Related
today i was using my phone normally.. it was working perfect
suddenly the phone hanged up and turned off
i tried to boot it and nothing happened
any suggestions ?!
thank u all
HTC sensation XE
Hboot :1.27
unlocked
kernel: bricked
Rom:ViperS 1.63
hack-zone said:
today i was using my phone normally.. it was working perfect
suddenly the phone hanged up and turned off
i tried to boot it and nothing happened
any suggestions ?!
thank u all
HTC sensation XE
Hboot :1.27
unlocked
kernel: bricked
Rom:ViperS 1.63
Click to expand...
Click to collapse
try to boot into bootloader
then select reboot
see how it goes
rzr86 said:
try to boot into bootloader
then select reboot
see how it goes
Click to expand...
Click to collapse
Can't reach the hboot :/
The phone is not turning on when pressing the power button
and when I plug it in the charge, the charging LED also is not turning on
Is the notification LED blinking? Try charging the battery with a universal charger.
hack-zone said:
Can't reach the hboot :/
The phone is not turning on when pressing the power button
and when I plug it in the charge, the charging LED also is not turning on
Click to expand...
Click to collapse
try charging the device without battery,sim and sdcard for 5-6 hours
then put them back and power on the device
if that fails too then
http://forum.xda-developers.com/showthread.php?t=1522351
rzr86 said:
try charging the device without battery,sim and sdcard for 5-6 hours
then put them back and power on the device
if that fails too then
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
buddy, I'd got this problem as well once, it won't work. If the LED is not blinking, according to ganeshp, it means a DEFINITE HARD BRICK.
so, I think THE ONLY way to solve it, is to use J-Tag (Or replace the mainboard, a little screwing off).
hope it gets alright.
ashkan-khatar said:
buddy, I'd got this problem as well once, it won't work. If the LED is not blinking, according to ganeshp, it means a DEFINITE HARD BRICK.
so, I think THE ONLY way to solve it, is to use J-Tag (Or replace the mainboard, a little screwing off).
hope it gets alright.
Click to expand...
Click to collapse
yeah i know mate but for some users the unbricking project helped too
if that fails then the last option is jtag
Thank u all for your help guys
hack-zone said:
Thank u all for your help guys
Click to expand...
Click to collapse
did you fix it with j-tag?
Sensation xe beat Not turing on
rzr86 said:
did you fix it with j-tag?
Click to expand...
Click to collapse
Device is showing up in device manager > com port
but no light is blinking and phone is not charging not turning on
BUT pc notifies with sound that usb device is connected and notifies with when unplugged. what to do? :crying:
farazi482 said:
Device is showing up in device manager > com port
but no light is blinking and phone is not charging not turning on
BUT pc notifies with sound that usb device is connected and notifies with when unplugged. what to do? :crying:
Click to expand...
Click to collapse
Hard brick, if you in US contact me, i do jtag service.
tomy1986.nt said:
Hard brick, if you in US contact me, i do jtag service.
Click to expand...
Click to collapse
I am outside US. can u fix it online?
farazi482 said:
Device is showing up in device manager > com port
but no light is blinking and phone is not charging not turning on
BUT pc notifies with sound that usb device is connected and notifies with when unplugged. what to do? :crying:
Click to expand...
Click to collapse
Sorry, Jtag can not do online.
@farazi482
Look here : http://mobiletechvideos.mybigcommerce.com/htc-sensation-4g-jtag-brick-repair/
These people do international business. I think you just need to pay the shipping though...
Sent from my HTC Sensation
deleted
farazi482 said:
Device is showing up in device manager > com port
but no light is blinking and phone is not charging not turning on
BUT pc notifies with sound that usb device is connected and notifies with when unplugged. what to do? :crying:
Click to expand...
Click to collapse
if you see your phone in device manager as QHSUSB_DLOAD or similar then it is bricked please go here to learn how to recover
Sensation Unbricking Project
And to the people who say if your phones LED no blinking it wont unbrick with Dexters unbrick project your wrong. 95% of the unbricked phones used in the unbricking project have NO blinking LED I did it to my old sensation when bricked going S-ON no LED only picked up in windows as stated above and fixed it on my linux machine
Usb detection problemm
KernelDev101 said:
if you see your phone in device manager as QHSUSB_DLOAD or similar then it is bricked please go here to learn how to recover
Sensation Unbricking Project
And to the people who say if your phones LED no blinking it wont unbrick with Dexters unbrick project your wrong. 95% of the unbricked phones used in the unbricking project have NO blinking LED I did it to my old sensation when bricked going S-ON no LED only picked up in windows as stated above and fixed it on my linux machine
Click to expand...
