I'm trying to get my HTC Sensation to boot one of the 4.4 CyanogenMod unsupported ROM's, and after going through several walkthroughs I found here, I realized I had to upgrade my firmware before I could do that. So I used the "fastboot oem lock" command and reloaded a stock ROM using an RUU process. Now I'm ready to load one of the new CM ROM's, but I can't flash any boot image until I unlock the bootloader again. I tried using the HTCDev process again using my original Unlock_code.bin as well as a newly generated Unlock_code.bin, but no luck. I feel like this is the last speed bump to get over. Here are the results of my "getvar all":
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: HT162T527781
(bootloader) imei: 355066041626260
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4182mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
When I go into the bootloader it currently says:
Code:
*** RELOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34
Any ideas of how I can unlock the bootloader long enough to flash a boot image? Any advice is much appreciated!
roswell1329 said:
I'm trying to get my HTC Sensation to boot one of the 4.4 CyanogenMod unsupported ROM's, and after going through several walkthroughs I found here, I realized I had to upgrade my firmware before I could do that. So I used the "fastboot oem lock" command and reloaded a stock ROM using an RUU process. Now I'm ready to load one of the new CM ROM's, but I can't flash any boot image until I unlock the bootloader again. I tried using the HTCDev process again using my original Unlock_code.bin as well as a newly generated Unlock_code.bin, but no luck. I feel like this is the last speed bump to get over. Here are the results of my "getvar all":
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: *************
(bootloader) imei: **********
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4182mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
When I go into the bootloader it currently says:
Code:
*** RELOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34
Any ideas of how I can unlock the bootloader long enough to flash a boot image? Any advice is much appreciated!
Click to expand...
Click to collapse
since you are on S-OFF flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
after that install a custom recovery and flash a custom rom from it
you don't need to flash the custom rom's boot.img because you are on S-OFF
by the way you could just flash 3.33 universal in first place and avoiding the ruu process
note:remove you imei and s/n
don't show them in public
rzr86 said:
since you are on S-OFF flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
after that install a custom recovery and flash a custom rom from it
you don't need to flash the custom rom's boot.img because you are on S-OFF
by the way you could just flash 3.33 universal in first place and avoiding the ruu process
note:remove you imei and s/n
don't show them in public
Click to expand...
Click to collapse
That was it! Thank you very much. It's running like a champ now.
Related
I found out that problem i was having with my touchscreen is hardware related, so I want to get my mobile phone back to full stock. I read so many things about installing RUU, flashing this, flashing that, hboot this that i'm totally lost going true 10+ topics. If anyone could help with some direct instructions, would own you big time.
Current rom: Cynagonmod9 (latest one)
Unlocked bootloader (htcdev)
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADION-3822.10.08.04_M
eMMC-boot
Anyone know what to do with my current setup to get stock ROM back? If you need any further info about my mobile let me know ... rather desperate at the moment!
My phone is waiting for exactly the same operation, with exactly the same problem. I just have to find some time.
I will try this. Have you found it?
http://forum.xda-developers.com/showthread.php?t=1318919
Okay so i tried the following things:
- Create a goldcard
- lock bootloader (fastboot oem lock)
- install RUU from fastboot (with the .exe)
I always get Error 140: wrong bootloader version I use latest Europe RUU
No matter what, the 140 error keeps returning. Here is some more info of my phone, if sombody could give me some more guidlines, really need them
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) serialno: SH1BWTJ02396
(bootloader) imei: 358967043591260
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4192mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
*UPDATE:
Got it fixed, had to change misc_version in the process
I have a T-Mobile HTC One and I am trying to get it updated to something other than stock. Right now I have CM 10.0.0 running but none of the gapps will work (all crashing and play store won't load - just says retry). I can't get any other roms to work. I think my main problem is that HBOOT is showing 1.14.005 and I have S-ON. I can't get any RUU program to work. They are all failing. I can ADB push and fastboot flash but nothing seems to work. I can't seem to find what I am missing. I just would like to get a complete working rom without the HTC stuff on it.
1. How do I get S-off?
2. how do I update Hboot?
3. are there any rims that will work with the old hboot that I can just flash right now that will work with all of the Google apps?
I just need this phone to last my daughter another 4 months. I thought I could just put a clean rom on this one and get her up and running. 2 days and 100 flashes and pushes and I am worse off than I was! I don't care what version of Android it is running as long as it is JB or higher.
