[Q] How to Unroot and go back to Factory Settings? - Ascend Mate 7 Q&A, Help & Troubleshooting

Hi all,
Question: I have a custom recovery right now and i would like to go back to unroot and factory settings, but for some reason it will not work.
I tried:
> Unroot/Uninstall SuperSU (option in SuperSU app), after waiting for 15 minutes, i got tired. Is it stuck?
> Fastboot and install original recovery. When i do this nothing happens when pressing VOL + POWER. There is no factory recovery, the phone just keeps rebooting.
> Factory reset. all data is lost, but EMUI is not the same as when i bought it (golden Mate 7 theme), but it looks more like Gingerbread stock Android.
Could someone help me to go back all the way to stock - like new? Many thanks in advance!

You download the original rom from huawei website for your version. Put the dload folder in the root of your sd card and then click on updater and then manual. It will see the folder and will start flashing.
Sent from my Coolpad 9976A using Tapatalk

@ mirchichamu: Thanks for the reply and good advice. This afternoon I already tried to flash the B127 update in the hope to go back to stock, but that did also not work with Custom Recovery (VOL+ and POWER) as I got an error.
Later I found out that the .img for the original recovery probably was not suitable for my Mate 7. I tried another stock recovery that i found online and that did the trick and I could factory reset in a normal way.

DGNL said:
@ mirchichamu: Thanks for the reply and good advice. This afternoon I already tried to flash the B127 update in the hope to go back to stock, but that did also not work with Custom Recovery (VOL+ and POWER) as I got an error.
Later I found out that the .img for the original recovery probably was not suitable for my Mate 7. I tried another stock recovery that i found online and that did the trick and I could factory reset in a normal way.
Click to expand...
Click to collapse
can you pls give me a link for this recovery you used?

first thing is to have THE RIGHT stock recovery version..
u cannot use custom recovery to have phone officially back as b4 or flash off. rom
It works always in sequence ...
If u want to flash new rom u need earlier recovery ..
if u want to re-flash same rom u use same recovery ..
here all recoveries : https://mega.co.nz/#!FxRTmLza!g2oX4WpdVzjkzHS8wm0WK5l4mJuxHpdf4VUzRiFjcVw

DGNL said:
@ mirchichamu: Thanks for the reply and good advice. This afternoon I already tried to flash the B127 update in the hope to go back to stock, but that did also not work with Custom Recovery (VOL+ and POWER) as I got an error.
Later I found out that the .img for the original recovery probably was not suitable for my Mate 7. I tried another stock recovery that i found online and that did the trick and I could factory reset in a normal way.
Click to expand...
Click to collapse
can u please help me out m stuck with the same thing i am trying to un root n get the stock rom i rooted my phone n rreset n i am stuck into sum different UI please tell me how to un root n get back to stock rom

I am on rooted 126 I want to restore it back like in root it too 127 which recovery should I use n how exactly should I do can u please help me out

Simona Simmy said:
first thing is to have THE RIGHT stock recovery version..
u cannot use custom recovery to have phone officially back as b4 or flash off. rom
It works always in sequence ...
If u want to flash new rom u need earlier recovery ..
if u want to re-flash same rom u use same recovery ..
here all recoveries : https://mega.co.nz/#!FxRTmLza!g2oX4WpdVzjkzHS8wm0WK5l4mJuxHpdf4VUzRiFjcVw
Click to expand...
Click to collapse
Hello. I download the zip file with the recoveries but the folder "B137SP03 stock recovery" is empty! Where I can find the stock recovery for B137SP03 ?

resolved :good:

What if I am using 2 sims

Hi guys. I have an tl10 with b324 on it. What stock recovery should i use? Im now jsing 2 sims and it seems slower and eat the battery faster. Wanna go back to stock and do a reset then upgrade latest version.
Sent from my HUAWEI MT7-TL10 using Tapatalk

Help needed urgently plzzzzzz!!!mt07 l09
HI
Recently bought Huawei Mate 7 and then rooted but never unlocked bootloader. I loaded a custom recovery CWM through apk Rashr and loaded custom firmware through apk. I then wanted to return to stock firmware but every time I try to flash through ADB I get error FAILED (remote: Command not allowed) and it does not flash. Tried to unlock via Huawei site but keep getting error and my card is not accepted for online transaction. Please help getting my bootloader unlock code this is my last option because nothing has worked. Huawei MT07-L09 details as follows
MT7-L09_V100R001C00B142SP05
CUSTC16D142SP05
Serial6Q7N15915002927
Imei:865276024320525
Product ID not known as fone is bricked
Any assistance will be appreciated

Related

Stuck on recovery screen.. Please Help!!