Click to collapse
Installed Ubuntu 12.04.. then it automatically installed 3 packages (dont know about that).. then extracted 32 bit files to Home
Problem: when i write ./brickdetect.sh in terminal it says "Device can't be detected. check connections.." although its correctly plugged in (without battery, sim, sd card)
any idea how to fix this issue?
farazi482 said:
Installed Ubuntu 12.04.. then it automatically installed 3 packages (dont know about that).. then extracted 32 bit files to Home
Problem: when i write ./brickdetect.sh in terminal it says "Device can't be detected. check connections.." although its correctly plugged in (without battery, sim, sd card)
any idea how to fix this issue?
Click to expand...
Click to collapse
plug your phone into linux and open terminal and type dmesg and send output on here
After countless of weeks trying to figure out what's wrong and how to fix it, I might as well ask help from the masters,
I bought this phone in a non-working condition and was only told it just needed charging.
Here's what I know about it so far:
Z560e
PJ40200
so it's an S3
the phone does not boot up
I cannot get into hboot
the phone shows an amber light when connected to a power source, so I'm assuming it's charging.
sometimes gets detected by the computer as qhsusb_dload but I can't seem to reproduce the condition that it does get detected.
I have taken the phone apart, connected it without the battery to see if qhsusb_dload is detected to no avail
I don't know how it got into this situation and haven't tried any of the methods to fix this as it might worsten the situation.
i have tried to get this checked by a local shop to get it jtagged but he failed and I'm not entirely sure if he put any effort it
I wanna know what's wrong with it and if or how I can fix it?
Any help would be greatly appreciated :highfive:
Is the mode displayed qhusb or qhusb_dload on PC?
it's displayed as qhsusb_dload.
what are the differences exactly? Just so I'd know so I could help out others.
Qhusb is totally bricked and can only be repaired with jtag. Normally qhusb happens by flashing wrong hoot, or recovery etc.
Qhusb_dload can be repaired with PC. Most of the time.
Did you used unlimited.io tool?
Ps I live in Germany, so I won't respond anymore today. Too late here .
wew, well that's a relief. :cyclops:
I haven't yet but I'll try unlimited.io's solution, see if that fixes it.
thanx for your time, it's 5am where I'm from right now and I'll keep working on this till i pass out. :victory:
update: tried unlimited.io's QHSUSB_DLOAD fix but to no avail either, any other suggestions?
No no. Don't try it . Oh damn... Now it's definitely bricked...
I asked if you used it not tried to use it.
Don't wanted you to use it.
hm.. so, what do I do now?
Replied on pm
ok.. so just charge it until Monday?
Yes
@tecardo
my one s s3 too is also bricked like agili, i tried to update to jellybean via OTA and the phone suddenly shutsdown. and now it is bricked. pls help me thanks
Still report back on Monday.
alright, monday is here. what's next?
I would need one of your One S. The reason i had you wait: The battery discharges in this state. If it's empty it's hard to repair.
So someone of you needs to check this: Run a RUU. When Phone is connected.
i ran the ruu, i get an error 170?
so uh, where do i send the phone?
also, would you like me remove the battery so it doesn't discharge on the way there? ill also have it disassembled to save you the trouble
same here tecardo, pls also tell me where i will send my phone im kinda desperate. thanks.
I only need 1 device to look if I can fix it
My HTC Sensation 4G was stuck in a bootloop but I could still access the bootloader (power+volume down), I took it 2 years ago to an HTC store but they gave it to me back worse than before, it was not turning on at all. I tried this week to follow this tutorial http://forum.xda-developers.com/showthread.php?t=1522351 (using the latest stable Ubuntu) for unbricking it but my device isn't detected using the ./brickdetect.sh command (I tried reading the notes concerning plugging it in a 2.0 usb port, with/without battery but nothing changed). However, when I plug it to my Windows, I see in the drivers qhsusb_dload
What can I do?? Please help.
Truepeace said:
My HTC Sensation 4G was stuck in a bootloop but I could still access the bootloader (power+volume down), I took it 2 years ago to an HTC store but they gave it to me back worse than before, it was not turning on at all. I tried this week to follow this tutorial http://forum.xda-developers.com/showthread.php?t=1522351 (using the latest stable Ubuntu) for unbricking it but my device isn't detected using the ./brickdetect.sh command (I tried reading the notes concerning plugging it in a 2.0 usb port, with/without battery but nothing changed). However, when I plug it to my Windows, I see in the drivers qhsusb_dload
What can I do?? Please help.
