Related
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
Go into recovery mode by first switching off your device. Then press volume up, down and power button all together to go into recovery when light flashes. Then you can try flashing stock rom and see what happens after that
OR
follow this guide
http://d-h.st/pt2
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
Hey Just Go to Recovery Mode Again and Do a Data Reset...
Thats all..
If you have bricked your phone you can flash it using sp flash tool with the stock rom.
hello everybody
sorry if have done anything wrong by starting or posting in wrong thread.......really apologies for that...
I have purchased micromax a110 and every thing was fine with that phone.i even flashed it to v2 ROM and things were fine even then(only problem i observed was with display having light faded up images of previous things displayed....don't know but feel may be due to screen refresh rate)
Yesterday i happened to find [MICROMAX A110] ROM of Mobistel Cynus T2 http://forum.xda-developers.com/showthread.php?t=2060482
did as things were mentioned in post and everything was good and smooth
i then thought of reverting back to V2 ROM and flashed A110 with Sp flash tool,flashed correctly and phone was running normally........but i saw the options in sp flash tool and selected memory test option and selected all options and started the test after test finished i was not able to start the phone........ i then again flashed with v2 ROM and it started but iam getting invalid imei and NVram warning as WiFi network please help me to resolve this ......phones working properly but shows imei invalid and WiFi network i tried to root but cant even root the phone now
I had the same probelm!!
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
ALL THE ABOVE METHODS DONT WORK!! I Bricked my phone to..so read on!!
Okay so here is what you have to do!!
1.Flash yourself into CWM recovery& create a backup of your file data as this method will erase everything!!
2.Enter into Advanced options>Mount SD card
3.Copy whichever ROM package you have pre-installed into the SD CARD which is mounted(In my case RADEON ROM*)
And now go to Install option from SD Card>Radeon Rom..and Voila its back from the DEAD!!
P.S: Backup is 100%essential & I'm not liable if you do not backup your data using CWM
Cheers!!
mayur.3.92 said:
hello everybody
sorry if have done anything wrong by starting or posting in wrong thread.......really apologies for that...
I have purchased micromax a110 and every thing was fine with that phone.i even flashed it to v2 ROM and things were fine even then(only problem i observed was with display having light faded up images of previous things displayed....don't know but feel may be due to screen refresh rate)
Yesterday i happened to find [MICROMAX A110] ROM of Mobistel Cynus T2 http://forum.xda-developers.com/showthread.php?t=2060482
did as things were mentioned in post and everything was good and smooth
i then thought of reverting back to V2 ROM and flashed A110 with Sp flash tool,flashed correctly and phone was running normally........but i saw the options in sp flash tool and selected memory test option and selected all options and started the test after test finished i was not able to start the phone........ i then again flashed with v2 ROM and it started but iam getting invalid imei and NVram warning as WiFi network please help me to resolve this ......phones working properly but shows imei invalid and WiFi network i tried to root but cant even root the phone now
Click to expand...
Click to collapse
Write ur imei by own.. how plz visit dis linkandroidforums.com/a75-all-things-root/542716-how-unbrick-a75-if-bricked-using-recovery.html
Sent from my Cynus T2 using xda app-developers app
Thanx but what about no am error being showed up as open wifi network
plz help stuck at recoverymode
imridul said:
ALL THE ABOVE METHODS DONT WORK!! I Bricked my phone to..so read on!!
Okay so here is what you have to do!!
1.Flash yourself into CWM recovery& create a backup of your file data as this method will erase everything!!
2.Enter into Advanced options>Mount SD card
3.Copy whichever ROM package you have pre-installed into the SD CARD which is mounted(In my case RADEON ROM*)
And now go to Install option from SD Card>Radeon Rom..and Voila its back from the DEAD!!
P.S: Backup is 100%essential & I'm not liable if you do not backup your data using CWM
Cheers!!
Click to expand...
Click to collapse
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
saadderaiya said:
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
Click to expand...
Click to collapse
Flash the Stock V2 via the SP Tool.
http://forum.xda-developers.com/showthread.php?t=1982587 [TUT]MTK Android (Sp flash tool ) tutorial
http://forum.xda-developers.com/showthread.php?t=1960080 check the first post for the Stock V2 ROM
similar issue ,
Let me try what VipinKC says
un brick
ravee1010 said:
similar issue ,
Let me try what VipinKC says
Click to expand...