I was using Sense 5 rom and then suddenly my phone went in bootloop.. then i noticed that the volume down key was not working so i couldnt get into the recovery mode... then i took the phone to htc and they fixed the volume button problem and gave me back my phone still in bootloop...now when i go into the recovery mode the recovery logo appears and the phone gets stucks... its like bootloop but in recovery.. i have tried flashing other recoveries through fastboot but the problem is still there... Please help!!! I will be really thankful
Relocked? Maybe.
Taha.Fazal said:
then i took the phone to htc and they fixed the volume button problem and gave me back my phone still in bootloop.
Click to expand...
Click to collapse
There are chances that the HTC people locked it again. (They usually format whichever phone they get to lay hands on)
Try going through the rooting procedure again (starting from unlocking)
Taha.Fazal said:
I was using Sense 5 rom and then suddenly my phone went in bootloop.. then i noticed that the volume down key was not working so i couldnt get into the recovery mode... then i took the phone to htc and they fixed the volume button problem and gave me back my phone still in bootloop...now when i go into the recovery mode the recovery logo appears and the phone gets stucks... its like bootloop but in recovery.. i have tried flashing other recoveries through fastboot but the problem is still there... Please help!!! I will be really thankful
Click to expand...
Click to collapse
try rooting the phone again! I mean unlock the bootloader and then flash the recovery! If it doesnt work maybe then your phone has gone hardbrick well RIF BOX can easily solve this problem!
Need urgent help
i had rooted my pico months back and was on different custom roms......now i want 2 get back to the stock rom which i have downloaded Odexed Stock ROM Flashable Zip (With Link2SD Support)(Revision 3)(http://forum.xda-developers.com/show...4&postcount=76) and i have flashed this rom 5 - 10 times and everytime i reboot after flashing the rom..(i have an 8 gb class 4 sd card which has an 512 mb ext3/4 partition)...i am stuck on htc boot logo.....can u plssssss help
saadahmeddar said:
try rooting the phone again! I mean unlock the bootloader and then flash the recovery! If it doesnt work maybe then your phone has gone hardbrick well RIF BOX can easily solve this problem!
Click to expand...
Click to collapse
when I tried to unlock the bootloader again... at the end of the process when u have to confirm to unlock bootloader again... that screen did not appear.. but on command prompt everything seemed to go as it should have... .. dont knw what to do... and what is this riff box u spoke off... by searching it seemed more like a device and a complicate one...
Taha.Fazal said:
when I tried to unlock the bootloader again... at the end of the process when u have to confirm to unlock bootloader again... that screen did not appear.. but on command prompt everything seemed to go as it should have... .. dont knw what to do... and what is this riff box u spoke off... by searching it seemed more like a device and a complicate one...
Click to expand...
Click to collapse
well RIF Box is a universal flashing device. Bro your phone has been Hard-Bricked and RIF box can solve this problem
Try this
hitanshu.bachawat said:
i had rooted my pico months back and was on different custom roms......now i want 2 get back to the stock rom which i have downloaded Odexed Stock ROM Flashable Zip (With Link2SD Support)(Revision 3)(http://forum.xda-developers.com/show...4&postcount=76) and i have flashed this rom 5 - 10 times and everytime i reboot after flashing the rom..(i have an 8 gb class 4 sd card which has an 512 mb ext3/4 partition)...i am stuck on htc boot logo.....can u plssssss help
Click to expand...
Click to collapse
Hi hitanshu,
try to install a custom recovery and do a Clear Wipe of Cache and stuff
http://forum.xda-developers.com/show....php?t=2265055
or u need Different Recovery try this
http://forum.xda-developers.com/show....php?t=2168725
or TWRP too which ever u feel is good
the OP has mentioned how to Install the Recovery follow the same and do a Clean Wipe and Install the Stock HTC Rom from the below link based on ur region
http://forum.xda-developers.com/show....php?t=1569430
Enjoy
Please Hit Thanks If i have helped
saadahmeddar said:
well RIF Box is a universal flashing device. Bro your phone has been Hard-Bricked and RIF box can solve this problem
Click to expand...
Click to collapse
\do the mobile repairing stores in pakistan already have this and can fix this for me... or do i have to buy 1 myself??
Taha.Fazal said:
\do the mobile repairing stores in pakistan already have this and can fix this for me... or do i have to buy 1 myself??
Click to expand...
Click to collapse
yes they already have it. i live in Lahore and i know some of the shops who provide repairing facilities through this RIF Box.
saadahmeddar said:
yes they already have it. i live in Lahore and i know some of the shops who provide repairing facilities through this RIF Box.
Click to expand...
Click to collapse
could u suggest someone??
help me i accidentally deleted all my data , stock rom , customized rom etc
help me i accidentally deleted all my data , stock rom , customized rom etc now my htc explorer is not working... it only shows the bootloader screen help me run my htc again.
unfortunately wiped the recovery data as well :/
GARVIT.VINAYAK said:
help me i accidentally deleted all my data , stock rom , customized rom etc now my htc explorer is not working... it only shows the bootloader screen help me run my htc again.
unfortunately wiped the recovery data as well :/
Click to expand...
Click to collapse
Simple mate follow the procedure of putting recovery through fastboot you did after unlocking the bootloader..
Edit: Flash the recovery using fastboot through command prompt.. Then you will get the recovery again and install roms.

