HTC Sensation Pyramid -- Boot Loop -- S-On -- Replaced Board - HTC Sensation

Hi Guyz,
I am really stuck and I have tried every possible solution online but unable to solve it. I have HTC Sensation Pyramid stuck in boot loop. Although I am able to boot into bootloader but unable to do anything else. Its board was replaced so default HTC Dev Unlock don't work. Every other solution require to boot into the ROM and enable debugging for ADB like JuopunutBear S-OFF and Rumrunner.
Here are the details from fastoot getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.45.401.3
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359***********
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4117mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Any help will be highly appreciated, Thanks
Aero.

According your current device status your device should have been S-OFFed before.
As I can see you have SuperCID and your hboot version is higher than it should be as long as you probably had installed a European RUU and it should have an earlier version of hboot.
So the only solution for you will be to flash an official pyramid RUU for any carrier you like with version-main 1.45.401.3 or greater.
You can find Pyramid RUU's here.
I would sugest you to install the lattest RUU for the carrier of your choice.If you want a European RUU you can download a 3.33 fireware and S-OFF your device.
Juopunutbear S-OFF [NO HTCDEV UNLOCK]
Rumrunner S-OFF [NO NEED HTCDEV UNLOCK/NO WIRE TRICK]

Gatosbil said:
According your current device status your device should have been S-OFFed before.
As I can see you have SuperCID and your hboot version is higher than it should be as long as you probably had installed a European RUU and it should have an earlier version of hboot.
So the only solution for you will be to flash an official pyramid RUU for any carrier you like with version-main 1.45.401.3 or greater.
You can find Pyramid RUU's here.
I would sugest you to install the lattest RUU for the carrier of your choice.If you want a European RUU you can download a 3.33 fireware and S-OFF your device.
Juopunutbear S-OFF [NO HTCDEV UNLOCK]
Rumrunner S-OFF [NO NEED HTCDEV UNLOCK/NO WIRE TRICK]
Click to expand...
Click to collapse
Hi Gatosbil,
Thank you so soo much for the reply and to be honest, after trying everything on net, I put my phone in my "history box" lol... but you gave me hope that I might resurrect it back to life. Well, it does came back to life!! RUU 1.45.401.3 gave me Signature Error so I tried downloading and install 3.33.401.6 with success. And its alive now!!! Thanks to you
Now the S-OFF part, Juopunutbear require Ubuntu and I had a very bad experience with that as by running windows 10 and ubuntu on same system, my hard drive crashed and I lost a lot of data. Yes Live CD might work, but my laptop is 2 years old and I haven't used DVD-Rom for a long time and its not reading data from any CD or DVD. And Rumrunner website is giving Database error so I can not download anything from there until they fix the website. I will keep checking and as soon as its back, I will try Rumrunner to S-OFF and will let you know how it goes.
Here is the current Fastboot getvar all details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.561s
Thanks Again and Best Regards,
Aero.

Aerocaria said:
Hi Gatosbil,
Thank you so soo much for the reply and to be honest, after trying everything on net, I put my phone in my "history box" lol... but you gave me hope that I might resurrect it back to life. Well, it does came back to life!! RUU 1.45.401.3 gave me Signature Error so I tried downloading and install 3.33.401.6 with success. And its alive now!!! Thanks to you
Now the S-OFF part, Juopunutbear require Ubuntu and I had a very bad experience with that as by running windows 10 and ubuntu on same system, my hard drive crashed and I lost a lot of data. Yes Live CD might work, but my laptop is 2 years old and I haven't used DVD-Rom for a long time and its not reading data from any CD or DVD. And Rumrunner website is giving Database error so I can not download anything from there until they fix the website. I will keep checking and as soon as its back, I will try Rumrunner to S-OFF and will let you know how it goes.
Here is the current Fastboot getvar all details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.561s
Thanks Again and Best Regards,
Aero.
Click to expand...
Click to collapse
i will send the juopuntubear files(windows) for S-OFF via pm
but know this i don't think it will work on win10