Click to collapse
install stock rom by sp flash tool you phone will return to normal link is in down
http://forum.xda-developers.com/showthread.php?t=2167244
vjdsivakumar said:
install stock rom by sp flash tool you phone will return to normal link is in down
http://forum.xda-developers.com/showthread.php?t=2167244
Click to expand...
Click to collapse
Yes done already!
I put stock JB
rooted it
and installed LEWA v4 by seshu .........it rocks
Now am bulk installing apps .......
nice
ravee1010 said:
Yes done already!
I put stock JB
rooted it
and installed LEWA v4 by seshu .........it rocks
Now am bulk installing apps .......
Click to expand...
Click to collapse
nice work enjoy
Bricked a110
Guyz, i recently installed CWM on my a110, but somhow while testing the features, i installed 12 mp patch and rebooted the phone. But it got stuck on the boot screen. And then i again went to CWM and done all this:
Fomat Data
Format System
Format Cache
And now its just hanged on to boot screen and am afraid that i have just done the biggest mistake.
Any help will be very thankful..
Plzz Reply Fast...
Similar but Different Problem
I may have a similar problem, big bros. Please check this thread. Sorry for bothering. I really need help.
http://forum.xda-developers.com/showthread.php?p=53004045
use
saadderaiya said:
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
Click to expand...
Click to collapse
SP tool and flash stock rom through sp tools
If u have nandroid backtup then restore it
Sent from my A250 SUVI ROM v16 AURA using XDA Premium 4 mobile app
Hi all,
I have a xolo a800 . i was able to root it when i got the phone using bin4ary root method as i had ICS on the phone.
However after updating the phone i am not able to rrot the phone using the same method. I do have the recovery image for the xolo a800 but i really dont know how to root the phone. i tried the SP tools method but my phone doesnt do anything after i do the write memory. i guess im missing out on the scattered file and also the hex values.
Can somebody please help me with a step by step method for rooting the xolo a800 with official jellybean update ( not ICS xolo a800).
Im eagerly waiting.
Thanking you in advance....plzzzzzzzzzz !!! :laugh::laugh::laugh:
kaustav.arsenal said:
Hi all,
I have a xolo a800 . i was able to root it when i got the phone using bin4ary root method as i had ICS on the phone.
However after updating the phone i am not able to rrot the phone using the same method. I do have the recovery image for the xolo a800 but i really dont know how to root the phone. i tried the SP tools method but my phone doesnt do anything after i do the write memory. i guess im missing out on the scattered file and also the hex values.
Can somebody please help me with a step by step method for rooting the xolo a800 with official jellybean update ( not ICS xolo a800).
Im eagerly waiting.
Thanking you in advance....plzzzzzzzzzz !!! :laugh::laugh::laugh:
Click to expand...
Click to collapse
Hey Kaustav,
Even i have the same problem and tried many websites and posted my problem and didn't get any answer from either of them even xda doesnt have the answer. Or may be no one is able to root the phone:crying:
Did u followed all steps in bina4root
Sent from my Micromax A50 using Tapatalk 2
Xolo a800 Jelly Bean Root
Hey Guys,
I cracked how to root xolo a800 jelly bean .
First download the cwm recovery from xda and download mt6577 scattering file. Now download sp flash tool and super user zip file from anywhere and follow the sp tool flashing process. After flashing the recovery through sp flash tool enter recovery \by holding power and vol up and flash the super user zip and you are done
:good::good::good::good:
Siddhartha9964 said:
Hey Guys,
I cracked how to root xolo a800 jelly bean .
First download the cwm recovery from xda and download mt6577 scattering file. Now download sp flash tool and super user zip file from anywhere and follow the sp tool flashing process. After flashing the recovery through sp flash tool enter recovery \by holding power and vol up and flash the super user zip and you are done
:good::good::good::good:
Click to expand...
Click to collapse
hey siddhartha,
i tried using the sp flash tools.. can you give me more details, lke whats the hex value and how do i get the scattered file???
please.... desparately awaiting for your reply..
thanks in advance.
kaustav
kaustav.arsenal said:
hey siddhartha,
i tried using the sp flash tools.. can you give me more details, lke whats the hex value and how do i get the scattered file???
please.... desparately awaiting for your reply..
thanks in advance.
kaustav
Click to expand...