[q] asus padfone 2 (unrooted ) jelly bean 4.1 stock on asus boot logo ( help please

HI I NEED YOUR HELP PLEASE : I HAVE ASUS PADFONE 2 suddenly WHEN I WAS SEARCHING ON GOOGLE ITS SHOW ME ( unfortunately google app has stopped ) AND STOCK THERE SO I DID RESET AFTER THAT THE PHONE ITS STOCK ON BOOTING UP ASUS LOGO AND AFTER 15 MINT ITS PASS THE BOOT LOGO AND ITS SHOW ME ON THE TOP ( ENCRYPTION UNSUCCESSFUL ) AND ON THE BOTTOM ( RESET PHONE ) BUT WHEN I HIT ON RESET PHONE IT DOES NOT DOING ANYTHING THE PHONE ITS ( UNROOTED ) AND IT WAS RUNNING ANDROID JELLY JEAN ( 4.1) AND I CAN GET INTO STOCK RECOVERY AND I DID WIPE DATA/ FACTORY RESET AND WIPE CACHE PARTITION BUT STILL STOCK ON BOOT LOGO AND NOT BOOTING NORMALLY AFTER I USED ( ADB BOOT LOADER ) AND TRIED TO FLASH A NEW FIRMWARE BY USING ( CWM RECOVERY ) I DIDNT FLASH THE CWM RECOVERY JUST USED THE IMG RECOVERY TO FLASH THE FIRMWARE ( INSTALL ZIP FROM SIDELOAD ) AND I SENT THE FIRMWARE TO MY PHONE BUT THE CWM RECOVERY COULDN'T FLASH IT ( UNSUCCESSFUL ) BECAUSE CWM RECOVERY ITS GAVE ME EVERY TIME ( E: CANT MOUNT ) ANYTHING I DID WITH CWM RECOVERY IT DOES NOT WORK SO I NEED YOUR HELP GUYS PLEASE ANYBODY CAN HELP ME WITH THAT I WILL BE APPRECIATED AND THANK YOU PLEASE HELP NOTE : I DONT KNOW WHAT IS THE BUILD NUMBER ON MY PHONE BUT I BOUGHT IT FROM TAIWAN .... HEY GUYS CHECK THE PICS PLEASE WHICH I POSTED AND THANKS
What for a ROM and CWM Version have you using?
CWM6.0.2.9 goes not for the most ROMs! You must need CWM6.0.4.4 or higher, or TWRP-Recovery for Padfone 2!
Perhabs your Device can reactivatet by a new Firmware-Flash with CWM6.0.4.4 or TWRP!
Thank you so much for your replies
roselanguste said:
What for a ROM and CWM Version have you using?
CWM6.0.2.9 goes not for the most ROMs! You must need CWM6.0.4.4 or higher, or TWRP-Recovery for Padfone 2!
Perhabs your Device can reactivatet by a new Firmware-Flash with CWM6.0.4.4 or TWRP!
Click to expand...
Click to collapse
YES I WAS USED CWM:6.0.2.9 I TRIED OVER 20 TIMES WITHOUT ANY SUCCEED (UNSUCCESSFUL) AS SHOWN IN THE PICTURES WHICH I POSTED ALREADY I TRIED ALL THESE ROMS : TW_A68-11.8.4.12-0-ota-user.zip ,TW_A68-11.8.4.6-0-ota-user.zip,WW_A68-11.8.4.23-0-ota-user.zip,CHT_A68-11.8.3.3-0-ota-user.zip,CN_A68-10.4.17.7-0-ota-user.zip,HK_A68-10.4.17.7-0-ota-user.zip,TW_A68-11.8.4.23-0-ota-user.zip ,,, I TRIED ALL THESE ROMS BECAUSE I DONT KNOW WHAT IT WAS MY ( BUILD NUMBER ) I CANT REMEMBER I JUST KNOW IT WAS JELLY BEAN 4.1 AND MY PADFONE 2 MODEL A68 IT WAS NOT ROOTED IT HAS STUCK FIRMWARE AND HAS ( LOCKED BOOTLOADER ) AND I TRIED TOO : adb push firmware.zip /data/media for example :adb push TW_A68-11.8.4.23-0-ota-user.zip /data/media and i pushed already to my external storage because there is no memory card on this phone (sdcard) using the stock recovery and when i tried to install the update from the /data/media it shows : install update and after 15 mint it gave me installation aborted and i wanna tell you something else the CWM RECOVERY WHEN I USED IT I DIDNT FLASH IT I JUST BOOT LIKE TESTED :fastboot boot recover.img because i dont know if i can flash it or not because my phone its ( not rooted ) please i need your help and thank you so much and if you need more information just let me know because maybe i forgot something just let me know and thanks
false national rom!
I think you have Flash the fals national Rom! TW = Taiwan-ROM, CHT = China-ROM, WW = Worldwide-English, and so on! Thats named SKU Version of the ROM! When your padfone from Europa or USA than you need a WW or WWE ROM! It gives a thread on XDA for flashing other,false,back SKU on Padfones! Search that thread, there a tuturials for Changing or Flash back SKUs! Your device need a Flash back to his original SKU-Version of your ROM!
And for CWM your padfone must be unlocked! But thats simple! On Asus Homepage search your device, and than you can Download a Unlock-APK! Download and install thies apk on your padfone, and start it, than your bootloader is unlocked! And after that, you can install CWM or TWRP on several ways!
roselanguste said:
I think you have Flash the fals national Rom! TW = Taiwan-ROM, CHT = China-ROM, WW = Worldwide-English, and so on! Thats named SKU Version of the ROM! When your padfone from Europa or USA than you need a WW or WWE ROM! It gives a thread on XDA for flashing other,false,back SKU on Padfones! Search that thread, there a tuturials for Changing or Flash back SKUs! Your device need a Flash back to his original SKU-Version of your ROM!
And for CWM your padfone must be unlocked! But thats simple! On Asus Homepage search your device, and than you can Download a Unlock-APK! Download and install thies apk on your padfone, and start it, than your bootloader is unlocked! And after that, you can install CWM or TWRP on several ways!
