
Thanks!
Click to expand...
Click to collapse
Same problem
any help ???
On which verison thar ur on???? have u tried to wiping data in stock recovery
??
same problem I'm having with my Samsung Gt-p6200, it just boot-loops to the "samsung galaxy tab 7.0" boot loading screen and hangs.. these happened after i flashed my firmware from stock honeycomb to jellybean(the austria firmware, i think that's been posted in this forum).
here's what happened before the problem:
-I flash the stock honeycomb firmware with the jellybean one that i found here..
-after i flashed using ODIN, the new firmware works great, i was even informed that i have free 50GB worth of dropbox space,
the file was named P6200XXMC3_P6200OXAMC3_ATO
- I have used it for a day, until the battery drains and i have to charge, but when i opened it again, it already does this "boot loop" problem
- i have tried flashing CWM with ODIN(as i've read here somewhere that it might help) and do that wipe cache and factory reset thing but that didnt help solved the problem.
hope anyone could help me, im also thinking flashing it back to it's original stock firmware but I dont have a backup of that and I dont know where to get one, I've been searching the net for two days for that stock rom but all i found are the new jellybean ones and some old ones but is uploaded to hotfile which is now deleted or locked.
I hope you guys could help me out and thanks in advance!
try flashing a new , latest firmware on odin
just try it.
ovox0 said:
I am having the same issue as well. My tab gets stuck on the "Samsung Galaxy Tab 7.0 Plus" screen and does not move on from that. When i try to boot in recovery mode the screen is just black and slightly illuminated. Please help
Click to expand...
Click to collapse
Hello guys! Im also having this same issue.
*Using the same firmware that was posted here in xda because i was having trouble downloading those official jellybean firmwares
*The battery got drained
then if i charge it, it will remain in a "blank slightly illuminated screen"
* after a few munutes, the tab gets really warm.
*but if i dont charge it, it will get drained again because it keeps on turning on itself back to this time to the "galaxy tab plus screen"
I cant access recovery mode.
I can access odin mode and can flash successfully with cwm or the same firmware back but the problem still persist.
I havent tried other firmwares though.
4 days passed already and i cant figure this out
Please help
So I had this happen to me yesterday, where it rebooted randomly on me, only to freeze on the Galaxy Tab 7.0 Plus screen. I had custom recovery (TWRP) don't know if that matters, but I was able to access it by holding Power+UpVol but keep it held. It would freeze on the same spot but since I was still holding the keys it reboots a second time and this time it would go into recovery.
I then wipes cache and dalvik, no go. Sadly did a full wipe. Still no going past the tab plus text. So I flash MF1 official 4.1.2 firmware (I was previously on 4.1.2 UK official) still no go. Put in latest 2.8 TWRP and booted into it still with some trouble as I mentioned above. Did another wipe and it then hung on blank screen or so I thought. Took a long time to boot and after a long time, and the Android is upgrading message, by some weird chance I was on the MF1 official rom but all my apps settings everything was saved.
Working 100% now and I still don't really know what the hell happened. But if this helps anyone then all the better!
My samsung p6200 is woking almost fine but i am not able to go into the download mode when i press volume down button and power the screen is at samsung logo it stays for a while and then it restarts from there,its the stock rom that's messd up i belive any help how to go into downlod mose other way would b apriciated

Brick note 10.1 no CWM or Odin

Hi guys, today I was trying to install the new Android Revolution HD v8 and the f***** aroma fails....
So, my tab is stuck on a bootloop on samsung logo, the fact is that if I press vol + or - nothing appear...neither CWM recovery, neither dowload mode. It just reboot continually when I press the power button.
My pc makes a sound when I plug it into the usb port, but I have no idea what I have to do...someone can help me?
Thanks
eddy2302 said:
Hi guys, today I was trying to install the new Android Revolution HD v8 and the f***** aroma fails....
So, my tab is stuck on a bootloop on samsung logo, the fact is that if I press vol + or - nothing appear...neither CWM recovery, neither dowload mode. It just reboot continually when I press the power button.
My pc makes a sound when I plug it into the usb port, but I have no idea what I have to do...someone can help me?
Thanks
Click to expand...
Click to collapse
Try turning it off by long pressing the power button untill the screen goes off .... then follow the steps to open CWM ... press the power and volume up until Samsung Galaxy Note 10.1 logo appears then stop pressing the power and keep pressing vol up and if it fails try with another turn off ... because trying to open CWM when the samsung logo is there wont work
Try to install again but if it fails again I'd try to re-download the rom... Hope you have an sd card reader cos the note WON'T be recognised by the PC....
You could also try to do a factory reset, format system, data and sd card, remove your external card before doing this so you don't accidentally loose everything there...
ok guys, fortunatly my note woke up and decided to enter in download mode...i flash the phil touch recovery and upgraded to the v8!
Many thanks to @wolvie80 who helped me :laugh:
Cheers and thanks to the other guys who wrote there

[Completed] [Q] Samsung S2 doesnt work after SuperSu update

Long story short, day after rooting, SuperSu suggested to update the program. It was late at night and I clicked one of the options which was TWRP/CWMR but for HTC devices . I agreed and it rebooted the device. Now I am stuck in booting page where there is an exclamation mark with product name.
Volume UP + HOME + POWER dont get me nowhere. I also tried to go ODIN mode (Volume DOWN + HOME + POWER) but no help.
Only thing it does is after 8 seconds of power button, it gives me black screen and goes back to boot display.
Took out my and put back in my battery, later external card and SIM but always stuck at booting.
When chargin battery, it doesnt even show the visual of the battery charging(green area) but only buffering ring on battery icon.
I think the whole firmware is bad, but how is it possible to reset everything ?
I hope it isnt bricked.
Hi,
First, we need your exact model number to guide you to help. There are several S2 models.
Also, did you have twrp or CWM installed already? It sounds like SU tried to boot to them but you had stock recovery? Or am I wrong?
How did you root originally?
And yes, you need to get into download mode, you likely need to flash stock with Odin again. Without download mode or even recovery mode... You are stuck.
At the moment I am trying to get my hands on JIG USB which enables me to go Download mode. and then flash ROM from ODIN.
The exact model is S2 i9100.
Hopefully it works for you! In the future then, all questions and issues about your device would go here,
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting
Good luck!

I'm stuck with booloop.

Hi
I'm new to this forum.recently i tried to flash my samsung s duos phone with a twrp recovery mode and after that my phone isn't boot.its stuck in samsung logo.i searched every website and they all say press the power+home+up button.
But when I press that buttons nothing happens.so i thing it's booloop.some one help me please .Thanks..

Categories

Resources