[Q] Help to clarify for dual boot - Galaxy Tab 2 Q&A, Help & Troubleshooting

Hello,
I read the post related to dual boot (http://forum.xda-developers.com/showthread.php?t=2285366) and i need to know what to do in nice order
I have a Galaxy tab 2 7 P3110 with JB 4.2.2
would like install cm-11-20140922-NIGHTLY-p3110.zip in 2nd rom
rooted : ok
i installed GT-P3110_PhilZ-Touch-Recovery_6.57.9-2-blackhawk-f2fs.zip : ok
I made a backup of the rom : ok
I dowloaded many tools indicated in the post :
proprietary-vendor-samsung.zip
vendor-blobs-new-ducati-blackhawk.zip
blackhawk-next-kernel-2.2-p31xx.zip
aromafm_p3110-20140227.zip
GT-P3110_Recovery_Switcher_1.0.0.zip
But now i'm afraid to do error !
Is there anyone could tell me steps i need to follow (step by step)
I think i didn't forget details, please let me know if informations are necessary.
Thank you very much

Hello
Finally i installed 2nd rom and i understood how to do ! :good:
It's simply when you know what zip file to use
Now i have a problem.
I tried 2/3 CM roms and finally i would like delete dual-boot : i delete file .secondrom as described in FAQ and it works.
Today i tried to follow tutorial to do again dual boot but i never have menu with primary boot and secondary boot and recovery.
I made factory reset and reinstall official rom JB 4.2.2 and tried again :
1/root OK
2/install GT-P3110_PhilZ-Touch-Recovery_6.57.9-2-blackhawk-f2fs.zip OK
3/ install blackhawk-next-kernel-2.2-p31xx.zip OK
4/ install proprietary-vendor-samsung.zip OK
but in reboot i haven't boot menu ...
i saw that directory .secondrom is not in data/media but directly in root.
Is that the problem ?
Have you got an idea ?
Than you in advance for your help
BR

UP

Thierry14150 said:
UP
Click to expand...
Click to collapse
Hello,
Finally i flashed official Rom 4.1.2
I made factory reset because i had bootloop

Related

Directly booting to recovery

I have a rooted S-7500, with CWM recovery 5.0.2.8 installed. I (by mistake) allowed the 'software update' option to install a system update(or something) today by mistake (I know, you should never install system updates after rooting. My bad.) Since then, the phone directly goes to the cwm recovery mode on powering on, and i am unable to do anything else
I am not very well versed with the finer details of rooting bootloader recovery n all...so pls some details with steps...if possible .
Any help whatsoever...please I will be really grateful
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system ​
j.posarekar70 said:
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system ​
Click to expand...
Click to collapse
Thanks!!! It totally worked!
Just a clarification...now that i have got the stock rom back on my phone...am i right in saying that I have lost root access, my phone is totally back to the 'original' state, and i have lost CWM as well? Please correct me if I am wrong.
And assuming that I am correct(above), I would like to re-root my device(need to use proxydroid to surf internet over the damned proxy server!). So..can I follow the standard method, ie, can I do it the same way I had done before, or do i need to do something different now?
And once again...THANK YOU for your help! I had ended up hard bricking my previous phone, and was really scared when this happend to my aceP. You saved me!
Easy way to ROOT your SGAP
Yes by the time you flash stock rom you loss root even any custom recovery you flashed before...
but now if you want to root your SGAP again don't follow that guide again which you done before just follow this :
Download ODIN from Downloading link below (inside ODIN software folder)
Download any one recovery which you like TWRAP / CWM v5.5 (inside Custom recovery folder)
Download Root_SGAP.zip from Root folder & place that zip inside in your sd card
Click to expand...
Click to collapse
Download Link : GALAXY Ace Plus - Basic stuff
FOR Custom_Recovery :
Open odin, be sure your system has already install drivers & if kies is there close it.
extract recovery zip
connect device to pc in download mod (vol down + power + home) & select that (recovery) .md5 file in pda section inside ODIN software
Click start & wait to reboot device
FOR ROOT :
Now boot device in CWM mod ( vol up + down + power + home)
choose zip from sd card & select Root_SGAP.zip
DONE.
Click to expand...
Click to collapse
you've successfully ROOT & flash custom recovery on your device by just few simple steps ​
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
dubey.arpit said:
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
Click to expand...
Click to collapse
if you are going to stick on stock rom forever & only want to root device then stock recovery is ok for you...
but while dealing with custom roms, custom recoveries are smart choice.
it has lot of additional options than stock recovery.
so my opinion yes use custom recovery ​
Stuck in boot loop
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Snowflakes91 said:
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Click to expand...
Click to collapse
Check my guide on how to fix a bootloop in my sig
Question About Flashing A Stock ROM
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
cwm fixed
davidboca2000 said:
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
Click to expand...
Click to collapse
The new cwm by mb-14 is fixed and there are no more bootloops​
Reply
bibhu60 said:
The new cwm by the wisp is fixed and there are no more bootloops​
Click to expand...
Click to collapse
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Here it is..
davidboca2000 said:
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Click to expand...
Click to collapse
CWM 5.5.0.4 BY mb-14
I am also using this recovery from months i have flashed many roms and mods but it does not have any bugs.
Working perfectly...
Hit thanks if I helped You don't say it...
​
thanks
thanks for help