Click to expand...
Click to collapse
i dont know what is the fals natinoal rom ? and i bought my phone from taiwan ? and i dont know what is my build version i cant remember ? and how i can unlock the bootloader and my phone its not booting up normally ? can you tell me what i have to do please step by step and thank you so much
Build-Number is not important!
May be i can help you! Can you start the device in CWM-Mode? Can you go in CWM? In case that you can, load a TW-ROM (TW=Taiwan) via ADB-Sideload over CWM to your device! Than the device should install the original TW-ROM automaticaly!
In case that CWM not Functional, try to turn off the device, wait 30-seconds, than hold the ``+`` (Plus) button on the side of the device, and turn on the device where you hold the ``+`` (Plus) button permanently! Yet should come the ASUS-Logo and in the Top of the Display should stand ``Fastboot-Mode``! Can you please try that, and say me what the device do!?
roselanguste said:
Build-Number is not important!
May be i can help you! Can you start the device in CWM-Mode? Can you go in CWM? In case that you can, load a TW-ROM (TW=Taiwan) via ADB-Sideload over CWM to your device! Than the device should install the original TW-ROM automaticaly!
In case that CWM not Functional, try to turn off the device, wait 30-seconds, than hold the ``+`` (Plus) button on the side of the device, and turn on the device where you hold the ``+`` (Plus) button permanently! Yet should come the ASUS-Logo and in the Top of the Display should stand ``Fastboot-Mode``! Can you please try that, and say me what the device do!?
Click to expand...
Click to collapse
I TRIED ALL THE TW : ROMS WHICH I SENT IT TO YOU ALREADY ABOVE AND I DOWNLOAD THESE ROMS FROM ASUS WEBSITE FIRMWARES ,, AND I SENT THE ROMS USING THE SIDELOAD TO MY PHONE AND IM NOT FLASHING THE CWM ON MY PHONE BECUSE MY PHONE ITS NOT ROOTED AND THE BOOTLOADER ITS LOCKED I JUST LET CWM TO BOOT ON MY PHONE NOT FLASH IT AND WHEN I TRIED TO INSTALL THE UPDATE USING CWM ITS GAVE ME ( INSTALLATION ABORTED ) STATUS 7 ERROR ,,,, check the pics please and thanks
Ok! I think it is the old CWM6.0.2.9 problem, this version of CWM has problems with flashing ROMs! BUT, there is one ROM on XDA for Padfone2 that must flash with CWM6.0.2.9! It is Tari's Padfone2 Custom ROM+Kernel! It is easy to find on XDA, and this ROM will flashing over Sideload with CWM6.0.2.9! Search on XDA for Tari's Padfone2 ROM, there you can Download the files, and there is also a step by step tuturial, follow that, and try!
And have you tested that Fastboot goes?
roselanguste said:
Ok! I think it is the old CWM6.0.2.9 problem, this version of CWM has problems with flashing ROMs! BUT, there is one ROM on XDA for Padfone2 that must flash with CWM6.0.2.9! It is Tari's Padfone2 Custom ROM+Kernel! It is easy to find on XDA, and this ROM will flashing over Sideload with CWM6.0.2.9! Search on XDA for Tari's Padfone2 ROM, there you can Download the files, and there is also a step by step tuturial, follow that, and try!
And have you tested that Fastboot goes?
Click to expand...
Click to collapse
yes i used cwm 6.0.29 ,, ok but you said taris padfone 2 rom its custom rom how am gonna flash it and my phone its not rooted and the bootloader on my phone its locked
wasim74 said:
yes i used cwm 6.0.29 ,, ok but you said taris padfone 2 rom its custom rom how am gonna flash it and my phone its not rooted and the bootloader on my phone its locked
Click to expand...
Click to collapse
yes i tried fastboot and sideload i have no problem with that i can send the roms to my phone but the problem my phone cant flash it ?
OK! But i think your Bootloader is Open, than otherwise, you cant go in Fastbootmode or CWM!? Fastbootmode and CWM (Recovery), that is the Bootloader!
You can go in CWM, then you can make the flash-prozedure of all ROMs! (Stock and Custom)!
Try Taris ROM! Go in CWM, make Wipe Data/Factory Reset, make Wipe Cache, and Sideload Taris ROM!
Did that not work, try CWM6.0.4.4 or TWRP-Recovery to Flash Original ASUS-TW-Firmware!
And when you can start CWM with - fastboot boot recovery.img - , than normaly you can also Flash it permanently with - fastboot flash recovery recovery.img - !
roselanguste said:
OK! But i think your Bootloader is Open, than otherwise, you cant go in Fastbootmode or CWM!? Fastbootmode and CWM (Recovery), that is the Bootloader!
You can go in CWM, then you can make the flash-prozedure of all ROMs! (Stock and Custom)!
Try Taris ROM! Go in CWM, make Wipe Data/Factory Reset, make Wipe Cache, and Sideload Taris ROM!
Did that not work, try CWM6.0.4.4 or TWRP-Recovery to Flash Original ASUS-TW-Firmware!