Click to expand...
Click to collapse
do you have access now to the bootloader?
Truepeace said:
My HTC Sensation 4G was stuck in a bootloop but I could still access the bootloader (power+volume down), I took it 2 years ago to an HTC store but they gave it to me back worse than before, it was not turning on at all. I tried this week to follow this tutorial http://forum.xda-developers.com/showthread.php?t=1522351 (using the latest stable Ubuntu) for unbricking it but my device isn't detected using the ./brickdetect.sh command (I tried reading the notes concerning plugging it in a 2.0 usb port, with/without battery but nothing changed). However, when I plug it to my Windows, I see in the drivers qhsusb_dload
What can I do?? Please help.
Click to expand...
Click to collapse
The unbricking is, as stated in the unbricking thread, only for bricked phones which were bricked by turning back to S-ON.
If it doesn't boot at all and you'll get it recognized only as qhsusb_dload it's hard bricked and most likely you won't be able to recover it.
May I ask why you didn't bring the phone to the store again when you got it back?
rzr86 said:
do you have access now to the bootloader?
Click to expand...
Click to collapse
No, I have no access to the bootloader, it is not turning on at all.
Sajito said:
The unbricking is, as stated in the unbricking thread, only for bricked phones which were bricked by turning back to S-ON.
If it doesn't boot at all and you'll get it recognized only as qhsusb_dload it's hard bricked and most likely you won't be able to recover it.
May I ask why you didn't bring the phone to the store again when you got it back?
Click to expand...
Click to collapse
Because they didn't know how to fix it, I gave it to them bootlooping and they gave it back not turning on at all
Truepeace said:
Because they didn't know how to fix it, I gave it to them bootlooping and they gave it back not turning on at all
Click to expand...
Click to collapse
your only solution
http://forum.xda-developers.com/showthread.php?t=2775115
rzr86 said:
your only solution
http://forum.xda-developers.com/showthread.php?t=2775115
Click to expand...
Click to collapse
Yeah I saw it too but I don't want to pay for it
Anyways thanks a lot for your help.
Hi there,
I accidentally flashed (inside twrp) my HTC m8 with a bootstack/modem of a different phone (39a,LG G2). I'm pretty embarrassed about it, didn't mean to do it...I thought I was following instructions to install a new rom for the m8,except I was in the wrong forum..
details: in TWRP I flashed the wrong file, then went on to install a new rom and an error appeared: this is not vs980, this device is m8wl...so I thought, what? strange....
I turned off the phone (without realizing yet what happened. Sorry, stressful couple of weeks) and when I tried to turn it back on, it wouldn't. No matter how long I held the power button, or power and vol down. It will not go in download mode, neither detect it is plugged in to charger or a computer. Basically totally off without any response.
My question: is there any way possible to resuscitate this phone? please help me! any advice is appreciated.
before I had the m8 with s-off,rooted,with a 5.1 rom installed.
Thank you in advance!!!
HTC m8
danielr324 said:
Hi there,
I accidentally flashed (inside twrp) my HTC m8 with a bootstack/modem of a different phone (39a,LG G2). I'm pretty embarrassed about it, didn't mean to do it...I thought I was following instructions to install a new rom for the m8,except I was in the wrong forum..
details: in TWRP I flashed the wrong file, then went on to install a new rom and an error appeared: this is not vs980, this device is m8wl...so I thought, what? strange....
I turned off the phone (without realizing yet what happened. Sorry, stressful couple of weeks) and when I tried to turn it back on, it wouldn't. No matter how long I held the power button, or power and vol down. It will not go in download mode, neither detect it is plugged in to charger or a computer. Basically totally off without any response.
My question: is there any way possible to resuscitate this phone? please help me! any advice is appreciated.
before I had the m8 with s-off,rooted,with a 5.1 rom installed.
Thank you in advance!!!
Click to expand...
Click to collapse
You need all in one kit 2.0
M8 firmwareTWRP or probably RUU file
my choice will be firmware TWRP
you can flash it with help of All in one tool kit 2.0
ok_then_so said:
You need all in one kit 2.0
M8 firmwareTWRP or probably RUU file
my choice will be firmware TWRP
you can flash it with help of All in one tool kit 2.0
Click to expand...
Click to collapse
No, a toolkit won't help. He needs a new phone.
Sent from my HTC6535LVW using Tapatalk
beaups said:
No, a toolkit won't help. He needs a new phone.
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
thanks for the help so far guys!