[Q] (Q) ¿Error al entrar en CWM?

Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk
CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?
matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.
CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!
Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps
Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made​​?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)
you need to wipe it 1st before flashing CM11 and Gapps...
Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS

[Q&A] [WIP] [ROM] [Dirty Developers] [4.4.4] CM11

Q&A for [WIP] [ROM] [Dirty Developers] [4.4.4] CM11
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [WIP] [ROM] [Dirty Developers] [4.4.4] CM11. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hey i have a problem with this rom
hey i have a problem with this rom
it's my first time to rom my mobile
it's steps what i do
1- clockworkmod recovery 6.0.3 for samsung galaxy ace plus
2- Rooted my mobile and got a Supersu app after restart mobile
3- put rom file .zip in my sd and shutdown my mobile
4- i go in recovery and Wipe your data/cache, including the Dalvik Cache.
5 - when i try to setup the rom i got " status 7 install aborted "
Good evening,
Well,
Not needed root!
1. If i don't have any recovery, flash clockworkmemory or twrp! In my opinion is better twrp
2. Copy .zip into your sd card
3. Reboot into recovery
4. Wipe data, cache, dalvik e system! Remember, is very important wipe System for an clean installation
5. Flash zip from sd-card
6. Reboot
here you go buddy
http://forum.xda-developers.com/gal...de-how-to-make-version-flashable-via-t2958667
What about android lollipop ?
Facing bugs after installation of Cynogenmod 11 in S7500
Hi,
There is some problem to be highlighted after installation of cynogenmod11 OS in Samsung GT-S7500 model.
Request you ton please fix this issues in upcoming updates.
1) Restart the Mobile after 4-5 Hrs duration.
2) Restart the Mobile after disconnecting USB from PC.
3) Sometime mobile are totally hang during using of application like Whatapp, Hike, Facebook messenger etc.
4) Video recording not working.
5) Camera pic quality is poor.
6) Battery draining faster.
GPS seems to not working. (dirtydev cm11)
Hi.
I try to explain with a few words.
I can't localize my position with GPS.
I tried Sygic, (new and old versions), Copilot. I activated only the gps of the device. But it never finds my position.
Have you got the same problem?
PS: sorry for bad english.
sd swap
hi first can i say a big thanx for all the hard work you do. so far im trying to decide if speed mod or this rom is the best. i prefer all the things on this 1 but only thing making me favour speed mod is the option to use external has primary. ive tried all the different options i read on how to swap on cm11 but none seem to work for me, if thi option was available this rom would be the best by far
guys can i flash this on my GT-S7500T ??!!!
I afraid that I will get a BRICKED phone!
pls help me what should i do?!
any one tested this before?!!
Im still on 2.3.6
Happy valentine guys
any suggestion for my problem?!
some one help me pls.
I afraid that I will get a BRICKED phone!
But I need android 4 version
i would like to know which CWM or TWRP to use to flash this rom?
and please be humble to share the link as well.
sorry i must have failed to see if it was mentioned somewhere.
thanks in advance
Problem with CM11
When I flash CM I get the following:
assert failed: getprop("ro.product.device") == "trebon: || getprop ("ro.product.device") =="trebon"
Click to expand...
Click to collapse
I'm lazy to mention all but in the end it writes: GT-S7500 two times and
Error in cm-11-20150113-DirtyDev-trebon.zip
Status 7
Installation aborted.
Please help me
ariton1 said:
When I flash CM I get the following:
I'm lazy to mention all but in the end it writes: GT-S7500 two times and
Error in cm-11-20150113-DirtyDev-trebon.zip
Status 7
Installation aborted.
Please help me
Click to expand...
Click to collapse
When you have downloaded the zip, have you unzip and edited it? Or have directly flashed the zip?
Anyway, is strange or is a recovery's problem or you have edited the zip in some way
vksberi said:
i would like to know which CWM or TWRP to use to flash this rom?
and please be humble to share the link as well.
sorry i must have failed to see if it was mentioned somewhere.
thanks in advance
Click to expand...
Click to collapse
Both recovery should be ok!
ticoo said:
guys can i flash this on my GT-S7500T ??!!!
I afraid that I will get a BRICKED phone!
pls help me what should i do?!
any one tested this before?!!
Im still on 2.3.6
Click to expand...
Click to collapse
I have not idea, you should try!
I'm not sure, but if you'll brick the phone you can restore with re-flashing the stock rom
WebKit Lag
How much longer will it be till the WebKit lag is fixed? It's really "bugging" me off c:
10/10 best pun 2015
please help guys i have no recovery or factory reset
Hi thanx for all your time and effort you put into roms. I have been using cm11 for few weeks but all of a sudden i cant enter recovery or do factory reset I've tried hard reset I've tried factory reset option but nothing works. My phone tries to enter recovery because screen flashes then stays blank but i can enter download mode. I was going to try Odin but im worried has i have no nandroid back up. Please help guys if anyone has a answer for this i will be very grateful. My phone has been working great up until now
Many thanx you guys are the best
please add step-by-step how to install this rom
Problem in installing this ROM
I am getting error in Recovery that "this ROM is for GT - S7500 and your device is GTS7500".(Error status 7) What should I do now?
DevMeena401 said:
I am getting error in Recovery that "this ROM is for GT - S7500 and your device is GTS7500".(Error status 7) What should I do now?
Click to expand...
Click to collapse
Probably you are trying to flash the rom with CWM you must change the recovery, flash TWRP 2.5.0.0 with odin
zyxw-androidiani said:
Probably you are trying to flash the rom with CWM you must change the recovery, flash TWRP 2.5.0.0 with odin
Click to expand...
Click to collapse
Tried but in TWRP it is just skipping MD5 sum and said process complete but inside the phone nothing changed. I don't know what to do, in TWRP I am unable to locate my old back up while in CMW it is not allowing me to go back using same back giving me error of MD5 sum.
DevMeena401 said:
Tried but in TWRP it is just skipping MD5 sum and said process complete but inside the phone nothing changed. I don't know what to do, in TWRP I am unable to locate my old back up while in CMW it is not allowing me to go back using same back giving me error of MD5 sum.
Click to expand...
Click to collapse
Which rom already have you ?

[q] asus padfone 2 (unrooted ) jelly bean 4.1 stock on asus boot logo ( help please

