Hi, I need some help going back to stock rom on my htc one s (s4).
I've read some places that I need an Ruu same as my version, this is my info.
Version main: 3.16.110.4
Tampered
Unlocked
VLE PVT SHIP S-ON RL
HBOOT - 2.13.0000
RADIO - 1.11.50.05.28
OpenDSP -v31.1.0.45.0815
eMMC-boot
I tried the instructions on androidforums dot com, can't post the link here cus it's one of my first posts, but I typed in google "HTC one s ruu" and it was the first link.
But at the end it said something like "Can't flash this image, find the correct image" or something along those lines.
I used this ruu at the time because it was the only similar one (although not exact) to my phone.
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
and yes I did lock my bootloader before running the ruu, but I unlocked it again just for use until I can find a working solution to going back to stock rom. (Btw i'm S-ON!)
Any help would be MASSIVELY appreciated!
Do you know your CID? You can get this info in bootloader mode and use this command:
Code:
fastboot getvar all
Please post all data except your IMEI number.
The RUU you used should work for almost any European countries as long as it's an non-carrier specific phone.
kdd998 said:
Do you know your CID? You can get this info in bootloader mode and use this command:
Code:
fastboot getvar all
Please post all data except your IMEI number.
The RUU you used should work for almost any European countries as long as it's an non-carrier specific phone.
Click to expand...
Click to collapse
Thanks for your reply Yeh my CID is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.13.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.110.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT275W400818
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: good
(bootloader) battery-voltage: 3823mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-26dff973
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I guess you can't use this RUU for this phone. Try to find one for T-Mobile UK as it seems to be what your CID is telling.
Related
I found out that problem i was having with my touchscreen is hardware related, so I want to get my mobile phone back to full stock. I read so many things about installing RUU, flashing this, flashing that, hboot this that i'm totally lost going true 10+ topics. If anyone could help with some direct instructions, would own you big time.
Current rom: Cynagonmod9 (latest one)
Unlocked bootloader (htcdev)
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADION-3822.10.08.04_M
eMMC-boot
Anyone know what to do with my current setup to get stock ROM back? If you need any further info about my mobile let me know ... rather desperate at the moment!
My phone is waiting for exactly the same operation, with exactly the same problem. I just have to find some time.
I will try this. Have you found it?
http://forum.xda-developers.com/showthread.php?t=1318919
Okay so i tried the following things:
- Create a goldcard
- lock bootloader (fastboot oem lock)
- install RUU from fastboot (with the .exe)
I always get Error 140: wrong bootloader version I use latest Europe RUU
No matter what, the 140 error keeps returning. Here is some more info of my phone, if sombody could give me some more guidlines, really need them
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) serialno: SH1BWTJ02396
(bootloader) imei: 358967043591260
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4192mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
*UPDATE:
Got it fixed, had to change misc_version in the process
Hello Sagas ,
I got a problem with a Desire S: It only boots up to the HTC-Logo. If I'm right because of the output of fastboot getvar all the mistake was to flash RUU_Saga_S_HTC_Europe_2.10.401.9_Radio_20.4801.30.0822U_3822.10.... (I think it was this RUU because this is the only one with the exact main version) to this device because it hast a T-Mobile (DE) Branding.
The Bootloader shows up with
Code:
*** Security Warning ***
SAGA PVT SHIP S-ON RL
HBOOT-0.98.0000
RADIO-3822.10.08.04_M
eMMC-boot
bla
fastboot getvar all shows
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0000
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.10.401.9
(bootloader) serialno: blabla
(bootloader) imei: blabla
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 3969mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 361a7ba6
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
-> T-Mobile-Branding
I tried to flash RUU_Saga_TMO_DE_1.30.111.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_178580_signed but I get an error like 140 Bootloader Version Error
Then I tried to put the zip as PG88IMG.zip on sdcard.
Result in Bootloader: MAIN VERSION IS OLDER
Any tips for me?
Sorry if you get a little excited after seeing a reply in this thread but I would remove your serial number and IMEI from your first post as everyone can see this and I don't think you want some people to know it
I always thought it was a security risk but if it isn't then someone let me know
zedlor said:
Sorry if you get a little excited after seeing a reply in this thread [..]
Click to expand...
