Wifi cannot turn on - try all method recommended but not fixed - Moto G Q&A, Help & Troubleshooting

My phone moto G was rooted. Install TWRP Recovery.
I flash this Rom: http://forum.xda-developers.com/moto-g/development/rom-mahdi-rom-2-7-t2845749
I aslso flash CM 11 rom for moto G before. Same issue: WIFI CANNOT TURN ON.
The only Rom that wifi works is this one: http://forum.xda-developers.com/showthread.php?t=2752858
PLEASE HELP !!!
Screen Record: https://www.youtube.com/watch?v=J-LnaXULmOo

20111161 said:
My phone moto G was rooted. Install TWRP Recovery.
I flash this Rom: http://forum.xda-developers.com/moto-g/development/rom-mahdi-rom-2-7-t2845749
I aslso flash CM 11 rom for moto G before. Same issue: WIFI CANNOT TURN ON.
The only Rom that wifi works is this one: http://forum.xda-developers.com/showthread.php?t=2752858
PLEASE HELP !!!
Screen Record: https://www.youtube.com/watch?v=J-LnaXULmOo
Click to expand...
Click to collapse
You should post in Moto G forum and not Omni. Some users have reported Wi-Fi issues and said that flashing Experience Kernel after flashing ROM fixed it, you will also need to flash old camera libs from Experience thread as well.

RESOLVED
PROBLEM RESOLVED:
So the reason is the 'persist' folder (located in root folder) missing a bin file named "WCNSS_qcom_wlan_factory_nv.bin"
Simply download it from here: http://forum.xda-developers.com/showthread.php?t=2619553 and put it into persist folder. Restart. And it works perfectly!!!

Related

Wifi cannot turn on - try all method recommended but not fixed

My phone moto G was rooted. Install TWRP Recovery.
I flash this Rom: http://forum.xda-developers.com/moto-g/development/rom-mahdi-rom-2-7-t2845749
I aslso flash CM 11 rom for moto G before. Same issue: WIFI CANNOT TURN ON.
The only Rom that wifi works is this one: http://forum.xda-developers.com/showthread.php?t=2752858
PLEASE HELP !!!
Screen record: https://www.youtube.com/watch?v=J-LnaXULmOo
Did you use custom kernel?
Try omni rom
Sent from my XT1032

[ROM] Official Cyanogenmod 12 Installing Guide

CM12 Official!​
Guys those who have flashed Official CM12 on XT1033 couldnt get signal in it.
Problem can be solved By The following steps:
Convert the XT1033 to GPe 4.4.2(Not 4.4.4) Click Here to know how to do that.
Flash the latest TWRP recovery. Please dont use Colockworkmod recovery, it didnt work for me.. Link is here
Flash the latest CM12 from Here
Flash the Lollipop gapps from Here
Flash Donkey kernel from Here (This is required to get a signal)
Reboot and enjoy!!​
All the above files are not mine!!
The above process worked for my XT1033 Asia Moto G
Am not responsible for anything that happens to your phone. Use at your risk.

[Q] Bricked Moto G XT1033 with no OS and Don't know what to do

Guys , i am a newbie but i have a major problem.
i was in the process of rooting my moto g but wrongly erased my whole operating.
so i looked up a method to restore to stock [ was running 5.0.2 ] but after flashing recovery and boot image, i couldn't flash system.img and i also deleted a line from the xml following a RSD lite guide.
would you guys help me get the phone running .
i do have the lollipop update official zip .
and i can't even switch of my phone
jacob
Hi,
Thanks for using XDA Assist Please Standby when we move your post here Moto G Help and Troubleshooting
Good Luck!
Did you try manually flashing each partition using fastboot commands?
answer
jacobjake said:
Guys , i am a newbie but i have a major problem.
i was in the process of rooting my moto g but wrongly erased my whole operating.
so i looked up a method to restore to stock [ was running 5.0.2 ] but after flashing recovery and boot image, i couldn't flash system.img and i also deleted a line from the xml following a RSD lite guide.
would you guys help me get the phone running .
i do have the lollipop update official zip .
and i can't even switch of my phone
jacob
Click to expand...
Click to collapse
go on youtube type in how to adb sideload a rom on moto g that video will fix your problem well it did for me GoodLuck
Is recovery installed? Are the Moto drivers installed on your pc?
I've been through something similar before and whenever I accidentally wipe the OS, I just connect then flash another rom usually starting from here http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688 and it will pop up under "my computer" where you can copy and try to flash your rom again. I assume it's the same with 5.0+ (I'm still on 4.4)
Which method did you use to flash lollipop?