Settings:
*** Unlocked ***
VLE PVT SHIP S-ON RL
HBOOT-1.14.0005
RADIO-1.13.50.05.25
OpenDSP-v29.1.0.45.0622
eMMC-boot
Nov 21 2012, 12:17:41
TWRP 2.8.1.1
Update: When I run RUU I get the From version of the ROM as =2.35.531.7 and it wants to use Image version: 1.84.531.2. It fails of course.
When I do Getvar I get the following:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.14.0005
(bootloader) version-baseband: 1.13.50.05.25
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.35.531.12
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3843mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 8be28a51
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I cannot get anything to run correctly. Any suggestions on what ROM to try that will work with this version? I just want it to boot and run with Google apps. Nothing fancy!
Any help is appreciated.
cyberpyr8 said:
Update: When I run RUU I get the From version of the ROM as =2.35.531.7 and it wants to use Image version: 1.84.531.2. It fails of course.
When I do Getvar I get the following:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.14.0005
(bootloader) version-baseband: 1.13.50.05.25
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.35.531.12
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3843mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 8be28a51
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I cannot get anything to run correctly. Any suggestions on what ROM to try that will work with this version? I just want it to boot and run with Google apps. Nothing fancy!
Any help is appreciated.
Click to expand...
Click to collapse
First you need to flash stock recovery, the you have to relock the bootloader. Once done you can flash the latest RUU or HBoot update. With updated HBoot you can unlock the bootloader again, flash TWRP and a custom rom.
Here you can find the stock recovery
and the latest RUUs (2nd post) --> LINK
Hi, I need some help going back to stock rom on my htc one s (s4).
I've read some places that I need an Ruu same as my version, this is my info.
Version main: 3.16.110.4
Tampered
Unlocked
VLE PVT SHIP S-ON RL
HBOOT - 2.13.0000
RADIO - 1.11.50.05.28
OpenDSP -v31.1.0.45.0815
eMMC-boot
I tried the instructions on androidforums dot com, can't post the link here cus it's one of my first posts, but I typed in google "HTC one s ruu" and it was the first link.
But at the end it said something like "Can't flash this image, find the correct image" or something along those lines.
I used this ruu at the time because it was the only similar one (although not exact) to my phone.
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
and yes I did lock my bootloader before running the ruu, but I unlocked it again just for use until I can find a working solution to going back to stock rom. (Btw i'm S-ON!)
Any help would be MASSIVELY appreciated!
Do you know your CID? You can get this info in bootloader mode and use this command:
Code:
fastboot getvar all
Please post all data except your IMEI number.
The RUU you used should work for almost any European countries as long as it's an non-carrier specific phone.
kdd998 said:
Do you know your CID? You can get this info in bootloader mode and use this command:
Code:
fastboot getvar all
Please post all data except your IMEI number.
The RUU you used should work for almost any European countries as long as it's an non-carrier specific phone.
Click to expand...
Click to collapse
Thanks for your reply Yeh my CID is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.13.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.110.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT275W400818
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: good
(bootloader) battery-voltage: 3823mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-26dff973
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I guess you can't use this RUU for this phone. Try to find one for T-Mobile UK as it seems to be what your CID is telling.
Hi Guyz,
I am really stuck and I have tried every possible solution online but unable to solve it. I have HTC Sensation Pyramid stuck in boot loop. Although I am able to boot into bootloader but unable to do anything else. Its board was replaced so default HTC Dev Unlock don't work. Every other solution require to boot into the ROM and enable debugging for ADB like JuopunutBear S-OFF and Rumrunner.
Here are the details from fastoot getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.45.401.3
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359***********
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4117mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Any help will be highly appreciated, Thanks
Aero.
According your current device status your device should have been S-OFFed before.
As I can see you have SuperCID and your hboot version is higher than it should be as long as you probably had installed a European RUU and it should have an earlier version of hboot.
So the only solution for you will be to flash an official pyramid RUU for any carrier you like with version-main 1.45.401.3 or greater.
You can find Pyramid RUU's here.
I would sugest you to install the lattest RUU for the carrier of your choice.If you want a European RUU you can download a 3.33 fireware and S-OFF your device.
