Unable to boot GT-P6200 in recovery mode - Samsung Galaxy Tab Plus

Hi
I cannot get my Samsung Galaxy Tab 7.0 Plus (GT-P6200) to boot in recovery mode.
I tried the following:
1) Switch off the Tab.
2) Press the Power + Volume Up buttons simultaneously until I see the "Samsung Galaxy Tab 7.0 Plus" screen, then release the Power button and keep pressing the Volume Up button. The tab then get's stuck on the Samsung screen, even if I release the Volume Up button. It stays on this screen indefinitely, only option is to reboot by keeping the power button pressed for 5 seconds.
Any help will be appreciated.
Thanks!

same issue
I am having the same issue as well. My tab gets stuck on the "Samsung Galaxy Tab 7.0 Plus" screen and does not move on from that. When i try to boot in recovery mode the screen is just black and slightly illuminated. Please help
Ces123 said:
Hi
I cannot get my Samsung Galaxy Tab 7.0 Plus (GT-P6200) to boot in recovery mode.
I tried the following:
1) Switch off the Tab.
2) Press the Power + Volume Up buttons simultaneously until I see the "Samsung Galaxy Tab 7.0 Plus" screen, then release the Power button and keep pressing the Volume Up button. The tab then get's stuck on the Samsung screen, even if I release the Volume Up button. It stays on this screen indefinitely, only option is to reboot by keeping the power button pressed for 5 seconds.
Any help will be appreciated.
Thanks!
Click to expand...
Click to collapse

Same problem
any help ???

On which verison thar ur on???? have u tried to wiping data in stock recovery
??

same problem I'm having with my Samsung Gt-p6200, it just boot-loops to the "samsung galaxy tab 7.0" boot loading screen and hangs.. these happened after i flashed my firmware from stock honeycomb to jellybean(the austria firmware, i think that's been posted in this forum).
here's what happened before the problem:
-I flash the stock honeycomb firmware with the jellybean one that i found here..
-after i flashed using ODIN, the new firmware works great, i was even informed that i have free 50GB worth of dropbox space,
the file was named P6200XXMC3_P6200OXAMC3_ATO
- I have used it for a day, until the battery drains and i have to charge, but when i opened it again, it already does this "boot loop" problem
- i have tried flashing CWM with ODIN(as i've read here somewhere that it might help) and do that wipe cache and factory reset thing but that didnt help solved the problem.
hope anyone could help me, im also thinking flashing it back to it's original stock firmware but I dont have a backup of that and I dont know where to get one, I've been searching the net for two days for that stock rom but all i found are the new jellybean ones and some old ones but is uploaded to hotfile which is now deleted or locked.
I hope you guys could help me out and thanks in advance!

try flashing a new , latest firmware on odin
just try it.

ovox0 said:
I am having the same issue as well. My tab gets stuck on the "Samsung Galaxy Tab 7.0 Plus" screen and does not move on from that. When i try to boot in recovery mode the screen is just black and slightly illuminated. Please help
Click to expand...
Click to collapse
Hello guys! Im also having this same issue.
*Using the same firmware that was posted here in xda because i was having trouble downloading those official jellybean firmwares
*The battery got drained
then if i charge it, it will remain in a "blank slightly illuminated screen"
* after a few munutes, the tab gets really warm.
*but if i dont charge it, it will get drained again because it keeps on turning on itself back to this time to the "galaxy tab plus screen"
I cant access recovery mode.
I can access odin mode and can flash successfully with cwm or the same firmware back but the problem still persist.
I havent tried other firmwares though.
4 days passed already and i cant figure this out
Please help

So I had this happen to me yesterday, where it rebooted randomly on me, only to freeze on the Galaxy Tab 7.0 Plus screen. I had custom recovery (TWRP) don't know if that matters, but I was able to access it by holding Power+UpVol but keep it held. It would freeze on the same spot but since I was still holding the keys it reboots a second time and this time it would go into recovery.
I then wipes cache and dalvik, no go. Sadly did a full wipe. Still no going past the tab plus text. So I flash MF1 official 4.1.2 firmware (I was previously on 4.1.2 UK official) still no go. Put in latest 2.8 TWRP and booted into it still with some trouble as I mentioned above. Did another wipe and it then hung on blank screen or so I thought. Took a long time to boot and after a long time, and the Android is upgrading message, by some weird chance I was on the MF1 official rom but all my apps settings everything was saved.
Working 100% now and I still don't really know what the hell happened. But if this helps anyone then all the better!