Moto g 4g XT1040 ( can not get root accesos)

Hi, please I would like to install a ROM in my moto g 4g xt1040. Once I tried to install slim kat and it worked good. I used twrp recovery with my device rooted to flash slimkat ROM... Then I notice that there was a ROM , cyanogen mod 12, and I tried to flash it as I did with slimkat. But I did something wrong because it booted normal, but the screen was flickering, and I had no signal. So I had to get back to stock ROM. I restore a stock rom i found here in moto g 4g section, then I installed twrp recovery again, but I could not root my phone anymore, there was a message ( root missing , do you wish to install root , or you will lose root. I tried to install cwm recovery , but it was the same. I think that the stock ROM I flashed to restore my phone is not okay. I can not flash any other ROM anymore.
Someone can help me please. Maybe I am doing something wrong. If someone need more information, just ask me.
Thanks a lot ( sorry for my english)( new a world of rooms)
Sent from my XT1040 using XDA Free mobile app
Hey, did you try re locking the bootloader and then unlocking it? And when you went to cm 12, why didn't you go back to slim kat?
Sent from my XT1064 using Tapatalk
Hello, I did not re locked the bootloader and locked it again. I have read something about update the bootloader, but I dont know exactly what to do first.
I didnt go back to slimkat because I have no signal for 3g ... When I set the APN a put all the necesary values for it, but when I put save it dessappered. The ROM didnt save the APN . that is why I tried CM 12, but my screen was flickering and I had no signal. The ROM didnt recognize me the sim card.
I tried to restore to stock my phone, and I installed stock brazil ROM( I am from Perú ), but after that I could not root my phone anymore.
I tried these roms for my moto g after installing stock brazil ROM with no root access.
CM12
SLIM 5.1
RESURECTION REMIX
PARANOID ANDROID.
all of them didnt boot or the screen flickered. In some cases there was a screen of " encryptation was not complete, restore to fábric and reboot" ( I think that is the message) .
If you can help me to install a ROM for my phone , or a stock ROM but with root.
Thank you
Sent from my XT1040 using XDA Free mobile app

Moto g XT1033 stuck in PA 5.1 Boot Screen.. Help please !

Hi all
In order to use a custom rom , I did the following with my moto g XT1033.
It was running on android 4.4.4 wen i did all these.
1. Unlocked bootloader and flashed twrp 2.8.7.0.
2. Downloaded the latest PA build from here "http://forum.xda-developers.com/showthread.php?t=2614690"
3. And downloaded pico gapps.
4. When i flashed the rom it told that the bootloader is out of date. So i updated the bootloader following this thread "http://forum.xda-developers.com/moto-g/general/falcon-bootloader-upgrader-tool-t3093793"
5. And when i flashed the rom it was flashed fine. And the gapps and supersu also.
But when i reboot it stucks in bootscreen. I tried wiping and flashing once again. It doesnt work. The bootloader and the recovery are remaining safe and good.
Shud i try a new different ROM or is there any problem with my procedure.. ???
The current bootloader version is 41.18. Moto g phones using 5.1.1 had bootloader version as 41.1A. Does this make a difference..?
Try another rom like aicp or euphoria
Hey my moto g3 cm 12.1 camera pictures taken with flash are black panorama pictures appear orange and slow mo is not working
deepakramji said:
The current bootloader version is 41.18. Moto g phones using 5.1.1 had bootloader version as 41.1A. Does this make a difference..?
Click to expand...
Click to collapse
No 41.18 is still fine (it also can be used for marshmallow ROMs e. g. CM 13 or CyanPop)!
deepakramji said:
Hi all
In order to use a custom rom , I did the following with my moto g XT1033.
It was running on android 4.4.4 wen i did all these.
1. Unlocked bootloader and flashed twrp 2.8.7.0.
2. Downloaded the latest PA build from here "http://forum.xda-developers.com/showthread.php?t=2614690"
3. And downloaded pico gapps.
4. When i flashed the rom it told that the bootloader is out of date. So i updated the bootloader following this thread "http://forum.xda-developers.com/moto-g/general/falcon-bootloader-upgrader-tool-t3093793"
5. And when i flashed the rom it was flashed fine. And the gapps and supersu also.
But when i reboot it stucks in bootscreen. I tried wiping and flashing once again. It doesnt work. The bootloader and the recovery are remaining safe and good.
Shud i try a new different ROM or is there any problem with my procedure.. ???
Click to expand...
Click to collapse
Did you root your device after you unlock your bootloader? Maybe you can try to flash supersu first then try to reflash rom and gapps.

Categories

Resources