Related

Stay in Hboot

Please Help me
I want to Flash shiped
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
and when i run it after som step it goes to hboot and in the pc it says customer id error ERROR 131
and say my cid have error or something like that
i try
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed
but the same problem.
Iam in hboot and recovery dont work and it back to hboot
i have ******Security warning****** in top of screen
in adb when i type: fastboot devices it says
SH18NTJ02513 fastboot
and by fastboot getvar all
it says
C:\Users\MMMS>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.405.6
(bootloader) serialno: SH18NTJ02513
(bootloader) imei: 358967044858668
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3979mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
what shood i do. please help
ayene said:
Please Help me
I want to Flash shiped
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
and when i run it after som step it goes to hboot and in the pc it says customer id error ERROR 131
and say my cid have error or something like that
i try
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed
but the same problem.
Iam in hboot and recovery dont work and it back to hboot
i have ******Security warning****** in top of screen
in adb when i type: fastboot devices it says
SH18NTJ02513 fastboot
and by fastboot getvar all
it says
C:\Users\MMMS>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.405.6
(bootloader) serialno: SH18NTJ02513
(bootloader) imei: 358967044858668
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3979mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
what shood i do. please help
Click to expand...
Click to collapse
Create a goldcard and then try flash the RUU again.
tpbklake said:
Create a goldcard and then try flash the RUU again.
Click to expand...
Click to collapse
i cant go to my rom and stay in hboot.
how can i make gold card without going to rom?
Odd, your cidnum is HTC__J15, the only RUU that has that number is
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
And since your misc-version is 1.27.405.6 that RUU should flash.
I checked
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
And they don't have that cidnum.
foX2delta said:
Odd, your cidnum is HTC__J15, the only RUU that has that number is
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
And since your misc-version is 1.27.405.6 that RUU should flash.
I checked
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
And they don't have that cidnum.
Click to expand...
Click to collapse
u mean if I flash it will be ok and I dont need gold card?
Its worth a try, I personalty think it will work.
At the end of the day its worth a try, it has merit.
foX2delta said:
Its worth a try, I personalty think it will work.
At the end of the day its worth a try, it has merit.
Click to expand...
Click to collapse
yes yes yes yes. it worked. U R nice man.
just how could i khnow the cid code of e rom?
and can i change my cid ofter s-off and reinstall other ruu?
When you extract the rom.zip (run RUU and go to the temp folder for rom.zip) inside the android-info.txt file.
Yes you can change your cid once you have s-offed and then install the RUU of choice (thats if you like being s-on and stock.
However you better make a goldcard just incase and if I were you i'd s-off and flash sense 3 roms if thats what you want.
Same Problem
Hey,
I have same problem and i have not fixed yet.
Here is some solution about making goldcard, maybe it can help.
And this is my subject follow it maybe somebody help me first..
good luck.
Why not use custom roms or at least pre rooted stock roms?!
Sent from my HTC Desire S using xda premium

[Q] Unlocked bootloader, HBOOT-2.00.0002 back to STOCKrom

I found out that problem i was having with my touchscreen is hardware related, so I want to get my mobile phone back to full stock. I read so many things about installing RUU, flashing this, flashing that, hboot this that i'm totally lost going true 10+ topics. If anyone could help with some direct instructions, would own you big time.
Current rom: Cynagonmod9 (latest one)
Unlocked bootloader (htcdev)
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADION-3822.10.08.04_M
eMMC-boot
Anyone know what to do with my current setup to get stock ROM back? If you need any further info about my mobile let me know ... rather desperate at the moment!
My phone is waiting for exactly the same operation, with exactly the same problem. I just have to find some time.
I will try this. Have you found it?
http://forum.xda-developers.com/showthread.php?t=1318919
Okay so i tried the following things:
- Create a goldcard
- lock bootloader (fastboot oem lock)
- install RUU from fastboot (with the .exe)
I always get Error 140: wrong bootloader version I use latest Europe RUU
No matter what, the 140 error keeps returning. Here is some more info of my phone, if sombody could give me some more guidlines, really need them
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) serialno: SH1BWTJ02396
(bootloader) imei: 358967043591260
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4192mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
*UPDATE:
Got it fixed, had to change misc_version in the process

[Q] Need Help! ONE S RUU for 3.01 needed (SOLVED)

Probably bricked my phone. Updated System to Hboot 3.01, wiped Cache AND Systen (I know, I am a dumbass), installed Recover and PACMAN, now I have a endless bootloop.
Anyone a RUU for my device?
RUU_VILLEC2_U_ICS_40_S_HTC_Europe_2.15.401.100_Radio_16.21.20.02U_16.09.20.11_M2_release_286571_signed.exe will not work, as long my installed hboot Version is higher
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.01.0000
(bootloader) version-baseband: 16.15.20.29_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid:
(bootloader) product: villec2
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PJ4020000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4085mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
and YES, I relocked the device prior RUU. Just the wrong Version!
What can I do?
Maybe that's what ya need
http://www.androidruu.com/getdownlo...0.03U_16.11.20.24_M_release_310730_signed.exe
But ya had to chance your cid for that....
Thanks for Help, i download this. But never changed CID before. So it will be a solution, if I will not find the right RUU.
But as long I have HTC_102, there SHOULD be a RUU for this one; it is HTC Stock. May be someone can help.
IMO that's the only available c2 JB Rom released by htc...
Just tried to change the CID by command "fastboot oem writecid 11111111" - did not work.
Seems I have a problem...
Result:
(bootloader) villec2_init_sd, SD card already power on
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) 902910 902E20
FAILED (status read failed (Too many links))
finished. total time: 1.305s
(this mobile has only internal flash, no SD)
Are you s-off?
Cause fastboot command only works with s-off...
Else ya have to chance cid by hexedit the mmcblk0p4 partition...
Search for the super CID thread....
s-off for Villec2? You will win the 1st price if you can handle this... :good:
I wonder, if I could handle this with a OTA and another RUU?
I.e. combine UK RUU and some files of a HTC__102 OTA ? Is there a way?
Solved the problem!
Found the tutorial "[Tutorial][S4/S3] How to use OTA zip to get back to Stock OS", and this guy saved my Ass!
Thanks for great Support!
dagolard said:
Probably bricked my phone. Updated System to Hboot 3.01, wiped Cache AND Systen (I know, I am a dumbass), installed Recover and PACMAN, now I have a endless bootloop.
Anyone a RUU for my device?
RUU_VILLEC2_U_ICS_40_S_HTC_Europe_2.15.401.100_Radio_16.21.20.02U_16.09.20.11_M2_release_286571_signed.exe will not work, as long my installed hboot Version is higher
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.01.0000
(bootloader) version-baseband: 16.15.20.29_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid:
(bootloader) product: villec2
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PJ4020000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4085mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
and YES, I relocked the device prior RUU. Just the wrong Version!
What can I do?
Click to expand...
Click to collapse
Do you have RUU for 16.15.20.29_M baseband ? I cannot return to stock, this topic links are Dead http://forum.xda-developers.com/showthread.php?t=2394165
We have the same getvar info only cid changes. Mine is HTC__032
No, sorry. I have a Lenovo now...
Btw. can you access the recovery menu with the volume- or volume+ key?
Maybe I find a backup of my phone...