My samsung p6200 is woking almost fine but i am not able to go into the download mode when i press volume down button and power the screen is at samsung logo it stays for a while and then it restarts from there,its the stock rom that's messd up i belive any help how to go into downlod mose other way would b apriciated

Related

[Q] Galaxy s3 mini I8190N wont boot up

My daughters s3 mini has stopped working.
When you hold down the power button it gives a tiny vibration and the samsung logo comes on the screen, after that it goes black and then goes through the same process again (small vibration, s3 logo and model, then clack again)...
It seems to just loop on this over and over again...
I cannot get into the boot menu but can get into the download menu so have followed instructions and rooted it in odin... however, although that was successful) it still wont boot.
I am thinking there is an issue with the boot sequesnce?
I would love if someone has any other suggestions?
Thank you.
Seems like you got a bootloop..
Try flashing the official firmware again using ODIN.
All the firmwares van be found here : http://www.sammobile.com/firmwares/
Sent from my Nexus 4 using xda-developers app
lydanial said:
My daughters s3 mini has stopped working.
When you hold down the power button it gives a tiny vibration and the samsung logo comes on the screen, after that it goes black and then goes through the same process again (small vibration, s3 logo and model, then clack again)...
It seems to just loop on this over and over again...
I cannot get into the boot menu but can get into the download menu so have followed instructions and rooted it in odin... however, although that was successful) it still wont boot.
I am thinking there is an issue with the boot sequesnce?
I would love if someone has any other suggestions?
Thank you.
Click to expand...
Click to collapse
Quick thing to try. When you hold down the vol down to go into download mode and it asks if you're sure you want to go into download mode, choose CANCEL instead and see if it boots. That sometimes knocks it out of the loop.
Bill

[Completed] [Q] Samsung S2 doesnt work after SuperSu update

Long story short, day after rooting, SuperSu suggested to update the program. It was late at night and I clicked one of the options which was TWRP/CWMR but for HTC devices . I agreed and it rebooted the device. Now I am stuck in booting page where there is an exclamation mark with product name.
Volume UP + HOME + POWER dont get me nowhere. I also tried to go ODIN mode (Volume DOWN + HOME + POWER) but no help.
Only thing it does is after 8 seconds of power button, it gives me black screen and goes back to boot display.
Took out my and put back in my battery, later external card and SIM but always stuck at booting.
When chargin battery, it doesnt even show the visual of the battery charging(green area) but only buffering ring on battery icon.
I think the whole firmware is bad, but how is it possible to reset everything ?
I hope it isnt bricked.
Hi,
First, we need your exact model number to guide you to help. There are several S2 models.
Also, did you have twrp or CWM installed already? It sounds like SU tried to boot to them but you had stock recovery? Or am I wrong?
How did you root originally?
And yes, you need to get into download mode, you likely need to flash stock with Odin again. Without download mode or even recovery mode... You are stuck.
At the moment I am trying to get my hands on JIG USB which enables me to go Download mode. and then flash ROM from ODIN.
The exact model is S2 i9100.
Hopefully it works for you! In the future then, all questions and issues about your device would go here,
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting
Good luck!

Note Edge bootloop: phone screen goes black after Samsung logo, what are my options?

