Database Info

[Completed] [Q] Samsung Galaxy tab 2(gt-p3100) restarts automatically.

Hello everyone, I own a Samsung galaxy tab 2 (gt-p3100).
I rooted my device and installed a custom recovery(cwm 6.0.2.7) on it around 5 to 6 months ago but kept the stock firmware(android 4.1.2_India) as it was and the device was working perfectly then onwards.But now from few days all of a sudden my device automatically restarts after a time of 50 to 60 secs after completely booting up the firmware.I thought it is a problem with my stock OS and so I tried to flash the Carbon Rom(an4.4) and Slim rom(an4.4.4) but got STATUS 7 error,after reading some posts it came to my notice that i will have to update the custom recovery in order to flash kitkat roms .So, I tried flashing cwm 6.0.5 and philz 6.07.9(tried both methods...through ODIN and through my sdcard) and every time flashing custom recovery is successfully done.But when i again enter in my device's recovery mode it shows cwm 6.0.2.7 and nothing is updated .SO, as nothing worked I decided to flash the original firmware again through ODIN which got stuck at around 60% and gave an error message(FAILED!) in odin. Tried installing stock firmware(IND and EUROPE) 2 times through ODIN but encountered the same problem.
Any help regarding this topic would be appreciated.

Hi there,
You must post/read in the dedicated forum for this device here:
> Samsung Galaxy Tab 2 > Galaxy Tab 2 Q&A, Help & Troubleshooting
or ask directly in this thread: The Galaxy Tab 2 Help Thread [Ask Any Question!
Good luck

Thread closed, thank you.

[Completed] [Q] Recovering my nexus 5

I have installed miui rom on my nexus 5 and yesterday i tried updating franco kernel on hopes that it will give longer battery life. But unfortunately i guess the kernel isnt compatible with the rom and miui will just hang in the logo screen wont load at all.
I tried getting into recovery and cleaning up everything but still no luck.
adb/fastboot doesnt detect my device at all. Can someone through some light on how to recover my phone now.
Also I got clockwork recovery installed. is there a way for me to directly gets files from internet or push to the devices ?

Hi,
You can always just flash miui again and that will restore it's kernel. Then you will be back up and running. If miui zip is still on your device.
Otherwise, you can try restoring stock... But you need to sort out your driver issues to use fastboot. Try reinstalling the n5 drivers, try another cable... Even try another computer. Here's a guide on returning to stock,
> Google Nexus 5 > Nexus 5 General > [TUTORIAL] How to flash a factory image | Return to stock | Unroot/SAVE your Nexus 5
Any further questions about your device should be posted here...
> Google Nexus 5 > Nexus 5 Q&A, Help & Troubleshooting > [HELP THREAD] Nexus 5 | Ask any question
Good luck!

Thank you. Thread closed.

[Completed] [Q] Screwed up Galaxy S4 rooting and flashing custom rom?

I just recently rooted my Galaxy S4 using Odin and then installed TWRP 2.6.0.0, I then tried to install this custom ROM http://forum.xda-developers.com/showthread.php?t=2557353 which is a Android Lollipop 5.0 ROM, I wiped the device using TWRP, followed every step right but when I rebooted the phone it didnt work and now Samsung Galaxy S4 GT-I9505 appears when I turn it on only to disappear in a matter of seconds, I can get to download mode and after a couple of tries recovery mode too, my computer doesnt know the phone is there when I plug it in either.... what can I do?! Sorry if I'm not making much sense I'm not too good at things like this

Hi, thank you for using XDA Assist. It sounds like you should flash the stock firmware in Odin and start the process all over. Please ask any questions in this thread, http://forum.xda-developers.com/showthread.php?t=2192886 where the experts on your device can help.

[Completed] Zenfone 6 black screen after wrong flashing

Good morning to all of the bosses here and to everybody...I am also new in adventuring in custom rom flashing. Oh God, I just afford a zenfone 6 and quickly I decided to mod it with custom roms. I tempted to update it manually to lollipop and it was successful. Then I decided to downgrade to kitkat in order to unlock the bootloader. I was served on internet with 2 ota files(6.2.2.2 and 6.3.3.3). I flashed the file 1 with success but as for the file 2, my phone didn't finished the process and switched off itself. I turned it on and it directly went on recovery trying to finish the downgrade. When the phone tried to reboot it stucked on asus logo. I went on recovery and made a hard reset, but it kept stuck on the asus logo at boot. Now came the bad luck; I found tutorial on internet on how to unbrick zenfones. I precise that almost all the tutorials spoke about the case zenfone 5 and 6 are stuck on usb logo, but mine manifested itself in a cycle of 5 to 7 reboots before showing the usb logo and then turns off itself definitively about one minute after that usb logo, and I have to turn it on again for a new cycle again. So that bad luck is that I saw that tutorial to unbrick zenfone with a method using usb intelsoc and other tools I forgot the names. I installed these stuffs with success and my device could be detected ready for flashing. The files that had to be flashed are fastboot.bin, ifwi.bin, dnx.bin, osr dnx.bin...I flashed them successfully, but unlesse I get my phone on its usual asus droidboot screen, it ended up by a frozen intel inside logo. I tried to put it into droidboot or recovrey, but to no vail. The reboot cycle was still there. Then I saw a tutorial on zenfone 5 stuck at intel inside logo where it was said to add a file called ...fuse.bin. I tried to find one for zenfone 6, but I didn't find it...so...so...so I used that fuse.bin intended for zenfone 5 and flashed my zenfone with it. The flash wax successful but when the phone rebooted...BLACK SCREEN!!! With some vertical white stripes appeared. No image, but cycle of reboot continue without the usb logo this time. The phone is still detectable and I even tried to reflash the previous file without that bad fuse.bin, successful but screen is still black...oh God help me, oh my new phone, everybody here help me recover my phone please!!! The version of my phone is TW version...thanks in advance!

Hello and thank you for using XDA Assist,
your device don't have a device specific forum here on XDA. Please create a thread here:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you. Good luck!
Kind regards
Trafalgar Square
XDA Assist

[Completed] I need your help to unbrick my phone. (Samsung Galaxy Note 3 sm N9005.

I tried to root my device and it went quite well. Then I tried to flash a custom rom (Darkwolf S7 edge port) on my phone but I ended up in a bootloop where it was stuck on the samsung logo for hours. I tried different stuff to get out of it but nothing worked so I decided to flash the stock rom onto my phone and at the odin status I get "FAIL". And on my device it shows "Volume Size is too big 4620289 < 4718599. And my phone is unusable. I need some help asap to fix it.

XDA Visitor said:
I tried to root my device and it went quite well. Then I tried to flash a custom rom (Darkwolf S7 edge port) on my phone but I ended up in a bootloop where it was stuck on the samsung logo for hours. I tried different stuff to get out of it but nothing worked so I decided to flash the stock rom onto my phone and at the odin status I get "FAIL". And on my device it shows "Volume Size is too big 4620289 < 4718599. And my phone is unusable. I need some help asap to fix it.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please have a look at the Note 3 homepage:
http://forum.xda-developers.com/galaxy-note-3
If you create an XDA account, you can ask the experts for help, here:
http://forum.xda-developers.com/galaxy-note-3/help
Good luck and welcome to XDA!