Click to collapse
You are f*ckin' right :-D.
zedlor said:
[..] but I would remove your serial number and IMEI from your first post as everyone can see this and I don't think you want some people to know it
Click to expand...
Click to collapse
Done, for sure,thank you .
I'm really helpless, because not even someone tells me that the device is broken. Am I right with the idea that a RUU with the mentioned main version from T-Mobile (DE) can fix my problem?
SOLVED! I made a Goldcard with my Nexus One, flashed the rom.zip of the newest HTC Europe RUU over SD and... solved
Sent from my Nexus One using xda premium
Hi everyone.
I'm trying to get back on stock (S4), but I can't find any RUU that matches my hboot and radio.
this is the result of fastboot getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4005mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I tried several S4 RUUs, european ones gave me error 131, Vodafone UK gave error 155 (the cellphone was bought in Italy).
What I did before executing the RUU exe(s) was just locking the bootloader. I think that probably installing ROMs in the time (the cellphone belongs to a friend of mine, so I don't know what was installed before) may have somewhat changed hboot (and/or radio) version, and now I can't find a RUU matching mine. Now i can only access the bootloader (I think the previous custom recovery is gone). I managed to access recovery by unlocking again the bootloader, but I can't mount any partition from the recovery (which is the main problem that lead me to decide to get back to stock.
What are my chances to return to HTC stock?
I have the same problem
Hi mate, I'm italian too. I suggest you to get S-Off (it's easy enough now with the brand new tools), change cid with fastboot command to HTC__001 and flash latest JB 4.1 european RUU. It's pretty easy
addsfsds said:
Hi mate, I'm italian too. I suggest you to get S-Off (it's easy enough now with the brand new tools), change cid with fastboot command to HTC__001 and flash latest JB 4.1 european RUU. It's pretty easy
Click to expand...
Click to collapse
I am very new to htc rooting and other stuff. kindly provide stepwise procedure with links to the tools and appropriate RUU
I have tried hit & trial but i am unable to get to stock
hasanalikhattak said:
I am very new to htc rooting and other stuff. kindly provide stepwise procedure with links to the tools and appropriate RUU
I have tried hit & trial but i am unable to get to stock
Click to expand...
Click to collapse
Dude give a quick look around, all the guides are here! or come to androidiani.com to get italian translated guides and support!
I'm trying to get my HTC Sensation to boot one of the 4.4 CyanogenMod unsupported ROM's, and after going through several walkthroughs I found here, I realized I had to upgrade my firmware before I could do that. So I used the "fastboot oem lock" command and reloaded a stock ROM using an RUU process. Now I'm ready to load one of the new CM ROM's, but I can't flash any boot image until I unlock the bootloader again. I tried using the HTCDev process again using my original Unlock_code.bin as well as a newly generated Unlock_code.bin, but no luck. I feel like this is the last speed bump to get over. Here are the results of my "getvar all":
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: HT162T527781
(bootloader) imei: 355066041626260
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4182mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
When I go into the bootloader it currently says:
Code:
*** RELOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34
Any ideas of how I can unlock the bootloader long enough to flash a boot image? Any advice is much appreciated!
roswell1329 said:
I'm trying to get my HTC Sensation to boot one of the 4.4 CyanogenMod unsupported ROM's, and after going through several walkthroughs I found here, I realized I had to upgrade my firmware before I could do that. So I used the "fastboot oem lock" command and reloaded a stock ROM using an RUU process. Now I'm ready to load one of the new CM ROM's, but I can't flash any boot image until I unlock the bootloader again. I tried using the HTCDev process again using my original Unlock_code.bin as well as a newly generated Unlock_code.bin, but no luck. I feel like this is the last speed bump to get over. Here are the results of my "getvar all":
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.106
(bootloader) serialno: *************
(bootloader) imei: **********
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4182mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
When I go into the bootloader it currently says:
Code:
*** RELOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34
Any ideas of how I can unlock the bootloader long enough to flash a boot image? Any advice is much appreciated!
Click to expand...