HI I NEED YOUR HELP PLEASE : I HAVE ASUS PADFONE 2 suddenly WHEN I WAS SEARCHING ON GOOGLE ITS SHOW ME ( unfortunately google app has stopped ) AND STOCK THERE SO I DID RESET AFTER THAT THE PHONE ITS STOCK ON BOOTING UP ASUS LOGO AND AFTER 15 MINT ITS PASS THE BOOT LOGO AND ITS SHOW ME ON THE TOP ( ENCRYPTION UNSUCCESSFUL ) AND ON THE BOTTOM ( RESET PHONE ) BUT WHEN I HIT ON RESET PHONE IT DOES NOT DOING ANYTHING THE PHONE ITS ( UNROOTED ) AND IT WAS RUNNING ANDROID JELLY JEAN ( 4.1) AND I CAN GET INTO STOCK RECOVERY AND I DID WIPE DATA/ FACTORY RESET AND WIPE CACHE PARTITION BUT STILL STOCK ON BOOT LOGO AND NOT BOOTING NORMALLY AFTER I USED ( ADB BOOT LOADER ) AND TRIED TO FLASH A NEW FIRMWARE BY USING ( CWM RECOVERY ) I DIDNT FLASH THE CWM RECOVERY JUST USED THE IMG RECOVERY TO FLASH THE FIRMWARE ( INSTALL ZIP FROM SIDELOAD ) AND I SENT THE FIRMWARE TO MY PHONE BUT THE CWM RECOVERY COULDN'T FLASH IT ( UNSUCCESSFUL ) BECAUSE CWM RECOVERY ITS GAVE ME EVERY TIME ( E: CANT MOUNT ) ANYTHING I DID WITH CWM RECOVERY IT DOES NOT WORK SO I NEED YOUR HELP GUYS PLEASE ANYBODY CAN HELP ME WITH THAT I WILL BE APPRECIATED AND THANK YOU PLEASE HELP NOTE : I DONT KNOW WHAT IS THE BUILD NUMBER ON MY PHONE BUT I BOUGHT IT FROM TAIWAN .... HEY GUYS CHECK THE PICS PLEASE WHICH I POSTED AND THANKS
What for a ROM and CWM Version have you using?
CWM6.0.2.9 goes not for the most ROMs! You must need CWM6.0.4.4 or higher, or TWRP-Recovery for Padfone 2!
Perhabs your Device can reactivatet by a new Firmware-Flash with CWM6.0.4.4 or TWRP!
Thank you so much for your replies
roselanguste said:
What for a ROM and CWM Version have you using?
CWM6.0.2.9 goes not for the most ROMs! You must need CWM6.0.4.4 or higher, or TWRP-Recovery for Padfone 2!
Perhabs your Device can reactivatet by a new Firmware-Flash with CWM6.0.4.4 or TWRP!
Click to expand...
Click to collapse
YES I WAS USED CWM:6.0.2.9 I TRIED OVER 20 TIMES WITHOUT ANY SUCCEED (UNSUCCESSFUL) AS SHOWN IN THE PICTURES WHICH I POSTED ALREADY I TRIED ALL THESE ROMS : TW_A68-11.8.4.12-0-ota-user.zip ,TW_A68-11.8.4.6-0-ota-user.zip,WW_A68-11.8.4.23-0-ota-user.zip,CHT_A68-11.8.3.3-0-ota-user.zip,CN_A68-10.4.17.7-0-ota-user.zip,HK_A68-10.4.17.7-0-ota-user.zip,TW_A68-11.8.4.23-0-ota-user.zip ,,, I TRIED ALL THESE ROMS BECAUSE I DONT KNOW WHAT IT WAS MY ( BUILD NUMBER ) I CANT REMEMBER I JUST KNOW IT WAS JELLY BEAN 4.1 AND MY PADFONE 2 MODEL A68 IT WAS NOT ROOTED IT HAS STUCK FIRMWARE AND HAS ( LOCKED BOOTLOADER ) AND I TRIED TOO : adb push firmware.zip /data/media for example :adb push TW_A68-11.8.4.23-0-ota-user.zip /data/media and i pushed already to my external storage because there is no memory card on this phone (sdcard) using the stock recovery and when i tried to install the update from the /data/media it shows : install update and after 15 mint it gave me installation aborted and i wanna tell you something else the CWM RECOVERY WHEN I USED IT I DIDNT FLASH IT I JUST BOOT LIKE TESTED :fastboot boot recover.img because i dont know if i can flash it or not because my phone its ( not rooted ) please i need your help and thank you so much and if you need more information just let me know because maybe i forgot something just let me know and thanks
false national rom!
I think you have Flash the fals national Rom! TW = Taiwan-ROM, CHT = China-ROM, WW = Worldwide-English, and so on! Thats named SKU Version of the ROM! When your padfone from Europa or USA than you need a WW or WWE ROM! It gives a thread on XDA for flashing other,false,back SKU on Padfones! Search that thread, there a tuturials for Changing or Flash back SKUs! Your device need a Flash back to his original SKU-Version of your ROM!