Click to collapse
hey siddhartha... this time i was able to use the sp flash tool, however after flashing i get the green circle but then i cant get into recovery.. tried a lot... please, if you can send me screen shots or a step by step procedure of doing the same...
looking forward to hear from you...
kaustav.arsenal said:
hey siddhartha... this time i was able to use the sp flash tool, however after flashing i get the green circle but then i cant get into recovery.. tried a lot... please, if you can send me screen shots or a step by step procedure of doing the same...
looking forward to hear from you...
Click to expand...
Click to collapse
hey kaustav,
To get into recovery mode you have to hold power button and vol up button. And after you are in recovery mode you have to flash the super su zip that i had told you. It will flash and when rebooting the recovery will tell you that The rom will flash stock recovery if you want the stock recovery you press go back and if you want cwm recovery you press yes
Siddhartha9964 said:
hey kaustav,
To get into recovery mode you have to hold power button and vol up button. And after you are in recovery mode you have to flash the super su zip that i had told you. It will flash and when rebooting the recovery will tell you that The rom will flash stock recovery if you want the stock recovery you press go back and if you want cwm recovery you press yes
Click to expand...
Click to collapse
hey siddhartha,
i am able to get into the recovery mode. i have flashed the recovery for xolo a800 from the threads avao;able in XDA. , however after getting into the recovery mode i dont have any options.it shows me the recovery screen with an android symbol and an exclamation mark. this is exactly where i get stuck all the time. i do have stored the superuser zip file in my phone memory, however for me to flash the same i need to have options on the recovery screen, which is what im missing..
hope i am flashing the right recovery file... the one that i did was the stock recovery for xolo a800 in the xda threads.
Incase, im going wrong, can you please attach the recovery file for me to cross check....helplessly waiting.
And thank you indeed for your prompt and well explained response.:good::good:
kaustav.arsenal said:
hey siddhartha,
i am able to get into the recovery mode. i have flashed the recovery for xolo a800 from the threads avao;able in XDA. , however after getting into the recovery mode i dont have any options.it shows me the recovery screen with an android symbol and an exclamation mark. this is exactly where i get stuck all the time. i do have stored the superuser zip file in my phone memory, however for me to flash the same i need to have options on the recovery screen, which is what im missing..
hope i am flashing the right recovery file... the one that i did was the stock recovery for xolo a800 in the xda threads.
Incase, im going wrong, can you please attach the recovery file for me to cross check....helplessly waiting.
And thank you indeed for your prompt and well explained response.:good::good:
Click to expand...
Click to collapse
Kaustav,
[http://forum.xda-developers.com/attachment.php?attachmentid=1827332&d=1364045871] go to this address this is the cwm recovery flash this and root your device
Siddhartha9964 said:
Kaustav,
[http://forum.xda-developers.com/attachment.php?attachmentid=1827332&d=1364045871] go to this address this is the cwm recovery flash this and root your device
Click to expand...
Click to collapse
Hey siddhartha..
unable to access the link that you sent me. can you please e-maail it to me.. Please ... it would be of great help
and thanks again for your prompt and immediate reply
My e-mail address is [email protected]
ooops... sorry...I was able to access the link siddhartha.
Will falsh this and get back to you asap.
Thanks again... ur a Star.
Fingers crossed till then.
Siddhartha9964 said:
Kaustav,
[http://forum.xda-developers.com/attachment.php?attachmentid=1827332&d=1364045871] go to this address this is the cwm recovery flash this and root your device
Click to expand...
Click to collapse
hey siddhartha... can you please tell me the hex values when i am flashing the recovery file....plz...:cyclops:
Siddhartha9964 said:
Kaustav,
[http://forum.xda-developers.com/attachment.php?attachmentid=1827332&d=1364045871] go to this address this is the cwm recovery flash this and root your device
Click to expand...
Click to collapse
hey siddhartha... i was able to fl;ash the recovery file that u gave me... thumbs up for that... but after flashing that my phone doesnt start...
its stuck at the boot logo of xolo and bricked... do you have th stock rom for the phone... please help me as i dont have a phone right now.... !!!!
or is there any other way of unbricking the phone... plz....