And when you can start CWM with - fastboot boot recovery.img - , than normaly you can also Flash it permanently with - fastboot flash recovery recovery.img - !
Click to expand...
Click to collapse
but i didnt unlock the bootloader on my phone how come its unlock i dont know ? so you mean i have to flash the cwm on my phone after that send one of the TW-ROMS to my phone and flash it too ,,, ok i will try that but from where i can get the cwm6.0.4.4 for padfone2 let me know please and thank you so much because you are help me with that ?
wasim74 said:
but i didnt unlock the bootloader on my phone how come its unlock i dont know ? so you mean i have to flash the cwm on my phone after that send one of the TW-ROMS to my phone and flash it too ,,, ok i will try that but from where i can get the cwm6.0.4.4 for padfone2 let me know please and thank you so much because you are help me with that ?
Click to expand...
Click to collapse
oh ,, just to let you know when i used the cwm 6.0.2.9 i cant do wipe -factory reset or wipe cashe its gave me e: cnt mount but on stock recovery i can do wipe cashe and factory reset but it take too long to do that
There is a other custom ROM for Padfone2 from Sissidroid! Search on XDA for - Guerilla ROM - it is easy to find, and in the thread to this ROM there is a link for Download CWM6.0.4.4. Because CWM6.0.4.4 is needed to Flash Guerilla-ROM from Sissidroid!
In Google search - TWRP for Padfone2 - then you find a TWRP-Site, from there you can Download TWRP-Recoverys for Padfone2. Take the Version 2.6.3.0 of TWRP, not other. The other Versions dont go! TWRP is a Recovery like CWM, but TWRP has a Touch-Interface, and the funtionality is often better than CWM!
roselanguste said:
There is a other custom ROM for Padfone2 from Sissidroid! Search on XDA for - Guerilla ROM - it is easy to find, and in the thread to this ROM there is a link for Download CWM6.0.4.4. Because CWM6.0.4.4 is needed to Flash Guerilla-ROM from Sissidroid!
In Google search - TWRP for Padfone2 - then you find a TWRP-Site, from there you can Download TWRP-Recoverys for Padfone2. Take the Version 2.6.3.0 of TWRP, not other. The other Versions dont go! TWRP is a Recovery like CWM, but TWRP has a Touch-Interface, and the funtionality is often better than CWM!
Click to expand...
Click to collapse
ok am gonna look for cwm6.0.44 and for twrp 2.6.3.0 and flash one of them on my phone not just like how i was did i mean just boot it and after that flash one of the roms which you told me about them already but just to remind you my phone its not rooted is that fine ... let me know and thank you so much my friend
The Root is here not so important. In most cases a ROM-Flash Unrooting the device! Every Time when i Flash a ROM, the device is after the Flash unrooted, and i must it Root again! Root is important for a Running System! And it gives a way to Root the Device over ADB/Fastboot, but i dont know how. But i have never Need a Root for ROM-Flash!
wasim74 said:
ok am gonna look for cwm6.0.44 and for twrp 2.6.3.0 and flash one of them on my phone not just like how i was did i mean just boot it and after that flash one of the roms which you told me about them already but just to remind you my phone its not rooted is that fine ... let me know and thank you so much my friend
Click to expand...
Click to collapse
sorry my friend : i mean my padfone 2 its not have root its ( unrooted ) so can i flash the custom recovery cwm or twrp on my phone and flash custom roms without having root on my padfone 2 ,,,,,, can i do that without root or i cant ? and thanks
Yes, you can do that without root! Important for that is only you can go in Fastbootmode and CWM/TWRP!
roselanguste said:
Yes, you can do that without root! Important for that is only you can go in Fastbootmode and CWM/TWRP!
Click to expand...
Click to collapse
hi my friend : i have problem with flashing the recovery { fastboot flash recovery recovery.img } i dont know why and i tried to just boot the recovery img for test : fastboot boot boot recovery.img i tried it with twrp and its show me just the picture TEAM WIN BUT ITS NOT FUNCTIONAL CHECK THE PICS PLEASE AND LET ME KNOW WHAT IS THE PROBLEM AND THANKS
On the pics i see, that recovery-flash was failure! In your CMD-pic, adb gives you a writing-failure! That can happen, when you try it ones! Try it again, and also with cwm! What for twrp version have you try? By right flashing, cmd gives you a sending recovery ok, and writing recovery ok! You have sending ok, but writing a failure!?
And what for adb/fastboot binarys use you?
P.s.: I have a important question, as you tryed to flash Asus Firmwares, have you unzip the Firmware before flashing? Or just Download and Flash how it is!