And for CWM your padfone must be unlocked! But thats simple! On Asus Homepage search your device, and than you can Download a Unlock-APK! Download and install thies apk on your padfone, and start it, than your bootloader is unlocked! And after that, you can install CWM or TWRP on several ways!
roselanguste said:
I think you have Flash the fals national Rom! TW = Taiwan-ROM, CHT = China-ROM, WW = Worldwide-English, and so on! Thats named SKU Version of the ROM! When your padfone from Europa or USA than you need a WW or WWE ROM! It gives a thread on XDA for flashing other,false,back SKU on Padfones! Search that thread, there a tuturials for Changing or Flash back SKUs! Your device need a Flash back to his original SKU-Version of your ROM!
And for CWM your padfone must be unlocked! But thats simple! On Asus Homepage search your device, and than you can Download a Unlock-APK! Download and install thies apk on your padfone, and start it, than your bootloader is unlocked! And after that, you can install CWM or TWRP on several ways!
Click to expand...
Click to collapse
i dont know what is the fals natinoal rom ? and i bought my phone from taiwan ? and i dont know what is my build version i cant remember ? and how i can unlock the bootloader and my phone its not booting up normally ? can you tell me what i have to do please step by step and thank you so much
Build-Number is not important!
May be i can help you! Can you start the device in CWM-Mode? Can you go in CWM? In case that you can, load a TW-ROM (TW=Taiwan) via ADB-Sideload over CWM to your device! Than the device should install the original TW-ROM automaticaly!
In case that CWM not Functional, try to turn off the device, wait 30-seconds, than hold the ``+`` (Plus) button on the side of the device, and turn on the device where you hold the ``+`` (Plus) button permanently! Yet should come the ASUS-Logo and in the Top of the Display should stand ``Fastboot-Mode``! Can you please try that, and say me what the device do!?
roselanguste said:
Build-Number is not important!
May be i can help you! Can you start the device in CWM-Mode? Can you go in CWM? In case that you can, load a TW-ROM (TW=Taiwan) via ADB-Sideload over CWM to your device! Than the device should install the original TW-ROM automaticaly!
In case that CWM not Functional, try to turn off the device, wait 30-seconds, than hold the ``+`` (Plus) button on the side of the device, and turn on the device where you hold the ``+`` (Plus) button permanently! Yet should come the ASUS-Logo and in the Top of the Display should stand ``Fastboot-Mode``! Can you please try that, and say me what the device do!?
Click to expand...
Click to collapse
I TRIED ALL THE TW : ROMS WHICH I SENT IT TO YOU ALREADY ABOVE AND I DOWNLOAD THESE ROMS FROM ASUS WEBSITE FIRMWARES ,, AND I SENT THE ROMS USING THE SIDELOAD TO MY PHONE AND IM NOT FLASHING THE CWM ON MY PHONE BECUSE MY PHONE ITS NOT ROOTED AND THE BOOTLOADER ITS LOCKED I JUST LET CWM TO BOOT ON MY PHONE NOT FLASH IT AND WHEN I TRIED TO INSTALL THE UPDATE USING CWM ITS GAVE ME ( INSTALLATION ABORTED ) STATUS 7 ERROR ,,,, check the pics please and thanks
Ok! I think it is the old CWM6.0.2.9 problem, this version of CWM has problems with flashing ROMs! BUT, there is one ROM on XDA for Padfone2 that must flash with CWM6.0.2.9! It is Tari's Padfone2 Custom ROM+Kernel! It is easy to find on XDA, and this ROM will flashing over Sideload with CWM6.0.2.9! Search on XDA for Tari's Padfone2 ROM, there you can Download the files, and there is also a step by step tuturial, follow that, and try!