:crying::crying::crying::crying:
kaustav.arsenal said:
hey siddhartha... i was able to fl;ash the recovery file that u gave me... thumbs up for that... but after flashing that my phone doesnt start...
its stuck at the boot logo of xolo and bricked... do you have th stock rom for the phone... please help me as i dont have a phone right now.... !!!!
or is there any other way of unbricking the phone... plz....
:crying::crying::crying::crying:
Click to expand...
Click to collapse
Hey Kaustav,
This is the link for the ICS rom not Jelly Bean. http://199.91.154.149/zuw8tcd4stlg/jids8830gbn7t1q/xolo_a800_s109_20130121.zip if you want Jelly Bean go to http://www.xolo.in/xolocare/software-upgrade
Siddhartha9964 said:
Hey Kaustav,
This is the link for the ICS rom not Jelly Bean. http://199.91.154.149/zuw8tcd4stlg/jids8830gbn7t1q/xolo_a800_s109_20130121.zip if you want Jelly Bean go to http://www.xolo.in/xolocare/software-upgrade
Click to expand...
Click to collapse
hey siddhartha... the link for ICS doesnt work...it says that its an non validated account... do u have it uploaded anywhre else.. plz share it with me if u can...
Xolo A800 jellybean root
Siddhartha9964 said:
Hey Guys,
I cracked how to root xolo a800 jelly bean .
First download the cwm recovery from xda and download mt6577 scattering file. Now download sp flash tool and super user zip file from anywhere and follow the sp tool flashing process. After flashing the recovery through sp flash tool enter recovery \by holding power and vol up and flash the super user zip and you are done
:good::good::good::good:
Click to expand...
Click to collapse
Hey Siddhartha, I have got the CMW Recovery but I am ubable to find the mt6577 scattering file. Will you please give me the link or sent it in my email- [email protected]
thanks guys.... my xolo is rooted...
Sent from my XOLO_A800 using xda premium
how to root xolo a800 jelly bean
Siddhartha9964 said:
Hey Guys,
I cracked how to root xolo a800 jelly bean .
First download the cwm recovery from xda and download mt6577 scattering file. Now download sp flash tool and super user zip file from anywhere and follow the sp tool flashing process. After flashing the recovery through sp flash tool enter recovery \by holding power and vol up and flash the super user zip and you are done
:good::good::good::good:
Click to expand...
Click to collapse
Hello,
can you explain me how to root xolo a800 i am new and don't know anythink about how to root the phone but i want to root my phone.
Please also provide the links of drivers used while rooting the phone.
will this method work on xolo q600??
xolo 800
somebody please tag me a cwm for my xolo a800 . i want to root and flash a new rom .................
I have a rooted S-7500, with CWM recovery 5.0.2.8 installed. I (by mistake) allowed the 'software update' option to install a system update(or something) today by mistake (I know, you should never install system updates after rooting. My bad.) Since then, the phone directly goes to the cwm recovery mode on powering on, and i am unable to do anything else
I am not very well versed with the finer details of rooting bootloader recovery n all...so pls some details with steps...if possible .
Any help whatsoever...please I will be really grateful
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system
j.posarekar70 said:
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system
Click to expand...
Click to collapse
Thanks!!! It totally worked!
Just a clarification...now that i have got the stock rom back on my phone...am i right in saying that I have lost root access, my phone is totally back to the 'original' state, and i have lost CWM as well? Please correct me if I am wrong.
And assuming that I am correct(above), I would like to re-root my device(need to use proxydroid to surf internet over the damned proxy server!). So..can I follow the standard method, ie, can I do it the same way I had done before, or do i need to do something different now?
And once again...THANK YOU for your help! I had ended up hard bricking my previous phone, and was really scared when this happend to my aceP. You saved me!
Easy way to ROOT your SGAP
Yes by the time you flash stock rom you loss root even any custom recovery you flashed before...
but now if you want to root your SGAP again don't follow that guide again which you done before just follow this :
Download ODIN from Downloading link below (inside ODIN software folder)
Download any one recovery which you like TWRAP / CWM v5.5 (inside Custom recovery folder)
Download Root_SGAP.zip from Root folder & place that zip inside in your sd card
Click to expand...