i have a galaxy note edge, but couple of days back when i unpluged my phone from the charger and tried to turn it on it would not boot up properly;even if it did it would turn itself off at different times. so i had decided to flash stock rom, thinking this could solve the problem. i downloaded stock rom from sammobile, flash it via odin,and it was successful;but when the phone rebooted with "recovery booting" on the top left of the screen then the screen went black. to turn the the device on again i have to pull the battery out and put back in after 10-15 seconds. and now whenever i try to turn the device on, it boots up with "recovery booting'' on the top left of the screen but goes black as soon as the samsung logo shows up. i don't know what's causing this problem.
if anyone out there could help me get out of this problem,i would greatly appreciate it
thanks in advanced
novinmia said:
i have a galaxy note edge, but couple of days back when i unpluged my phone from the charger and tried to turn it on it would not boot up properly;even if it did it would turn itself off at different times. so i had decided to flash stock rom, thinking this could solve the problem. i downloaded stock rom from sammobile, flash it via odin,and it was successful;but when the phone rebooted with "recovery booting" on the top left of the screen then the screen went black. to turn the the device on again i have to pull the battery out and put back in after 10-15 seconds. and now whenever i try to turn the device on, it boots up with "recovery booting'' on the top left of the screen but goes black as soon as the samsung logo shows up. i don't know what's causing this problem.
if anyone out there could help me get out of this problem,i would greatly appreciate it
thanks in advanced
Click to expand...
Click to collapse
Try to delete data & cache in recovery and reboot again
Sent from my SM-N915G using Tapatalk
[email protected] said:
Try to delete data & cache in recovery and reboot again
Sent from my SM-N915G using Tapatalk
Click to expand...
Click to collapse
thanks for your reply,but i cant go to recovery. i tried holding vol up+home+power buttons together, the phone boots up and goes to note edge screen but then it turns off like before. i also tried flashing cwm and twrp, but the same problem keeps happening. but i can go to download mode
I found this. This could be the same issue i am facing:
http://forum.xda-developers.com/showthread.php?t=1840030
but i need a solution for my galaxy note edge.
you have the incorrect recovery flashed, double check it and reflash. hold home+vol down+power then press volume up when prompted. use odin from pc to flash the correct recovery.
j.brown419 said:
you have the incorrect recovery flashed, double check it and reflash. hold home+vol down+power then press volume up when prompted. use odin from pc to flash the correct recovery.
Click to expand...
Click to collapse
I flashed stock rom, but that didn't help; I still can't get the phone to turn on properly. The phone turns off as soon as the Samsung logo shows up, I am on stock recovery.
I flashed stock rom and it loads successfully,the phone reboots with "recovery booting" on the top left of the screen,but the screen goes black as soon as the text "galaxy note edge powered by Android" shows up.
I'm desperately trying to find a way out of this problem, so please help me.
best regards

Samsung Galaxy S4 bootloop

Hi, I have a Galaxy S4 I9500 and I'm using GEAR CM13
The ROM was working fine until a while ago, but now suddenly there's a bootloop. Last thing I remember doing was accidentally holding the power button a bit long (while trying to lock the phone) so the power off/reboot menu came up and and then I tried to exit from it, but the menu didn't go away and the phone entered into a boot loop
Now, the Samsung i9500 logo just keeps flashing every 5 seconds. I'm unable to enter into recovery mode. I can enter download mode but it just exits out of that after 5 seconds and starts flashing i9500 logo again. I read about a hack to remove battery as soon as I enter download mode and it worked. It stays on download mode now. ODIN recognizes the device. What can I do using ODIN to fix the bootloop? Is there any ODIN flashable zip? I'm on the latest [20160711] build. I have important data in my device. Please help me recover it
I know I can reflash stock ROM and from there, reflash GearCM13 but I do not want to lose data as much as possible. I'm trying for fixes which do not wipe my data partition. I will go ahead with the standard method if I do not find a fix to recover from bootloop without losing data.

Rooted S8+ AT&T Stuck on Boot Screen, Please Help!

I successfully rooted my S8+ using the Sampwned method, it was buggy and I lost the ability to use wifi-calling so I decided to revert back to stock firmware.
I downloaded stock AT&T Firmware from Samsmobile website. Went into odin flashed the firmware, it ran everything successfully however when the phone went to reboot,
it go stuck on the "Samsung Galaxy S8+" Screen.
Below where it says Samsung Galaxy s8+,
there is an Icon of an open Lock, with the word "Custom" below it.
And below that it says "Powered by Android"
I am not able to do anything from this screen at all!
I can't get back into download mode, I can't boot into safe mode. I cant hard reset.
Nothing works for me at all.
What can I do to fix this?
that happened the first time i rooted. whet i did was:
1) hold the power and volume down buttons together until screen shuts off,
2) immediately after (right when the screen goes black) let go quickly and hold bixby button, volume down, and the power button.
it should boot into download mode. i had to do it a few times before it registered, if not hold power and volume up buttons until it reaches that upload scrren and you should be able to get to recovery. hope it helps. goodluck
Csmith9918 said:
I successfully rooted my S8+ using the Sampwned method, it was buggy and I lost the ability to use wifi-calling so I decided to revert back to stock firmware.
I downloaded stock AT&T Firmware from Samsmobile website. Went into odin flashed the firmware, it ran everything successfully however when the phone went to reboot,
it go stuck on the "Samsung Galaxy S8+" Screen.
Below where it says Samsung Galaxy s8+,
there is an Icon of an open Lock, with the word "Custom" below it.
And below that it says "Powered by Android"
I am not able to do anything from this screen at all!
I can't get back into download mode, I can't boot into safe mode. I cant hard reset.
Nothing works for me at all.
What can I do to fix this?
Click to expand...
Click to collapse
Let the battery run out then charge and try to boot

Categories

Resources