And have you tested that Fastboot goes?
roselanguste said:
Ok! I think it is the old CWM6.0.2.9 problem, this version of CWM has problems with flashing ROMs! BUT, there is one ROM on XDA for Padfone2 that must flash with CWM6.0.2.9! It is Tari's Padfone2 Custom ROM+Kernel! It is easy to find on XDA, and this ROM will flashing over Sideload with CWM6.0.2.9! Search on XDA for Tari's Padfone2 ROM, there you can Download the files, and there is also a step by step tuturial, follow that, and try!
And have you tested that Fastboot goes?
Click to expand...
Click to collapse
yes i used cwm 6.0.29 ,, ok but you said taris padfone 2 rom its custom rom how am gonna flash it and my phone its not rooted and the bootloader on my phone its locked
wasim74 said:
yes i used cwm 6.0.29 ,, ok but you said taris padfone 2 rom its custom rom how am gonna flash it and my phone its not rooted and the bootloader on my phone its locked
Click to expand...
Click to collapse
yes i tried fastboot and sideload i have no problem with that i can send the roms to my phone but the problem my phone cant flash it ?
OK! But i think your Bootloader is Open, than otherwise, you cant go in Fastbootmode or CWM!? Fastbootmode and CWM (Recovery), that is the Bootloader!
You can go in CWM, then you can make the flash-prozedure of all ROMs! (Stock and Custom)!
Try Taris ROM! Go in CWM, make Wipe Data/Factory Reset, make Wipe Cache, and Sideload Taris ROM!
Did that not work, try CWM6.0.4.4 or TWRP-Recovery to Flash Original ASUS-TW-Firmware!
And when you can start CWM with - fastboot boot recovery.img - , than normaly you can also Flash it permanently with - fastboot flash recovery recovery.img - !
roselanguste said:
OK! But i think your Bootloader is Open, than otherwise, you cant go in Fastbootmode or CWM!? Fastbootmode and CWM (Recovery), that is the Bootloader!
You can go in CWM, then you can make the flash-prozedure of all ROMs! (Stock and Custom)!
Try Taris ROM! Go in CWM, make Wipe Data/Factory Reset, make Wipe Cache, and Sideload Taris ROM!
Did that not work, try CWM6.0.4.4 or TWRP-Recovery to Flash Original ASUS-TW-Firmware!
And when you can start CWM with - fastboot boot recovery.img - , than normaly you can also Flash it permanently with - fastboot flash recovery recovery.img - !
Click to expand...
Click to collapse
but i didnt unlock the bootloader on my phone how come its unlock i dont know ? so you mean i have to flash the cwm on my phone after that send one of the TW-ROMS to my phone and flash it too ,,, ok i will try that but from where i can get the cwm6.0.4.4 for padfone2 let me know please and thank you so much because you are help me with that ?
wasim74 said:
but i didnt unlock the bootloader on my phone how come its unlock i dont know ? so you mean i have to flash the cwm on my phone after that send one of the TW-ROMS to my phone and flash it too ,,, ok i will try that but from where i can get the cwm6.0.4.4 for padfone2 let me know please and thank you so much because you are help me with that ?
Click to expand...
Click to collapse
oh ,, just to let you know when i used the cwm 6.0.2.9 i cant do wipe -factory reset or wipe cashe its gave me e: cnt mount but on stock recovery i can do wipe cashe and factory reset but it take too long to do that