[Q] Back to stock recovery B137SP03 without recovery image

Hello all,
I have been going slightly mad today trying to get my mate 7 2GB back from CWM to stock recovery. The main problem is that I do not have a stock recovery image. But after being shown where to find one, I noticed that I could not get it successfully flashed either.
Since I do not really know how to do this, I used flashify, but that did not work and either returned me to the CWM or sent me to rescue.
Can someone help me to a) get a stock recovery image for the Mate 7 version MT7-L09 and b) show me how to properly flash it?
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
djzero86 said:
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
Click to expand...
Click to collapse
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
dekraan said:
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Click to expand...
Click to collapse
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
Ali_adel_medo said:
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
Click to expand...
Click to collapse
You have a unlocked bootloader???
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Ali_adel_medo said:
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Click to expand...
Click to collapse
Do you tried flash via fastboot ?
fastboot flash recovery recovery.img
Or try to use this tool
http://forum.xda-developers.com/mat...custom-recovery-tool-mt7-l10-l10-mt7-t3022424
This should work.
The fast boot just stucks at waiting for device
And the tool you send says that the stock recovery works only on tl_09 and my device is tl_10
djzero86 said:
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
You have a unlocked bootloader???
Click to expand...
Click to collapse
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
dekraan said:
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
Click to expand...
Click to collapse
Ok.... you have the stock recovery now???
djzero86 said:
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
Ok.... you have the stock recovery now???
Click to expand...
Click to collapse
I think so. If stock looks like I described: black screen, large EMUI logo, and the options reboot system now, wipe data/factory reset and wipe cache partition?
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
djzero86 said:
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
Click to expand...
Click to collapse
Great, thank you for your fantastic help!
I will get a new micro-sd card tomorrow, and will try it right away!
Good luck... come back to report
djzero86 said:
Good luck... come back to report
Click to expand...
Click to collapse
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
dekraan said:
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
Click to expand...
Click to collapse
Ok, I just reinstalled the B137P03 version from the how to install lollipop thread, and that went successful. Now going to try the update.zip! Keep you posted
Ah, now we're talking It seems to have worked. Phone is now showing 'Android is upgrading' and 'optimising app.....'
Great! It does seem strange I had to reinstall the B137SP03 rom, but that did the trick!

Help! NO OS installed/Need help flashing stock ROM to soft(?)-bricked S6 SM-G290F