Here's another funny thing. After a few attempts of plugging it in to a computer, it was recognized and it showed up in the device manager. The phones still did not turn on though. Additionally it seems that the phone is seen as an LG model (even though it's not), but I am not sure yet. I will get the HTC drivers installed,and if it doesn't work, I will try the LG drivers.
by the way, isn't there a way to flash the correct modem/bootstack with ones of those kits? i also remember from downloading the wrong LG G2 modem/bootstack that it didn't come with fastboot in it.
I will try a few things and report it back.
thanks again,
danielr324 said:
thanks for the help so far guys!
Here's another funny thing. After a few attempts of plugging it in to a computer, it was recognized and it showed up in the device manager. The phones still did not turn on though. Additionally it seems that the phone is seen as an LG model (even though it's not), but I am not sure yet. I will get the HTC drivers installed,and if it doesn't work, I will try the LG drivers.
by the way, isn't there a way to flash the correct modem/bootstack with ones of those kits? i also remember from downloading the wrong LG G2 modem/bootstack that it didn't come with fastboot in it.
I will try a few things and report it back.
thanks again,
Click to expand...
Click to collapse
If your device doesn't light the power button but for a single flash when you try to power it on your board is toast.
If it shows up in device manager as a qusb bulk device the board is toast.
Sent from my HTC6535LVW using Tapatalk
dottat said:
If your device doesn't light the power button but for a single flash when you try to power it on your board is toast.
If it shows up in device manager as a qusb bulk device the board is toast.
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
I got it to be recognized on a computer again, and windows installs a driver. The name of the device is forge hs-usb qdloader 9008.
I tried the all in one 2.0 kit, adb sideload, etc but anything I try I get a "device not found".
I think I am giving up unless someone finds a way to unbrick this kind of severe problem in the future. I also researched a bit on google, and there's a way to unbrick the LG G2 when it's seen as forge hs-usb qdloader 9008, which is known as a board unbrick. I found nothing for the HTC m8 though.
We tried all we could Thanks all for the help, it's very much appreciated! You guys are the best and this forum is awesome. I also ordered a new phone...and I will root it too
dottat said:
If your device doesn't light the power button but for a single flash when you try to power it on your board is toast.
If it shows up in device manager as a qusb bulk device the board is toast.
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
Might be completely wrong on this.
Wouldn't he be able to JTAG the appropriate boot image back onto the device?
Also, I know we had a hard brick recovery for the S3 back in the day. Worked consistently on full hard brick's.
http://forum.xda-developers.com/showthread.php?t=2581166
Isn't it possible to dump a debrick image from a working device and follow the guide with that? I know the two devices are completely different, but the premise is the same.
My technical know-how isn't anywhere near your level, just thought I'd throw these ideas out there is case it hasn't been thought of yet. I'd be happy to put together a guide on how to do this if it can work on the M8.
BadUsername said:
Might be completely wrong on this.
Wouldn't he be able to JTAG the appropriate boot image back onto the device?
Also, I know we had a hard brick recovery for the S3 back in the day. Worked consistently on full hard brick's.
http://forum.xda-developers.com/showthread.php?t=2581166
Isn't it possible to dump a debrick image from a working device and follow the guide with that? I know the two devices are completely different, but the premise is the same.
My technical know-how isn't anywhere near your level, just thought I'd throw these ideas out there is case it hasn't been thought of yet. I'd be happy to put together a guide on how to do this if it can work on the M8.
Click to expand...
Click to collapse
Not likely with the nand used on this device.
Sent from my HTC6535LVW using Tapatalk
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
I am not able to post image. Help me. I don't have 10 post count yet.
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Agent_fabulous said:
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Click to expand...
Click to collapse
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
nik_123 said:
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
Click to expand...
Click to collapse
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Agent_fabulous said:
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Click to expand...
Click to collapse
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
nik_123 said:
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
Click to expand...
Click to collapse
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
stuckbootloader said:
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
Click to expand...
Click to collapse
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
nik_123 said:
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
Click to expand...
Click to collapse
I'm afraid I can't...
Agent_fabulous said:
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
Click to expand...
Click to collapse
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Agent_fabulous said:
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Click to expand...
Click to collapse
nope... even if we have a snapdragon... since this is a semcflash device a backup is useless...
Sent from my Xperia T using XDA Free mobile app
Hello sir,
I had the same problem a month ago and I fixed my bricked Xperia L.
Just go to this thread and follow the steps ^^
http://forum.xda-developers.com/showthread.php?t=2695344
The thread says u need to download WMSHUA, but its in chinese language. If you don't know what it means just reply to this and i will translate it.
Good luck!
If it didn't worked, or u need help reply.