There is a other custom ROM for Padfone2 from Sissidroid! Search on XDA for - Guerilla ROM - it is easy to find, and in the thread to this ROM there is a link for Download CWM6.0.4.4. Because CWM6.0.4.4 is needed to Flash Guerilla-ROM from Sissidroid!
In Google search - TWRP for Padfone2 - then you find a TWRP-Site, from there you can Download TWRP-Recoverys for Padfone2. Take the Version 2.6.3.0 of TWRP, not other. The other Versions dont go! TWRP is a Recovery like CWM, but TWRP has a Touch-Interface, and the funtionality is often better than CWM!
roselanguste said:
There is a other custom ROM for Padfone2 from Sissidroid! Search on XDA for - Guerilla ROM - it is easy to find, and in the thread to this ROM there is a link for Download CWM6.0.4.4. Because CWM6.0.4.4 is needed to Flash Guerilla-ROM from Sissidroid!
In Google search - TWRP for Padfone2 - then you find a TWRP-Site, from there you can Download TWRP-Recoverys for Padfone2. Take the Version 2.6.3.0 of TWRP, not other. The other Versions dont go! TWRP is a Recovery like CWM, but TWRP has a Touch-Interface, and the funtionality is often better than CWM!
Click to expand...
Click to collapse
ok am gonna look for cwm6.0.44 and for twrp 2.6.3.0 and flash one of them on my phone not just like how i was did i mean just boot it and after that flash one of the roms which you told me about them already but just to remind you my phone its not rooted is that fine ... let me know and thank you so much my friend
The Root is here not so important. In most cases a ROM-Flash Unrooting the device! Every Time when i Flash a ROM, the device is after the Flash unrooted, and i must it Root again! Root is important for a Running System! And it gives a way to Root the Device over ADB/Fastboot, but i dont know how. But i have never Need a Root for ROM-Flash!
wasim74 said:
ok am gonna look for cwm6.0.44 and for twrp 2.6.3.0 and flash one of them on my phone not just like how i was did i mean just boot it and after that flash one of the roms which you told me about them already but just to remind you my phone its not rooted is that fine ... let me know and thank you so much my friend
Click to expand...
Click to collapse
sorry my friend : i mean my padfone 2 its not have root its ( unrooted ) so can i flash the custom recovery cwm or twrp on my phone and flash custom roms without having root on my padfone 2 ,,,,,, can i do that without root or i cant ? and thanks
Yes, you can do that without root! Important for that is only you can go in Fastbootmode and CWM/TWRP!
roselanguste said:
Yes, you can do that without root! Important for that is only you can go in Fastbootmode and CWM/TWRP!
Click to expand...
Click to collapse
hi my friend : i have problem with flashing the recovery { fastboot flash recovery recovery.img } i dont know why and i tried to just boot the recovery img for test : fastboot boot boot recovery.img i tried it with twrp and its show me just the picture TEAM WIN BUT ITS NOT FUNCTIONAL CHECK THE PICS PLEASE AND LET ME KNOW WHAT IS THE PROBLEM AND THANKS
On the pics i see, that recovery-flash was failure! In your CMD-pic, adb gives you a writing-failure! That can happen, when you try it ones! Try it again, and also with cwm! What for twrp version have you try? By right flashing, cmd gives you a sending recovery ok, and writing recovery ok! You have sending ok, but writing a failure!?
And what for adb/fastboot binarys use you?
P.s.: I have a important question, as you tryed to flash Asus Firmwares, have you unzip the Firmware before flashing? Or just Download and Flash how it is!