So yesterday i done a pretty stupid thing of restarting my phone after I hid my SU binary using hide my root. This left what i think was a soft-brick as it was stuck on the samsung animation. I then stupidly enough got confused with my TWRP recovery menu and ended up wiping out my OS, leaving only the TWRP recovery on the phone. I then decided to download a 6.1.1 stock rom for my SM-G920F. When i tried flashing however, somehow ODIN froze and i made another stupid mistake of restarting my phone from download mode which resulted in the phone being froze on a screen saying " an error has occurred while updating the device software use the emergency recovery function s6 " cant provide an image as this is my first post, but please google the error message if you wish to see it
So i panicked thinking my phone was dead completely and surrendered, but today i managed to hook it up to TWRP and flashed the recovery. Now when i bootup i can access download mode and it boots straight to recovery. To make matters worse I began trying to download the original rom i recieved when i got the phone, however when i try flashing i get errors such as " SW rev, Check Fail: 'x' binary 'y' device "
(x and y vary for each stock rom i tried flashing.)
I have no way of finding out my firmware, bootloader info or anything. Is there ANY fix to this? I've made a huge mess of everything and I'm now desperate. Please, any advice would be a god-send. Thank you for withstanding this crappy post, I'm kind of a noob at xda.
EDIT 1- So I managed to install a custom ROM and kernal as i could transfer files while in TWRP for some reason but a new problem has showed up. So as of right now I have a custom rom installed which works, but when reboot my phone, TWRP is automatically opened after the initial samsung logo. I usually have to reflash my custom ROM (without wiping any data besides cache and dalvik) and the ROM installer will then reboot into the ROM, however this means when my phone turns off, my recovery is booted up instead of the ROM
I'm sensing some sort of Bootloader problem?
Metro221 said:
Now when i bootup i can access download mode and it boots straight to recovery.
Click to expand...
Click to collapse
First off i dont own an S6 (im still rocking the S4), but i have had some problems over the years but always managed to fix them in the end.
So while in Download mode are you not able to Flash Stock ROM (downloaded from samfirmware) via ODIN (following the instructions on the site)?
In TWRP are you not able to flash a custom ROM (probably with OTG cable if you dont have the ROM stored on the internal memory).
Any issues i have had i have always been able to do at least one of the above methods. If you cant do either or, im not sure what else i would try.
Thanks
Metro221 said:
So yesterday i done a pretty stupid thing of restarting my phone after I hid my SU binary using hide my root. This left what i think was a soft-brick as it was stuck on the samsung animation. I then stupidly enough got confused with my TWRP recovery menu and ended up wiping out my OS, leaving only the TWRP recovery on the phone. I then decided to download a 6.1.1 stock rom for my SM-G920F. When i tried flashing however, somehow ODIN froze and i made another stupid mistake of restarting my phone from download mode which resulted in the phone being froze on a screen saying " an error has occurred while updating the device software use the emergency recovery function s6 " cant provide an image as this is my first post, but please google the error message if you wish to see it
So i panicked thinking my phone was dead completely and surrendered, but today i managed to hook it up to TWRP and flashed the recovery. Now when i bootup i can access download mode and it boots straight to recovery. To make matters worse I began trying to download the original rom i recieved when i got the phone, however when i try flashing i get errors such as " SW rev, Check Fail: 'x' binary 'y' device "
(x and y vary for each stock rom i tried flashing.)
I have no way of finding out my firmware, bootloader info or anything. Is there ANY fix to this? I've made a huge mess of everything and I'm now desperate. Please, any advice would be a god-send. Thank you for withstanding this crappy post, I'm kind of a noob at xda.
Click to expand...
Click to collapse
If you boot in TWRP recovery it can be soved easily.
1)first try do wipe data and internal partition.And then try flashing stock firmware with odin(download proper file basing on ur model)
2)U may download a rom for ur model and flash using twrp.then if u want u can stay with the rom,i u dont u can try to flash again with odin after installing rom
Click :good: for my answer
Rremi said:
If you boot in TWRP recovery it can be soved easily.
1)first try do wipe data and internal partition.And then try flashing stock firmware with odin(download proper file basing on ur model)
2)U may download a rom for ur model and flash using twrp.then if u want u can stay with the rom,i u dont u can try to flash again with odin after installing rom
Click :good: for my answer
Click to expand...
Click to collapse
Yeah i managed to install a custom rom Tyrannus v 28.1, through TWRP, however, now I am experiencing a new problem, when i reboot - my phone boots up into TWRP instead of the ROM, more information in the edit i made in the post. THanks for all the continued help
Rremi said:
If you boot in TWRP recovery it can be soved easily.
1)first try do wipe data and internal partition.And then try flashing stock firmware with odin(download proper file basing on ur model)
2)U may download a rom for ur model and flash using twrp.then if u want u can stay with the rom,i u dont u can try to flash again with odin after installing rom
Click :good: for my answer
Click to expand...
Click to collapse
Waste of a post, but i wanted to say shqiptar, faleminderit. :*
Metro221 said:
Waste of a post, but i wanted to say shqiptar, faleminderit. :*
Click to expand...
Click to collapse
Ska gje.
Nga shqiperia je ?
Rremi said:
Ska gje.
Nga shqiperia je ?
Click to expand...
Click to collapse
Po po nga shqiperia.
But living in London ????
Would Samsung smart switch not help installing the stock rom?
Sent from my SM-G920F using Tapatalk
jr866gooner said:
Would Samsung smart switch not help installing the stock rom?
Click to expand...
Click to collapse
'Device not recognised' fixed it though. Flashed custom ROM with TWRP
Emergency recovery will and should help.