Click to collapse
since you are on S-OFF flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
after that install a custom recovery and flash a custom rom from it
you don't need to flash the custom rom's boot.img because you are on S-OFF
by the way you could just flash 3.33 universal in first place and avoiding the ruu process
note:remove you imei and s/n
don't show them in public
rzr86 said:
since you are on S-OFF flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
after that install a custom recovery and flash a custom rom from it
you don't need to flash the custom rom's boot.img because you are on S-OFF
by the way you could just flash 3.33 universal in first place and avoiding the ruu process
note:remove you imei and s/n
don't show them in public
Click to expand...
Click to collapse
That was it! Thank you very much. It's running like a champ now.
Hi Guyz,
I am really stuck and I have tried every possible solution online but unable to solve it. I have HTC Sensation Pyramid stuck in boot loop. Although I am able to boot into bootloader but unable to do anything else. Its board was replaced so default HTC Dev Unlock don't work. Every other solution require to boot into the ROM and enable debugging for ADB like JuopunutBear S-OFF and Rumrunner.
Here are the details from fastoot getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.45.401.3
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359***********
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4117mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Any help will be highly appreciated, Thanks
Aero.
According your current device status your device should have been S-OFFed before.
As I can see you have SuperCID and your hboot version is higher than it should be as long as you probably had installed a European RUU and it should have an earlier version of hboot.
So the only solution for you will be to flash an official pyramid RUU for any carrier you like with version-main 1.45.401.3 or greater.
You can find Pyramid RUU's here.
I would sugest you to install the lattest RUU for the carrier of your choice.If you want a European RUU you can download a 3.33 fireware and S-OFF your device.
Juopunutbear S-OFF [NO HTCDEV UNLOCK]
Rumrunner S-OFF [NO NEED HTCDEV UNLOCK/NO WIRE TRICK]
Gatosbil said:
According your current device status your device should have been S-OFFed before.
As I can see you have SuperCID and your hboot version is higher than it should be as long as you probably had installed a European RUU and it should have an earlier version of hboot.
So the only solution for you will be to flash an official pyramid RUU for any carrier you like with version-main 1.45.401.3 or greater.
You can find Pyramid RUU's here.
I would sugest you to install the lattest RUU for the carrier of your choice.If you want a European RUU you can download a 3.33 fireware and S-OFF your device.
Juopunutbear S-OFF [NO HTCDEV UNLOCK]
Rumrunner S-OFF [NO NEED HTCDEV UNLOCK/NO WIRE TRICK]
Click to expand...
Click to collapse
Hi Gatosbil,
Thank you so soo much for the reply and to be honest, after trying everything on net, I put my phone in my "history box" lol... but you gave me hope that I might resurrect it back to life. Well, it does came back to life!! RUU 1.45.401.3 gave me Signature Error so I tried downloading and install 3.33.401.6 with success. And its alive now!!! Thanks to you
Now the S-OFF part, Juopunutbear require Ubuntu and I had a very bad experience with that as by running windows 10 and ubuntu on same system, my hard drive crashed and I lost a lot of data. Yes Live CD might work, but my laptop is 2 years old and I haven't used DVD-Rom for a long time and its not reading data from any CD or DVD. And Rumrunner website is giving Database error so I can not download anything from there until they fix the website. I will keep checking and as soon as its back, I will try Rumrunner to S-OFF and will let you know how it goes.
Here is the current Fastboot getvar all details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.561s
Thanks Again and Best Regards,
Aero.
Aerocaria said:
Hi Gatosbil,
Thank you so soo much for the reply and to be honest, after trying everything on net, I put my phone in my "history box" lol... but you gave me hope that I might resurrect it back to life. Well, it does came back to life!! RUU 1.45.401.3 gave me Signature Error so I tried downloading and install 3.33.401.6 with success. And its alive now!!! Thanks to you
Now the S-OFF part, Juopunutbear require Ubuntu and I had a very bad experience with that as by running windows 10 and ubuntu on same system, my hard drive crashed and I lost a lot of data. Yes Live CD might work, but my laptop is 2 years old and I haven't used DVD-Rom for a long time and its not reading data from any CD or DVD. And Rumrunner website is giving Database error so I can not download anything from there until they fix the website. I will keep checking and as soon as its back, I will try Rumrunner to S-OFF and will let you know how it goes.
Here is the current Fastboot getvar all details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.561s
Thanks Again and Best Regards,
Aero.
Click to expand...
Click to collapse
i will send the juopuntubear files(windows) for S-OFF via pm
but know this i don't think it will work on win10