Click to collapse
Download Link : GALAXY Ace Plus - Basic stuff
FOR Custom_Recovery :
Open odin, be sure your system has already install drivers & if kies is there close it.
extract recovery zip
connect device to pc in download mod (vol down + power + home) & select that (recovery) .md5 file in pda section inside ODIN software
Click start & wait to reboot device
FOR ROOT :
Now boot device in CWM mod ( vol up + down + power + home)
choose zip from sd card & select Root_SGAP.zip
DONE.
Click to expand...
Click to collapse
you've successfully ROOT & flash custom recovery on your device by just few simple steps
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
dubey.arpit said:
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
Click to expand...
Click to collapse
if you are going to stick on stock rom forever & only want to root device then stock recovery is ok for you...
but while dealing with custom roms, custom recoveries are smart choice.
it has lot of additional options than stock recovery.
so my opinion yes use custom recovery
Stuck in boot loop
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Snowflakes91 said:
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Click to expand...
Click to collapse
Check my guide on how to fix a bootloop in my sig
Question About Flashing A Stock ROM
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
cwm fixed
davidboca2000 said:
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
Click to expand...
Click to collapse
The new cwm by mb-14 is fixed and there are no more bootloops
Reply
bibhu60 said:
The new cwm by the wisp is fixed and there are no more bootloops
Click to expand...
Click to collapse
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Here it is..
davidboca2000 said:
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Click to expand...
Click to collapse
CWM 5.5.0.4 BY mb-14
I am also using this recovery from months i have flashed many roms and mods but it does not have any bugs.
Working perfectly...
Hit thanks if I helped You don't say it...
thanks
thanks for help
Hi all,
Question: I have a custom recovery right now and i would like to go back to unroot and factory settings, but for some reason it will not work.
I tried:
> Unroot/Uninstall SuperSU (option in SuperSU app), after waiting for 15 minutes, i got tired. Is it stuck?
> Fastboot and install original recovery. When i do this nothing happens when pressing VOL + POWER. There is no factory recovery, the phone just keeps rebooting.
> Factory reset. all data is lost, but EMUI is not the same as when i bought it (golden Mate 7 theme), but it looks more like Gingerbread stock Android.
Could someone help me to go back all the way to stock - like new? Many thanks in advance!
You download the original rom from huawei website for your version. Put the dload folder in the root of your sd card and then click on updater and then manual. It will see the folder and will start flashing.
Sent from my Coolpad 9976A using Tapatalk
@ mirchichamu: Thanks for the reply and good advice. This afternoon I already tried to flash the B127 update in the hope to go back to stock, but that did also not work with Custom Recovery (VOL+ and POWER) as I got an error.
Later I found out that the .img for the original recovery probably was not suitable for my Mate 7. I tried another stock recovery that i found online and that did the trick and I could factory reset in a normal way.
DGNL said:
@ mirchichamu: Thanks for the reply and good advice. This afternoon I already tried to flash the B127 update in the hope to go back to stock, but that did also not work with Custom Recovery (VOL+ and POWER) as I got an error.
Later I found out that the .img for the original recovery probably was not suitable for my Mate 7. I tried another stock recovery that i found online and that did the trick and I could factory reset in a normal way.
Click to expand...
Click to collapse
can you pls give me a link for this recovery you used?
first thing is to have THE RIGHT stock recovery version..
u cannot use custom recovery to have phone officially back as b4 or flash off. rom
It works always in sequence ...
If u want to flash new rom u need earlier recovery ..
if u want to re-flash same rom u use same recovery ..
here all recoveries : https://mega.co.nz/#!FxRTmLza!g2oX4WpdVzjkzHS8wm0WK5l4mJuxHpdf4VUzRiFjcVw
DGNL said:
@ mirchichamu: Thanks for the reply and good advice. This afternoon I already tried to flash the B127 update in the hope to go back to stock, but that did also not work with Custom Recovery (VOL+ and POWER) as I got an error.
Later I found out that the .img for the original recovery probably was not suitable for my Mate 7. I tried another stock recovery that i found online and that did the trick and I could factory reset in a normal way.
Click to expand...
Click to collapse
can u please help me out m stuck with the same thing i am trying to un root n get the stock rom i rooted my phone n rreset n i am stuck into sum different UI please tell me how to un root n get back to stock rom
I am on rooted 126 I want to restore it back like in root it too 127 which recovery should I use n how exactly should I do can u please help me out
Simona Simmy said:
first thing is to have THE RIGHT stock recovery version..
u cannot use custom recovery to have phone officially back as b4 or flash off. rom
It works always in sequence ...