[Video][How-To]Fix Unable To mount /system while installing a ROM

This is a Video TUT on How to fix Unable To Mount /System Partiton
While Flashing A Rom:-
In The Video I have used the Multi-Rom TWRP 3.0.0 but this problem occurred with every Version
Watch the video - Video Starting is About the problem and then the solution to flash roms bypassing this prob.
*This is My First video so ignore Mistakes i made:silly:
Use EarPhone For Best Sound
Proper Method To -Install a rom From TWRP Follow:-
1).Reboot Into recovery [Obviously]
2).Select Wipe-AdvanceWipe-and select Dalvik,Cache,System,Data and Swipe the slider to wipe
3) Then Follow the Procedure i mentioned in video above
4).Then install Any Rom u want
Note:- This is not a permanent fix you have to follow the same procedure every time you want to install the ROM
THANKS To
XDA-Devs
@Sheref (for asking a Video Tut)
@GautamMaini (For Video and Thread)
Do Hit Thanks Button If I Helped It Encourages ME
Reserved Waiting For Video to Upload
Very helpful bro:good:
Bro I got a new method to solve that problem (not a permanently solution).
And now I can install any ROM.
Sheref said:
Bro I got a new method to solve that problem (not a permanently solution).
And now I can install any ROM.
Click to expand...
Click to collapse
What it is
Gautam Maini said:
What it is
Click to expand...
Click to collapse
I'm using old twrp 2.7..1...
Select wipe and select system and then select repair or change file system(something like that)and change the system partition ext4 to ext3 and wipe ,done .install ROM . now I flashed baiducloud os and it successfully installed and booted.
Sry for my bad English
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
aniket_anky said:
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
Click to expand...
Click to collapse
First Wipe system then restart recovery with no os installed. Then mount system and install rom !
Otherwise
Update to latest twrp
aniket_anky said:
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
Click to expand...
Click to collapse
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Thanks!!! You Are great
TheAndroidMods said:
Thanks!!! You Are great
Click to expand...
Click to collapse
Pleasure Helping
Sheref said:
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Click to expand...
Click to collapse
thanks bro u saved the day
aniket_anky said:
thanks bro u saved the day
Click to expand...
Click to collapse
Welcome bro. :good::laugh:
Thanks a Core!
Sheref said:
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Click to expand...
Click to collapse
Hey Sheref, your suggestion rocked.
First, I used Assayyed Kitchen for modifying Jelly Bean 4.1.2 of my Samsung Quattro GT-i8552. I made rom zips and flashed modified rom successfully after changing a few lines in updater-script.
Yesterday, I followed same method for Samsung Core GT-i8262. While flashing the rom, I got status 0 error. Then, I made almost 8 to 10 different rom zips with different alterations in updater-script; some copied from custom roms available for Core. Even after that I got status 0 error. I was highly frustrated with what was going on. I searched XDA for solution for updater-script errors and solutions etc. yesterday. But, I could not get one. Today morning, again I started my search on XDA and your post wished me Good Morning . Finally, I could flash / install modified Jelly Bean 4.1.2 on Core GT-i8262 (rooted, busy box, init.d, deodexed, debloated 84 apps) via odin. Breakthrough!
For Core 28bit .tar file worked; 32bit did not. Any idea why? Because as per my knowledge Quattro and Core are 32bit devices. Please correct me if I am wrong.
Thanks a Core
zooperaj said:
Hey Sheref, your suggestion rocked.
First, I used Assayyed Kitchen for modifying Jelly Bean 4.1.2 of my Samsung Quattro GT-i8552. I made rom zips and flashed modified rom successfully after changing a few lines in updater-script.
Yesterday, I followed same method for Samsung Core GT-i8262. While flashing the rom, I got status 0 error. Then, I made almost 8 to 10 different rom zips with different alterations in updater-script; some copied from custom roms available for Core. Even after that I got status 0 error. I was highly frustrated with what was going on. I searched XDA for solution for updater-script errors and solutions etc. yesterday. But, I could not get one. Today morning, again I started my search on XDA and your post wished me Good Morning . Finally, I could flash / install modified Jelly Bean 4.1.2 on Core GT-i8262 (rooted, busy box, init.d, deodexed, debloated 84 apps) via odin. Breakthrough!
For Core 28bit .tar file worked; 32bit did not. Any idea why? Because as per my knowledge Quattro and Core are 32bit devices. Please correct me if I am wrong.
Thanks a Core
Click to expand...
Click to collapse
Thanks bro.
32bit also not worked for me , idk why. Thanks for trying it. :angel: :angel::angel::angel:
hello, i want to repartition system partition of my galaxy core i8262,any help?
current system partition = 1.25 gb but i want above 1.80 gb or equal to 1.80 gb .
[email protected] said:
hello, i want to repartition system partition of my galaxy core i8262,any help?
current system partition = 1.25 gb but i want above 1.80 gb or equal to 1.80 gb .
Click to expand...
Click to collapse
Don't mess
Gautam Maini said:
Don't mess
Click to expand...
Click to collapse
you mean its impossible to do so
[email protected] said:
you mean its impossible to do so
Click to expand...
Click to collapse
Yes you can say . Repartition can lead to derious damage

Categories

Resources