[Q] Can't update HBoot or roms

I have a T-Mobile HTC One and I am trying to get it updated to something other than stock. Right now I have CM 10.0.0 running but none of the gapps will work (all crashing and play store won't load - just says retry). I can't get any other roms to work. I think my main problem is that HBOOT is showing 1.14.005 and I have S-ON. I can't get any RUU program to work. They are all failing. I can ADB push and fastboot flash but nothing seems to work. I can't seem to find what I am missing. I just would like to get a complete working rom without the HTC stuff on it.
1. How do I get S-off?
2. how do I update Hboot?
3. are there any rims that will work with the old hboot that I can just flash right now that will work with all of the Google apps?
I just need this phone to last my daughter another 4 months. I thought I could just put a clean rom on this one and get her up and running. 2 days and 100 flashes and pushes and I am worse off than I was! I don't care what version of Android it is running as long as it is JB or higher.
Settings:
*** Unlocked ***
VLE PVT SHIP S-ON RL
HBOOT-1.14.0005
RADIO-1.13.50.05.25
OpenDSP-v29.1.0.45.0622
eMMC-boot
Nov 21 2012, 12:17:41
TWRP 2.8.1.1
Update: When I run RUU I get the From version of the ROM as =2.35.531.7 and it wants to use Image version: 1.84.531.2. It fails of course.
When I do Getvar I get the following:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.14.0005
(bootloader) version-baseband: 1.13.50.05.25
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.35.531.12
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3843mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 8be28a51
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I cannot get anything to run correctly. Any suggestions on what ROM to try that will work with this version? I just want it to boot and run with Google apps. Nothing fancy!
Any help is appreciated.
cyberpyr8 said:
Update: When I run RUU I get the From version of the ROM as =2.35.531.7 and it wants to use Image version: 1.84.531.2. It fails of course.
When I do Getvar I get the following:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.14.0005
(bootloader) version-baseband: 1.13.50.05.25
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.35.531.12
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3843mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 8be28a51
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I cannot get anything to run correctly. Any suggestions on what ROM to try that will work with this version? I just want it to boot and run with Google apps. Nothing fancy!
Any help is appreciated.
Click to expand...
Click to collapse
First you need to flash stock recovery, the you have to relock the bootloader. Once done you can flash the latest RUU or HBoot update. With updated HBoot you can unlock the bootloader again, flash TWRP and a custom rom.
Here you can find the stock recovery
and the latest RUUs (2nd post) --> LINK

Setting s-off

Sorry if I am posting this in the incorrect forum. This is my first posting,
Anyway, I have a T-Mobile HTC One S ville and have been trying to set s-off so I can install the Lineage ROM. I rooted and unlocked the phone and installed the CM-12.1 Rom without any problems. Unfortunately, when I tried to run the Sunshine app, I discovered (too late) that the phone must be running its stock rom or near-stock rom. After many attempts to find a stock rom, I successfully installed MaximusHD 10.0.0, but am unable to install the firmware, so I am unable to obtain a wifi connection due to authentication problems. I then tethered the phone to my laptop and was able to gain internet access, and the Sunshine app ran successfully for the first set of tests. When Sunshine attempted to run the next set of tests, it disconnected the tether. So I am stuck on how to proceed.
Here are the getvar readings:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.13.50.05.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA2A4W401369
(bootloader) imei: 352636053246893
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4197mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Any help will be greatly appreciated.
Thanks,
Greg
You're in luck my friend, I'm in the same boat as you trying to get this thing running good to play some old Android games.
https://androidfilehost.com/?fid=95832962473394309
Let me know if you get S-Off, there seems to be carrier resrictions on our TMO devices. I've thought about extracting the ROM.zip of a Global RUU, and flashing it through fastboot manually, but don't want to brick my phone haha.

Categories

Resources