galaxy s6 g920F only booting in download mode

Hi guys,
got an s6 from a friend and trying to fix his problem. the phone only boots in dowbload mode. never rooted, and i tried flashing an official firmware through odin. Hidden.img doesn't flash so I extracted it blablabla flashed it the right way afterwards and passes but..no succes. I've done this before but this phone is a pain in the *ss! so I only get download mode. flashed stock recovery...no succes...
someone encountered this problem??
https://www.youtube.com/watch?v=WeSAQOYbWd0
follow the steps in the video tutorial exactly ! you will succeed
apaxtc said:
https://www.youtube.com/watch?v=WeSAQOYbWd0
follow the steps in the video tutorial exactly ! you will succeed
Click to expand...
Click to collapse
Hi,
Thanks for the help. Watched the video and follow his steps...
But now suddenly the hidden.img flashes on the phone.
So I get a green pass by Odin.
But phone doesn't start!
Tried "auto reboot" on and also off.
It doesn't fail anymore.
Deleted the hidden.img file and flashed it afterwards.
I can't get him alive. I'm gonna try other official firmwares with an older android version. I don't get it.... Why only download mode? Not even recovery opens. #notgivingup
should I try to root it with cf root and try to get a recovery mode on it? This phone needs to be wiped I guess.
try to get into recovery , and give general reset....
or try to install twrp -to install a custom rom...
does not make downgrade to android , it can break
apaxtc said:
https://www.youtube.com/watch?v=WeSAQOYbWd0
follow the steps in the video tutorial exactly ! you will succeed
Click to expand...
Click to collapse
apaxtc said:
try to get into recovery , and give general reset....
or try to install twrp -to install a custom rom...
does not make downgrade to android , it can break
Click to expand...
Click to collapse
I already tried flashing a downgraded firmware... So the phone is dead you think? I Wil give it some more tries today. Thanks for twrp... Don't I need to be rooted?
liobeir said:
I already tried flashing a downgraded firmware... So the phone is dead you think? I Wil give it some more tries today. Thanks for twrp... Don't I need to be rooted?
Click to expand...
Click to collapse
excuse me for delayed reply , it does not have to be root , (Enable USB debugging and OEM unlock ) but unfortunately you can not do it , but you can try if it works
apaxtc said:
excuse me for delayed reply , it does not have to be root , (Enable USB debugging and OEM unlock ) but unfortunately you can not do it , but you can try if it works
Click to expand...
Click to collapse
I really tried everything, this phone won't wake up again I guess...
Thanks for the help.
apaxtc said:
excuse me for delayed reply , it does not have to be root , (Enable USB debugging and OEM unlock ) but unfortunately you can not do it , but you can try if it works
Click to expand...
Click to collapse
Could it be that I super hard bricked this phone by flashing everything over and over? I always think, as long the phone boots in download mode you're pretty safe.
Can't flash twrp, stock recovery.....
No official firmware is booting the phone up. I used to have the hidden.img problem but nog every firmware flash completes but still doesn't boot the phone.
Is there an order in which I need to try to flash? Like, try firmware first, then a recovery,.... Or first a bootloader and modem, then a firmware...
Oh God help me!
Thanks for the replies I already got!
normal you should first bootloader ...after firmware
you tried that job ? https://forum.xda-developers.com/galaxy-s6/general/guide-repair-hard-bricked-devices-t3573865
apaxtc said:
normal you should first bootloader ...after firmware
you tried that job ? https://forum.xda-developers.com/galaxy-s6/general/guide-repair-hard-bricked-devices-t3573865
Click to expand...
Click to collapse
Wow that link is a whole lot of Chinese for me. but I'll look into it this weekend! Thanks for keeping up with me. My phone still boots in download so I'm a step ahead. Gonna try flashing stock firmware without auto-boot ticked in Odin, then reset and restart phone manually in download mode and try to flash right bootloader. Should I go for the latest firmware or more like a 6.0.1 firmware?
firmware 7. is to good , why use it 6. ?
"Wow that link is a whole lot of Chinese for me. " lol for me too
apaxtc said:
firmware 7. is to good , why use it 6. ?
"Wow that link is a whole lot of Chinese for me. " lol for me too
Click to expand...
Click to collapse
Well because I flashed like a couple of firmwares... And heard about downgrading is bad but... Yeah this isn't really downgrading.... Im just trying to wake up my friends phone. I will try to flash the latest firmware and then the bootloader right after it.
Hi guys,
So still no luck. Flashed latest stock firmware, tried flashing bootloader right after the successful flash, no luck. Tried rooting with cf-root, which completes but no custom recovery... Not booting. So yeah I'm on that download mode again. Anyone has some solutions I could try? Could I try converting a custom Rom zip to a tar file and flash it with Odin?
Thanks!
Hey guys
So I think i'm facing a similar problem on my s6 sm-g920f. When I flashed a stock rom 7.0 it passed with no errors, but when it tried to restart it just stays at Samsung logo. I too can't access recovery mode, only download mode. And when I try to do the "removing battery" method using volume down and power button it turns off but turns on right after and gets stuck on Samsung logo.
CrySomeMore said:
Hey guys
So I think i'm facing a similar problem on my s6 sm-g920f. When I flashed a stock rom 7.0 it passed with no errors, but when it tried to restart it just stays at Samsung logo. I too can't access recovery mode, only download mode. And when I try to do the "removing battery" method using volume down and power button it turns off but turns on right after and gets stuck on Samsung logo.
Click to expand...
Click to collapse
At least your phone is booting to the logo. I literally flashed everything! Recoveries, stock roms, tried rooting, bootloaders, stock rom with and without hidden.img...pit files.... if you find something... Let me know!
Huh am facing similar situation one s6 was in softbrick I I had odin mode successful but it showed G9280d, custom binary system official, I got a similar stock recovery then The device did boot to home screen but system wasnot stable everything stated crashing I did reboot that's when it could only stop at Android s6 then I did cross check to get it labled g920f flashing ends with either CM erorr or bootloader, in miracle it stopped at hidden or CM or pit in odin am clueless.
Man try holding V- ,home button and power key it will work just try harder. I faced it just today though mine is still.

Categories

Resources