If u want to flash new rom u need earlier recovery ..
if u want to re-flash same rom u use same recovery ..
here all recoveries : https://mega.co.nz/#!FxRTmLza!g2oX4WpdVzjkzHS8wm0WK5l4mJuxHpdf4VUzRiFjcVw
Click to expand...
Click to collapse
Hello. I download the zip file with the recoveries but the folder "B137SP03 stock recovery" is empty! Where I can find the stock recovery for B137SP03 ?
resolved :good:
What if I am using 2 sims
Hi guys. I have an tl10 with b324 on it. What stock recovery should i use? Im now jsing 2 sims and it seems slower and eat the battery faster. Wanna go back to stock and do a reset then upgrade latest version.
Sent from my HUAWEI MT7-TL10 using Tapatalk
Help needed urgently plzzzzzz!!!mt07 l09
HI
Recently bought Huawei Mate 7 and then rooted but never unlocked bootloader. I loaded a custom recovery CWM through apk Rashr and loaded custom firmware through apk. I then wanted to return to stock firmware but every time I try to flash through ADB I get error FAILED (remote: Command not allowed) and it does not flash. Tried to unlock via Huawei site but keep getting error and my card is not accepted for online transaction. Please help getting my bootloader unlock code this is my last option because nothing has worked. Huawei MT07-L09 details as follows
MT7-L09_V100R001C00B142SP05
CUSTC16D142SP05
Serial6Q7N15915002927
Imei:865276024320525
Product ID not known as fone is bricked
Any assistance will be appreciated
Q&A for PHILZ RECOVERY for SPICE MI509
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for PHILZ RECOVERY for SPICE MI509. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Not working...
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
epsan said:
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
Click to expand...
Click to collapse
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
saurabh1234 said:
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
Click to expand...
Click to collapse
Hey Thanks for reply, i resolved that issue by trying to turn on the phone by usb power, phone boots up normally but without any signal both sims are properly inserted but no signal (may be IMEI issue) how to resolve it???. ( procedure i followed for previous attempt, i am currently on JellyBean my stock android version(people say Mi509 come with KITKAT out of box but its not in case of my phone. i followed your procedure as it is, downloaded attachment and MobileUncle apk installed that apk , opened that uncle and selected recovery update and it automatically restarted.)
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
epsan said:
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
Click to expand...
Click to collapse
thats why i was asking about android version....
bcoz all roms and recovery available for MI509 uses KITKAT kernel and you flashed it on Jellybean...
here i attach the stock recovery of jellybean....
for fixing IMEI use this link.........
This will fix it permanently...
IMEI TOOL with video tutorial....https://docs.google.com/uc?id=0B5DM6ZSz3dh-eTQzV2VWck1Kckk&export=download
Database- http://www.mediafire.com/download/no1oo8rroq4uqtr/Database.rar
use database file from second link bcoz this database is for spice mi509....
and next time dont flash rom if you have jellybean
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
epsan said:
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
Click to expand...
Click to collapse
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
saurabh1234 said:
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
Click to expand...
Click to collapse
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
epsan said:
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
Click to expand...
Click to collapse
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
saurabh1234 said:
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
Click to expand...
Click to collapse
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
epsan said:
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
Click to expand...
Click to collapse
i am always here to help...
and now i am uploading my new ORIGINAL LOLLIPOP ROM CM12.1 ...
and links will be available in two three days...
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
subash.ateet said:
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
Click to expand...
Click to collapse
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
saurabh1234 said:
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
Click to expand...
Click to collapse
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
subash.ateet said:
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
Click to expand...
Click to collapse
flashtool will work on your pc and laptop...
download firmware and then install drivers given in it in your pc then open your flashtool and load bootloader...
now connect your device to pc via data cable with or without battery ...
then click on download button in flashtool and press vol down on device.
then update will start..
check this link...
http://forum.xda-developers.com/android/general/rooting-cwm-firmware-spice-stellar-mi-t2969920
Trying to port PhilZ 6.59.0
Can you tell me how you ported PhilZ 6.57.9.......coz i'm trying to port PhilZ 6.59.0