Juopunutbear S-OFF [NO HTCDEV UNLOCK]
Rumrunner S-OFF [NO NEED HTCDEV UNLOCK/NO WIRE TRICK]
Gatosbil said:
According your current device status your device should have been S-OFFed before.
As I can see you have SuperCID and your hboot version is higher than it should be as long as you probably had installed a European RUU and it should have an earlier version of hboot.
So the only solution for you will be to flash an official pyramid RUU for any carrier you like with version-main 1.45.401.3 or greater.
You can find Pyramid RUU's here.
I would sugest you to install the lattest RUU for the carrier of your choice.If you want a European RUU you can download a 3.33 fireware and S-OFF your device.
Juopunutbear S-OFF [NO HTCDEV UNLOCK]
Rumrunner S-OFF [NO NEED HTCDEV UNLOCK/NO WIRE TRICK]
Click to expand...
Click to collapse
Hi Gatosbil,
Thank you so soo much for the reply and to be honest, after trying everything on net, I put my phone in my "history box" lol... but you gave me hope that I might resurrect it back to life. Well, it does came back to life!! RUU 1.45.401.3 gave me Signature Error so I tried downloading and install 3.33.401.6 with success. And its alive now!!! Thanks to you
Now the S-OFF part, Juopunutbear require Ubuntu and I had a very bad experience with that as by running windows 10 and ubuntu on same system, my hard drive crashed and I lost a lot of data. Yes Live CD might work, but my laptop is 2 years old and I haven't used DVD-Rom for a long time and its not reading data from any CD or DVD. And Rumrunner website is giving Database error so I can not download anything from there until they fix the website. I will keep checking and as soon as its back, I will try Rumrunner to S-OFF and will let you know how it goes.
Here is the current Fastboot getvar all details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.561s
Thanks Again and Best Regards,
Aero.
Aerocaria said:
Hi Gatosbil,
Thank you so soo much for the reply and to be honest, after trying everything on net, I put my phone in my "history box" lol... but you gave me hope that I might resurrect it back to life. Well, it does came back to life!! RUU 1.45.401.3 gave me Signature Error so I tried downloading and install 3.33.401.6 with success. And its alive now!!! Thanks to you
Now the S-OFF part, Juopunutbear require Ubuntu and I had a very bad experience with that as by running windows 10 and ubuntu on same system, my hard drive crashed and I lost a lot of data. Yes Live CD might work, but my laptop is 2 years old and I haven't used DVD-Rom for a long time and its not reading data from any CD or DVD. And Rumrunner website is giving Database error so I can not download anything from there until they fix the website. I will keep checking and as soon as its back, I will try Rumrunner to S-OFF and will let you know how it goes.
Here is the current Fastboot getvar all details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.561s
Thanks Again and Best Regards,
Aero.
Click to expand...
Click to collapse
i will send the juopuntubear files(windows) for S-OFF via pm
but know this i don't think it will work on win10
Hey there people!
I just got a HTC Sensation, which is currently bricked on 3.33.401.53, S-ON, unlocked bootloader and a CID = Y13.
I can't find anywhere on the internet, even on paying sites, the correct RUU to restore it, and I can't use any RUU because it's CID-locked and S-ON...
I can flash a custom recovery (I tried TWRP), but of course I can't flash any custom ROM because the phone is S-ON.
Is there any way I can save it, or am I left with a somehow expensive paperweight?
Below is the full result of a fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.53
(bootloader) serialno: SH164V804387
(bootloader) imei: 356440045391883
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3736mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks in advance for any help!
Spigaw said:
I tried TWRP
Click to expand...
Click to collapse
If you are using TWRP you need to flash the boot.img from your PC
4EXT Recovery allows you to flash the boot.img without a PC
Go to Tools in the menu of this receiver and scroll to the bottom and click "Enable 4EXT Smartflash".
You can also with S-ON and Unlock change the CID with the command
Code:
fastboot oem writecid HTC_A07
and flash Europe RUU
I have attached 4EXT Recovery to the attachment
Also with the help of this script under Windows you can get Root rights on the stock ROM and perform S-OFF with JuopunutBear
Then get SuperCID and SuperMID and forget about all restrictions
Also you cannot install RUU with S-ON and Unlocked bootloader
To install RUU you need:S-ON and Locked (use fastboot oem lock) or S-OFF and it does not matter Locked or Unlocked