Good morning to all of the bosses here and to everybody...I am also new in adventuring in custom rom flashing. Oh God, I just afford a zenfone 6 and quickly I decided to mod it with custom roms. I tempted to update it manually to lollipop and it was successful. Then I decided to downgrade to kitkat in order to unlock the bootloader. I was served on internet with 2 ota files(6.2.2.2 and 6.3.3.3). I flashed the file 1 with success but as for the file 2, my phone didn't finished the process and switched off itself. I turned it on and it directly went on recovery trying to finish the downgrade. When the phone tried to reboot it stucked on asus logo. I went on recovery and made a hard reset, but it kept stuck on the asus logo at boot. Now came the bad luck; I found tutorial on internet on how to unbrick zenfones. I precise that almost all the tutorials spoke about the case zenfone 5 and 6 are stuck on usb logo, but mine manifested itself in a cycle of 5 to 7 reboots before showing the usb logo and then turns off itself definitively about one minute after that usb logo, and I have to turn it on again for a new cycle again. So that bad luck is that I saw that tutorial to unbrick zenfone with a method using usb intelsoc and other tools I forgot the names. I installed these stuffs with success and my device could be detected ready for flashing. The files that had to be flashed are fastboot.bin, ifwi.bin, dnx.bin, osr dnx.bin...I flashed them successfully, but unlesse I get my phone on its usual asus droidboot screen, it ended up by a frozen intel inside logo. I tried to put it into droidboot or recovrey, but to no vail. The reboot cycle was still there. Then I saw a tutorial on zenfone 5 stuck at intel inside logo where it was said to add a file called ...fuse.bin. I tried to find one for zenfone 6, but I didn't find it...so...so...so I used that fuse.bin intended for zenfone 5 and flashed my zenfone with it. The flash wax successful but when the phone rebooted...BLACK SCREEN!!! With some vertical white stripes appeared. No image, but cycle of reboot continue without the usb logo this time. The phone is still detectable and I even tried to reflash the previous file without that bad fuse.bin, successful but screen is still black...oh God help me, oh my new phone, everybody here help me recover my phone please!!! The version of my phone is TW version...thanks in advance!
Hello and thank you for using XDA Assist,
your device don't have a device specific forum here on XDA. Please create a thread here:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you. Good luck!
Kind regards
Trafalgar Square
XDA Assist
Related
I was trying to update my firmware and kept it on charging and after that if i switch on my mobile its coming NO command with a dead Andi. I tried POWER+VOL UP. some thing with title DROIDBOOT PROVISION OS comes i tried every options (factory reset, reboot, reboot droidboot) but nothing happens. When i connected it to pc a usb logo with a red bar (was white before) came.. plz help. Thank in advance.
Hi there,
Please register an account on XDA and see this thread where you can ask directly for an relevant answer:
Asus zenfone 5/ 6/ Indian (WW) Q&A support thread
ASUS Zenfone 5 and Zenfone 6 - All you need to know about.
Good luck
Hello, i'll explain my case and hope can find some help.
A month ago, I flashed my S3 Mini I8190 with CyanogenMod 12.1 (Lollipop) and everything went well.
4 days ago, the phone died. I had it on my pocket and when I was going to use it, the phone was off and won't turn on. It won't respond, vibrate, even when connecting it to the charger.
Anyways, a friend told me that it may be a problem with battery and I should let phone plugged to the wall charger for 24 hours, and it worked (at least phone wasn't dead)
The phone responded, it turnedon but won't boot. It reach until model name screen (before Samsung Logo, or in this case, CM logo) and then starts to reboot. I tried to flash it again with CM and didn't worked. I flashed it with Stock Rom and didn't worked.
I flashed it with Param file and didn't worked.
The problem persists, it only reachs the model name screen and the reboots.
[!] I can't enter into Recovery Mode, only Download Mode. I tried flashing TWRP Recovery, ClockworkMod Recovery but still can't enter into Recovery Mode.
So, anyone knows how to fix this? I want to try a final thing before taking the phone into a JTAG Service.
Sorry for bad english.
Hello and thank you for using XDA Assist,
Please create an account, so you can post in other sections. Then I will have your thread moved to the Galaxy S3 Mini Q/A. Please create an account and post in this thread.
Experts there may be able to help you there.
Kind regards
Trafalgar Square
XDA Assist
Hey, guys good afternoon. I have a Cubot Note S which I manage quite stupidly, to brick. The phone was rooted with KingRoot and I accidentally press to update to the latest software version from the Update Center of the phone and before it managed to complete, it showed an "ERROR" message. After that, I stuck into a boot loop. I've been searching the internet for a stock firmware of the phone in a .zip file because the Cubot has something like a stock Recovery mode, which I can boot to, to factory reset my phone, to boot into bootloader or apply an update through an sdcard etc. So far I only found a rom on needrom and it is in .rar and has many other irrelevant files in it. It has instructions below how to perform a clean flash of the ROM, but something goes wrong at the process. Either the SP-DMT (Flash Tool) doesn't work properly or my computer doesn't recognize my phone and I can't find the proper drivers for it. Has anyone ever been in this situation before with a chinese phone? Please help out with this because the cell phone belongs to a dear friend of mine and I can't afford to buy a new one these days. Thank you in advance.
Hello and thank you for using XDA Assist,
please create a thread here:
Android Q&A, Help & Troubleshooting
Kind regards
Trafalgar Square
XDA Assist
Hi Guys
Can someone point me in the right direction with a problem with my new phone.
Basically I recently bought a ulefone Vienna (1 month and my 1st Android phone). It was working fine and on the stock rom and no changes to the system. Yesterday I did a OTA update and now my phone is stuck in a bootloop.
The phone just restarts and after after the company logo I get the Android man with an exclamation mark.
I have downloaded all the stuff to flash the phone from ulefone but as the phone keeps restarting and rebooting I can not get the PC to install the drivers.
The PC recognises the phone when the company logo is on the phone and starts to install the drivers but when I get the Android man the PC says the phone is unplugged.
I am IT literate and don't mind getting my hands dirty but I am a recent convert to Android. I want to fix the issue myself because that's the way to learn but I am a little out of my depth.
I have read that ADB can stop the boot sequence so any pointers to what I need to read and understand to fix this issue would be greatly appreciated.
Thanks.
The_Bionic_Man said:
Hi Guys
Can someone point me in the right direction with a problem with my new phone.
Basically I recently bought a ulefone Vienna (1 month and my 1st Android phone). It was working fine and on the stock rom and no changes to the system. Yesterday I did a OTA update and now my phone is stuck in a bootloop.
The phone just restarts and after after the company logo I get the Android man with an exclamation mark.
I have downloaded all the stuff to flash the phone from ulefone but as the phone keeps restarting and rebooting I can not get the PC to install the drivers.
The PC recognises the phone when the company logo is on the phone and starts to install the drivers but when I get the Android man the PC says the phone is unplugged.
I am IT literate and don't mind getting my hands dirty but I am a recent convert to Android. I want to fix the issue myself because that's the way to learn but I am a little out of my depth.
I have read that ADB can stop the boot sequence so any pointers to what I need to read and understand to fix this issue would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here except these two threads:
Ulefone Vienna - Development & Support
Ulefone Vienna - Information & Reviews
Try posting your query in the support thread. Experts there may be able to assist you.
Good luck
Art Vanderlay
XDA Assist
Please resolve this issue!!
I wanted to try Cyanogen mod (1 3) on my Zenfone 2. Therefore I followed some threads on XDA and 1st first step was to unlock the bootloader.
I followed the method to unlock the bootloader. Which was to download and install some unlocker app. But it didn't work, reason shown was, device isnt supported. I was damn sure that app was for my device model asus zenfone 2 ze551ml.
I was pissed off as I couldn't unlock the bootloader. Which made me curious to find other ways to unlock my bootloader. I saw a thread on XDA forum which explained a method to unlock the bootloader using a tool , that tool is "ZE551ML_Modder V3.2" .
I downloaded it and followed the instructions to unlock the bootloader using "ZE551ML_Modder V3.2". I successfully completed the procedure and disconnected the mobile phone and tried to switch it ON. And there you go, my mobile went into a BOOT LOOP.
I got worried and thought I may not have done the unlocking properly, so I did that procedure to unlock the bootloader again using "ZE551ML_Modder V3.2".
After completing that process for second time I tried to switch ON the mobile thinking it might be ready to install cyanogen mod. But that just ruined the mobile even more. At this time I used XFSTK DOWNLOADER and tried to dump in the Stock rom.
After this my Zenfone 2 literally dead. ->Dosn't go into boot menu/fastboot menu/ recovery mode.
->Doesn't switch ON.
-> no PC detects it!!!
_>> When I switch it ON a screen of death appears forever until i switch it off. The screen looks like a TV. screen when theres no signal with some colors(TV screen without signal will be a dotted in black and white whereas on My mobile it's in color)
I bought this mobile just and year ago, but unfortunately the WARRENTY period was over 4 days before this happened.
I went to Asus service center, they said they will have to change the motherboard and it will cost 70% of the price of my mobile, which is way too much because in that price I can get a new zenfone 2 as the prices got slashed.
I also visited the local repair shops but they are unable to resolve the issue!!
I am very much worried, if any one from this forum resolve my issue then I will be thankfull!!
Hello and thank you for using XDA Assist,
please create an account and post your question in our Android Q&A section:
ZENFONE 2 Q&A, HELP & TROUBLESHOOTING
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist